Fault Diagnosis of Rotating Machinery Using an Optimal Blind Deconvolution Method and Hybrid Invertible Neural Network.

This paper proposes a novel approach to predicting the useful life of rotating machinery and making fault diagnoses using an optimal blind deconvolution and hybrid invertible neural network. First, a new optimal adaptive maximum second-order cyclostationarity blind deconvolution (OACYCBD) is developed for denoising vibration signals obtained from rotating machinery. This technique is obtained from the optimization of traditional adaptive maximum second-order cyclostationarity blind deconvolution (ACYCBD). To optimize the weights of conventional ACYCBD, the proposed method utilizes a probability density function (PDF) of Monte Carlo to assess fault-related incipient changes in the vibration signal. Cross-entropy is used as a convergence criterion for denoising. Because the denoised signal carries information related to the health of the rotating machinery, a novel health index is calculated in the second step using the peak value and square of the arithmetic mean of the signal. The novel health index can change according to the degradation of the health state of the rotating bearing. To predict the remaining useful life of the bearing in the final step, the health index is used as input for a newly developed hybrid invertible neural network (HINN), which combines an invertible neural network and long short-term memory (LSTM) to forecast trends in bearing degradation. The proposed approach outperforms SVM, CNN, and LSTM methods in predicting the remaining useful life of bearings, showcasing RMSE values of 0.799, 0.593, 0.53, and 0.485, respectively, when applied to a real-world industrial bearing dataset.

Fault Diagnosis in Centrifugal Pumps: A Dual-Scalogram Approach with Convolution Autoencoder and Artificial Neural Network.

This paper proposes a new fault diagnosis method for centrifugal pumps by combining signal processing with deep learning techniques. Centrifugal pumps facilitate fluid transport through the energy generated by the impeller. Throughout the operation, variations in the fluid pressure at the pump's inlet may impact the generalization of traditional machine learning models trained on raw statistical features. To address this concern, first, vibration signals are collected from centrifugal pumps, followed by the application of a lowpass filter to isolate frequencies indicative of faults. These signals are then subjected to a continuous wavelet transform and Stockwell transform, generating two distinct time-frequency scalograms. The Sobel filter is employed to further highlight essential features within these scalograms. For feature extraction, this approach employs two parallel convolutional autoencoders, each tailored for a specific scalogram type. Subsequently, extracted features are merged into a unified feature pool, which forms the basis for training a two-layer artificial neural network, with the aim of achieving accurate fault classification. The proposed method is validated using three distinct datasets obtained from the centrifugal pump under varying inlet fluid pressures. The results demonstrate classification accuracies of 100%, 99.2%, and 98.8% for each dataset, surpassing the accuracies achieved by the reference comparison methods.

The Prediction of the Remaining Useful Life of Rotating Machinery Based on an Adaptive Maximum Second-Order Cyclostationarity Blind Deconvolution and a Convolutional LSTM Autoencoder.

The prediction of the remaining useful life (RUL) is important for the conditions of rotating machinery to maintain reliability and decrease losses. This study proposes an efficient approach based on an adaptive maximum second-order cyclostationarity blind deconvolution (ACYCBD) and a convolutional LSTM autoencoder to achieve the feature extraction, health index analysis, and RUL prediction for rotating machinery. First, the ACYCBD is used to filter noise from the vibration signals. Second, based on the peak value properties, a novel health index (HI) is designed to analyze the health conditions for the denoising signal, showing a high sensitivity for the degradation of bearings. Finally, for better prognostics and health management of the rotating machinery, based on convolutional layers and LSTM, an autoencoder can achieve a transform convolutional LSTM network to develop a convolutional LSTM autoencoder (ALSTM) model that can be applied to forecast the health trend for rotating machinery. Compared with the SVM, CNN, LSTM, GRU, and DTGRU methods, our experiments demonstrate that the proposed approach has the greatest performance for the prediction of the remaining useful life of rotating machinery.

Fault Diagnosis of a Multistage Centrifugal Pump Using Explanatory Ratio Linear Discriminant Analysis.

This study introduces an innovative approach for fault diagnosis of a multistage centrifugal pump (MCP) using explanatory ratio (ER) linear discriminant analysis (LDA). Initially, the method addresses the challenge of background noise and interference in vibration signals by identifying a fault-sensitive frequency band (FSFB). From the FSFB, raw hybrid statistical features are extracted in time, frequency, and time-frequency domains, forming a comprehensive feature pool. Recognizing that not all features adequately represent MCP conditions and can reduce classification accuracy, we propose a novel ER-LDA method. ER-LDA evaluates feature importance by calculating the explanatory ratio between interclass distance and intraclass scatteredness, facilitating the selection of discriminative features through LDA. This fusion of ER-based feature assessment and LDA yields the novel ER-LDA technique. The resulting selective feature set is then passed into a k-nearest neighbor (K-NN) algorithm for condition classification, distinguishing between normal, mechanical seal hole, mechanical seal scratch, and impeller defect states of the MCP. The proposed technique surpasses current cutting-edge techniques in fault classification.

Pipeline Leak Detection: A Comprehensive Deep Learning Model Using CWT Image Analysis and an Optimized DBN-GA-LSSVM Framework.

Detecting pipeline leaks is an essential factor in maintaining the integrity of fluid transport systems. This paper introduces an advanced deep learning framework that uses continuous wavelet transform (CWT) images for precise detection of such leaks. Transforming acoustic signals from pipelines under various conditions into CWT scalograms, followed by signal processing by non-local means and adaptive histogram equalization, results in new enhanced leak-induced scalograms (ELIS) that capture detailed energy fluctuations across time-frequency scales. The fundamental approach takes advantage of a deep belief network (DBN) fine-tuned with a genetic algorithm (GA) and unified with a least squares support vector machine (LSSVM) to improve feature extraction and classification accuracy. The DBN-GA framework precisely extracts informative features, while the LSSVM classifier precisely distinguishes between leaky and non-leak conditions. By concentrating solely on the advanced capabilities of ELIS processed through an optimized DBN-GA-LSSVM model, this research achieves high detection accuracy and reliability, making a significant contribution to pipeline monitoring and maintenance. This innovative approach to capturing complex signal patterns can be applied to real-time leak detection and critical infrastructure safety in several industrial applications.

Exogenously applied nicotinic acid alleviates drought stress by enhancing morpho-physiological traits and antioxidant defense mechanisms in wheat.

Across the globe, the frequent occurrence of drought spells has significantly undermined the sustainability of modern high-input farming systems, particularly those focused on staple crops like wheat. To ameliorate the deleterious impacts of drought through a biologically viable and eco-friendly approach, a study was designed to explore the effect of nicotinic acid on different metabolic, and biochemical processes, growth and yield of wheat under optimal moisture and drought stress (DS). The current study was comprised of different levels of nicotinic acid applied as foliar spray (0 g L-1, 0.7368, 1.477, 2.2159 g L-1) and fertigation (0.4924, 0.9848, and 1.4773 g L-1) under normal conditions and imposed drought by withholding water at anthesis stage. The response variables were morphological traits such as roots and shoots characteristics, yield attributes, grain and biological yields along with biosynthesis of antioxidants. The results revealed that nicotinic acid dose of 2.2159 g L-1 out-performed rest of treatments under both normal and DS. The same treatment resulted in the maximum root growth (length, fresh and dry weights, surface area, diameter) and shoot traits (length, fresh and dry weights) growth. Additionally, foliar applied nicotinic acid (2.2159 g L-1) also produced as the highest spike length, grains spike-1, spikelet's spike-1 and weight of 1000 grains. Moreover, these better yield attributes led to significantly higher grain yield and biological productivity of wheat. Likewise in terms of physiological growth of wheat under DS, the same treatment remained superior by recording the highest SPAD value, relative water content, water potential of leaves, leaf area, stomatal conductance (292 mmolm-2S-1), internal carbon dioxide concentration, photosynthesis and transpiration rate. Interestingly, exogenously applied nicotinic acid remained effective in triggering the antioxidant system of wheat by recording significantly higher catalase, peroxidase, superoxide dismutase and ascorbate peroxidase.

Leak State Detection and Size Identification for Fluid Pipelines with a Novel Acoustic Emission Intensity Index and Random Forest.

In this paper, an approach to perform leak state detection and size identification for industrial fluid pipelines with an acoustic emission (AE) activity intensity index curve (AIIC), using b-value and a random forest (RF), is proposed. Initially, the b-value was calculated from pre-processed AE data, which was then utilized to construct AIICs. The AIIC presents a robust description of AE intensity, especially for detecting the leaking state, even with the complication of the multi-source problem of AE events (AEEs), in which there are other sources, rather than just leaking, contributing to the AE activity. In addition, it shows the capability to not just discriminate between normal and leaking states, but also to distinguish different leak sizes. To calculate the probability of a state change from normal condition to leakage, a changepoint detection method, using a Bayesian ensemble, was utilized. After the leak is detected, size identification is performed by feeding the AIIC to the RF. The experimental results were compared with two cutting-edge methods under different scenarios with various pressure levels and leak sizes, and the proposed method outperformed both the earlier algorithms in terms of accuracy.

A Technique for Centrifugal Pump Fault Detection and Identification Based on a Novel Fault-Specific Mann-Whitney Test.

This work presents a technique for fault detection and identification in centrifugal pumps (CPs) using a novel fault-specific Mann-Whitney test (FSU Test) and K-nearest neighbor (KNN) classification algorithm. Traditional fault indicators, such as the mean, peak, root mean square, and impulse factor, lack sensitivity in detecting incipient faults. Furthermore, for defect identification, supervised models rely on pre-existing knowledge about pump defects for training purposes. To address these concerns, a new centrifugal pump fault indicator (CPFI) that does not rely on previous knowledge is developed based on a novel fault-specific Mann-Whitney test. The new fault indicator is obtained by decomposing the vibration signature (VS) of the centrifugal pump hierarchically into its respective time-frequency representation using the wavelet packet transform (WPT) in the first step. The node containing the fault-specific frequency band is selected, and the Mann-Whitney test statistic is calculated from it. The combination of hierarchical decomposition of the vibration signal for fault-specific frequency band selection and the Mann-Whitney test form the new fault-specific Mann-Whitney test. The test output statistic yields the centrifugal pump fault indicator, which shows sensitivity toward the health condition of the centrifugal pump. This indicator changes according to the working conditions of the centrifugal pump. To further enhance fault detection, a new effect ratio (ER) is introduced. The KNN algorithm is employed to classify the fault type, resulting in promising improvements in fault classification accuracy, particularly under variable operating conditions.

Centrifugal Pump Fault Diagnosis Based on a Novel SobelEdge Scalogram and CNN.

This paper presents a novel framework for classifying ongoing conditions in centrifugal pumps based on signal processing and deep learning techniques. First, vibration signals are acquired from the centrifugal pump. The acquired vibration signals are heavily affected by macrostructural vibration noise. To overcome the influence of noise, pre-processing techniques are employed on the vibration signal, and a fault-specific frequency band is chosen. The Stockwell transform (S-transform) is then applied to this band, yielding S-transform scalograms that depict energy fluctuations across different frequencies and time scales, represented by color intensity variations. Nevertheless, the accuracy of these scalograms can be compromised by the presence of interference noise. To address this concern, an additional step involving the Sobel filter is applied to the S-transform scalograms, resulting in the generation of novel SobelEdge scalograms. These SobelEdge scalograms aim to enhance the clarity and discriminative features of fault-related information while minimizing the impact of interference noise. The novel scalograms heighten energy variation in the S-transform scalograms by detecting the edges where color intensities change. These new scalograms are then provided to a convolutional neural network (CNN) for the fault classification of centrifugal pumps. The centrifugal pump fault classification capability of the proposed method outperformed state-of-the-art reference methods.

A Reliable Pipeline Leak Detection Method Using Acoustic Emission with Time Difference of Arrival and Kolmogorov-Smirnov Test.

This paper proposes a novel and reliable leak-detection method for pipeline systems based on acoustic emission (AE) signals. The proposed method analyzes signals from two AE sensors installed on the pipeline to detect leaks located between these two sensors. Firstly, the raw AE signals are preprocessed using empirical mode decomposition. The time difference of arrival (TDOA) is then extracted as a statistical feature of the two AE signals. The state of the pipeline (leakage/normal) is determined through comparing the statistical distribution of the TDOA of the current state with the prior normal state. Specifically, the two-sample Kolmogorov-Smirnov (K-S) test is applied to compare the statistical distribution of the TDOA feature for leak and non-leak scenarios. The K-S test statistic value in this context functions as a leakage indicator. A new criterion called leak sensitivity is introduced to evaluate and compare the performance of leak detection methods. Extensive experiments were conducted using an industrial pipeline system, and the results demonstrate the excellence of the proposed method in leak detection. Compared to traditional feature-based indicators, our approach achieves a significantly higher performance in leak detection.

A Hybrid Deep Learning Approach: Integrating Short-Time Fourier Transform and Continuous Wavelet Transform for Improved Pipeline Leak Detection.

A hybrid deep learning approach was designed that combines deep learning with enhanced short-time Fourier transform (STFT) spectrograms and continuous wavelet transform (CWT) scalograms for pipeline leak detection. Such detection plays a crucial role in ensuring the safety and integrity of fluid transportation systems. The proposed model leverages the power of STFT and CWT to enhance detection capabilities. The pipeline's acoustic emission signals during normal and leak operating conditions undergo transformation using STFT and CWT, creating scalograms representing energy variations across time-frequency scales. To improve the signal quality and eliminate noise, Sobel and wavelet denoising filters are applied to the scalograms. These filtered scalograms are then fed into convolutional neural networks, extracting informative features that harness the distinct characteristics captured by both STFT and CWT. For enhanced computational efficiency and discriminatory power, principal component analysis is employed to reduce the feature space dimensionality. Subsequently, pipeline leaks are accurately detected and classified by categorizing the reduced dimensional features using t-distributed stochastic neighbor embedding and artificial neural networks. The hybrid approach achieves high accuracy and reliability in leak detection, demonstrating its effectiveness in capturing both spectral and temporal details. This research significantly contributes to pipeline monitoring and maintenance and offers a promising solution for real-time leak detection in diverse industrial applications.

IoMT-Enabled Computer-Aided Diagnosis of Pulmonary Embolism from Computed Tomography Scans Using Deep Learning.

The Internet of Medical Things (IoMT) has revolutionized Ambient Assisted Living (AAL) by interconnecting smart medical devices. These devices generate a large amount of data without human intervention. Learning-based sophisticated models are required to extract meaningful information from this massive surge of data. In this context, Deep Neural Network (DNN) has been proven to be a powerful tool for disease detection. Pulmonary Embolism (PE) is considered the leading cause of death disease, with a death toll of 180,000 per year in the US alone. It appears due to a blood clot in pulmonary arteries, which blocks the blood supply to the lungs or a part of the lung. An early diagnosis and treatment of PE could reduce the mortality rate. Doctors and radiologists prefer Computed Tomography (CT) scans as a first-hand tool, which contain 200 to 300 images of a single study for diagnosis. Most of the time, it becomes difficult for a doctor and radiologist to maintain concentration going through all the scans and giving the correct diagnosis, resulting in a misdiagnosis or false diagnosis. Given this, there is a need for an automatic Computer-Aided Diagnosis (CAD) system to assist doctors and radiologists in decision-making. To develop such a system, in this paper, we proposed a deep learning framework based on DenseNet201 to classify PE into nine classes in CT scans. We utilized DenseNet201 as a feature extractor and customized fully connected decision-making layers. The model was trained on the Radiological Society of North America (RSNA)-Pulmonary Embolism Detection Challenge (2020) Kaggle dataset and achieved promising results of 88%, 88%, 89%, and 90% in terms of the accuracy, sensitivity, specificity, and Area Under the Curve (AUC), respectively.

An Intelligent Framework for Fault Diagnosis of Centrifugal Pump Leveraging Wavelet Coherence Analysis and Deep Learning.

This paper proposes an intelligent framework for the fault diagnosis of centrifugal pumps (CPs) based on wavelet coherence analysis (WCA) and deep learning (DL). The fault-related impulses in the CP vibration signal are often attenuated due to the background interference noises, thus affecting the sensitivity of the traditional statistical features towards faults. Furthermore, extracting health-sensitive information from the vibration signal needs human expertise and background knowledge. To extract CP health-sensitive features autonomously from the vibration signals, the proposed approach initially selects a healthy baseline signal. The wavelet coherence analysis is then computed between the healthy baseline signal and the signal obtained from a CP under different operating conditions, yielding coherograms. WCA is a signal processing technique that is used to measure the degree of linear correlation between two signals as a function of frequency. The coherograms carry information about the CP vulnerability towards the faults as the color intensity in the coherograms changes according to the change in CP health conditions. To utilize the changes in the coherograms due to the health conditions of the CP, they are provided to a Convolution Neural Network (CNN) and a Convolution Autoencoder (CAE) for the extraction of discriminant CP health-sensitive information autonomously. The CAE extracts global variations from the coherograms, and the CNN extracts local variations related to CP health. This information is combined into a single latent space vector. To identify the health conditions of the CP, the latent space vector is classified using an Artificial Neural Network (ANN). The proposed method identifies faults in the CP with higher accuracy as compared to already existing methods when it is tested on the vibration signals acquired from real-world industrial CPs.

Enhancing drought stress tolerance in Camelina (Camelina sativa L.) through exogenous application of potassium.

The current study was performed under controlled conditions to study the effects of exogenous potassium application on carotenoid contents and drought tolerance in Camelina. Water deficit levels such as 100% FC (control) and 40% FC (drought stress) were imposed after germination of Camelina plants grown to maturity, and different treatments of exogenous K+ were applied at the vegetative stage. We have reported 17 traits of plant growth, physiology, antioxidant enzyme activity, focusing on carotenoids in Camelina to explore their potential yield and yield components. For this purpose, we used multivariate analysis techniques (descriptive statistics, correlation matrix, analysis of variance [ANOVA] and principal components analysis [PCA] to determine the best relation between potassium and studied traits). The results showed a large number of variations in the studied trait under control and water deficit condition. Plant fresh weight (g) was negatively correlated with shoot length and SOD insignificantly correlated with plant fresh weight (g) under water deficit conditions. Potassium loading predicted that foliar application (3 mM K2 SO4 ), foliar application (6 mM KNO3 ), foliar application (12 mM KNO3 ) and foliar application (12 mM K2 SO4 ) are the important doses that contribute the most to enhance the growth, physiological and biochemical activities and carotenoids to improve the Camelina yield under water deficit condition. These doses should be considered in the future to improve the Camelina yield under semi-arid conditions with increased genetic diversity (varietal selection).

Impact on quality of life in obstructive sialadenitis predicting outcomes after sialendoscopy.

PURPOSE: Sialendoscopy is a minimally invasive procedure considered a paradigm shift in the treatment of obstructive sialadenitis. However, it shows an average need for revision procedure in up to 24% of operated cases. This study analyzed whether patient-related variables could predict the need for a revision during postoperative follow-up. METHODS: From 2012 to 2020, this prospective comparative study analyzed demographic data as well as preoperative responses to the "Manukau Salivary Symptoms Score" (MSSS) questionnaire as predictors of the need for a revision procedure due to symptoms recurrence. RESULTS: 188 sialendoscopies (39.4% for stones/60.6% for stenoses) in 112 parotid (59.6%) and 76 submandibular glands (40.4%) were included in this study. Forty patients (21.3%) required a revision procedure. The variable "Impact on quality of life" in the preoperative period of patients with sialoliths showed that the likelihood of a revision procedure increases by 33.6% with each increase in the 10-point Likert scale presented in the MSSS (p = 0.010, OR = 1336, CI = 1.071 to 1.667). This finding was not influenced by the location of the sialolith in the duct (p = 0.415), size (p = 0.058) or number of stones (P = 0.476). Other demographic variables related to the patient showed no association with the need of a revision procedure. CONCLUSION: Further studies should be performed to exclude the influence of other variables on the results; however, special attention should be given to patients who report a greater pre-operative impact on quality of life due to sialolithiasis. LEVEL OF EVIDENCE: II.

A Deep-Learning-Based Health Indicator Constructor Using Kullback-Leibler Divergence for Predicting the Remaining Useful Life of Concrete Structures.

This paper proposes a new technique for the construction of a concrete-beam health indicator based on the Kullback-Leibler divergence (KLD) and deep learning. Health indicator (HI) construction is a vital part of remaining useful lifetime (RUL) approaches for monitoring the health of concrete structures. Through the construction of a HI, the deterioration process can be processed and portrayed so that it can be forwarded to a prediction module for RUL prognosis. The degradation progression and failure can be identified by predicting the RUL based on the situation of the current specimen; as a result, maintenance can be planned to reduce safety risks, reduce financial costs, and prolong the specimen's useful lifetime. The portrayal of deterioration through HI construction from raw acoustic emission (AE) data is performed using a deep neural network (DNN), whose parameters are obtained by pretraining and fine tuning using a stack autoencoder (SAE). Kullback-Leibler divergence, which is calculated between a reference normal-conditioned signal and a current unknown signal, was used to represent the deterioration process of concrete structures, which has not been investigated for the concrete beams so far. The DNN-based constructor then learns to generate HI from raw data with KLD values as the training label. The HI construction result was evaluated with run-to-fail test data of concrete specimens with two measurements: fitness analysis of the construction result and RUL prognosis. The results confirm the reliability of KLD in portraying the deterioration process, showing a large improvement in comparison to other methods. In addition, this method requires no adept knowledge of the nature of the AE or the system fault, which is more favorable than model-based approaches where this level of expertise is compulsory. Furthermore, AE offers in-service monitoring, allowing the RUL prognosis task to be performed without disrupting the specimen's work.

A Centrifugal Pump Fault Diagnosis Framework Based on Supervised Contrastive Learning.

A novel intelligent centrifugal pump (CP) fault diagnosis method is proposed in this paper. The method is based on the contrast in vibration data obtained from a centrifugal pump (CP) under several operating conditions. The vibration signals data obtained from a CP are non-stationary because of the impulses caused by different faults; thus, traditional time domain and frequency domain analyses such as fast Fourier transform and Walsh transform are not the best option to pre-process the non-stationary signals. First, to visualize the fault-related impulses in vibration data, we computed the kurtogram images of time series vibration sequences. To extract the discriminant features related to faults from the kurtogram images, we used a deep learning tool convolutional encoder (CE) with a supervised contrastive loss. The supervised contrastive loss pulls together samples belonging to the same class, while pushing apart samples belonging to a different class. The convolutional encoder was pretrained on the kurtograms with the supervised contrastive loss to infer the contrasting features belonging to different CP data classes. After pretraining with the supervised contrastive loss, the learned representations of the convolutional encoder were kept as obtained, and a linear classifier was trained above the frozen convolutional encoder, which completed the fault identification. The proposed model was validated with data collected from a real industrial testbed, yielding a high classification accuracy of 99.1% and an error of less than 1%. Furthermore, to prove the proposed model robust, it was validated on CP data with 3.0 and 3.5 bar inlet pressure.

Leak Localization on Cylinder Tank Bottom Using Acoustic Emission.

In this study, a scheme for leak localization on a cylinder tank bottom using acoustic emission (AE) is proposed. This approach provides a means of early failure detection, thus reducing financial damage and hazards to the environment and users. The scheme starts with the hit detection process using a constant false alarm rate (CFAR) and a fixed thresholding method for a time of arrival (TOA) and an end-time determination. The detected hits are then investigated to group those originating from the same AE source together by enforcing an event definition and a similarity score. Afterwards, these newly grouped hits are processed by a time difference of arrival (TDOA) to find the locations of the events. Since the locations of the events alone do not pinpoint the leak location, a data density analysis using a Voronoi diagram is employed to find the area with the highest possibility of a leak's existence. The proposed method was validated using the Hsu-Nielsen test on a cylinder tank bottom under a one-failed-sensor scenario, which returned a highly accurate result across multiple test locations.

A Method for Pipeline Leak Detection Based on Acoustic Imaging and Deep Learning.

This paper proposes a reliable technique for pipeline leak detection using acoustic emission signals. The acoustic emission signal of a pipeline contains leak-related information. However, the noise in the signal often obscures the leak-related information, making traditional acoustic emission features, such as count and peaks, less effective. To obtain leak-related features, first, acoustic images were obtained from the time series acoustic emission signals using continuous wavelet transform. The acoustic images (AE images) were the wavelet scalograms that represent the time-frequency scales of the acoustic emission signal in the form of an image. The acoustic images carried enough information about the leak, as the leak-related information had a high-energy representation in the scalogram compared to the noise. To extract leak-related discriminant features from the acoustic images, they were provided as input into the convolutional autoencoder and convolutional neural network. The convolutional autoencoder extracts global features, while the convolutional neural network extracts local features. The local features represent changes in the energy at a finer level, whereas the global features are the overall characteristics of the acoustic signal in the acoustic image. The global and local features were merged into a single feature vector. To identify the pipeline leak state, the feature vector was fed into a shallow artificial neural network. The proposed method was validated by utilizing a data set obtained from the industrial pipeline testbed. The proposed algorithm yielded a high classification accuracy in detecting leaks under different leak sizes and fluid pressures.

A Scheme with Acoustic Emission Hit Removal for the Remaining Useful Life Prediction of Concrete Structures.

In this study, a scheme of remaining useful lifetime (RUL) prognosis from raw acoustic emission (AE) data is presented to predict the concrete structure's failure before its occurrence, thus possibly prolong its service life and minimizing the risk of accidental damage. The deterioration process is portrayed by the health indicator (HI), which is automatically constructed from raw AE data with a deep neural network pretrained and fine-tuned by a stacked autoencoder deep neural network (SAE-DNN). For the deep neural network structure to perform a more accurate construction of health indicator lines, a hit removal process with a one-class support vector machine (OC-SVM), which has not been investigated in previous studies, is proposed to extract only the hits which matter the most to the portrait of deterioration. The new set of hits is then harnessed as the training labels for the deep neural network. After the completion of the health indicator line construction, health indicators are forwarded to a long short-term memory recurrent neural network (LSTM-RNN) for the training and validation of the remaining useful life prediction, as this structure is capable of capturing the long-term dependencies, even with a limited set of data. Our prediction result shows a significant improvement in comparison with a similar scheme but without the hit removal process and other methods, such as the gated recurrent unit recurrent neural network (GRU-RNN) and the simple recurrent neural network.