RESUMEN
Colorectal cancer (CRC) is the third most common and second most deadly type of cancer worldwide, representing 11.3% of the diagnosed cancer cases and resulting in 10.2% (0.88 million) of the cancer related deaths in 2020. CRCs are typically detected at the late stage, which leads to high mortality and morbidity. Mortality and poor prognosis are partially caused by cancer recurrence and postoperative complications. Patient survival could be increased by improving precision in surgical resection using accurate surgical guidance tools based on diffuse reflectance spectroscopy (DRS). DRS enables real-time tissue identification for potential cancer margin delineation through determination of the circumferential resection margin (CRM), while also supporting non-invasive and label-free approaches for laparoscopic surgery to avoid short-term complications of open surgery as suitable. In this study, we have estimated the scattering properties and chromophore concentrations based on 2949 DRS measurements of freshly excised ex vivo specimens of 47 patients, and used this estimation to classify normal colorectal wall (CW), fat and tumor tissues. DRS measurements were performed with fiber-optic probes of 630 µm source-detector distance (SDD; probe 1) and 2500 µm SDD (probe 2) to measure tissue layers â¼0.5-1 mm and â¼0.5-2 mm deep, respectively. By using the 5-fold cross-validation of machine learning models generated with the classification and regression tree (CART) algorithm, we achieved 95.9 ± 0.7% sensitivity, 98.9 ± 0.3% specificity, 90.2 ± 0.4% accuracy, and 95.5 ± 0.3% AUC for probe 1. Similarly, we achieved 96.9 ± 0.8% sensitivity, 98.9 ± 0.2% specificity, 94.0 ± 0.4% accuracy, and 96.7 ± 0.4% AUC for probe 2.
Asunto(s)
Neoplasias Colorrectales , Tecnología de Fibra Óptica , Humanos , Análisis Espectral/métodos , Biomarcadores , Neoplasias Colorrectales/diagnóstico , Neoplasias Colorrectales/cirugíaRESUMEN
Rapid advancement of novel optical spectroscopy and imaging systems relies on the availability of well-characterised and reproducible protocols for phantoms as a standard for the validation of the technique. The tissue-mimicking phantoms are also used to investigate photon transport in biological samples before clinical trials that require well-characterized phantoms with known optical properties (reduced scattering (µ's) and absorption (µa) coefficients). However, at present, there is limited literature available providing well-characterized phantom recipes considering various biomarkers and tested over a wide range of optical properties covering most of the human organs and applicable to multimodal optical spectroscopy. In this study, gelatin-based phantoms were designed to simulate tissue optical properties where India ink and Intralipid were used as absorbing and scattering agents, respectively. Multiple biomarkers were simulated by varying the gelatin concentration to mimic the change in tissue hydration and hydroxyapatite concentration to mimic bone signature. The recipe along with biomarkers were optimized and characterised over a wide range of optical properties (µa from 0.1 to 0.5 cm-1; µ's from 5 to 15 cm-1) relevant to human tissue using a broadband time-domain diffuse optical spectrometer. The data collected showed a linear relationship between the concentration of ink/lipids and µa/µ's values with negligible coupling between µa and µ's values. While being stored in a refrigerator post-fabrication, the µa and µ's did not change significantly (<4% coefficient of variation, 'CV') over three weeks. The reproducibility in three different sets was validated experimentally and found to be strong with a variation of ≤6% CV in µa and ≤9% CV in µ's. From the 3 × 3 data of µa and µ's matrices, one can deduce the recipe for any target absorption or reduced scattering coefficient. The applicability of the phantoms was tested using diffuse reflectance and Raman spectrometers. A use case application was demonstrated for Raman spectroscopy where hydration and hydroxyapatite phantoms were designed to characterize the Raman instrument. The Raman instrument could detect the change in 1% of HA and 5% of hydration. This study presents a first-of-its-kind robust, well-characterized, multi-biomarker phantom recipe for calibration and benchmarking of multimodal spectroscopy devices assisting in their clinical translation.
Asunto(s)
Gelatina , Espectrometría Raman , Humanos , Reproducibilidad de los Resultados , Biomarcadores , DurapatitaRESUMEN
Early diagnosis of oral cancer is critical to improve the survival rate of patients. Raman spectroscopy, a non-invasive spectroscopic technique, has shown potential in identifying early-stage oral cancer biomarkers in the oral cavity environment. However, inherently weak signals necessitate highly sensitive detectors, which restricts widespread usage due to high setup costs. In this research, the fabrication and assembly of a customised Raman system that can adapt three different configurations for the in vivo and ex vivo analysis is reported. This novel design will help in reducing the cost required to have multiple Raman instruments specific for a given application. First, we demonstrated the capability of a customized microscope for acquiring Raman signals from a single cell with high signal-to-noise ratio. Generally, when working with liquid samples with low concentration of analytes (such as saliva) under a microscope, excitation light interacts with a small sample volume, which may not be representative of whole sample. To address this issue, we have designed a novel long-path transmission set-up, which was found to be sensitive towards low concentration of analytes in aqueous solution. We further demonstrated that the same Raman system can be incorporated with the multimodal fibre optical probe to collect in vivo data from oral tissues. In summary, this flexible, portable, multi-configuration Raman system has the potential to provide a cost-effective solution for complete screening of precancer oral lesions.
Asunto(s)
Neoplasias de la Boca , Humanos , Neoplasias de la Boca/diagnóstico , Relación Señal-Ruido , Espectrometría Raman/métodos , MicroscopíaRESUMEN
Non-linear materials such as upconverting nanoparticles (UCNPs) are emerging technology with fast-growing applications in various fields. The power density dependence of the emission quantum yield (QY) of these non-linear materials makes them challenging to characterize using currently available commercial QY systems. We propose a multimodal system to measure QY over a wide dynamic range (1:104), which takes into account and compensates for various distorting parameters (scattering, beam profile, inner filter effect and bandwidth of emission lines). For this, a beam shaping approach enabling speckle free beam profiles of two different sizes (530 µm or 106 µm) was employed. This provides low noise high-resolution QY curves. In particular, at low power densities, a signal-to-noise ratio of >50 was found. A Tm-based core-shell UCNP with excitation at 976 nm and emission at 804 nm was investigated with the system.
RESUMEN
Gas in scattering media absorption spectroscopy (GASMAS) is a novel optical technology employing near-infrared light. It has a potential use in the medical setting as a monitoring and diagnostic tool by detecting molecular oxygen within gas pockets and thus may be a useful adjunct in respiratory monitoring. GASMAS has potential advantages over other monitoring devices currently used in clinical practice. It is a non-invasive, continuous, non-ionising technology and provides unique information about molecular oxygen content inside the lungs. GASMAS may have a future role in optimising respiratory management of neonates in different clinical scenarios such as monitoring cardiorespiratory transition in the delivery room, assessing surfactant deficiency, and optimising endotracheal tube positioning. This article aims to summarise current evidence exploring GASMAS application in a neonate, discuss possible clinical benefits, and compare with other devices that are currently used in neonatal care. IMPACT: This article presents a novel optical technique to measure lung oxygen concentrations that may have important clinical uses. This review summarises the current literature investigating the concept of optical lung oxygen measurement. Information from this review can guide researchers in future studies.
Asunto(s)
Gases , Oxígeno , Recién Nacido , Humanos , Análisis Espectral/métodos , Oxígeno/química , Monitoreo Fisiológico/métodos , Frecuencia RespiratoriaRESUMEN
The quantum yield is a critically important parameter in the development of lanthanide-based upconverting nanoparticles (UCNPs) for use as novel contrast agents in biological imaging and optical reporters in assays. The present work focuses on the influence of the beam profile in measuring the quantum yield (Ï) of nonscattering dispersions of nonlinear upconverting probes, by establishing a relation between Ï and excitation light power density from a rate equation analysis. A resulting 60% correction in the measured Ï due to the beam profile utilized for excitation underlines the significance of the beam profile in such measurements, and its impact when comparing results from different setups and groups across the world.
RESUMEN
Optogenetics is an emerging powerful tool to investigate workings of the nervous system. However, the use of low tissue penetrating visible light limits its therapeutic potential. Employing deep penetrating near-infrared (NIR) light for optogenetics would be beneficial but it cannot be used directly. This issue can be tackled with upconversion nanoparticles (UCNs) acting as nanotransducers emitting at shorter wavelengths extending to the UV range upon NIR light excitation. Although attractive, implementation of such NIR-optogenetics is hindered by the low UCN emission intensity that necessitates high NIR excitation intensities, resulting in overheating issues. A novel quasi-continuous wave (quasi-CW) excitation approach is developed that significantly enhances multiphoton emissions from UCNs, and for the first time NIR light-triggered optogenetic manipulations are implemented in vitro and in C. elegans. The approach developed here enables the activation of channelrhodopsin-2 with a significantly lower excitation power and UCN concentration along with negligible phototoxicity as seen with CW excitation, paving the way for therapeutic optogenetics.
Asunto(s)
Caenorhabditis elegans/metabolismo , Caenorhabditis elegans/efectos de la radiación , Rayos Infrarrojos , Nanopartículas/química , Optogenética/métodos , Animales , Channelrhodopsins , Fluorescencia , Células HEK293 , Humanos , Microscopía de Fluorescencia por Excitación Multifotónica , TermodinámicaRESUMEN
BACKGROUND: Newborn infants may have pulmonary disorders with abnormal gas distribution, e.g., respiratory distress syndrome. Pulmonary radiography is the clinical routine for diagnosis. Our aim was to investigate a novel noninvasive optical technique for rapid nonradiographic bedside detection of oxygen gas in the lungs of full-term newborn infants. METHODS: Laser spectroscopy was used to measure contents of oxygen gas (at 760 nm) and of water vapor (at 937 nm) in the lungs of 29 healthy newborn full-term infants (birth weight 2,900-3,900 g). The skin above the lungs was illuminated using two low-power diode lasers and diffusely emerging light was detected with a photodiode. RESULTS: Of the total 390 lung measurements performed, clear detection of oxygen gas was recorded in 60%, defined by a signal-to-noise ratio of >3. In all the 29 infants, oxygen was detected. Probe and detector positions for optimal pulmonary gas detection were determined. There were no differences in signal quality with respect to gender, body side or body weight. CONCLUSION: The ability to measure pulmonary oxygen content in healthy full-term neonates with this technique suggests that with further development, the method might be implemented in clinical practice for lung monitoring in neonatal intensive care.
Asunto(s)
Pulmón/metabolismo , Monitoreo Fisiológico , Oxígeno/metabolismo , Análisis Espectral/métodos , Humanos , Recién Nacido , Rayos LáserRESUMEN
Photon time-of-flight (PTOF) spectroscopy enables the estimation of absorption and reduced scattering coefficients of turbid media by measuring the propagation time of short light pulses through turbid medium. The present investigation provides a comparison of the assessed absorption and reduced scattering coefficients from PTOF measurements of intralipid 20% and India ink-based optical phantoms covering a wide range of optical properties relevant for biological tissues and dairy products. Three different models are used to obtain the optical properties by fitting to measured temporal profiles: the Liemert-Kienle model (LKM), the diffusion model (DM) and a white Monte-Carlo (WMC) simulation-based algorithm. For the infinite space geometry, a very good agreement is found between the LKM and WMC, while the results obtained by the DM differ, indicating that the LKM can provide accurate estimation of the optical parameters beyond the limits of the diffusion approximation in a computational effective and accurate manner. This result increases the potential range of applications for PTOF spectroscopy within industrial and biomedical applications.
RESUMEN
The spatial resolution of fluorescence molecular imaging is a critical issue for the success of the technique in biomedical applications. One important method for increasing the imaging resolution is to utilize multi-photon emissions. In this study, we thoroughly investigate the potential of the multi-photon upconversion emissions from rare-earth-doped upconverting nanoparticles for the improvement in spatial resolution of diffuse optical imaging. It is found that the imaging resolution is increased by a factor of 1.45 through employing two-photon upconversion emission compared with using the linear emission, and can be further elevated by a factor of 1.23 by using three-photon upconversion emission. In addition, we demonstrate that the pulsed excitation approach holds the promise of overcoming the low quantum yield associated with the high-order upconversion emissions.
RESUMEN
Diffuse reflectance spectroscopy (DRS) has been extensively studied in both preclinical and clinical settings for multiple applications, notably as a minimally invasive diagnostic tool for tissue identification and disease delineation. In this study, extended-wavelength DRS (EWDRS) measurements of ex vivo tissues ranging from ultraviolet through visible to the short-wave infrared region (355-1919 nm) are presented in two datasets. The first dataset contains labelled EWDRS measurements collected from bone cement samples and ovine specimens including 10 tissue types commonly encountered in orthopedic surgeries for data curation purposes. The other dataset includes labelled EWDRS measurements of primarily bone structures at different depths during stepwise drilling into intact porcine skulls until plunging into the cranial cavity. The raw data with code for pre-processing and calibration is publicly available for reuse on figshare. The datasets can be utilized not only for exploratory purposes in machine learning model construction, but also for knowledge discovery in the orthopedic domain to identify important features for surgical guidance, extract physiological parameters and provide diagnostic insights.
Asunto(s)
Huesos , Aprendizaje Automático , Animales , Ovinos , Análisis Espectral/métodos , Porcinos , Procedimientos OrtopédicosRESUMEN
As a rapidly growing field, biophotonics demonstrates an increasingly higher demand for interdisciplinary professionals and requires the implementation of a structured approach to educational and outreach activities focused on appropriate curriculum, and teaching and learning for audiences with diverse technical backgrounds and learning styles. Our study shows the main findings upon applying this approach to biophotonics workshops delivered 2 consecutive years while updating and improving learning outcomes, teaching strategies, workshop content based on student and teacher feedback. We provided resources for a variety of lecture-based, experimental, computer simulation activities. Quality of subject matter, teaching, and overall learning was rated as "Very good" or "Good" by 88%, 76%, and 82% of students in average, respectively. Application of our teaching strategies and materials during short- and long-term workshops/courses could potentially increase the interest in pursuing careers in the biophotonics field and related areas, leading to standardized approaches in designing education and outreach events across centers.
Asunto(s)
Aprendizaje , Estudiantes , Enseñanza , Humanos , Curriculum , DocentesRESUMEN
Breast cancer is the second leading cause of cancer death in women. Current clinical treatment stratification practices open up an avenue for significant improvements, potentially through advancements in immunohistochemistry (IHC) assessments of biopsies. We report a high contrast upconverting nanoparticles (UCNP) labeling to distinguish different levels of human epidermal growth factor receptor 2 (HER2) in HER2 control pellet arrays (CPAs) and HER2-positive breast cancer tissue. A simple Fourier transform algorithm trained on CPAs was sufficient to provide a semi-quantitative HER2 assessment tool for breast cancer tissues. The UCNP labeling had a signal-to-background ratio of 40 compared to the negative control.
RESUMEN
Phantoms simultaneously mimicking anatomical and optical properties of real tissues can play a pivotal role for improving dosimetry algorithms. The aim of the paper is to design and develop a hybrid phantom model that builds up on the strengths of solid and liquid phantoms for mimicking various anatomical structures for prostate cancer photodynamic therapy (PDT) dosimetry validation. The model comprises of a photosensitizer-embedded gelatin lesion within a liquid Intralipid prostate shape that is surrounded by a solid silicone outer shell. The hybrid phantom was well characterized for optical properties. The final assembled phantom was also evaluated for fluorescence tomographic reconstruction in conjunction with SpectraCure's IDOSE software. The developed model can lead to advancements in dosimetric evaluations. This would improve PDT outlook as a clinical treatment modality and boost phantom based standardization of biophotonic devices globally.
RESUMEN
Identification of tumour margins during resection of the brain is critical for improving the post-operative outcomes. Due to the highly infiltrative nature of glioblastoma multiforme (GBM) and limited intraoperative visualization of the tumour margin, incomplete surgical resection has been observed to occur in up to 80 % of GBM cases, leading to nearly universal tumour recurrence and overall poor prognosis of 14.6 months median survival. This research presents a miniaturized, SiPMT-based optical system for simultaneous measurement of powerful DRS and weak auto-fluorescence for brain tumour detection. The miniaturisation of the optical elements confined the spatial separation of eight select wavelengths into footprint measuring 1.5 × 2 × 16 mm. The small footprint enables this technology to be integrated with existing surgical guidance instruments in the operating room. It's dynamic ability to subtract any background illumination and measure signal intensities across a broad range from pW to mWs make this design much more suitable for clinical environments as compared to spectrometer-based systems with limited dynamic ranges and high integration times. Measurements using optical tissue phantoms containing mixed fluorophores demonstrate correlation coefficients between the fitted response and actual concentration using PLS regression being 0.95, 0.87 and 0.97 for NADH, FAD and PpIX , respectively. These promising results indicate that our proposed miniaturized instrument could serve as an effective alternative in operating rooms, assisting surgeons in identifying brain tumours to achieving positive surgical outcomes for patients.
RESUMEN
We present extended spectroscopic analysis of pharmaceutical tablets in the close near infrared spectral range performed using broadband photon time-of-flight (PTOF) absorption and scattering spectra measurements. We show that the absorption spectra can be used to perform evaluation of the chemical composition of pharmaceutical tablets without need for chemo-metric calibration. The spectroscopic analysis was performed using an advanced PTOF spectrometer operating in the 650 to 1400 nm spectral range. By employing temporal stabilization of the system we achieve the high precision of 0.5% required to evaluate the concentration of tablet ingredients. In order to further illustrate the performance of the system, we present the first ever reported broadband evaluation of absorption and scattering spectra from pure and doped Spectralon®.
RESUMEN
The editorial introduces the JBO Special Section on Selected Topics in Biophotonics: Translating Novel Photonics Technology into Clinical Applications.
Asunto(s)
Óptica y Fotónica , TecnologíaRESUMEN
Significance: The gas in scattering media absorption spectroscopy (GASMAS) technique has the potential for continuous, clinical monitoring of preterm infant lung function, removing the need for X-ray diagnosis and reliance on indirect and relatively slow measurement of blood oxygenation. Aim: We aim to determine the optimal source-detector configuration for reliable pathlength calculation and to estimate the oxygen gas concentration inside the lung cavities filled with humidified gas with four different oxygen gas concentrations ranging between 21% and 100%. Approach: Anthropomorphic optical phantoms of neonatal thorax with two different geometries were used to acquire GASMAS signals, for 30 source-detector configurations in transmittance and remittance geometry of phantoms in two sizes. Results: The results show that an internal light administration is more likely to provide a high GASMAS signal-to-noise ratio (SNR). In general, better SNRs were obtained with the smaller set of phantoms. The values of pathlength and O2 concentrations calculated with signals from the phantoms with optical properties at 820 nm exhibit higher variations than signals from the phantoms with optical properties at 764 nm. Conclusion: Our study shows that, by moving the source and detector over the thorax, most of the lung volumes can potentially be assessed using the GASMAS technique.
Asunto(s)
Recien Nacido Prematuro , Oxígeno , Recién Nacido , Humanos , Análisis Espectral/métodos , Fantasmas de Imagen , Gases , Pulmón/diagnóstico por imagen , Rayos LáserRESUMEN
Significance: Phantoms play a critical role in the development of biophotonics techniques. There is a lack of novel phantom tools in the emerging field of upconverting nanoparticles (UCNPs) for biophotonics application. This work provides a range of UCNP-based phantom tools and a manufacturing recipe to bridge the gap and accelerate the development of UCNP-based biophotonics applications. Aim: The study aims to provide a well-characterized UCNP-based solid phantom recipe and set of phantom tools to address a wide range of UCNP-based biophotonics applications. Approach: A solid phantom recipe based on silicone matrix was developed to manufacture UCNP-based phantoms. A lab built UCNP imaging system was used to characterize upconverted fluorescence emission of phantoms for linearity, homogeneity, and long-term stability. A photon time-of-flight spectroscopy technique was used to characterize the optical properties of the phantoms. Results: In total, 24 phantoms classified into 4 types, namely homogeneous, multilayer, inclusion, and base phantoms, were manufactured. The phantoms exhibit linear behavior over the dosage range of UCNPs. The phantoms were found to be stable over a limited observed period of 4 months with a coefficient of variation of < 4 % . The deep tissue imaging case showed that increasing the thickness of tissue reduced the UCNP emission. Conclusions: A first-of-its-kind UCNP-based solid phantom recipe was developed, and four types of UCNP phantom tools to explore biophotonics applications were presented. The UCNP phantoms exhibited a linear behavior with dosage and were stable over time. An example case showed the potential use of the phantom for deep tissue imaging applications. With recent advance in the use of UCNPs for biophotonics, we believe our recipe and tools will play a pivotal role in the growth of the UCNPs for biophotonics applications.
Asunto(s)
Nanopartículas , Nanopartículas/química , Fantasmas de Imagen , Diagnóstico por Imagen , Fotones , FluorescenciaRESUMEN
Significance: Wavelength selection from a large diffuse reflectance spectroscopy (DRS) dataset enables removal of spectral multicollinearity and thus leads to improved understanding of the feature domain. Feature selection (FS) frameworks are essential to discover the optimal wavelengths for tissue differentiation in DRS-based measurements, which can facilitate the development of compact multispectral optical systems with suitable illumination wavelengths for clinical translation. Aim: The aim was to develop an FS methodology to determine wavelengths with optimal discriminative power for orthopedic applications, while providing the frameworks for adaptation to other clinical scenarios. Approach: An ensemble framework for FS was developed, validated, and compared with frameworks incorporating conventional algorithms, including principal component analysis (PCA), linear discriminant analysis (LDA), and backward interval partial least squares (biPLS). Results: Via the one-versus-rest binary classification approach, a feature subset of 10 wavelengths was selected from each framework yielding comparable balanced accuracy scores (PCA: 94.8±3.47%, LDA: 98.2±2.02%, biPLS: 95.8±3.04%, and ensemble: 95.8±3.16%) to those of using all features (100%) for cortical bone versus the rest class labels. One hundred percent balanced accuracy scores were generated for bone cement versus the rest. Different feature subsets achieving similar outcomes could be identified due to spectral multicollinearity. Conclusions: Wavelength selection frameworks provide a means to explore domain knowledge and discover important contributors to classification in spectroscopy. The ensemble framework generated a model with improved interpretability and preserved physical interpretation, which serves as the basis to determine illumination wavelengths in optical instrumentation design.