RESUMEN
Supported nanomaterials are becoming increasingly important in many industrial processes because of the need to improve both the efficiency and environmental acceptability of industrial processes. The unique properties of supported nanomaterials have attracted researchers to develop efficient catalytic materials in nanoscale. The extremely small size of the particles maximizes the surface area exposed to the reactant, allowing more reactions to occur. The environmental hazards resulting from the conventional manufacturing procedures for organic fine chemicals and intermediates by classical oxidation catalysis using mineral acids have forced chemical industries to seek less polluting processes. The present study aimed to oxidize p-toluidine by hydrogen peroxide in the presence of magnetite supported on nanocrystalline titanium silicalite-1 (M/NTS) zeolite at ambient temperature. The products detected are 4,4'-dimethylazobenzene as major product and 4,4'-dimethylazoxybenzene as minor product. Good selectivity, low cost, low wastage of materials and enhanced environmental friendliness of heterogeneous magnetite nanoparticle supported zeolite catalysts were observed. The effect of various reaction parameters such as mole ratio, catalyst weight and reusability of catalyst were studied. At the optimum reaction conditions, the oxidation activity of M/NTS catalyst was compared with M/NS catalyst, and it was found that titanium in the framework of M/NTS provided higher activity and selectivity.
RESUMEN
A new chlorobenzylidene imine ligand, (E)-1-((5-chloro-2-hydroxybenzylidene)amino) naphthalen-2-ol (HL), and its [Zn(L)(NO3)(H2O)3], [La(L)(NO3)2(H2O)2], [VO(L)(OC2H5)(H2O)2], [Cu(L)(NO3)(H2O)3], and [Cr(L)(NO3)2(H2O)2], complexes were synthesized and characterized. The characterization involved elemental analysis, FT-IR, UV/Vis, NMR, mass spectra, molar conductance, and magnetic susceptibility measurements. The obtained data confirmed the octahedral geometrical structures of all metal complexes, while the [VO(L)(OC2H5)(H2O)2] complex exhibited a distorted square pyramidal structure. The complexes were found to be thermally stable based on their kinetic parameters determined using the Coats-Redfern method. The DFT/B3LYP technique was employed to calculate the optimized structures, energy gaps, and other important theoretical descriptors of the complexes. In vitro antibacterial assays were conducted to evaluate the complexes' potential against pathogenic bacteria and fungi, comparing them to the free ligand. The compounds exhibited excellent fungicidal activity against Candida albicans ATCC: 10231 (C. albicans) and Aspergillus negar ATCC: 16404 (A. negar), with inhibition zones of HL, [Zn(L)(NO3)(H2O)3], and [La(L)(NO3)2(H2O)2] three times higher than that of the Nystatin antibiotic. The DNA binding affinity of the metal complexes and their ligand was investigated using UV-visible, viscosity, and gel electrophoresis methods, suggesting an intercalative binding mode. The absorption studies yielded Kb values ranging from 4.40 × 105 to 7.30 × 105 M-1, indicating high binding strength to DNA comparable to ethidium bromide (value 107 M-1). Additionally, the antioxidant activity of all complexes was measured and compared to vitamin C. The anti-inflammatory efficacy of the ligand and its metal complexes was evaluated, revealing that [Cu(L)(NO3)(H2O)3] exhibited the most effective activity compared to ibuprofen. Molecular docking studies were conducted to explore the binding nature and affinity of the synthesized compounds with the receptor of Candida albicans oxidoreductase/oxidoreductase INHIBITOR (PDB ID: 5V5Z). Overall, the combined findings of this work demonstrate the potential of these new compounds as efficient fungicidal and anti-inflammatory agents. Furthermore, the photocatalytic effect of the Cu(II) Schiff base complex/GO was examined.
Asunto(s)
Antiinfecciosos , Complejos de Coordinación , Bases de Schiff/química , Antioxidantes/farmacología , Azul de Metileno , Complejos de Coordinación/química , Simulación del Acoplamiento Molecular , Ligandos , Fotólisis , Espectroscopía Infrarroja por Transformada de Fourier , Antiinfecciosos/química , Antibacterianos/farmacología , ADN/química , Zinc , Antiinflamatorios/farmacología , OxidorreductasasRESUMEN
A sensitive, selective, and simple spectrofluorimetric method for the detection and determination of cypermethrin (CYP) in various samples based on thioglycolic acid-caped Mn-doped ZnS quantum dots (TGA@Mn-ZnS-QDs) is reported. These quantum dots were synthesized using the Gonzalez method. The synthesized quantum dots were structurally characterized with the help of different spectroscopic techniques including X-ray diffraction (XRD) and energy dispersive X-ray (EDX) techniques and fluorescence spectroscopy. The quantum dots were used for spectrofluorimetric detection and determination of CYP. The emission peak of these quantum dots at 632 nm showed a linear quenching with increasing the concentration of CYP, noticing an excellent linear relationship between F°/F values and CYP in the range of 0.5-12 µg mL-1 with a correlation coefficient (R2) of 0.992. The influence of different physiochemical parameters such as time, pH, the concentration of quantum dots, and other pesticides interference on the fluorescence quenching was investigated. The detection limit was calculated to be 0.132 µg mL-1. The developed method was successfully applied for the detection and determination of CYP in various spiked samples (tomato, okra, pea, spinach, soil, and water) using the spike and recovery methods. The percent recoveries of CYP from these samples were found to be 77 ± 0.05% to 95 ± 0.12% at various levels.
Asunto(s)
Monitoreo del Ambiente , Plaguicidas , Piretrinas , Suelo , Espectrometría de Fluorescencia/métodos , Sulfuros/análisis , Agua/química , Compuestos de ZincRESUMEN
Biocompatible tryptophan-derived copper (1) and zinc (2) complexes with norharmane (ß-carboline) were designed, synthesized, characterized, and evaluated for the potential anticancer activity in vitro and in vivo. The in vitro cytotoxicity of both complexes 1 and 2 were assessed against two cancerous cells: (human breast cancer) MCF7 and (liver hepatocellular cancer) HepG2 cells with a non-tumorigenic: (human embryonic kidney) HEK293 cells. The results exhibited a potentially decent selectivity of 1 against MCF7 cells with an IC50 value of 7.8 ± 0.4 µM compared to 2 (less active, IC50 ~ 20 µM). Furthermore, we analyzed the level of glutathione, lipid peroxidation, and visualized ROS generation to get an insight into the mechanistic pathway and witnessed oxidative stress. These in vitro results were ascertained by in vivo experiments, which also supported the free radical-mediated oxidative stress. The comet assay confirmed the oxidative stress that leads to DNA damage. The histopathology of the liver also ascertained the low toxicity of 1.
Asunto(s)
Antineoplásicos/farmacología , Neoplasias de la Mama/tratamiento farmacológico , Carbolinas/farmacología , Cobre/farmacología , Triptófano/farmacología , Animales , Neoplasias de la Mama/metabolismo , Línea Celular , Línea Celular Tumoral , Ensayo Cometa/métodos , Daño del ADN/efectos de los fármacos , Femenino , Glutatión/metabolismo , Células HEK293 , Células Hep G2 , Humanos , Peroxidación de Lípido/efectos de los fármacos , Células MCF-7 , Estrés Oxidativo/efectos de los fármacos , Ratas , Especies Reactivas de Oxígeno/metabolismo , Zinc/farmacologíaRESUMEN
A new analytical method for measuring copper in food and water was developed and validated, employing a solid-phase extraction (SPE) technique combined with digital-image-based (DIB) detection. A novel magnetic adsorbent of zinc ferrite/Citrullus colocynthis biochar (ZF@C.BC) was used to preconcentrate copper. A magnetic tip was used to separate the copper-loaded adsorbent from the extraction medium and to dispense it to the DIB plate. In-situ desorption and development of the spot color with iodide-starch reagent were carried out, and a digital image of the developed spots was captured using a smartphone and processed using ImageJ software. The copper adsorption capacity was 91.3 mg g-1. Desorption was effected using a 0.3 mol L-1 hydrochloric acid. The preconcentration factor was 300, the limit of detection was 4.8 µg L-1, the linearity was 16-600 µg L-1 and the sample throughput was 12 h-1. The developed approach was validated by analyzing food and water samples, confirming recoveries ≥ 91 % and 88 %, respectively, with RSD ≤ 8.4 %, n = 3.
Asunto(s)
Cobre , Agua , Adsorción , Alimentos , Extracción en Fase Sólida/métodos , Fenómenos MagnéticosRESUMEN
The polymeric material polyvinyl pyrrolidine/carboxymethyl cellulose (PVP/CMC) was mixed with different quantities of tungsten-trioxide nanoparticles (WO3 NPs). The samples were created using the casting method and Pulsed Laser Ablation (PLA). The manufactured samples were analyzed by utilizing various methods. The halo peak of the PVP/CMC was located at 19.65°, confirming its semi-crystalline nature, as shown in the XRD analysis. FT-IR spectra of pure PVP/CMC composite and PVP/CMC composite incorporated with various contents of WO3 obtained a shift in band locations and change in intensity. Optical band gap was calculated via UV-Vis spectra, which decreased when increasing the laser-ablation time. Thermogravimetric analyses (TGA) curves showed that samples' thermal stability had improved. The frequency-dependent composite films were used to determine AC conductivity of the generated films. When increasing the content of tungsten-trioxide nanoparticles, both (ε') and (ε'') increased. The incorporation of tungsten trioxide enhanced the ionic conductivity of PVP/CMC/WO3 nano-composite to a maximum of 10-8 S/c. It is expected that these studies will have a significant impact on several utilizations, such as energy storage, polymer organic semiconductors, and polymer solar cells.
RESUMEN
BACKGROUND: Stroke is a serious health problem that can lead to the development of depressive symptoms, sleep disturbances, and functional dependence in stroke survivors. The change in stroke survivors' quality of life results in negative health outcomes for stroke survivors and caregivers. This study aims to investigate the association between sleep quality and depressive symptoms among stroke survivors and caregivers in Saudi Arabia. METHODS: A cross-sectional design was used to collect data from 100 stroke survivors and 80 caregivers using the patient health questionnaire and Pittsburgh Sleep Quality Index. RESULTS: 43% of the stroke survivors reported depressive symptoms and 65% had poor sleep quality; 21% of the caregivers reported depressive symptoms and 46% reported poor sleep quality. A strong association between sleep quality and depressive symptoms was detected for the stroke survivors and caregivers: (r = 0.885, p < 0.001); (r = 0.669, p < 0.001), respectively. A strong association was found between caregivers' depressive symptoms and patient post-stroke depressive symptoms (r = 0.502, p < 0.001). A moderate association was found between stroke survivors' sleep quality and caregivers' sleep quality (r = 0.407, p < 0.001). There was a moderate association between stroke survivors' depressive symptoms and caregivers' sleep quality (r = 0.456, p < 0.001). Moreover, there was a moderate association between stroke survivors' sleep quality and caregivers' depressive symptoms (r = 0.492, p < 0.001). CONCLUSION: Poor sleep quality and depressive symptoms are common among stroke survivors and caregivers. This study found an association between the two variables. Therefore, depressive symptoms and sleep disturbances in stroke survivors and caregivers should receive more attention. Future research should focus on an interventional study to enhance sleep quality and decrease the risk of depressive symptoms.
RESUMEN
In recent years, nanotechnology has become a considerable research interest in the area of preparation of nanocatalysts based on naturally occurring polysaccharides. Chitosan (CS), as a naturally occurring biodegradable and biocompatible polysaccharide, is successfully utilized as an ideal template for the immobilization of metal oxide nanoparticles. In this study, zinc oxide nanoparticles have been doped within a chitosan matrix at dissimilar weight percentages (5, 10, 15, 20, and 25 wt.% CS/ZnO) and have been fabricated by using a simple solution casting method. The prepared solutions of the nanocomposites were cast in a Petri-dish and were subsequently shaped as a thin film. After that, the structural features of the nanocomposite film have been studied by measuring the FTIR, SEM, and XRD analytical tools. FTIR spectra showed the presence of some changes in the major characteristic peaks of chitosan due to interaction with ZnO nanoparticles. In addition, SEM graphs exhibited dramatic morphology changes on the chitosan surface, which is attributed to the surface adsorption of ZnO molecules. Based on the results of the investigated organic catalytic reactions, the prepared CS/ZnO nanocomposite film (20 wt.%) could be a viable an effective, recyclable, and heterogeneous base catalyst in the synthesis of thiazoles. The results showed that the nanocomposite film is chemically stable and can be collected and reused in the investigated catalytic reactions more than three times without loss of its catalytic activity.
RESUMEN
Recently, Strontium oxide (SrO) nanoparticles (NPs) and hybrids outperformed older commercial catalysts in terms of catalytic performance. Herein, we present a microwave-assisted easy in situ solution casting approach for the manufacture of strontium oxide nanoparticles doped within a naturally occurring polymer, chitosan (CS), at varying weight percentages (2.5, 5, 10, 15, and 20 wt.% SrO/chitosan). To construct the new hybrid material as a thin film, the produced nanocomposite solutions were cast in petri dishes. The aim of the research was to synthesize these hybrid nanocomposites, characterize them, and evaluate their catalytic potential in a variety of organic processes. The strontium oxide-chitosan nanocomposites were characterized using Fourier transform infrared (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM) techniques. All the results confirmed the formation of chitosan-strontium oxide nanocomposite. FTIR spectrum of nanocomposite showed the presence of a characteristic peak of Sr-O bond. Furthermore, XRD revealed that SrO treatment increased the crystallinity of chitosan. The particle size was calculated using the Debye-Scherrer formula, and it was determined to be around 36 nm. The CS-SrO nanocomposite has been proven to be a highly efficient base promoter for the synthesis of 2-hydrazono [1,3,4]thiadiazole derivatives. To optimize the catalytic method, the reaction factors were investigated. The approach has various advantages, including higher reaction yields, shorter reaction durations, and milder reaction conditions, as well as the catalyst's reusability for several applications.
RESUMEN
Background: Tocopherol acetate (TA) is known as a skin moisturizing and photoprotective agent. One major drawback with tocopherol and its derivatives remains its limited stability. Aim: To develop highly stable TA-containing ethosomal gel (TAEG) as an advanced dosage form. Methods: A cold method technique was used to produce the ethosomes. An in vitro evaluation of viscosity, conductivity, and pH stability was carried out for three months. An in vitro physical characterization of the nanoparticles (NPs) that included particle size (PS), zeta potential (ZP), transmission electron microscopy (TEM), and Fourier-transform infrared (FTIR) spectroscopy analysis was then performed. Organoleptic evaluation, thermostability at 8 °C, 25 °C, 40 °C and 40 °C ± 75% RH, pH, conductivity, viscosity, and spreadability measurements were also performed in vitro for three months. An ex vivo permeation study was performed in phosphate-buffered solution (1× PBS; pH 5.5 or pH 7.4) at 37 ± 0.2 °C by using rat abdominal skin and the Franz diffusion cell method. The data of three independent experiments were expressed as mean ± SD. A two-way ANOVA was applied to compare data on TAEG versus TA control gel (TACG). Results: PS of the ethosomes was in the range of 144−289 nm. A total of nine formulations were developed. Optimized TAEG formulation (TA-5) was selected based on the highest entrapment efficiency (EE) of 99.71%, while the stability, the PS, and the uniformity-based polydispersity index (PDI) were also among the best. TA-5 exhibited smooth spherical ethosomal NPs with PS of 200.6 nm, ZP value of −18.6 V, and PDI of 0.465. Stability data obtained for TA-5 in terms of rheology, conductivity, and pH presented no significant change (p > 0.05) during the entire study duration. Rheological studies indicated that TA-5 followed a non-Newtonian behavior of shear thinning system. The ex vivo drug permeation was 44.55 ± 0.01% in TA-5 and the drug retention in skin was 51.20%, which was significantly higher than TACG as observed after 24 h permeation study (p < 0.05). Conclusions: The newly developed TAEG formulation appears promising to enhance the effectivity of TA and its topical application.
RESUMEN
The incorporation of tungsten trioxide (WO3) by various concentrations of graphitic carbon nitride (g-C3N4) was successfully studied. X-ray diffraction (XRD), Scanning Electron Microscope (SEM), and Diffused Reflectance UV-Vis techniques were applied to investigate morphological and microstructure analysis, diffused reflectance optical properties, and photocatalysis measurements of WO3/g-C3N4 photocatalyst composite organic compounds. The photocatalytic activity of incorporating WO3 into g-C3N4 composite organic compounds was evaluated by the photodegradation of both Methylene Blue (MB) dye and phenol under visible-light irradiation. Due to the high purity of the studied heterojunction composite series, no observed diffraction peaks appeared when incorporating WO3 into g-C3N4 composite organic compounds. The particle size of the prepared composite organic compound photocatalysts revealed no evident influence through the increase in WO3 atoms from the SEM characteristic. The direct and indirect bandgap were recorded for different mole ratios of WO3/g-C3N4, and indicated no apparent impact on bandgap energy with increasing WO3 content in the composite photocatalyst. The composite photocatalysts' properties better understand their photocatalytic activity degradations. The pseudo-first-order reaction constants (K) can be calculated by examining the kinetic photocatalytic activity.
RESUMEN
Quorum sensing (QS) and biofilm inhibition are recognized as the novel drug targets for the broad-spectrum anti-infective strategy to combat the infections caused by drug-resistant bacterial pathogens. Many compounds from medicinal plants have been found to demonstrate anti-infective activity. However, broad-spectrum anti-QS and antibiofilm efficacy and their mode of action are poorly studied. In this study, the efficacy of coumarin was tested against QS-regulated virulent traits of Gram-negative bacteria. Coumarin inhibited the production of violacein pigment in Chromobacterium violaceum 12472 by 64.21%. Similarly, there was 87.25, 70.05, 76.07, 58.64, 48.94, and 81.20% inhibition of pyocyanin, pyoverdin, and proteolytic activity, lasB elastase activity, swimming motility, and rhamnolipid production, respectively, in Pseudomonas aeruginosa PAO1. All tested virulence factors of Serratia marcescens MTCC 97 were also suppressed by more than 50% at the highest sub-minimum inhibitory concentration. Moreover, the biofilms of bacterial pathogens were also inhibited in a dose-dependent manner. Molecular docking and molecular dynamics (MD) simulation gave insights into the possible mode of action. The binding energy obtained by docking studies ranged from -5.7 to -8.1 kcal mol-1. Coumarin was found to be docked in the active site of acylhomoserine lactone (AHL) synthases and regulatory proteins of QS. MD simulations further supported the in vitro studies where coumarin formed a stable complex with the tested proteins. The secondary structure of all proteins showed a negligible change in the presence of coumarin. Computational studies showed that the possible mechanisms of anti-QS activity were the inhibition of AHL synthesis, antagonization of QS-regulatory proteins, and blocking of the receptor proteins. The findings of this study clearly highlight the potency of coumarin against the virulence factors of Gram-negative bacterial pathogens that may be developed as an effective inhibitor of QS and biofilms.
RESUMEN
Copper compounds are promising candidates for next-generation metal anticancer drugs. Therefore, we synthesized and characterized a formate bridged 1D coordination polymer [Cu(L)(HCOO)2]n, (L = 2-methoxy-6-methyl-3-((quinolin-8-ylimino)methyl)chroman-4-ol), PCU1, wherein the Cu(ii) center adopts a square pyramidal coordination environment with adjacent CuCu distances of 5.28 Å. Primarily, in vitro DNA interaction studies revealed a metallopolymer which possesses high DNA binding propensity and cleaves DNA via the oxidative pathway. We further analysed its potential on cancerous cells MCF-7, HeLa, A549, and two non-tumorigenic cells HEK293 and HBE. The selective cytotoxicity potential of PCU1 against A549 cells driven us to examine the mechanistic pathways comprehensively by carrying out various assays viz, cell cycle arrest, Annexin V-FTIC/PI assay, autophagy, intercellular localization, mitochondrial membrane potential 'MMP', antiproliferative assay, and gene expression of TGF-ß and MMP-2.
Asunto(s)
Adenocarcinoma del Pulmón/tratamiento farmacológico , Antineoplásicos , Cromonas , Complejos de Coordinación , Cobre , Neoplasias Pulmonares/tratamiento farmacológico , Antineoplásicos/química , Antineoplásicos/farmacología , Apoptosis/efectos de los fármacos , Puntos de Control del Ciclo Celular/efectos de los fármacos , Línea Celular , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Cromonas/química , Cromonas/farmacología , Complejos de Coordinación/química , Complejos de Coordinación/farmacología , Cobre/química , Cobre/farmacología , ADN/química , División del ADN , Humanos , Metaloproteinasa 2 de la Matriz/genética , Potencial de la Membrana Mitocondrial/efectos de los fármacos , Factor de Crecimiento Transformador beta/genéticaRESUMEN
Cellulose nanofibers were covalently functionalized using diethylenetriamine penta (methylene phosphonic acid) and studied for the extraction of heavy metal ions. The surface-functionalized nanofibers showed a high adsorption capacity towards heavy metal ions as compared to bare nanofibers. The elemental composition and surface morphology of the prepared bio-adsorbent was characterized by X-ray photoelectron spectroscopy, attenuated total reflectance infrared spectroscopy, field emission scanning electron microscopy, and energy dispersive spectroscopy. The prepared material was studied to develop a column-based solid phase extraction method for the preconcentration of trace metal ions and their determination by inductively coupled plasma optical emission spectroscopy. The batch experimental data was well fitted to Langmuir adsorption isotherms (R2 > 0.99) and follows pseudo-second-order kinetics. The experimental variables such as sample pH, equilibrium time, column breakthrough, sorption flow rate, the effect of coexisting ions, and eluent type were systematically studied and optimized accordingly. The detection limit of the proposed method was found to be 0.03, 0.05, and 0.04 µg L-1 for Cu(II), Pb(II), and Cd(II), respectively. Certified Reference Materials were analyzed to validate the proposed method against systematic and constant errors. At a 95% confidence level, the Student's t-test values were less than the critical Student's t value (4.302). The developed method was successfully employed for the preconcentration and determination of trace metal ions from real water samples such as river water and industrial effluent.
RESUMEN
Herein, we report PAN-g-Alg@Ag-based nanocatalysts synthesis via in situ oxidative free-radical polymerization of acrylonitrile (AN) using Alg@Ag nanoparticles (Alg@Ag NPs). Various analytical techniques, including FTIR, XRD, SEM, TEM, UV-Vis, and DSC, were employed to determine bonding interactions and chemical characteristics of the nanocatalyst. The optimized response surface methodology coupled central composite design (RSM-CCD) reaction conditions were a 35-min irradiation time in a 70-mg L-1 2,4-dinitrophenol (DNP) solution at pH of 4.68. Here, DNP degradation was 99.46% at a desirability of 1.00. The pseudo-first-order rate constant (K1) values were 0.047, 0.050, 0.054, 0.056, 0.059, and 0.064 min-1 with associated half-life (t1/2) values of 14.74, 13.86, 12.84, 12.38, 11.74, 10.82, and 10.04 min that corresponded to DNP concentrations of 10, 20, 30, 40, 50, 60, and 70 mg L-1, respectively, in the presence of PAN-g-Alg@Ag (0.03 g). The results indicate that the reaction followed the pseudo-first-order kinetic model with an R2 value of 0.99. The combined absorption properties of PAN and Alg@Ag NPs on copolymerization on the surface contributed more charge density to surface plasmon resonance (SPR) in a way to degrade more and more molecules of DNP together with preventing the recombination of electron and hole pairs within the photocatalytic process.
RESUMEN
The green mechanism for the synthesis of nanoparticles and their application to the wastewater treatment is of inordinate curiosity to the research community. Herein we outline a novel method for the synthesis of silver nanoparticles via a green route using alginate-guar gum blend (GG-Alg@Ag) and their application to degrade methylene blue (MB) dye. The synthesized material was characterized by FTIR, XRD, SEM-EDX, TEM, TGA-DTG, AFM, and UV-vis techniques. A combination of RSM and CCD was employed to compute the system and optimized values of various interacting parameters such as exposure time (120 min), pH (4.98), dye concentration (194 mg L-1), and catalyst dose (0.07 g) with a photodegradation capacity of 92.33% and desirability 1.0. The mechanism of degradation reaction was best elucidated by the pseudo-second-order model suggesting chemical deposition of MB on the GG-Alg@Ag surface through followed by the reduction mechanism in the occupancy of visible light. The optical studies indicated a value of 2.5 eV by Tauc's plot for bandgap energy (E g) for GG-Alg@Ag bionanocomposite.
RESUMEN
The development of preferentially selective cancer chemotherapeutics is a new trend in drug research. Thus, we designed and synthesized novel ternary complexes, [Cu(tryp)(Hnor)2(DMSO)]NO3 (1) and [Zn(tryp)(Hnor)2(DMSO)]NO3 (2) (tryp = DL-Tryptophane; Hnor = Norharmane, ß-carboline; DMSO = Dimethyl sulfoxide), characterized with elemental analysis, FTIR, UV-vis, FL, NMR, ESI-MS, and molar conductivity. Furthermore, the TD-DFT studies with UV-vis and FTIR validated the proposed structures of 1 and 2. Moreover, we evaluated the HOMO-LUMO energy gap and found that 1 has a smaller energy gap than 2. Then, 1 and 2 were assessed for anticancer chemotherapeutic potential against cancer cell lines MCF7 (human breast cancer) and HepG2 (human liver hepatocellular carcinoma) as well as the non-tumorigenic HEK293 (human embryonic kidney) cells. The MTT assay illustrated the preferentially cytotoxic behavior of 1 when compared with that of 2 and cisplatin (standard drug) against MCF7 cells. Moreover, 1 was exposed to MCF7 cells, and the results indicated the arrest of the G2/M phases, which followed the apoptotic pathway predominantly. Generation of ROS, GSH depletion, and elevation in LPO validated the redox changes prompted by 1. These studies establish the great potential of 1 as a candidate for anticancer therapeutics.
RESUMEN
The inimical effects associated with heavy metals are serious concerns, particularly with respect to global health-related issues, because of their non-ecological characteristics and high toxicity. Current research in this area is focused on the synthesis of poly(acrylamide) grafted Cell@Fe3O4 nanocomposites via oxidative free radical copolymerization of the acrylamide monomer and its application for the removal of Pb(II). The hybrid material was analyzed using different analytical techniques, including thermogravimetric analysis (TGA), Fourier transform-infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) analysis. The efficacious impact of variable parameters, including contact time, pH, material dose, initial Pb(II) concentration, and the temperature, was investigated and optimized using both batch and artificial neural networks (ANN). Surface digestion of metal ions is exceedingly pH-dependent, and higher adsorption efficiencies and adsorption capacities of Pb(II) were acquired at a pH value of 5. The acquired equilibrium data were analyzed using different isotherm models, including Langmuir, Freundlich, Temkin, and Redlich-Peterson models. In this investigation, the best performance was obtained using the Langmuir model. The maximum adsorption capacity of the material investigated via monolayer formation was determined to be 314.47 mg g-1 at 323 K, 239.74 mg g-1 at 313 K, and 100.79 mg g-1 at 303 K.