RESUMEN
OBJECTIVES: To assess the feasibility of producing 3D-printed intracoronal restorations, thin and ultrathin veneers, and to compare their mechanical behavior, accuracy, biological, and stain susceptibility to the currently applied milled restorations. MATERIALS AND METHODS: The databases were comprehensively searched for relevant records up to January 2024 without language restrictions. All studies that assessed 3D-printed partial coverage restorations including inlays, onlays, laminate, and occlusal veneers were retrieved. RESULTS: The web search yielded a total of 1142 records, with 8 additional records added from websites at a later stage. Only 17 records were ultimately included in the review. The included records compared 3D-printed; alumina-based- and zirconia ceramics, lithium disilicate ceramics, polymer infiltrated ceramics, polyetheretherketone (PEEK), resin composites, and acrylic resins to their CNC milled analogs. The pooled data indicated that it is possible to produce ultrathin restorations with a thickness of less than 0.2 mm. 3D-printed laminate veneers and intracoronal restorations exhibited superior trueness, as well as better marginal and internal fit compared to milled restorations (p < 0.05). However, it should be noted that the choice of materials and preparation design may influence these outcomes. In terms of cost, the initial investment and production expenses associated with 3D printing were significantly lower than those of CNC milling technology. Additionally, 3D printing was also shown to be more time-efficient. CONCLUSIONS: Using additive manufacturing technology to produce restorations with a thickness ranging from 0.1 to 0.2 mm is indeed feasible. The high accuracy of these restorations, contributes to their ability to resist caries progression, surpassing the minimum clinical threshold load of failure by a significant margin and reliable adhesion. However, before 3D-printed resin restorations can be widely adopted for clinical applications, further improvements are needed, particularly in terms of reducing their susceptibility to stains. CLINICAL SIGNIFICANCE: 3D-printed intracoronal restorations and veneers are more time and cost-efficient, more accurate, and could provide a considerable alternative to the currently applied CNC milling. Some limitations still accompany the resin materials, but this could be overcome by further development of the materials and printing technology.
Asunto(s)
Coronas con Frente Estético , Impresión Tridimensional , Humanos , Diseño de Prótesis Dental , Restauración Dental Permanente/métodos , Relevancia ClínicaRESUMEN
OBJECTIVES: The objective of this review was to assess clinical trials that have examined the materials, design, and bonding of ceramic cantilevered resin-bonded fixed dental prostheses (RBFDPs) as a potential option for replacing missing anterior teeth. The evaluation primarily focuses on the rate of restoration failure and clinical complications. MATERIALS AND METHODS: A thorough search of databases including PubMed/MEDLINE, Scopus, and the Cochrane Library, was conducted. The most recent search was performed in October 2023. Clinical studies that compared ceramic cantilevered RBFDPs with double retainers or cantilevered RBFDPs using different ceramic materials or bonding systems were included. The outcome measures considered were restoration failure and complication rates. RESULTS: Twelve studies met the eligibility criteria. The pooled data showed a statistically significant decrease in complication events when using cantilever designs compared with double retainer designs (p < 0.05); however, there were no differences found between the two designs in terms of restoration failure. The complication and failure rate of cantilever RBFDPs did not show a statistically significant difference with or without ceramic primer application before luting with phosphate monomer-containing luting resin (p > 0.05). CONCLUSIONS: Ceramic cantilevered RBFDPs have lower complication rates compared with those with double retainers. The use of a ceramic primer prior to luting composite resin for ceramic cantilevered RBFDPs decreases the occurrence of complications and failures, although this effect was not statistically significant. Additional research is required to confirm these findings. Glass ceramic cantilever RBFDPs showed a decrease in success after 6 years, requiring ongoing monitoring, but both zirconia and glass-infiltrated alumina cantilever RBFDPs have demonstrated durability with excellent long-term success and survival rates for up to 10 and 15 years. CLINICAL SIGNIFICANCE: Cantilever ceramic RBFDPs in the anterior region are a less invasive and valuable treatment option, providing good esthetic results.
RESUMEN
STATEMENT OF PROBLEM: The clinical complications, success, and survival rates of indirect restorations delivered with the immediate dentin sealing protocol are unclear. PURPOSE: The purpose of this systematic review and meta-analysis was to find and collect evidence on the clinical complication, success, and survival rates of indirect restorations delivered with immediate dentin sealing. MATERIAL AND METHODS: Electronic databases were searched for clinical studies on immediate dentin sealing up to December 2023, without language or time limitations. The records were included if they were clinical trials evaluating the clinical complication and survival rates of indirect restorations bonded to tooth substrate sealed immediately after preparation with suitable resin bonding. The extracted data were analyzed via Review Manager 5.4 for meta-analysis (α=.05). RESULTS: A total of 11 studies were included in this review. The clinical complication rate was lower for immediately sealed dentin than for protocols without dentin sealing. The survival rate of restorations luted with the immediate dentin sealing protocol was higher (96.4% to 100%) than that of immediate dentin sealing (81.8% to 96.7%), negatively correlated with the observation time. The intensity and incidence of postoperative sensitivity were statistically significantly lower for restorations with immediate dentin sealing than for those without dentin sealing or conventionally cemented (P<.05). CONCLUSIONS: Immediate dentin-sealed indirect restorations had fewer clinical complications and higher success and survival rates than those delivered without dentin sealing. To avoid postoperative sensitivity or reduce its intensity, dentin surfaces should be sealed immediately after preparation. More long-term randomized clinical trials are recommended to confirm these evidence-based conclusions.
RESUMEN
STATEMENT OF PROBLEM: Data on the role of artificial intelligence (AI) in dental implant planning is insufficient. PURPOSE: The purpose of this systematic review with meta-analysis was to analyze and evaluate articles that assess the effectiveness of AI algorithms in dental implant planning, specifically in detecting edentulous areas and evaluating bone dimensions. MATERIAL AND METHODS: A systematic review was conducted across the MEDLINE/PubMed, Web of Science, Cochrane, and Scopus databases. In addition, a manual search was performed. The inclusion criteria consisted of peer-reviewed studies that examined the accuracy of AI-based diagnostic tools on dental radiographs for dental implant planning. The most recent search was conducted in January 2024. The Quality Assessment of Diagnostic Accuracy Studies-2 (QUADAS-2) tool was used to assess the quality of the included articles. RESULTS: Twelve articles met the inclusion criteria for this review and focused on the application of AI in dental implant planning using cone beam computed tomography (CBCT) images. The pooled data indicated an overall accuracy of 96% (95% CI=94% to 98%) for the mandible and 83% (95% CI=82% to 84%) for the maxilla in identifying edentulous areas for implant planning. Eight studies had a low risk of bias, 2 studies had some concern of bias, and 2 studies had a high risk of bias. CONCLUSIONS: AI models have the potential to identify edentulous areas and provide measurements of bone as part of dental implant planning using CBCT images. However, additional well-conducted research is needed to enhance the accuracy, generalizability, and applicability of AI-based approaches.
RESUMEN
STATEMENT OF PROBLEM: Evidence on the long-term clinical assessment and longevity of ceramic veneers bonded to different substrates is limited. PURPOSE: The purpose of this systematic review and meta-analysis was to evaluate the effect of various substrates, including enamel, dentin, or an existing composite resin restoration, on the clinical survival and complication rates of ceramic veneers. MATERIAL AND METHODS: The PubMed, Scopus, and the Cochrane Library electronic databases were searched, and related journals were hand searched without time or language restrictions to identify clinical trials that compared the survival rate and clinical complication rates when bonding ceramic veneers to different tooth substrates. The success rate of the included participants was estimated by the number of veneers that did not require a clinical intervention, and the survival rate by all veneers that did not fail absolutely. The risk difference (RD) with 95% confidence intervals (CIs) for dichotomous outcomes was used to quantify the intervention effect. RESULTS: Of 973 screened articles, 6 clinical studies were included. The survival and success rates varied depending on the bonding substrate. Enamel-bonded veneers had almost perfect rates of survival (99% with a range of 98% to 100%) and success (99% with a range of 98% to 100%). Veneers bonded to composite resin or surfaces with minimal dentin exposure had slightly lower survival rates (94% with a range of 91% to 97% and 95% with a range of 91% to 100%, respectively) and success rates (70% with a range of 60% to 80% and 95% with a range of 90% to 99%). Severe dentin exposure significantly decreased both survival rates (91% with a range of 84% to 98%) and success rates (74% with a range of 64% to 85%). The combined findings suggested that ceramic veneers bonded to enamel had fewer clinical complications (RD: -0.04; 95% CI: -0.09 to 0.02) and lower failure rates (RD: -0.13; 95% CI: -0.32 to 0.07) compared with those bonded to exposed dentin. Additionally, veneers attached to teeth with minimal dentin exposure were significantly less likely to require clinical interventions (RD: -0.16; 95% CI: -0.31 to -0.01) and had a reduced incidence of failure (RD: -0.08; 95% CI: -0.17 to 0.01) compared with those with severe dentin exposure. CONCLUSIONS: Ceramic veneers bonded to enamel showed higher survival and success rates with lower clinical incidences of complications and failure than those bonded to dentin or teeth with existing composite resin restorations.
RESUMEN
STATEMENT OF PROBLEM: With the increasing interest in using robots in dentistry and the widespread dissemination of information on this topic and its applications, a comprehensive review of robot applications in prosthodontics is needed. PURPOSE: The purpose of this scoping review was to assess the current status of prosthodontic robotic applications, their achievements to date, and the barriers hindering their broader adoption and further advancement. MATERIAL AND METHODS: The checklist for Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Reviews (PRISMA-ScR) was used to conduct this review. A comprehensive search methodology was developed to identify relevant studies on the use of robots in prosthodontic procedures in the PubMed, Scopus, Web of Science, and Google Scholar databases. The inclusion criteria were studies that specifically outlined the application of robots in the field of prosthodontics. RESULTS: Eighteen relevant studies were found. Of these, 10 studies focused on assessing the effectiveness of robotic systems through in vitro testing using phantom models for tooth preparation. These studies specifically explored the processes involved in creating complete crowns and veneers. The remaining 8 studies investigated the use of robotics in tooth alignment, with a specific focus on complete dentures. CONCLUSIONS: Robots have the potential to improve precision and accuracy in prosthetic dentistry. However, clinical studies are needed to confirm the widespread use of robots in prosthodontics, as their clinical application is still in its early stages.
RESUMEN
STATEMENT OF PROBLEM: Immediate implant placement in the maxillary premolar area is challenged by anatomic variations imposing risks such as perforation of the buccal bone and the maxillary sinus. Previous studies have addressed the potentially relevant factors individually; a study assessing all relevant variables comprehensively and with a large sample size is lacking. PURPOSE: The purpose of this observational study was to analyze multiple anatomic considerations, including sagittal root position, alveolar bone concavity angle, buccal bone perforation, maxillary sinus floor root proximity, and maxillary sinus perforation in the maxillary premolar area, using cone beam computed tomography (CBCT) to inform, perceive, and simplify the placement of immediate implants. MATERIAL AND METHODS: The analysis involved 333 CBCT images (189 of men, 144 of women). A total of 1332 first and second maxillary premolars were assessed for sagittal root position, alveolar bone concavity angle, buccal bone perforation, maxillary sinus floor root proximity, and maxillary sinus perforation. Chi-squared and kappa tests were used to analyze the distributions and agreement, respectively, while dependent and independent t tests were used to assess sex and tooth-specific differences. The Spearman correlation test was used to explore the potential correlations (α=.05) RESULTS: The majority of sagittal root position distribution was on the buccal side, ranging from 79.3% to 88.3%, while maxillary sinus floor root proximity showed a predominance of the T0 category (roots separated from the maxillary sinus floor), with noticeable sex disparities in the second right premolar (73% in men versus 50.7% in women; P<.001). The "perforation" category of buccal bone perforation was highest in the right first premolar (54.1%), being higher in women across all teeth. The "perforation" category of maxillary sinus perforation was highest in the left second premolar (21.9%). Associations were found between buccal bone perforation and sagittal root position in the second premolars. The Spearman correlation between root proximity and sinus perforation was high, ranging from 0.68 to 0.78. CONCLUSIONS: The alveolar bone concavity angle in first premolars, compared with second premolars, poses a higher risk of buccal bone perforation, especially in women. The buccal position is the most common sagittal root position. The risk of sinus perforation is higher in maxillary second premolars, with proximity to or protrusion into the maxillary sinus floor categories strongly correlating with this complication. These findings highlight the importance of thorough assessment and strategic planning to ensure successful immediate implant placement and minimize potential complications.
RESUMEN
STATEMENT OF PROBLEM: Previous studies have examined the maxillary esthetic zone for immediate implant placement, but these studies had small sample sizes and did not investigate multiple parameters. PURPOSE: The purpose of this cross-sectional study was to use cone beam computed tomography (CBCT) to evaluate the sagittal root position (SRP), alveolar bone concavity, labial bone perforation (LBP), and tooth-ridge angle in the maxillary anterior teeth region. MATERIAL AND METHODS: A total of 352 CBCT images of patients (180 men and 172 women) who visited the dental hospital between 2018 and 2023 were analyzed. The sample included 2112 anterior maxillary teeth. SRP, alveolar bone concavity, tooth ridge angle, and LBP were assessed using virtual implant simulation. The data were analyzed by using chi-squared and kappa tests to analyze distributions and agreement, respectively, dependent and independent t-tests to assess sex and tooth-specific differences, and the Spearman correlation test to explore potential correlations (α<.05). RESULTS: The CBCT images revealed that the majority of SRP were in Class I (85.4%), with smaller percentages in Class II (12.5%) and Class IV (2.3%); Class III was the least common (1%). The canine exhibited the most significant alveolar bone concavity angle average (149.14 ±6.35 degrees), followed by the lateral incisor (142.32 ±8.7 degrees). The canines had the highest occurrence of LBP (63.1%) (P<.01). Women had a higher frequency of labial bone perforation and deeper alveolar bone concavities than men (P<.01). CONCLUSIONS: The findings of this study indicate that careful assessment and planning are necessary for immediate implant placement in the maxillary anterior region. The significant occurrence of LBP highlights the importance of thorough planning and evaluation to avoid surgical mishaps and complications which may necessitate bone grafting and result in added costs and time. Special attention should be given to women and the canine area.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Estética Dental , Carga Inmediata del Implante Dental , Maxilar , Humanos , Tomografía Computarizada de Haz Cónico/métodos , Femenino , Masculino , Maxilar/diagnóstico por imagen , Estudios Transversales , Carga Inmediata del Implante Dental/métodos , Adulto , Persona de Mediana Edad , Proceso Alveolar/diagnóstico por imagen , Anciano , Adulto Joven , Adolescente , Raíz del Diente/diagnóstico por imagenRESUMEN
BACKGROUND AND OBJECTIVE: Ageism represents an important barrier to high-quality healthcare for older adults. The present study sought to translate and validate the Arabic version of the Ageism Scale for Dental Students (ASDS-Arabic). MATERIALS AND METHODS: The 27-item ASDS tool was translated from English into Arabic following recommended cross-sectional forward and backward translation guidelines. The translated version was subjected to the content validity ratio (CVR) and sent to dental students in 21 institutes from 10 different Arab countries. Principal components analysis (PCA) was used to assess the dimensionality of the scale, and Cronbach's alpha was used to determine internal consistency reliability. The discriminant validity of the scale was assessed using the independent t-test. Confirmatory factor analysis (CFA) was also undertaken. RESULTS: Based on CVR, three items were removed. The 24-item Arabic version was completed by 3284 dental students. PCA and CFA retained 17 items in six components, explaining 50.3% of the total variance, with acceptable reliability, validity and discrimination. The first component "Adherence of older patients with dental treatment and instructions," included four items with a Cronbach α of 0.64 and scored 4.3 ± 0.8. The second component "Feasibility of the treatment plan," included three items with a Cronbach α of 0.66 and scored from 2.6 ± 1.2 to 2.9 ± 1.1. The third component "Cost of and responsibility for the dental treatment" included four items with a Cronbach α of 0.47 and scored 4.4 ± 0.8 to 4.5 ± 0.8. The fourth component "Medical history of older patients" included two items with a Cronbach α of 0.70 and scored 4.0 ± 1.0 to 4.1 ± 1.0. The fifth Component "Feeling towards older patients" included two items with a Cronbach α of 0.672 and scored 2.6 ± 1.2 to 2.0 ± 1.4. The sixth Component "Confidence and experience in treating older patients" included two items with a Cronbach α of 0.33 and scored 4.4 ± 1 to 4.6 ± 1. CONCLUSION: This preliminary validation of the ASDS-Ar resulted in a new 17-item scale with six components with acceptable validity, reliability and discrimination.
RESUMEN
OBJECTIVES: To evaluate the peri-implant marginal bone loss (MBL) and prosthodontic complications of maxillary screw-retained implant prosthesis fabricated from digital versus conventional full- arch implant impression. MATERIAL AND METHODS: 28 participants with edentulous maxillary arches were randomly selected and enrolled in two equal groups; Group I conventional impression group (CIG) and Group II Digital impression group (DIG). All patients were rehabilitated with maxillary screwretained implant prosthesis retained by 6 implants. Peri-implant MBL and prosthodontic complications and were registered at 6, 12, and 24 months (m). Data was collected and statistically analyzed. RESULTS: Regarding the effect of time, there was a statistically significant increase in MBL at 6, 12 and 24 m follow-up periods (P<.001). As for the effect of groups, there was no statistically significant difference in MBL between CIG and DIG at 6, 12 and 24 m where P value was 0.083, 0.087 and 0.133 respectively. Prosthetic complications were recorded 19 times in the conventional group and 12 times in the digital group with no significant difference between both groups (P=.303). CONCLUSION: Digital full -arch implant impression is a reliable impression technique and may represent an alternative to conventional impression technique in the fabrication of maxillary screw-retained implant prosthesis.
RESUMEN
PURPOSE: This study aimed to evaluate how different tooth substrates affect the survival rate, shear bond strength, fracture strength, and mode of failure of laminate veneers (LVs). METHODS: This systematic review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. In vitro studies comparing the bonding of laminate veneers to different substrates were included. Electronic databases and manual searches were performed to identify relevant studies. Data on survival rate, shear bond strength, fracture strength, and failure modes were extracted and analyzed using Review Manager software. RESULTS: A total of 10 studies were included in the review, comprising 621 laminate veneers. The findings revealed that laminate veneers bonded to enamel substrate had lower failure rates than those bonded to tooth substrate with severely exposed dentin or existing composite restorations (ECRs). The failure modes observed were debonding, chipping, cracks, or fractures. CONCLUSIONS: Bonding laminate veneers to enamel substrate showed higher survival rates compared to bonding to tooth substrates with severely exposed dentin or ECRs, underscoring the significance of enamel preservation. When dealing with exposed dentine surfaces or ECRs, it is crucial to perform appropriate surface treatment before luting to improve adhesion. This involves immediate dentine sealing, as well as the use of suitable primers and bonding agents.
RESUMEN
ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Immediate implant placement with flap or flapless surgery: a systematic review and meta-analysis. Pitman J, Christiaens V, Callens J, Glibert M, Seyssens L, Blanco J, et al. J Clin Periodontol. 2023;50:755-64. SOURCE OF FUNDING: The present study was funded by the authors and their institutions. CONFLICT OF INTEREST: The authors have no actual or potential conflicts of interest. TYPE OF STUDY/DESIGN: Systematic review and meta-analysis.
Asunto(s)
Carga Inmediata del Implante Dental , Colgajos Quirúrgicos , Humanos , Pérdida de Hueso Alveolar , Relevancia Clínica , Implantación Dental Endoósea/métodos , Implantes Dentales de Diente Único , Carga Inmediata del Implante Dental/métodos , Revisiones Sistemáticas como Asunto , Metaanálisis como AsuntoRESUMEN
ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Digitally versus conventionally fabricated complete dentures: A systematic review on cost-efficiency analysis and patient-reported outcome measures (PROMs). Tew, In Meei, Suet Yeo Soo, and Edmond Ho Nang Pow.The Journal of Prosthetic Dentistry (2023). SOURCE OF FUNDING: No fund was received. TYPE OF STUDY/DESIGN: Systematic review.
Asunto(s)
Análisis Costo-Beneficio , Diseño de Dentadura , Dentadura Completa , Humanos , Diseño Asistido por Computadora/economía , Diseño de Dentadura/economía , Dentadura Completa/economía , Medición de Resultados Informados por el Paciente , Revisiones Sistemáticas como AsuntoRESUMEN
ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Clinical outcomes of digital scans versus conventional impressions for implant-supported fixed complete arch prostheses: A systematic review and meta-analysis. I. A., Spin-Neto, R., Sesma, N., & da Silva, E. V. F. The Journal of Prosthetic Dentistry (2023). SOURCE OF FUNDING: Not reported. TYPE OF STUDY/DESIGN: Systematic review with network meta-analysis of data.
Asunto(s)
Pérdida de Hueso Alveolar , Técnica de Impresión Dental , Prótesis Dental de Soporte Implantado , Humanos , Pérdida de Hueso Alveolar/diagnóstico por imagen , Diseño Asistido por Computadora , Revisiones Sistemáticas como Asunto , Metaanálisis como AsuntoRESUMEN
ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Marginal bone level change of immediately restored implants with simultaneous guided bone regeneration: A systematic review. Lin, X., Yu, X., Wang, F., & Wu, Y. Clinical Implant Dentistry and Related Research 2023. SOURCE OF FUNDING: CAMS Innovation Fund for Medical Sciences (CIFMS), Grant/Award Number: 2019-I2M- 5-037; Clinical Research Plan of SHDC, Grant/Award Number: SHDC2020CR3049B; Huangpu District Industrial Support Fund, Grant/Award Number: XK2020014; Research Discipline Fund, Grant/Award Number: KQYJXK2020. TYPE OF STUDY/DESIGN: Systematic review.
Asunto(s)
Regeneración Ósea , Proyectos de Investigación , Humanos , Revisiones Sistemáticas como AsuntoRESUMEN
STATEMENT OF PROBLEM: The evidence regarding the application of artificial intelligence (AI) in identifying dental implant systems is currently inconclusive. The available studies present varying results and methodologies, making it difficult to draw definitive conclusions. PURPOSE: The purpose of this systematic review with meta-analysis was to comprehensively analyze and evaluate articles that investigate the application of AI in identifying and classifying dental implant systems. MATERIAL AND METHODS: An electronic systematic review was conducted across 3 databases: MEDLINE/PubMed, Cochrane, and Scopus. Additionally, a manual search was performed. The inclusion criteria consisted of peer-reviewed studies investigating the accuracy of AI-based diagnostic tools on dental radiographs for identifying and classifying dental implant systems and comparing the results with those obtained by expert judges using manual techniques-the search strategy encompassed articles published until September 2023. The Quality Assessment of Diagnostic Accuracy Studies-2 (QUADAS-2) tool was used to assess the quality of included articles. RESULTS: Twenty-two eligible articles were included in this review. These articles described the use of AI in detecting dental implants through conventional radiographs. The pooled data showed that dental implant identification had an overall accuracy of 92.56% (range 90.49% to 94.63%). Eleven studies showed a low risk of bias, 6 demonstrated some concern risk, and 5 showed a high risk of bias. CONCLUSIONS: AI models using panoramic and periapical radiographs can accurately identify and categorize dental implant systems. However, additional well-conducted research is recommended to identify the most common implant systems.
RESUMEN
STATEMENT OF PROBLEM: With the increasing interest in the applications of robots in implant dentistry and an acceleration in disseminating information about this field and its applications, a comprehensive review of robots in implant dentistry has become necessary. PURPOSE: The purpose of this scoping review was to identify the present status and development of robotic applications in implant dentistry and provide insights into future implementation and advancement, limitations, and strategies for enhanced clinical adoption and technical advancement. MATERIAL AND METHODS: The Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) checklist was followed. A search strategy was developed to identify relevant studies in the PubMed, Scopus, Web of Science, Embase, and Google Scholar databases. Studies were included if they described using robots in implant dentistry. RESULTS: The literature search identified 34 relevant studies, with the majority published after 2020. Most research used robotic arms to place alveolar implants and test placement accuracy. Twenty-one of the included studies described the in vitro testing of robotic systems using phantom models or specimens, while 10 studies evaluated these systems clinically and 3 tested both in vitro and clinical applications. CONCLUSIONS: Robots are becoming increasingly common in implant dentistry, offering efficiency, time-saving benefits, and improved accuracy. However, more research and development are needed to optimize and streamline robotic software programs for practical application.
RESUMEN
ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Revilla-León M, Gómez-Polo M, Vyas S, Barmak BA, Galluci GO,Att W, Krishnamurthy VR. J. Artificial intelligence applications in implant dentistry: A systematic review. J Prosthet Dent 2021:(21);S0022-3913. SOURCE OF FUNDING: Note reported. TYPE OF STUDY/DESIGN: Systematic review.
Asunto(s)
Inteligencia Artificial , Implantes Dentales , HumanosRESUMEN
ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Artificial intelligence applications in restorative dentistry: A systematic review. Revilla-León, M., Gómez-Polo, M., Vyas, S., Barmak, A. B., Özcan, M., Att, W., & Krishnamurthy, V. R. J Prosthet Dent 2021 SOURCE OF FUNDING: Not reported. TYPE OF STUDY/DESIGN: Systematic review.
Asunto(s)
Inteligencia Artificial , Odontología , HumanosRESUMEN
ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Association between smoking and Schneiderian membrane perforation during maxillary sinus floor augmentation: A systematic review and meta-analysis. Wang, X., Ma, S., Lin, L., & Yao, Q. Clinical Implant Dentistry and Related Research. 2022., 25.1: 166-176. SOURCE OF FUNDING: National Natural Science Foundation of China, Grant/Award Number: 81801021; Hunan Provincial Health Commission, Grant/Award Number: B202308056991. TYPE OF STUDY/DESIGN: Systematic review and meta-analysis.