RESUMEN
Pt(II) diynes and polyynes incorporating 5,5'- and 6,6'-disubstituted 2,2'-bipyridines were prepared following conventional Sonogashira and Hagihara dehydrohalogenation reaction protocols. Using Pt(II) dimers and polymers as a rigid-rod backbone, four new heterobimetallic compounds incorporating Re(CO)3Cl as a pendant functionality in the 2,2'-bipyridine core were obtained. The new heterobimetallic Pt-Re compounds were characterized by analytical and spectroscopic techniques. The solid-state structures of a Re(I)-coordinated diterminal alkynyl ligand and a representative model compound were determined by single-crystal X-ray diffraction. Detailed photophysical characterization of the heterobimetallic Pt(II) diynes and polyynes was carried out. We find that the incorporation of the Re(CO)3Cl pendant functionality in the 2,2'-bipyridine-containing main-chain Pt(II) diynes and polyynes has a synergistic effect on the optical properties, red shifting the absorption profile and introducing strong long-wavelength absorptions. The Re(I) moiety also introduces strong emission into the monomeric Pt(II) diyne compounds, whereas this is suppressed in the polyynes. The extent of the synergy depends on the topology of the ligands. Computational modeling was performed to compare the energetic stabilities of the positional isomers and to understand the microscopic nature of the major optical transitions. We find that 5,5'-disubstituted 2,2'-bipyridine systems are better candidates in terms of yield, photophysical properties, and stability than their 6,6'-substituted counterparts. Overall, this work provides an additional synthetic route to control the photophysical properties of metallaynes for a variety of optoelectronic applications.
RESUMEN
Square planar platinum(ii) complexes have been known for 150 years and pincer complexes, supported by a tridentate chelating ligand such as terpyridyl, have been known for more than 70 years. The development of cyclometallated platinum(ii) pincer complexes, in which the tridentate ligand forms one or more platinum-carbon bonds, has been much more recent. Particularly, in terms of their solution and solid-state luminescence these cyclometallated complexes show substantial advantages over their terpyridyl analogues. This tutorial review introduces the reader to the area of platinum(ii) cyclometallated pincer chemistry and shows the advantage of having an alkynyl group in the fourth coordination site on the metal. The basic design principles for the preparation of highly luminescent platinum(ii) cyclometallated pincer complexes are outlined and the strategy to improve the luminescence further by chemical manipulation of the pincer ligand and of the auxiliary ligand in the fourth coordination site are illustrated with recent examples from the literature. Recent applications of these cyclometallated pincer complexes in the area of opto-electronics is described, with emphasis on their use in OLEDs, OFETs and as NLO materials as well as demonstrating their potential use as triplet photosensitizers and as metal ion sensors. The aim of this review is to show the recent advances in this rapidly developing research field and to highlight the future promise of these materials.
RESUMEN
Heteroaryl incorporated acetylide-functionalized pyridinyl ligands (L1-L6) with the general formula Py-C≡C-Ar (Py = pyridine and Ar = thiophene-2-yl, 2,2' -bithiophene]-5-yl, 2,2' :5',2â³ -terthiophene]-5-yl, thieno[2,3- b]thiophen-2-yl, quinoline-5-yl, benzo[c][1,2,5]thiadiazole-5-yl) have been synthesized by Pd(0)/Cu(I)-catalyzed cross-coupling reaction of 4-ethynylpyridine and the respective heteroaryl halide. Ligands L1-L6 were isolated in respectable yields and characterized by microanalysis, IR spectroscopy, 1H NMR spectroscopy, and ESI-MS mass spectrometry. A series of dinuclear Cu(I) complexes 1-10 have been synthesized by reacting L1-L6 with CuI and triphenylphosphine (PPh3) (R1) or with an anchored phosphine derivative, 4-(diphenylphosphino) benzoic acid (R2)/2-(diphenylphosphino)benzenesulfonic acid (R3), in a stoichiometric ratio. The complexes are soluble in common organic solvents and have been characterized by analytical, spectroscopic, and computational methods. Single-crystal X-ray structure analysis confirmed rhomboid dimeric structures for complexes 1, 2, 4, and 5, and a polymeric structure for 6. Complexes 1-6 showed oxidation potential responses close to 0.9 V vs Fc0/+, which were chemically irreversible and are likely to be associated with multiple steps and core oxidation. Preliminary photovoltaic (PV) results of these new materials indicated moderate power conversion efficiency (PCE) in the range of 0.15-1.56% in dye-sensitized solar cells (DSSCs). The highest PCE was achieved with complex 10 bearing the sulfonic acid anchoring functionality.
RESUMEN
Trimethylsilyl-protected dialkynes incorporating azobenzene linker groups, Me3SiC≡CRC≡CSiMe3 (R = azobenzene-3,3'-diyl, azobenzene-4,4'-diyl, 2,5-dioctylazobenzene-4,4'-diyl), and the corresponding terminal dialkynes, HC≡CRC≡CH, have been synthesized and characterized. The CuI-catalyzed dehydrohalogenation reaction between trans-[Ph(Et3P)2PtCl] and the deprotected dialkynes in a 2:1 ratio in iPr2NH/CH2Cl2 gives the platinum(II) diynes trans-[Ph(Et3P)2PtC≡CRC≡CPt(PEt3)2Ph], while the dehydrohalogenation polycondensation reaction between trans-[(nBu3P)2PtCl2] and the dialkynes in a 1:1 molar ratio under similar reaction conditions affords the platinum(II) polyynes, [-Pt(PnBu3)2-C≡CRC≡C-]n. The materials have been characterized spectroscopically, with the diynes also studied using single-crystal X-ray diffraction. The platinum(II) diynes and polyynes are all soluble in common organic solvents. Optical-absorption measurements show that the compounds incorporating the para-alkynylazobenzene spacers have a higher degree of electronic delocalisation than their meta-alkynylazobenzene counterparts. Reversible photoisomerization in solution was observed spectroscopically for the alkynyl-functionalized azobenzene ligands and, to a lesser extent, for the platinum(II) complexes. Complementary quantum-chemical modeling was also used to analyze the optical properties and isomerization energetics.
RESUMEN
A series of trimethylsilyl-protected monoalkynes (Me3SiC≡C-R) and bis-alkynes (Me3 SiC≡C-R-C≡CSiMe3) incorporating carbazole spacer groups (R = carbazole-2-yl, carbazole-3-yl, carbazole-2,7-diyl, N-(2-ethylhexyl)carbazole-2,7-diyl, carbazole-3,6-diyl, N-(2-ethylhexyl)carbazole-3,6-diyl), together with the corresponding terminal monoalkynes (H-C≡C-R) and bis-alkynes (H-C≡C-R-C≡C-H), have been synthesized and characterized. The CuI-catalyzed dehydrohalogenation reaction between trans-[(Ph)(Et3P)2PtCl], trans-[(Et3P)2PtCl2], and trans-[(P(n)Bu3)2PtCl2] and the terminal alkynes in (i)Pr2NH/CH2Cl2 affords a series of Pt(II) mono- and diynes, while the dehydrohalogenation polycondensation reactions with trans-[(P(n)Bu3)2PtCl2] under similar reaction conditions yields four Pt(II) poly-ynes of the form trans-[(P(n)Bu3)2Pt-C≡C-R-C≡C-]n. The acetylide-functionalized carbazole ligands and the mono-, di-, and polynuclear Pt(II) σ-acetylide complexes have been characterized spectroscopically, with a subset analyzed using single-crystal X-ray diffraction. The Pt(II) mono-, di-, and poly-ynes incorporating the carbazole spacers are soluble in common organic solvents, and solution absorption spectra show a consistent red-shift between the 2- and 2,7- as well as 3- and 3,6-carbazole complexes. Computational modeling is used to explain the observed spectral shifts, which are related to the enhanced electronic delocalization in the latter systems. These results also indicate that the inclusion of carbazole-2,7-diyl units into rigid-rod organometallic polymers should enhance electronic transport along the chains.
RESUMEN
A new series of bis(ferrocenylethynyl) complexes, 3-7, and a mono(ferrocenylethynyl) complex, 8, have been synthesized incorporating conjugated heterocyclic spacer groups, with the ethynyl group facilitating an effective long-range intramolecular interaction. The complexes were characterized by NMR, IR, and UV-vis spectroscopy as well as X-ray crystallography. The redox properties of these complexes were investigated using cyclic voltammetry and spectroelectrochemistry. Although there is a large separation of â¼14 Å between the two redox centers, ΔE(1/2) values in this series of complexes ranged from 50 to 110 mV. The appearance of intervalance charge-transfer bands in the UV-vis-near-IR region for the monocationic complexes further confirmed effective intramolecular electronic communication. Computational studies are presented that show the degree of delocalization across the Fc-C≡C-C≡C-Fc (Fc = C5H5FeC5H4) highest occupied molecular orbital.
RESUMEN
Three new tetra-ferrocenylethynylpyridinyl copper complexes, L4(CuI)4 (3), L4(CuBr)2 (4), and L4(CuCl)2 (5) have been prepared from the reaction of ferrocenylethynylpyridine (L)(2) with copper halides CuX (with X = I(-), Br(-), Cl(-)).The ligand 2 and the complexes 3-5 have been fully characterized by spectroscopic methods. The structures of 2-4 have been confirmed by single-crystal X-ray crystallography. 2 forms a dimer in the crystalline-state through C-H··N hydrogen bonds. 4 and 5 are dimers and 3 a tetramer, in all cases linked through Cu-X··Cu bridging interactions. Cyclic voltammetry in dichloroethane showed chemically reversible multiferrocenyl oxidation signals with evidence for product electro-crystallization. The oxidation products were isolated by electrodeposition onto a Pt disc electrode and investigated by scanning electron microscopy which confirmed the spontaneous formation of crystalline oxidation products with distinctive morphologies. Energy dispersive X-ray elemental analysis shows the presence of hexafluorophosphate (counterion) with the P:Fe ratio of 1:1, 0.5:1, and 1:1 for the electrocrystallized products 3, 4, and 5, respectively, suggesting the formulas [3](4+)(PF6(-))4, [4](2+)(PF6(-))2, and [5](4+)(PF6(-))4 for the electro-crystallized products.
RESUMEN
The intrinsic non-radiative decay (internal conversion) from the triplet excited state in phosphorescent dyes can be described by a multi-phonon emission process. Since non-radiative decay of triplet excitons can be a significant process in organic light-emitting diodes, a detailed understanding of this decay mechanism is important if the overall device efficiency is to be controlled. We compare a deuterated Pt(II)-containing phenylene ethynylene with its non-deuterated counterpart in order to investigate which phonon modes control to the non-radiative decay path. We observe that deuteration does not decrease the non-radiative decay rate. A Franck-Condon analysis of the phosphorescence spectra shows that the electronic excitation is coupled strongly to the breathing mode of the phenyl ring and the C≡C carbon stretching modes, while high-energy C-H or C-D stretching modes play an insignificant role. We, therefore, associate the internal conversion process with the carbon-carbon stretching vibrations.
RESUMEN
Three new neutral di-ferrocenyl-ethynylpyridinyl copper complexes, [L2(CuCl)2(PPh3)2] (), [L2(CuBr)2(PPh3)2] (), and [L2(CuI)2(PPh3)2] () were synthesized from the ferrocenyl-ethynylpyridine ligand (L) (), the appropriate copper halide CuX (with X = Cl(-), Br(-), I(-)) and triphenylphosphine. These neutral complexes were fully characterized by spectroscopic methods and by single crystal X-ray crystallography. Cyclic voltammetry in dichloroethane revealed chemically reversible ferrocenyl oxidation signals followed by characteristic "stripping reduction peaks" showing evidence for oxidation-product electro-crystallization. Scanning electron microscopy confirmed spontaneous formation of crystalline oxidation products with three distinct morphologies for X = Cl(-), Br(-), I(-). Energy dispersive X-ray elemental analysis data show Fe : P ratios of 1 : 2.0, 1 : 2.1 and 1 : 2.1 for electro-crystallization products of complexes , , and , respectively, indicating the presence of two [PF6](-) anions in the vicinity of the dioxidized complexes, and suggesting product formulae [](2+)[PF6](-)2, [](2+)[PF6](-)2 and [](2+)[PF6](-)2.
RESUMEN
A series of trimethylsilyl-protected di-alkynes incorporating 3,4-ethylenedioxythiophene (EDOT) linker groups Me(3)Si-C≡C-R-C≡C-SiMe(3) (R = ethylenedioxythiophene-3,4-diyl 1a, 2,2'-bis-3,4-ethylenedioxythiophene-5,5'-diyl 2a, 2,2',5',2''-ter-3,4-ethylenedioxythiophene-5,5''-diyl 3a) and the corresponding terminal di-alkynes, H-C≡C-R-C≡C-H 1b-2b has been synthesized and characterized and the single crystal X-ray structure of 1a has been determined. CuI-catalyzed dehydrohalogenation reaction between trans-[(Ph)(Et(3)P)(2)PtCl] and the terminal di-alkynes 1b-2b in (i)Pr(2)NH/CH(2)Cl(2) (2:1 mole ratio) gives the Pt(II) di-ynes trans-[(Et(3)P)(2)(Ph)Pt-C≡C-R-C≡C-Pt(Ph)(Et(3)P)(2)] 1M-2M while the dehydrohalogenation polycondensation reaction between trans-[((n)Bu(3)P)(2)PtCl(2)] and 1b-2b (1:1 mole ratio) under similar reaction conditions affords the Pt(II) poly-ynes trans-[Pt(P(n)Bu(3))(2)-C≡C-R-C≡C-](n)1P-2P. The di-ynes and poly-ynes have been characterized spectroscopically and, for 1M and 2M, by single-crystal X-ray which confirms the "rigid rod" di-yne backbone. The materials possess excellent thermal stability, are soluble in common organic solvents and readily cast into thin films. Optical absorption spectroscopic measurements reveal that the EDOT spacers create stronger donor-acceptor interactions between the platinum(II) centres and conjugated ligands along the rigid backbone of the organometallic polymers compared to the related non-fused and fused oligothiophene spacers.
RESUMEN
A series of novel platinum-containing carbazole monomers and polymers was synthesized and fully characterized by UV-VIS absorption, luminescence, and photoinduced absorption studies. In these compounds, a carbazole unit is incorporated into the main chain via either a para- or a meta-linkage. We discuss the effects of linkage and polymerization on the energy levels of S1, T1, and Tn. The S1-T1 splitting observed for the meta-linked monomer (0.4 eV) is only half of that in the para-linked monomer (0.8 eV). Upon polymerization, the exchange energy in the para-linked compound reduces, yet still remains larger than in the meta-linked polymer. We attribute the difference in exchange energy to the difference in wave function overlap between electron and hole in these compounds.
RESUMEN
A series of protected and terminal dialkynes with extended pi-conjugation through a condensed aromatic linker unit in the backbone, 1,4-bis(trimethylsilylethynyl)naphthalene, 1,4-bis(ethynyl)naphthalene, 9,10-bis(trimethylsilylethynyl)anthracene, 9,10-bis(ethynyl)anthracene, have been synthesized and characterized spectroscopically. The solid-state structures of and have been confirmed by single crystal X-ray diffraction studies. Reaction of two equivalents of the complex trans-[Ph(Et(3)P)(2)PtCl] with an equivalent of the terminal dialkynes 1,4-bis(ethynyl)benzene and, in (i)Pr(2)NH-CH(2)Cl(2), in the presence of CuI, at room temperature, afforded the platinum(II) di-ynes trans-[Ph(Et(3)P)(2)Pt-C[triple bond, length as m-dash]C-R-C[triple bond, length as m-dash]C-Pt(PEt(3))(2)Ph](R = benzene-1,4-diyl; naphthalene-1,4-diyl and anthracene-9,10-diyl ) while reactions between equimolar quantities of trans-[((n)Bu(3)P)(2)PtCl(2)] and under similar conditions readily afforded the platinum(II) poly-ynes trans-[-((n)Bu(3)P)(2)Pt-C[triple bond]C-R-C[triple bond]C-](n)(R = naphthalene-1,4-diyl and anthracene-9,10-diyl ). The Pt(II) diynes and poly-ynes have been characterized by analytical and spectroscopic methods, and the single crystal X-ray structures of and have been determined. These structures confirm the trans-square planar geometry at the platinum centres and the linear nature of the molecules. The di-ynes and poly-ynes are soluble in organic solvents and readily cast into thin films. Optical spectroscopic measurements reveal that the electron-rich naphthalene and anthracene spacers create strong donor-acceptor interactions between the Pt(II) centres and conjugated ligands along the rigid backbone of the organometallic polymers. Thermogravimetry shows that the di-ynes possess a somewhat higher thermal stability than the corresponding poly-ynes. Both the Pt(II) di-ynes and the poly-ynes exhibit increasing thermal stability along the series of spacers from phenylene through naphthalene to anthracene.