RESUMEN
As is well-known, the phonon and electron thermal conductivity of a thin film generally decreases as its thickness scales down to nanoscales due to size effects, which have dramatic engineering effects, such as overheating, low reliability, and reduced lifetime of processors and other electronic components. However, given that thinner films have higher surface-to-volume ratios, the predominant surface effects in these nanomaterials enable the transport of thermal energy not only inside their volumes but also along their interfaces. In polar nanofilms, this interfacial transport is driven by surface phonon polaritons, which are electromagnetic waves generated at mid-infrared frequencies mainly by the phonon-photon coupling along their surfaces. Theory predicts that these polaritons can enhance the in-plane thermal conductivity of suspended silica films to values higher than the corresponding bulk one, as their thicknesses decrease through values smaller than 200 nm. In this work, we experimentally demonstrate this thermal conductivity enhancement. The results show that the in-plane thermal conductivity of a 20 nm thick silica film at room temperature is nearly twice its lattice vibration counterpart. Additional thermal diffusivity measurements reveal that the diffusivity of a silica film also increases as its thickness decreases, such that the ratio of thermal conductivity/thermal diffusivity (volumetric heat capacity) remains nearly independent of the film thickness. The experimental results obtained here will enable one to build on recent interesting theoretical predictions, highlight the existence of a new heat channel at the nanoscale, and provide a new avenue to engineer thermally conductive nanomaterials for efficient thermal management.
RESUMEN
Through the execution of scientific innovations, "smart materials" are shaping the future of technology by interacting and responding to changes in our environment. To make this a successful reality, proper component selection, synthesis procedures, and functional active agents must converge in practical and resource-efficient procedures to lay the foundations for a profitable and sustainable industry. Here we show how the reaction time, temperature, and surface stabilizer concentration impact the most promising functional properties in a cotton-based fabric coated with silver nanoparticles (AgNPs@cotton), i.e., the thermal and bactericidal response. The coating quality was characterized and linked to the selected synthesis parameters and correlated by a parallel description of "proof of concept" experiments for the differential heat transfer (conversion and dissipation properties) and the bactericidal response tested against reference bacteria and natural bacterial populations (from a beach, cenote, and swamp of the Yucatan Peninsula). The quantification of functional responses allowed us to establish the relationship between (i) the size and shape of the AgNPs, (ii) the collective response of their agglomerates, and (iii) the thermal barrier role of a surface modifier as PVP. The procedures and evaluations in this work enable a spectrum of synthesis coordinates that facilitate the formulation of application-modulated fabrics, with grounded examples reflected in "smart packaging", "smart clothing", and "smart dressing".
RESUMEN
In recent years, polymer engineering, at the molecular level, has proven to be an effective strategy to modulate thermal conductivity. Polymers have great applicability in the food packaging industry, in which transparency, lightness, flexibility, and biodegradability are highly desirable characteristics. In this work, a possible manner to adjust the thermal conductivity in cassava starch biopolymer films is presented. Our approach is based on modifying the starch molecular structure through the addition of borax, which has been previously used as an intermolecular bond reinforcer. We found that the thermal conductivity increases linearly with borax content. This effect is related to the crosslinking effect that allows the principal biopolymer chains to be brought closer together, generating an improved interconnected network favoring heat transfer. The highest value of the thermal conductivity is reached at a volume fraction of 1.40% of borax added. Our analyses indicate that the heat transport improves as borax concentration increases, while for borax volume fractions above 1.40%, heat carriers scattering phenomena induce a decrement in thermal conductivity. Additionally, to obtain a deeper understanding of our results, structural, optical, and mechanical characterizations were also performed.
RESUMEN
Hysteresis loops exhibited by the thermophysical properties of VO2 thin films deposited on either a sapphire or silicon substrate have been experimentally measured using a high frequency photothermal radiometry technique. This is achieved by directly measuring the thermal diffusivity and thermal effusivity of the VO2 films during their heating and cooling across their phase transitions, along with the film-substrate interface thermal boundary resistance. These thermal properties are then used to determine the thermal conductivity and volumetric heat capacity of the VO2 films. A 2.5 enhancement of the VO2 thermal conductivity is observed during the heating process, while its volumetric heat capacity does not show major changes. This sizeable thermal conductivity variation is used to model the operation of a conductive thermal diode, which exhibits a rectification factor about 30% for small temperature differences (≈70 °C) on its terminals. The obtained results grasp thus new insights on the control of heat currents.
RESUMEN
The dual-phase lagging (DPL) model has been considered as one of the most promising theoretical approaches to generalize the classical Fourier law for heat conduction involving short time and space scales. Its applicability, potential, equivalences, and possible drawbacks have been discussed in the current literature. In this study, the implications of solving the exact DPL model of heat conduction in a three-dimensional bounded domain solution are explored. Based on the principle of causality, it is shown that the temperature gradient must be always the cause and the heat flux must be the effect in the process of heat transfer under the dual-phase model. This fact establishes explicitly that the single- and DPL models with different physical origins are mathematically equivalent. In addition, taking into account the properties of the Lambert W function and by requiring that the temperature remains stable, in such a way that it does not go to infinity when the time increases, it is shown that the DPL model in its exact form cannot provide a general description of the heat conduction phenomena.