Engineered Two-Dimensional Transition Metal Dichalcogenides for Energy Conversion and Storage.

Designing efficient and cost-effective materials is pivotal to solving the key scientific and technological challenges at the interface of energy, environment, and sustainability for achieving NetZero. Two-dimensional transition metal dichalcogenides (2D TMDs) represent a unique class of materials that have catered to a myriad of energy conversion and storage (ECS) applications. Their uniqueness arises from their ultra-thin nature, high fractions of atoms residing on surfaces, rich chemical compositions featuring diverse metals and chalcogens, and remarkable tunability across multiple length scales. Specifically, the rich electronic/electrical, optical, and thermal properties of 2D TMDs have been widely exploited for electrochemical energy conversion (e.g., electrocatalytic water splitting), and storage (e.g., anodes in alkali ion batteries and supercapacitors), photocatalysis, photovoltaic devices, and thermoelectric applications. Furthermore, their properties and performances can be greatly boosted by judicious structural and chemical tuning through phase, size, composition, defect, dopant, topological, and heterostructure engineering. The challenge, however, is to design and control such engineering levers, optimally and specifically, to maximize performance outcomes for targeted applications. In this review we discuss, highlight, and provide insights on the significant advancements and ongoing research directions in the design and engineering approaches of 2D TMDs for improving their performance and potential in ECS applications.

Unlocking the Potential: Atomically Thin 2D Fluoritene from Exfoliated Fluorite Ore and Its Electrochemical Activity.

Fluorite mineral holds significant importance because of its optoelectronic properties and wide range of applications. Here, we report the successful exfoliation of bulk fluorite ore (calcium fluoride, CaF2) crystals into atomically thin two-dimensional fluoritene (2D CaF2) using a highly scalable liquid-phase exfoliation method. The microscopic and spectroscopy characterizations show the formation of (111) plane-oriented 2D CaF2 sheets with exfoliation-induced material strain due to bond breaking, leading to the changes in lattice parameter. Its potential role in electrocatalysis is further explored for deeper insight, and a probable mechanism is also discussed. The 2D CaF2 with long-term stability shows overpotential values of 670 and 770 mV vs RHE for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively, at 10 mA cm-2. Computational simulations demonstrate the unique "direct-indirect" band gap switching with odd and even numbers of layers. Current work offers new avenues for exploring the structural and electrochemical properties of 2D CaF2 and its potential applicability.

Deciphering Sodium-Ion Storage: 2D-Sulfide versus Oxide Through Experimental and Computational Analyses.

Transition metal derivatives exhibit high theoretical capacity, making them promising anode materials for sodium-ion batteries. Sulfides, known for their superior electrical conductivity compared to oxides, enhance charge transfer, leading to improved electrochemical performance. Here, a hierarchical WS2 micro-flower is synthesized by thermal sulfurization of WO3. Comprising interconnected thin nanosheets, this structure offers increased surface area, facilitating extensive internal surfaces for electrochemical redox reactions. The WS2 micro-flower demonstrates a specific capacity of ≈334 mAh g-1 at 15 mA g-1, nearly three times higher than its oxide counterpart. Further, it shows very stable performance as a high-temperature (65 °C) anode with ≈180 mAh g-1 reversible capacity at 100 mA g-1 current rate. Post-cycling analysis confirms unchanged morphology, highlighting the structural stability and robustness of WS2. DFT calculations show that the electronic bandgap in both WS2 and WO3 increases when going from the bulk to monolayers. Na adsorption calculations show that Na atoms bind strongly in WO3 with a higher energy diffusion barrier when compared to WS2, corroborating the experimental findings. This study presents a significant insight into electrode material selection for sodium-ion storage applications.

Schwarzites and Triply Periodic Minimal Surfaces: From Pure Topology Mathematics to Macroscale Applications.

Schwarzites are porous (spongy-like) carbon allotropes with negative Gaussian curvatures. They are proposed by Mackay and Terrones inspired by the works of the German mathematician Hermann Schwarz on Triply-Periodic Minimal Surfaces (TPMS). This review presents and discusses the history of schwarzites and their place among curved carbon nanomaterials. The main works on schwarzites are summarized and are available in the literature. Their unique structural, electronic, thermal, and mechanical properties are discussed. Although the synthesis of carbon-based schwarzites remains elusive, recent advances in the synthesis of zeolite-templates nanomaterials have brought them closer to reality. Atomic-based models of schwarzites are translated into macroscale ones that are 3D-printed. These 3D-printed models are exploited in many real-world applications, including water remediation and biomedical ones.

Graphene Terahertz Devices for Sensing and Communication.

Graphene-based terahertz (THz) devices have emerged as promising platforms for a variety of applications, leveraging graphene's unique optoelectronic properties. This review explores recent advancements in utilizing graphene in THz technology, focusing on two main aspects: THz molecular sensing and THz wave modulation. In molecular sensing, the environment-sensitive THz transmission and emission properties of graphene are utilized for enabling molecular adsorption detection and biomolecular sensing. This capability holds significant potential, from the detection of pesticides to DNA at high sensitivity and selectivity. In THz wave modulation, crucial for next-generation wireless communication systems, graphene demonstrates remarkable potential in absorption modulation when gated. Novel device structures, spectroscopic systems, and metasurface architectures have enabled enhanced absorption and wave modulation. Furthermore, techniques such as spatial phase modulation and polarization manipulation have been explored. From sensing to communication, graphene-based THz devices present a wide array of opportunities for future research and development. Finally, advancements in sensing techniques not only enhance biomolecular analysis but also contribute to optimizing graphene's properties for communication by enabling efficient modulation of electromagnetic waves. Conversely, developments in communication strategies inform and enhance sensing capabilities, establishing a mutually beneficial relationship.

Multifunctional Applications Enabled by Fluorination of Hexagonal Boron Nitride.

2D materials exhibit exceptional properties as compared to their macroscopic counterparts, with promising applications in nearly every area of science and technology. To unlock further functionality, the chemical functionalization of 2D structures is a powerful technique that enables tunability and new properties within these materials. Here, the successful effort to chemically functionalize hexagonal boron nitride (hBN), a chemically inert 2D ceramic with weak interlayer forces, using a gas-phase fluorination process is exploited. The fluorine functionalization guides interlayer expansion and increased polar surface charges on the hBN sheets resulting in a number of vastly improved applications. Specifically, the F-hBN exhibits enhanced dispersibility and thermal conductivity at higher temperatures by more than 75% offering exceptional performance as a thermofluid additive. Dispersion of low volumes of F-hBN in lubricating oils also offers marked improvements in lubrication and wear resistance for steel tribological contacts decreasing friction by 31% and wear by 71%. Additionally, incorporating numerous negatively charged fluorine atoms on hBN induces a permanent dipole moment, demonstrating its applicability in microelectronic device applications. The findings suggest that anchoring chemical functionalities to hBN moieties improves a variety of properties for h-BN, making it suitable for numerous other applications such as fillers or reinforcement agents and developing high-performance composite structures.

Quantum enhanced efficiency and spectral performance of paper-based flexible photodetectors functionalized with two dimensional materials.

Flexible photodetectors (PDs) have exotic significance in recent years due to their enchanting potential in future optoelectronics. Moreover, paper-based fabricated PDs with outstanding flexibility unlock new avenues for future wearable electronics. Such PD has captured scientific interest for its efficient photoresponse properties due to the extraordinary assets like significant absorptive efficiency, surface morphology, material composition, affordability, bendability, and biodegradability. Quantum-confined materials harness the unique quantum-enhanced properties and hold immense promise for advancing both fundamental scientific understanding and practical implication. Two-dimensional (2D) materials as quantum materials have been one of the most extensively researched materials owing to their significant light absorption efficiency, increased carrier mobility, and tunable band gaps. In addition, 2D heterostructures can trap charge carriers at their interfaces, leading increase in photocurrent and photoconductivity. This review represents comprehensive discussion on recent developments in such PDs functionalized by 2D materials, highlighting charge transfer mechanism at their interface. This review thoroughly explains the mechanism behind the enhanced performance of quantum materials across a spectrum of figure of merits including external quantum efficiency, detectivity, spectral responsivity, optical gain, response time, and noise equivalent power. The present review studies the intricate mechanisms that reinforce these improvements, shedding light on the intricacies of quantum materials and their significant capabilities. Moreover, a detailed analysis of the technical applicability of paper-based PDs has been discussed with challenges and future trends, providing comprehensive insights into their practical usage in the field of future wearable and portable electronic technologies.

Intrinsic and Strain-Dependent Properties of Suspended WSe2 Crystallites toward Next-Generation Nanoelectronics and Quantum-Enabled Sensors.

Two-dimensional (2D) layered materials exhibit great potential for high-performance electronics, where knowledge of their thermal and phononic properties is critical toward understanding heat dissipation mechanisms, considered to be a major bottleneck for current generation nanoelectronic, optoelectronic, and quantum-scale devices. In this work, noncontact Raman spectroscopy was used to analyze thermal properties of suspended 2D WSe2 membranes to access the intrinsic properties. Here, the influence of electron-phonon interactions within the parent crystalline WSe2 membranes was deciphered through a comparative analysis of extrinsic substrate-supported WSe2, where heat dissipation mechanisms are intimately tied to the underlying substrate. Moreover, the excitonic states in WSe2 were analyzed by using temperature-dependent photoluminescence spectroscopy, where an enhancement in intensity of the localized excitons in suspended WSe2 was evident. Finally, phononic and electronic properties in suspended WSe2 were examined through nanoscale local strain engineering, where a uniaxial force was induced on the membrane using a Au-coated cantilever within an atomic force microscope. Through the fundamental analysis provided here with temperature and strain-dependent phononic and optoelectronic properties in suspended WSe2 nanosheets, the findings will inform the design of next-generation energy-efficient, high-performance devices based on WSe2 and other 2D materials, including for quantum applications.

Three-dimensional printing of wood.

Natural wood has served as a foundational material for buildings, furniture, and architectural structures for millennia, typically shaped through subtractive manufacturing techniques. However, this process often generates substantial wood waste, leading to material inefficiency and increased production costs. A potential opportunity arises if complex wood structures can be created through additive processes. Here, we demonstrate an additive-free, water-based ink made of lignin and cellulose, the primary building blocks of natural wood, that can be used to three-dimensional (3D) print architecturally designed wood structures via direct ink writing. The resulting printed structures, after heat treatment, closely resemble the visual, textural, olfactory, and macro-anisotropic properties, including mechanical properties, of natural wood. Our results pave the way for 3D-printed wooden construction with a sustainable pathway to upcycle/recycle natural wood.

Hierarchically porous and single Zn atom-embedded carbon molecular sieves for H2 separations.

Hierarchically porous materials containing sub-nm ultramicropores with molecular sieving abilities and microcavities with high gas diffusivity may realize energy-efficient membranes for gas separations. However, rationally designing and constructing such pores into large-area membranes enabling efficient H2 separations remains challenging. Here, we report the synthesis and utilization of hybrid carbon molecular sieve membranes with well-controlled nano- and micro-pores and single zinc atoms and clusters well-dispersed inside the nanopores via the carbonization of supramolecular mixed matrix materials containing amorphous and crystalline zeolitic imidazolate frameworks. Carbonization temperature is used to fine-tune pore sizes, achieving ultrahigh selectivity for H2/CO2 (130), H2/CH4 (2900), H2/N2 (880), and H2/C2H6 (7900) with stability against water vapor and physical aging during a continuous 120-h test.

The Rise of Xene Hybrids.

Xenes, mono-elemental atomic sheets, exhibit Dirac/Dirac-like quantum behavior. When interfaced with other 2D materials such as boron nitride, transition metal dichalcogenides, and metal carbides/nitrides/carbonitrides, it enables them with unique physicochemical properties, including structural stability, desirable bandgap, efficient charge carrier injection, flexibility/breaking stress, thermal conductivity, chemical reactivity, catalytic efficiency, molecular adsorption, and wettability. For example, BN acts as an anti-oxidative shield, MoS2 injects electrons upon laser excitation, and MXene provides mechanical flexibility. Beyond precise compositional modulations, stacking sequences, and inter-layer coupling controlled by parameters, achieving scalability and reproducibility in hybridization is crucial for implementing these quantum materials in consumer applications. However, realizing the full potential of these hybrid materials faces challenges such as air gaps, uneven interfaces, and the formation of defects and functional groups. Advanced synthesis techniques, a deep understanding of quantum behaviors, precise control over interfacial interactions, and awareness of cross-correlations among these factors are essential. Xene-based hybrids show immense promise for groundbreaking applications in quantum computing, flexible electronics, energy storage, and catalysis. In this timely perspective, recent discoveries of novel Xenes and their hybrids are highlighted, emphasizing correlations among synthetic parameters, structure, properties, and applications. It is anticipated that these insights will revolutionize diverse industries and technologies.

Imine-Linked 2D Conjugated Porous Organic Polymer Films for Tunable Acid Vapor Sensing.

Two-dimensional (2D) films of conjugated porous organic polymers (C-POPs) can translate the rich in-plane functionalities of conjugated frameworks into diverse optical and electronic applications while addressing the processability issues of their crystalline analogs for adaptable device architectures. However, the lack of facile single-step synthetic routes to obtain large-area high-quality films of 2D-C-POPs has limited their application possibilities so far. Here, we report the synthesis of four mechanically robust imine-linked 2D-C-POP free-standing films using a single-step fast condensation route that is scalable and tunable. The rigid covalently bonded 2D structures of the C-POP films offer high stability for volatile gas sensing in harsh environments while simultaneously enhancing site accessibility for gas molecules due to mesoporosity by structural design. Structurally, all films were composed of exfoliable layers of 2D polymeric nanosheets (NSs) that displayed anisotropy from disordered stacking, evinced by out-of-plane birefringent properties. The tunable in-plane conjugation, different nitrogen centers, and porous structures allow the films to act as ultraresponsive colorimetric sensors for acid sensing via reversible imine bond protonation. All the films could detect hydrogen chloride (HCl) gas down to 0.05 ppm, far exceeding the Occupational Safety and Health Administration's permissible exposure limit of 5 ppm with fast response time and good recyclability. Computational insights elucidated the effect of conjugation and tertiary nitrogen in the structures on the sensitivity and response time of the films. Furthermore, we exploited the exfoliated large 2D NSs and anisotropic optoelectronic properties of the films to adapt them into micro-optical and triboelectric devices to demonstrate their real-time sensing capabilities.

Biotene: Earth-Abundant 2D Material as Sustainable Anode for Li/Na-Ion Battery.

Natural ores are abundant, cost-effective, and environmentally friendly. Ultrathin (2D) layers of a naturally abundant van der Waals mineral, Biotite, have been prepared in bulk via exfoliation. We report here that this 2D Biotene material has shown extraordinary Li-Na-ion battery anode properties with ultralong cycling stability. Biotene shows 302 and 141 mAh g-1 first cycle-specific charge capacity for Li- and Na-ion battery applications with ∼90% initial Coulombic efficiency. The electrode exhibits significantly extended cycling stability with ∼75% capacity retention after 4000 cycles even at higher current densities (500-2000 mA g-1). Further, density functional theory studies show the possible Li intercalation mechanism between the 2D Biotene layers. Our work brings new directions toward designing the next generation of metal-ion battery anodes.

Vapor Growth of All-Inorganic 2D Ruddlesden-Popper Lead- and Tin-Based Perovskites.

The 2D Ruddlesden-Popper (RP) perovskites Cs2PbI2Cl2 (Pb-based, n = 1) and Cs2SnI2Cl2 (Sn-based, n = 1) stand out as unique and rare instances of entirely inorganic constituents within the more expansive category of organic/inorganic 2D perovskites. These materials have recently garnered significant attention for their strong UV-light responsiveness, exceptional thermal stability, and theoretically predicted ultrahigh carrier mobility. In this study, we synthesized Pb and Sn-based n = 1 2D RP perovskite films covering millimeter-scale areas for the first time, utilizing a one-step chemical vapor deposition (CVD) method under atmospheric conditions. These films feature perovskite layers oriented horizontally relative to the substrate. Multilayered Cs3Pb2I3Cl4 (Pb-based, n = 2) and Cs3Sn2I3Cl4 (Sn-based, n = 2) films were also obtained for the first time, and their crystallographic structures were refined by combining X-ray diffraction (XRD) and density functional theory (DFT) calculations. DFT calculations and experimental optical spectroscopy support band-gap energy shifts related to the perovskite layer thickness. We demonstrate bias-free photodetectors using the Sn-based, n = 1 perovskite with reproducible photocurrent and a fast 84 ms response time. The present work not only demonstrates the growth of high-quality all-inorganic multilayered 2D perovskites via the CVD method but also suggests their potential as promising candidates for future optoelectronic applications.