Clinical Performance of Glass Ionomer Cement in Load-Bearing Restorations: A Systematic Review.

Glass ionomer cement (GIC) is a self-adhesive dental restorative material composed of a polyacrylic acid liquid and fluoro-aluminosilicate glass powder. It is commonly used for cementation during dental restoration. This study aimed to systematically review the existing literature regarding the clinical performance of GIC in load-bearing dental restorations. A comprehensive literature search was conducted in EBSCO, PubMed, Embrace, and Cochrane databases. Only randomized controlled trials (RCTs) were included in the search, and a broad search technique was used, where inclusion and exclusion criteria were applied. After a thorough evaluation, 12 RCTs were extensively reviewed, and whether GIC is suitable for load-bearing restorations was determined. Significant variations in staining surface or margin, color match, translucency, esthetic anatomical form, retention, material fracture, marginal adaptation, surface luster, occlusal contour, wear, and approximal anatomical form indicated the unsuitability of GIC. By contrast, significance differences in patient view and periodontal response indicated that GIC is suitable. No significant differences in postoperative sensitivity, recurrence of caries, or tooth integrity were observed. Nevertheless, the results of the review demonstrated that the clinical performance of GIC is comparable to that of traditional restorative materials with regard to the parameters analyzed. GIC is a suitable restorative material for load-bearing restorations regarding surface margin, esthetic anatomical form, material retention and fracture, marginal adaptation, occlusal contour, wear, and approximal anatomical form. It reduces other parameters, such as postoperative sensitivity, recurrence of caries, and tooth integrity.

A Systematic Review of Publications on Perceptions and Management of Chronic Medical Conditions Using Telemedicine Remote Consultations by Primary Healthcare Professionals April 2020 to December 2021 During the COVID-19 Pandemic.

Telemedicine technologies allow distribution of health-related services and information and can include electronic and telecommunication technologies, remote patient and clinician contact, referral and prescribing, patient education, and monitoring. This systematic review aimed to evaluate publications on the perceptions and management of chronic medical conditions using telehealth remote consultations by primary healthcare professionals between April 2020 and December 2021 during the COVID-19 pandemic. Electronic databases, including Cinhal, PubMed, Science Direct, and ProQuest were searched to extract qualitative studies relevant to the topic. Inclusion criteria were developed based on the Population, Exposure, and Outcomes scoping framework. The target population was healthcare professionals working in primary care settings. Included studies encompassed various types of telemedicine, such as synchronous telemedicine, video conferencing, telephone conversations, and smart devices. Eight studies were included. Synchronous telemedicine was highly effective in ensuring the continuity of care and treatment, providing patients with convenience, improved access to treatment, and earlier disease management. Video conferencing and telephone consultations were the most common methods used. Challenges included concerns about patient privacy, technology literacy, and acceptance. Telemedicine was commended for its ability to provide access to immediate expert medical advice and eliminate the need for long-distance travel, contributing to increased patient compliance. Synchronous telemedicine is a promising solution for managing chronic conditions during and after the COVID-19 pandemic, offering benefits to patients and healthcare professionals. To maximize its potential, concerns regarding patient privacy, confidentiality, and technology literacy need to be addressed. Proper legislation and regulations are required for long-term success of telemedicine, making it a valuable component of healthcare systems.

Evaluating the Efficacy of Platelet-Rich Fibrin Matrix versus Subepithelial Connective Tissue Grafts in Dental Root Coverage: A Comparative Study Using Modified Ruben's Technique.

BACKGROUND Dental root coverage, crucial in managing gingival recessions, traditionally utilizes subepithelial connective tissue grafts. However, this approach has limitations such as donor site morbidity and graft availability. Recent studies have introduced platelet-rich fibrin (PRF) as an alternative, leveraging its regenerative potential and growth factors. Despite the promise, comparative assessments between PRF and conventional grafts remain limited. This research probes whether PRF, when used beneath a modified Ruben's mixed flap, could provide comparable or superior dental root coverage than a subepithelial connective tissue graft. MATERIAL AND METHODS We enrolled 30 patients exhibiting Miller's class I and II recession in this comparative case series. Patients were randomly assigned to receive either a connective tissue graft (15 patients) or a PRF matrix (15 patients), both covered by a modified Ruben's mixed flap. RESULTS Clinical parameters, including full mouth plaque scores, bleeding scores, probing sulcus depth, clinical attachment level, gingival position assessment, width, and thickness of attached gingiva, were assessed in both the control and test groups at baseline, 6 months, and 12 months post-surgery. Significant differences were observed at all intervals.At the 12-month mark, the control group (connective tissue graft) achieved 91% complete root coverage, while the test group (PRF matrix) achieved 86%. However, this difference was not statistically significant. CONCLUSIONS The study outcomes suggest comparable gains in root coverage and attached gingiva between the connective tissue graft and PRF matrix groups. Thus, the results support our hypothesis that a subepithelial PRF matrix can serve as a viable alternative to a subepithelial connective tissue graft for treating dental root coverage.

A Comparative Analysis of Marginal Adaptation Values between Lithium Disilicate Glass Ceramics and Zirconia-Reinforced Lithium Silicate Endocrowns: A Systematic Review of In Vitro Studies.

This systematic review aimed to identify and analyze in vitro studies on the marginal adaptation values of computer-aided-design/computer-aided-manufacturing (CAD/CAM) and heat-pressed lithium disilicate glass ceramics and zirconia-reinforced lithium silicates and endocrown restorations. A full literature search was conducted in Web of Science, PubMed/Medline, EMBASE, Scopus, Cochrane Library, Google Scholar, and ProQuest electronic databases. The following keywords: endocrown [(marginal adaption) or (marginal fit) or internal fitting)], endocrown [(molar(s)) or (premolar(s) or (posterior teeth) or (maxillary arch) or (mandibular arch)] and ceramic materials as [(lithium disilicate glass ceramic CAD/CAM) or (zirconia) or (heat-press)] were used. Articles were manually searched utilizing their reference lists. Study selection was restricted or limited to the time of publication but not to the type of tested teeth or ceramic material, endocrown design, system of endocrown construction, abutment scanning, and system of the marginal adaption measurement. A total of 17 in vitro studies published between 2016 and 2023 were included in this systemic review. Less than half of the studies were published during 2023. Most studies used lithium disilicate glass ceramic and zirconia-reinforced lithium silicate all-ceramic materials by CAD/CAM or heat-press systems. Marginal adaptation, or marginal gap, was almost equal in the 2 materials, while it was slightly or marginally higher in the heat-press than in the CAD/CAM system. All-ceramic lithium disilicate glass ceramic and/or zirconia endocrowns fabricated for posterior teeth in both arches using CAD/CAM or heat-press had recorded marginal adaptation values within an acceptable range.

Impact Strength of Various Types of Acrylic Resin: An In Vitro Study.

AIM: The aim of this study is to evaluate and compare the impact strength of conventional acrylic resin, high-impact acrylic resin, high-impact acrylic resin reinforced with silver nanoparticles, and high-impact acrylic resin reinforced with a zirconium oxide powder. MATERIALS AND METHODS: A total of 60 samples were prepared of dimensions 60 mm length × 7 mm width × 4 mm thickness to test impact strength. Machined stainless steel dies of the same dimension were used to form molds for the fabrication of these samples. Of 60 samples, 15 samples were prepared each from conventional acrylic resin (Group A1), high-impact acrylic resin (Group A2), acrylic resin reinforced with silver nanoparticles (Group A3), and acrylic resin reinforced with zirconium oxide powder (Group A4). Izod-Charpy pendulum impact testing machine was used. RESULTS: The impact strength of group A1 was in the range of 2.83-3.30 kJ/m2 (M = 3.12 kJ/m2, SD = 0.16), group A2 was in range of 5.10-5.78 kJ/m2 (M = 5.51 kJ/m2, SD = 0.18), group A3 was in range 3.18-3.56 kJ/m2 (M = 3.37 kJ/m2, SD = 0.11), and group A4 was in range 7.18-7.78 kJ/m2 (M = 7.5 kJ/m2, SD = 0.18). Statistical analysis using one-way ANOVA and t-test revealed significant differences (p < 0.001). CONCLUSION: High-impact acrylic resin reinforced with zirconium oxide powder has the highest impact strength. CLINICAL SIGNIFICANCE: This research sheds light on the usefulness of novel filler materials in clinical prosthodontics.

Efficacy of GLUMA for the Treatment of Dentin Hypersensitivity Compared to Lasers: A Systematic Review.

OBJECTIVE: Dentin hypersensitivity (DH) is characterized by a short, sharp pain in response to a thermal or tactile stimulus. The application of desensitizing agents such as GLUMA and laser is a non-invasive and safe approach to decrease sensitivity. The evidence for the efficacy of GLUMA desensitizer compared to laser desensitization in patients with DH was evaluated for 6 months. DESIGN: In March 2022, an electronic search of PubMed, Scopus, and Web of Science databases was conducted. Articles published in English that compared GLUMA and laser in the treatment of DH with a follow-up of 6 months or more were included. Randomized, non-randomized controlled trials, and clinical trials were included. Risk of bias assessment tools developed by the Cochrane collaboration ROB 2 and ROBINS-I were used to assess the quality of studies. The GRADE assessment method was used to assess the certainty of evidence. RESULTS: About 36 studies were identified in the search results. After applying the predefined eligibility criteria, eight studies with 205 participants and 894 sites were included in this review. Of the eight studies, four were judged to be at high risk of bias, three had some concerns, and one had a serious risk of bias. The certainty of the evidence was graded as low. CONCLUSION: Based on limited evidence, GLUMA and laser appear to be equally effective in providing relief from DH. GLUMA showed an immediate effect and provided pain relief. Over the course of a week, laser showed long-term stable results. GLUMA is effective in providing immediate relief.

Evaluation of dental pulp stem cells response to flowable nano-hybrid dental composites: A comparative analysis.

BACKGROUND: Flowable resin composites (FRC) are tooth-colored restorative materials that contain a lower filler particle content, and lower viscosity than their bulk counterparts, making them useful for specific clinical applications. Yet, their chemical makeup may impact the cellular population of the tooth pulp. This in-vitro study assessed the cytocompatibility and odontogenic differentiation capacity of dental pulp stem cells (DPSCs) in response to two recent FRC material extracts. METHODS: Extracts of the FRC Aura easyflow (AEF) and Polofil NHT Flow (PNF) were applied to DPSCs isolated from extracted human teeth. Cell viability of DPSCs was assessed using MTT assay on days 1, 3 and 7. Cell migration was assessed using the wound healing assay. DPSCs' capacity for osteo/odontogenic differentiation was assessed by measuring the degree of mineralization by Alizarin Red S staining, alkaline phosphatase enzyme (ALP) activity, and monitoring the expression of osteoprotegerin (OPG), RUNX Family Transcription Factor 2 (RUNX2), and the odontogenic marker dentin sialophosphoprotein (DSPP) by RT-PCR. Monomer release from the FRC was also assessed by High-performance liquid chromatography analysis (HPLC). RESULTS: DPSCs exposed to PNF extracts showed significantly higher cell viability, faster wound closure, and superior odontogenic differentiation. This was apparent through Alizarin Red staining of calcified nodules, elevated alkaline phosphatase activity, and increased expression of osteo/odontogenic markers. Moreover, HPLC analysis revealed a higher release of TEDGMA, UDMA, and BISGMA from AEF. CONCLUSIONS: PNF showed better cytocompatibility and enhancement of odontogenic differentiation than AEF.

Barriers in Rubber Dam Isolation Behaviour of Dental Students During Adhesive Restorative Treatments: A Cross-Sectional Study.

PURPOSE:  There are unfavorable opinions connected with rubber dam isolation amongst dental students during adhesive restorative treatments. The aim of this study was to investigate the various barriers to practicing rubber dam isolation during dental procedures and provide necessary insight towards implementation of rubber dam among undergraduate dental students in Jazan. MATERIALS AND METHODS:  A pre-validated questionnaire in English entitled Rubber Dam Isolation Survey (E-RDIS) based on the Capability Opportunity Motivation-Behaviour (COM-B) model of behavioral change wheel was responded by 226 university dental students. RESULTS:  The satisfaction of training was highest among sixth year students (Mean=3.57, p<0.001). Fourth year dental students scored higher in the capability (Mean=3.18) and were more highly motivated to use rubber dams (Mean=4.21). Third year students were more likely to use rubber dams in anterior teeth (Mean=3.52) whereas fourth year students use rubber dam in posterior teeth (Mean=3.74). Lack of motivation was found to be the significant barrier influencing rubber dam usage (odds ratio (OR)=12.1; 3.74, p<0.05). CONCLUSION:  The satisfaction with training differed among the students of different years. The rubber dam technique might be used more frequently if it were made clear to students that mastering it would be necessary for them to receive good grades.

Comparative Evaluation of New Needleless Local Anesthetic System (INJEX) and Conventional Syringe Needle Technique during Pulpotomy Treatment: A Randomized Clinical Trial.

BACKGROUND: The dreaded sensation of pain in the dental chair has a significant impact on children's behavior. This study aimed to compare and contrast the perception of pain and patient behavior between the use of INJEX and the conventional syringe needle technique during pulpotomy among children. METHODS: A randomized clinical trial was designed and conducted among pediatric dentistry patients aged 6-12 years old. Fifty-eight children were divided into two groups, conventional syringe needle and INJEX, using simple randomization method applying the sequentially numbered, opaque, sealed envelope method of allocation concealment. Anesthesia was administered to the groups as local infiltration by a single operator following routine behavior guidance techniques. After 3 min, pulpotomy was performed using the standard protocol. The Face, Legs, Activity, Cry, Consolability (FLACC) scale and Wong-Baker FACES Pain Rating Scale (WBS) were used to assess the intensity of pain, while the Frankl behavior rating scale (FBRS) was used to assess the children's behavior. RESULTS: During anesthesia, most of the participants in the INJEX group (median = 3) had higher FBRS scores compared with the conventional syringe needle group (median = 2), and the difference was very highly significant (p-value < 0.001). Analyzing the FLACC scores during local anesthesia administration revealed a high statistical significance (p-value < 0.01) across the two groups. A very high statistically significant difference (p-values < 0.001) with higher WBS scores for pain intensity was seen in the group using conventional syringe needles. CONCLUSIONS: INJEX administration significantly reduced the intensity of pain experienced by the children and helped maintain a positive attitude among them during pulpotomy. It provided a positive and comfortable experience for both the child and the practitioner. Therefore, it can serve as an excellent alternative to conventional needle anesthesia.

Fracture Load of Mesio-Occluso-Distal Composite Restorations Performed with Different Reinforcement Techniques: An In Vitro Study.

BACKGROUND: Mesio-occluso-distal (MOD) cavity preparations are often fragile due to the amount of tooth and carious structure removed. MOD cavities can often fracture if left unsupported. AIM: The study investigated the maximum fracture load of mesi-occluso-distal cavities restored using direct composite resin restorations with various reinforcement techniques. METHOD: Seventy-two freshly extracted, intact human posterior teeth were disinfected, checked, and prepared according to predetermined standards for mesio-occluso-distal cavity design (MOD). The teeth were assigned randomly into six groups. The first group was the control group restored conventionally with a nanohybrid composite resin (Group I). The other five groups were restored with a nanohybrid composite resin reinforced with different techniques: the ACTIVA BioACTIVE-Restorative and -Liner as a dentin substitute and layered with a nanohybrid composite (Group II); the everX Posterior composite resin layered with a nanohybrid composite (Group III); polyethylene fibers called "Ribbond" placed on both axial walls and the floor of the cavity, and layered with a nanohybrid composite (Group IV); polyethylene fibers placed on both axial walls and the floor of the cavity, and layered with the ACTIVA BioACTIVE-Restorative and -Liner as a dentin substitute and nanohybrid composite (Group V); and polyethylene fibers placed on both axial walls and the floor of the cavity and layered with the everX posterior composite resin and nanohybrid composite (Group VI). All teeth were subjected to thermocycling to simulate the oral environment. The maximum load was measured using a universal testing machine. RESULTS: The highest maximum load was exhibited by Group III with the everX posterior composite resin, followed by Group IV, Group VI, Group I, Group II, and Group V. A statistically significant difference was demonstrated between groups (p = 0.0023). When adjusting for multiple comparisons, there were statistical differences specific to comparisons between Group III versus I, Group III versus II, Group IV versus II, and Group V versus III. CONCLUSIONS: Within the limitations of the current study, it can be concluded that a higher maximum load resistance can be achieved (statistically significant) when reinforcing nanohybrid composite resin MOD restorations with everX Posterior.

Knowledge, Awareness, and Perception of COVID-19 and Artificial Intelligence: A Cross-Sectional Study Among the Population in Saudi Arabia.

BACKGROUND: Artificial intelligence (AI) has made significant contributions to the development of medicines and vaccines. In addition, AI can analyze large amounts of COVID-19 test data, including the number of positive cases, to forecast the trajectory of the pandemic. AIM: This study aimed to assess the knowledge, perception, and awareness of the general population in Saudi Arabia regarding AI and its application in combating COVID-19. METHODS: A cross-sectional research design was employed, and online surveys were distributed via email and social media platforms. Purposeful sampling was used to select participants who met the inclusion criteria. The reliability and validity of the survey instrument were also assessed. RESULTS: The majority of respondents (34.6%) fell within the age range of 30 to 39 years. The sample predominantly consisted of female participants. Approximately 59% of respondents reported using at least one AI tool or application on a daily basis. Furthermore, the majority of respondents agreed that digital medical services, mentioned in a previous question, could be beneficial in reducing unnecessary interactions between patients and healthcare providers. CONCLUSION: The COVID-19 pandemic has demonstrated the transformative potential of AI in pandemic response. AI has played a crucial role in various aspects of combating COVID-19, including patient diagnosis, treatment development, and vaccine creation. However, challenges and limitations exist in terms of data accessibility, bias, and privacy when utilizing AI. These issues need to be addressed to ensure the ethical and responsible use of AI in the fight against COVID-19 and future pandemics.

Nanohydroxyapatite in dentistry: A comprehensive review.

Enamel, being the hardest and the highest mineralized tissue of the human body, contains nearly 96% inorganic components and 4% organic compounds and water. Dentin contains 65% inorganic components and 35% organic and water content. The translucency and white appearance of enamel are attributed to Hydroxyapatite (HA), which constitutes the major part of the inorganic component of dental hard tissue. With the advent of nanotechnology, the application of Nanohydroxyapatite (nHA) has piqued interest in dentistry due to its excellent mechanical, physical, and chemical properties. Compared to HA, nHA is found to have superior properties such as increased solubility, high surface energy and better biocompatibility. This is due to the morphological and structural similarity of nanosized hydroxyapatite particles to tooth hydroxyapatite crystals. These nanoparticles have been incorporated into various dental formulations for different applications to ensure comprehensive oral healthcare. To prevent dental caries, several nHA based dentifrices, mouth rinsing solutions and remineralizing pastes have been developed. nHA-based materials, such as nanocomposites, nano impression materials, and nanoceramics, have proven to be very effective in restoring tooth deformities (decay, fracture, and tooth loss). The nHA coating on the surface of the dental implant helps it bind to the bone by forming a biomimetic coating. A recent innovative strategy involves using nHA to reduce dentinal hypersensitivity and to reconstruct periodontal bone defects. The purpose of the present review is to discuss the different applications of nHA in dentistry, especially in preventive and restorative dentistry, dental implantology, bleaching and dentine hypersensitivity management.

Evaluation of Fracture Strength of Fiber-Reinforced Direct Composite Resin Restorations: An In Vitro Study.

This in vitro study aimed to compare the fracture strength of direct non-reinforced class II composite resin restorations and polyethylene fiber-reinforced restorations, and also to investigate the influence of the locations of polyethylene fibers within the cavity on the fracture strength. Sixty freshly extracted human teeth were disinfected and prepared (class II cavity design). The teeth were assigned randomly into four groups (n = 13). Group I (control) was restored with nano-hybrid composite resin. The other three experimental groups were restored with the same composite resin material reinforced by polyethylene fibers (Ribbond) at different locations. Fibers were placed either on the axial wall (Group II), on the gingival floor (Group III), or on the axial wall and pulpal/gingival floor (Group IV) of the proximal cavity. All the teeth were subjected to thermocycling to simulate the oral environment. The fracture strength was measured using a universal testing machine. Group IV had the highest mean fracture strength at maximum load (148.74 MPa), followed by Group II (140.73 MPa), Group III (136.34 MPa), and Group I (130.08 MPa), with a statistically significant difference from the control group (p = 0.008) but not between groups II and III.

Zinc Oxide Nanoparticles: A Review on Its Applications in Dentistry.

Nanotechnology in modern material science is a research hot spot due to its ability to provide novel applications in the field of dentistry. Zinc Oxide Nanoparticles (ZnO NPs) are metal oxide nanoparticles that open new opportunities for biomedical applications that range from diagnosis to treatment. The domains of these nanoparticles are wide and diverse and include the effects brought about due to the anti-microbial, regenerative, and mechanical properties. The applications include enhancing the anti-bacterial properties of existing restorative materials, as an anti-sensitivity agent in toothpastes, as an anti-microbial and anti-fungal agent against pathogenic oral microflora, as a dental implant coating, to improve the anti-fungal effect of denture bases in rehabilitative dentistry, remineralizing cervical dentinal lesions, increasing the stability of local drug delivery agents and other applications.

Evaluation of cytotoxic effects of fungal origin nanosilver particles on oral cancer cell lines: An in vitro study.

Background: Oral cancer is often associated with poor prognosis and it is found that conventional treatment options cause severe side effects, adjacent tissue disfigurement, and loss of function. Recently, silver nanoparticles (AgNPs) paved their path for cancer treatment. Aim: This study aimed to investigate cytotoxic effects of fungal procured AgNPs on oral squamous cell carcinoma (SCC-9) cell line using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Methodology: The silver nanoparticles were biosynthesized using the fungi Fusarium semitectum. Cell lines were cultured in a 1:1 ratio of Dulbecco's Modified Eagle's medium and Ham's F12 medium and subcultured in a T-75 cm2 flask. Cell count was adjusted to 1 × 105 cells/ml; 50,000 cells/well were seeded into a 96 well plate and incubated at 37°C, for 24 h in 5% CO2 humidified conditions. AgNPs (1.75-50 µl/ml) were added to the plates and further incubated at 37°C for another 24 h. Medium containing cells without AgNPs were used as a control group. Later, 20 µl of MTT was added to each well and incubated for 6 h at above-mentioned conditions. About 0.1 mL of Dulbecco's Modified Eagle's Medium solution was added to each well to solubilize formazan. The absorbance was measured using a Tecan reader at 540 nm. The experiment was repeated thrice independently. The percentage (%) inhibition of growth and the AgNP's concentration that prevents the cell growth by 50% (IC50) were determined. Results: Significant dose-dependent inhibition of the growth of SCC-9 cell lines was seen and IC50 was found at 12 µl/ml concentration of AgNPs. Conclusion: Biosynthesized AgNPs of fungal origin exhibit effective anticancer properties against the SCC-9 cell line.

Dental Caries and Oral Health Status of Psychoactive Substance Abusers.

Substance-abuse disorders are universally associated with comorbid illness. Tobacco is a widely abused substance across the globe and presents a critical public health problem. The precise correlation between tobacco use and dental caries remains unclear. Thus, the present study aimed to evaluate the correlation between tobacco use and dental caries. METHODOLOGY: Based on selection criteria, a total of 270 (age 20-50 years) participants were included in the study, and were categorized as group A (n = 135), consisting of tobacco users, and group B (n = 135), comprising healthy controls (non-users). The Decayed, Missing, and Filled index (DMFT) was used to measure caries status. The Simplified Oral Hygiene index was used to evaluate oral health. RESULTS: The tobacco group reported the use of cigarettes; smokeless tobacco in indigenous forms, such as gutka (areca nut, tobacco, and slaked lime), betel nut chewing; and a combination. Individuals with tobacco habits had a higher prevalence of dental caries (Mean DMFT 4.73 ± 4.32) compared to the non-habit group (Mean DMFT 3.17 ± 3.11 (p = 0.001). The Oral Hygiene index was significantly higher (indicating bad/poor oral hygiene) in tobacco abusers than those of non-users (p = 0.0001). Duration and frequency of tobacco use were correlated with the levels of moderate and severe caries (p = 0.001). CONCLUSION: Psychoactive substance abuse, such as smoking/smokeless tobacco consumption, is associated with higher prevalence of dental caries.

Evaluating the Effect of Tideglusib-Loaded Bioactive Glass Nanoparticles as a Potential Dentine Regenerative Material.

Dental pulp treatment is the least intrusive procedure currently available for preserving the vitality of the pulp. Several studies are underway to improve the bioactivity of pulp capping materials. Tideglusib isa potent anti-inflammatory, antioxidant, and a regenerative drug developed against Alzheimer's disease and has been shown to be effective in the treatment of dental cavities. However, its bioactive properties encapsulated within the nanoparticles as a component of pulp capping material are largely unknown. In this study, tideglusib-loaded bioactive glass nanoparticles were synthesized (tideglusib-BgNPs) and mixed at various concentrations into the calcium silicate cement to testits physiomechanical and bioactivitiescompared with biodentine (control). The calcium silicate cement with 10wgt% tideglusib-BgNPs showed comparable physiomechanical properties to that of biodentine. Additionally, the assessment of cytotoxicity and bioactivity (cell proliferation, wound healing, and cell migration assays) showed increased bioactivity in terms of better wound healing, increased proliferation, and better migration of human dental pulp stem cells than biodentine. These findings suggest new opportunities to use tideglusib-BgNPs in pulp therapy.

Knowledge of COVID-19 Infection Guidelines among the Dental Health Care Professionals of Jazan Region, Saudi Arabia.

BACKGROUND: This study aimed to assess the knowledge about guidelines related to COVID-19 infection control procedures among dental health care professionals (DHCPs) in the Jazan region. METHODS: A cross-sectional study involving DHCPs (dental students, interns, and dentists) of the Jazan region between January and March 2021. A questionnaire with 35 items was developed and circulated online among the DHCPs. The dimensionality of the questionnaire was assessed using exploratory factor analysis (EFA). The level of awareness (LOA) was compared across the genders, level of professional experience, and exposure to guidelines. Participants were considered to have high LOA when they responded to 26 or more items correctly. RESULTS: A total of 363 DHCPs participated in the survey. The questionnaire was found to be valid and reliable. EFA revealed a distinct three-factor structure. Moreover, 61.2% of the respondents had high LOA related to COVID-19 infection prevention. Among those who had high LOA, dentists (65.5%) were relatively more than the students (62.5%) and interns (46.2%). Among the six guideline statements related explicitly to operative dentistry, more than 50% of the respondents were aware of 3 guideline statements, while less than 50% of the respondents were aware of the remaining statements. CONCLUSIONS: Most DHCP had a high LOA for general COVID-19 infection prevention and control guidelines. Dentists, males, and those who read the guidelines had higher LOA than their counterparts.

The Anticariogenic Efficacy of Nano Silver Fluoride.

Dental caries is a common chronic disease, and anyone can be at threat of it throughout their lifespan. In school-aged children, dental caries is the most frequent disease related with oral health. Contemporary dental caries management focuses on non-restorative, non-invasive, and micro-invasive therapeutic techniques that effectively eliminate the caries progression at the lesion level and decrease the loss of healthy tooth structure. One of these strategies is to use caries apprehending agents with antibacterial and remineralizing characteristics. Due to recent regulatory approval in the United States, the use of silver diamine fluoride (SDF) for the therapy of dental caries has received substantial interest. SDF has successfully prevented and reversed both primary tooth caries and permanent teeth root caries. Even though SDF is an effective anti-caries agent, but it is associated with certain drawbacks like gum irritation, metallic taste, and irreversible dark stains on applying on cavities. As an alternative agent Nano Silver Fluoride (NSF) is preferable because it performs like SDF without tooth staining. It has comparable preventive and antibacterial activities as SDF. Further, it is ergonomic, economic and safe in children and adults. The current article aims to highlight the superior properties of NSF as a better anti-caries agent outstripping the limitations of discoloration of SDF.

Marginal and Internal Gap of Metal Copings Fabricated Using Three Types of Resin Patterns with Subtractive and Additive Technology: An In Vitro Comparison.

This study analyzes the evidence of the marginal discrepancy and internal adaptation of copings fabricated using three types of resin patterns with subtractive (milling) and additive technology (3D printing), as it is not widely reported. Working casts (n = 15) were scanned and patterns were completed using computer-aided designing (CAD). Resin patterns were fabricated using the designed data and divided into three groups according to the method of fabrication of patterns: subtractive technology-CAD milled polymethyl methacrylate resin (Group-PMMA), additive technology [digital light processing (DLP) technique]-acrylonitrile-butadiene-styrene (ABS) patterns (Group-ABS), and polylactic acid (PLA) patterns (Group-PLA). Resin patterns were casted with Cobalt-Chromium (Co-Cr) alloy (lost wax technique). Internal and marginal gaps of the metal copings were analyzed with the replica technique under optical microscope. The Kruskal-Wallis test was used to compare values among the groups, and post hoc multiple tests confirmed the specific differences within the groups. The median marginal gap was least for CAD milled resin patterns, followed by PLA printed resin patterns and ABS printed resin patterns. There were significant differences between Group-PMMA and Group-PLA and Group-ABS (p = 0.0001). There was no significant difference between Group-PLA and Group-ABS (p = 0.899). The median internal gap was least for metal copings fabricated from Group-PLA, followed by Group-ABS and Group-PMMA. The differences were not statistically significant (p = 0.638) for the internal gap. Full metal Co-Cr copings fabricated from the milled PMMA group had a better marginal fit, followed by the PLA and ABS printed groups. Copings fabricated with the PLA printed group had the best internal fit, though the values were statistically insignificant between the groups.