Operando Scanning Electrochemical Probe Microscopy during Electrocatalysis.

Scanning electrochemical probe microscopy (SEPM) techniques can disclose the local electrochemical reactivity of interfaces in single-entity and sub-entity studies. Operando SEPM measurements consist of using a SEPM tip to investigate the performance of electrocatalysts, while the reactivity of the interface is simultaneously modulated. This powerful combination can correlate electrochemical activity with changes in surface properties, e.g., topography and structure, as well as provide insight into reaction mechanisms. The focus of this review is to reveal the recent progress in local SEPM measurements of the catalytic activity of a surface toward the reduction and evolution of O2 and H2 and electrochemical conversion of CO2. The capabilities of SEPMs are showcased, and the possibility of coupling other techniques to SEPMs is presented. Emphasis is given to scanning electrochemical microscopy (SECM), scanning ion conductance microscopy (SICM), electrochemical scanning tunneling microscopy (EC-STM), and scanning electrochemical cell microscopy (SECCM).

Tunable Syngas Formation at Industrially Relevant Current Densities via CO2 Electroreduction and Hydrogen Evolution over Ni and Fe-derived Catalysts obtained via One-Step Pyrolysis of Polybenzoxazine Based Composites.

Simultaneous electroreduction of CO2 and H2O to syngas can provide a sustainable feed for established processes used to synthesize carbon-based chemicals. The synthesis of MOx/M-N-Cs (M = Ni, Fe) electrocatalysts reported via one-step pyrolysis that shows increased performance during syngas electrosynthesis at high current densities with adaptable H2/CO ratios, e.g., for the Fischer-Tropsch process. When embedded in gas diffusion electrodes (GDEs) with optimized hydrophobicity, the NiOx/Ni-N-C catalyst produces syngas (H2/CO = 0.67) at -200 mA cm-2 while for the FeOx/Fe-N-C syngas production occurs at ≈-150 mA cm-2. By tuning the electrocatalyst's microenvironment, stable operation for >3 h at -200 mA cm-2 is achieved with the NiOx/Ni-N-C GDE. Post-electrolysis characterization revealed that the restructuring of the catalyst via reduction of NiOx to metallic Ni NPs still enables stable operation of the electrode at -200 mA cm-2, when embedded in an optimized microenvironment. The ionomer and additives used in the catalyst layer are important for the observed stable operation. Operando Raman measurements confirm the presence of NiOx during CO formation and indicate weak adsorption of CO on the catalyst surface.

Gas Diffusion Electrodes for Electrocatalytic Oxidation of Gaseous Ammonia: Stepping Over the Nitrogen Energy Canyon.

As ammonia continues to gain more and more interest as a promising hydrogen carrier compound, so does the electrochemical ammonia oxidation reaction (AmOR). To avoid the liberation of H2 in a reverse Haber-Bosch reaction under release of the energetically more favorable N2, we propose the oxidation of ammonia to value-added nitrite (NO2-), which is usually obtained during the Ostwald process. We investigated the anodic oxidation of gaseous ammonia directly supplied to a gas diffusion electrode (GDE) using a variety of compositionally different multi-metal catalysts coated on Ni foam under the simultaneous formation of H2 at the cathode. This will double the amount of H2 per ammonia molecule while applying a lower overpotential than that required for water electrolysis (1.4-1.8 V vs. RHE at 50 mA·cm-2). A selectivity study demonstrated that some of the catalyst compositions were able to produce significant amounts of NO2-, and further investigations using the most promising catalyst composition Nif_AlCoCrCuFe integrated within a GDE demonstrated up to 88% Faradaic efficiency for NO2- at the anode coupled to close to 100% Faradaic efficiency for the cathodic H2 production.

Crystal Plane-Related Oxygen-Evolution Activity of Single Hexagonal Co3 O4 Spinel Particles.

The electrocatalytic activity for the oxygen evolution reaction in alkaline electrolyte of hexagonal spinel Co3 O4 nanoparticles derived using scanning electrochemical cell microscopy (SECCM) is correlated with scanning electron microscopy and atomic force microscopy images of the droplet landing sites. A unique way to deconvolute the intrinsic catalytic activity of individual crystal facets of the hexagonal Co3 O4 spinel particle is demonstrated in terms of the turnover frequency (TOF) of surface Co atoms. The top surface exposing 111 crystal planes displayed a thickness-dependent TOF with a TOF of about 100 s-1 at a potential of 1.8 V vs. RHE and a particle thickness of 100 nm. The edge of the particle exposing (110) planes, however, showed an average TOF of 270±68 s-1 at 1.8 V vs. RHE and no correlation with particle thickness. The higher atomic density of Co atoms on the edge surface (2.5 times of the top) renders the overall catalytic activity of the edge planes significantly higher than that of the top planes. The use of a free-diffusing Os complex in the alkaline electrolyte revealed the low electrical conductivity through individual particles, which explains the thickness-dependent TOF of the top planes and could be a reason for the low activity of the top (111) planes.

Spray-Flame Synthesis of LaFexCo1-xO3 (x = 0.2, 0.3) Perovskite Nanoparticles for Oxygen Evolution Reaction in Water Splitting: Effect of Precursor Chemistry (Acetates and Nitrates).

The product properties of mixed oxide nanoparticles generated via spray-flame synthesis depend on an intricate interplay of solvent and precursor chemistries in the processed solution. The effect of two different sets of metal precursors, acetates and nitrates, dissolved in a mixture of ethanol (35 Vol.%) and 2-ethylhexanoic acid (2-EHA, 65 Vol.%) was investigated for the synthesis of LaFexCo1-xO3 (x = 0.2, 0.3) perovskites. Regardless of the set of precursors, similar particle-size distributions (dp = 8-11 nm) were obtained and a few particles with sizes above 20 nm were identified with transmission electron microscopy (TEM) measurements. Using acetates as precursors, inhomogeneous La, Fe, and Co elemental distributions were obtained for all particle sizes according to energy dispersive X-ray (EDX) mappings, connected to the formation of multiple secondary phases such as oxygen-deficient La3(FexCo1-x)3O8 brownmillerite or La4(FexCo1-x)3O10 Ruddlesden-Popper (RP) structures besides the main trigonal perovskite phase. For samples synthesized from nitrates, inhomogeneous elemental distributions were observed for large particles only where La and Fe enrichment occurred in combination with the formation of a secondary La2(FexCo1-x)O4 RP phase. Such variations can be attributed to reactions in the solution prior to injection in the flame as well as precursor-dependent variations in in-flame reactions. Therefore, the precursor solutions were analyzed by temperature-dependent attenuated total reflection Fourier-transform infrared (ATR-FTIR) measurements. The acetate-based precursor solutions indicated the partial conversion of, mainly La and Fe, acetates to metal 2-ethylhexanoates. In the nitrate-based solutions, esterification of ethanol and 2-EHA played the most important role. The synthesized nanoparticle samples were characterized by BET (Brunauer, Emmett, Teller), FTIR, Mössbauer, and X-ray photoelectron spectroscopy (XPS). All samples were tested as oxygen evolution reaction (OER) catalysts, and similar electrocatalytic activities were recorded when evaluating the potential required to reach 10 mA/cm2 current density (∼1.61 V vs reversible hydrogen electrode (RHE)).

Acidic Hydrogen Evolution Electrocatalysis at High-Entropy Alloys Correlates with its Composition-Dependent Potential of Zero Charge.

The vast possibilities in the elemental combinations of high-entropy alloys (HEAs) make it essential to discover activity descriptors for establishing rational electrocatalyst design principles. Despite the increasing attention on the potential of zero charge (PZC) of hydrogen evolution reaction (HER) electrocatalyst, neither the PZC of HEAs nor the impact of the PZC on the HER activity at HEAs has been described. Here, we use scanning electrochemical cell microscopy (SECCM) to determine the PZC and the HER activities of various elemental compositions of a Pt-Pd-Ru-Ir-Ag thin-film HEA materials library (HEA-ML) with high statistical reliability. Interestingly, the PZC of Pt-Pd-Ru-Ir-Ag is linearly correlated with its composition-weighted average work function. The HER current density in acidic media positively correlates with the PZC, which can be explained by the preconcentration of H+ in the electrical double layer at potentials negative of the PZC.

Redox Replacement of Silver on MOF-Derived Cu/C Nanoparticles on Gas Diffusion Electrodes for Electrocatalytic CO2 Reduction.

Bimetallic tandem catalysts have emerged as a promising strategy to locally increase the CO flux during electrochemical CO2 reduction, so as to maximize the rate of conversion to C-C-coupled products. Considering this, a novel Cu/C-Ag nanostructured catalyst has been prepared by a redox replacement process, in which the ratio of the two metals can be tuned by the replacement time. An optimum Cu/Ag composition with similarly sized particles showed the highest CO2 conversion to C2+ products compared to non-Ag-modified gas-diffusion electrodes. Gas chromatography and in-situ Raman measurements in a CO2 gas diffusion cell suggest the formation of top-bound linear adsorbed *CO followed by consumption of CO in the successive cascade steps, as evidenced by the increasingνC-H bands. These findings suggest that two mechanisms operate simultaneously towards the production of HCO2 H and C-C-coupled products on the Cu/Ag bimetallic surface.

The Effect of Interlayer Anion Grafting on Water Oxidation Electrocatalysis: A Comparative Study of Ni- and Co-Based Brucite-Type Layered Hydroxides, Layered Double Hydroxides and Hydroxynitrate Salts.

The urge for carbon-neutral green energy conversion and storage technologies has invoked the resurgence of interest in applying brucite-type materials as low-cost oxygen evolution reaction (OER) electrocatalysts in basic media. Transition metal layered hydroxides belonging to the brucite-type structure family have been shown to display remarkable electrochemical activity. Recent studies on the earth-abundant Fe3+ containing mössbauerite and Fe3+ rich Co-Fe layered oxyhydroxide carbonates have suggested that grafted interlayer anions might play a key role in OER catalysis. To probe the effect of such interlayer anion grafting in brucite-like layered hydroxides, we report here a systematic study on the electrocatalytic performance of three distinct Ni and Co brucite-type layered structures, namely, (i) brucite-type M(OH)2 without any interlayer anions, (ii) LDHs with free interlayer anions, and (iii) hydroxynitrate salts with grafted interlayer anions. The electrochemical results indeed show that grafting has an evident impact on the electronic structure and the observed OER activity. Ni- and Co-hydroxynitrate salts with grafted anions display notably earlier formations of the electrocatalytically active species. Particularly Co-hydroxynitrate salts exhibit lower overpotentials at 10 mA cm-2 (η=0.34 V) and medium current densities of 100 mA cm-2 (η=0.40 V) compared to the corresponding brucite-type hydroxides and LDH materials.

Single Particle Nanoelectrochemistry Reveals the Catalytic Oxygen Evolution Reaction Activity of Co3 O4 Nanocubes.

Co3 O4 nanocubes are evaluated concerning their intrinsic electrocatalytic activity towards the oxygen evolution reaction (OER) by means of single-entity electrochemistry. Scanning electrochemical cell microscopy (SECCM) provides data on the electrocatalytic OER activity from several individual measurement areas covering one Co3 O4 nanocube of a comparatively high number of individual particles with sufficient statistical reproducibility. Single-particle-on-nanoelectrode measurements of Co3 O4 nanocubes provide an accelerated stress test at highly alkaline conditions with current densities of up to 5.5 A cm-2 , and allows to derive TOF values of up to 2.8×104  s-1 at 1.92 V vs. RHE for surface Co atoms of a single cubic nanoparticle. Obtaining such high current densities combined with identical-location transmission electron microscopy allows monitoring the formation of an oxy(hydroxide) surface layer during electrocatalysis. Combining two independent single-entity electrochemistry techniques provides the basis for elucidating structure-activity relations of single electrocatalyst nanoparticles with well-defined surface structure.

B-Cu-Zn Gas Diffusion Electrodes for CO2 Electroreduction to C2+ †Products at High Current Densities.

Electroreduction of CO2 to multi-carbon products has attracted considerable attention as it provides an avenue to high-density renewable energy storage. However, the selectivity and stability under high current densities are rarely reported. Herein, B-doped Cu (B-Cu) and B-Cu-Zn gas diffusion electrodes (GDE) were developed for highly selective and stable CO2 conversion to C2+  products at industrially relevant current densities. The B-Cu GDE exhibited a high Faradaic efficiency of 79 % for C2+  products formation at a current density of -200 mA cm-2 and a potential of -0.45 V vs. RHE. The long-term stability for C2+ formation was substantially improved by incorporating an optimal amount of Zn. Operando Raman spectra confirm the retained Cu+ species under CO2 reduction conditions and the lower overpotential for *OCO formation upon incorporation of Zn, which lead to the excellent conversion of CO2 to C2+ products on B-Cu-Zn GDEs.

A Metal-Organic Framework derived Cux Oy Cz Catalyst for Electrochemical CO2 Reduction and Impact of Local pH Change.

Developing highly efficient and selective electrocatalysts for the CO2 reduction reaction to produce value-added chemicals has been intensively pursued. We report a series of Cux Oy Cz nanostructured electrocatalysts derived from a Cu-based MOF as porous self-sacrificial template. Blending catalysts with polytetrafluoroethylene (PTFE) on gas diffusion electrodes (GDEs) suppressed the competitive hydrogen evolution reaction. 25 to 50 wt % teflonized GDEs exhibited a Faradaic efficiency of ≈54 % for C2+ products at -80 mA cm-2 . The local OH- ions activity of PTFE-modified GDEs was assessed by means of closely positioning a Pt-nanoelectrode. A substantial increase in the OH- /H2 O activity ratio due to the locally generated OH- ions at increasing current densities was determined irrespective of the PTFE amount.

Needle-type organic electrochemical transistor for spatially resolved detection of dopamine.

In this work, the advantages of carbon nanoelectrodes (CNEs) and orgonic electrochemical transistors (OECTs) were merged to realise nanometre-sized, spearhead OECTs based on single- and double-barrel CNEs functionalised with a conducting polymer film. The needle-type OECT shows a high aspect ratio that allows its precise positioning by means of a macroscopic handle and its size is compatible with single-cell analysis. The device was characterised with respect to its electrolyte-gated behaviour and was employed as electrochemical sensor for the proof-of-concept detection of dopamine (DA) over a wide concentration range (10-12-10-6 M). Upon application of fixed drain and gate voltages (Vd = - 0.3 V, Vg = - 0.9 V, respectively), the nano-sized needle-type OECT sensor exhibited a linear response in the low pM range and from 0.002 to 7 µM DA, with a detection limit of 1 × 10-12 M. Graphical abstract.

Electrocatalysis as the Nexus for Sustainable Renewable Energy: The Gordian Knot of Activity, Stability, and Selectivity.

The use of renewable energy by means of electrochemical techniques by converting H2 O, CO2 and N2 into chemical energy sources and raw materials, is the basis for securing a future sustainable "green" energy supply. Some weaknesses and inconsistencies in the practice of determining the electrocatalytic performance, which prevents a rational bottom-up catalyst design, are discussed. Large discrepancies in material properties as well as in electrocatalytic activity and stability become obvious when materials are tested under the conditions of their intended use as opposed to the usual laboratory conditions. They advocate for uniform activity/stability correlations under application-relevant conditions, and the need for a clear representation of electrocatalytic performance by contextualization in terms of functional investigation or progress towards application is emphasized.

A Universal Nano-capillary Based Method of Catalyst Immobilization for Liquid-Cell Transmission Electron Microscopy.

A universal nano-capillary based method for sample deposition on the silicon nitride membrane of liquid-cell transmission electron microscopy (LCTEM) chips is demonstrated. It is applicable to all substances which can be dispersed in a solvent and are suitable for drop casting, including catalysts, biological samples, and polymers. Most importantly, this method overcomes limitations concerning sample immobilization due to the fragility of the ultra-thin silicon nitride membrane required for electron transmission. Thus, a straightforward way is presented to widen the research area of LCTEM to encompass any sample which can be externally deposited beforehand. Using this method, Nix B nanoparticles are deposited on the µm-scale working electrode of the LCTEM chip and in situ observation of single catalyst particles during ethanol oxidation is for the first time successfully monitored by means of TEM movies.

Cascade Reactions in Nanozymes: Spatially Separated Active Sites inside Ag-Core-Porous-Cu-Shell Nanoparticles for Multistep Carbon Dioxide Reduction to Higher Organic Molecules.

Enzymes can perform complex multistep cascade reactions by linking multiple distinct catalytic sites via substrate channeling. We mimic this feature in a generalized approach with an electrocatalytic nanoparticle for the carbon dioxide reduction reaction comprising a Ag core surrounded by a porous Cu shell, providing different active sites in nanoconfined volumes. The architecture of the nanozyme provides the basis for a cascade reaction, which promotes C-C coupling reactions. The first step occurs on the Ag core, and the subsequent steps on the porous copper shell, where a sufficiently high CO concentration due to the nanoconfinement facilitates C-C bond formation. The architecture yields the formation of n-propanol and propionaldehyde at potentials as low as -0.6 V vs RHE.

Operando Thin-Layer ATR-FTIR Spectroelectrochemical Radial Flow Cell with Tilt Correction and Borehole Electrode.

A novel spectroelectrochemical ATR-FTIR thin-film cell was designed and applied to elucidate the intermediates during electrocatalytic alcohol oxidation. In the novel cell design, the working electrode is positioned coplanar above the internal reflection element (IRE) to ensure uniform electrolyte film thickness at reaction conditions. The depletion of the reactant (i.e., ethanol or ethylene glycol in the case of electrocatalytic alcohol oxidation) is decreased by a specifically designed flow-through glassy carbon borehole electrode embedded in PEEK. The electrolyte can be pumped through the disk-shaped gap between the ring working electrode and the IRE into the borehole via an external peristaltic pump. To ensure a radially uniform electrolyte flow, the working electrode and the internal reflection element need to be aligned in parallel at a well-controlled distance, which was achieved by a three-microelectrode-assisted tilt correction. Tilt correction of this four-electrode ensemble and the IRE was performed by three step-motor-driven micrometer screws that allow adjustment of the electrode orientation. The effect of electrolyte pumping through the borehole electrode was analyzed by performing anodic ethanol oxidation using nickel boride as electrocatalyst. The applicability, reliability, and functionality of the cell was further assessed by oxidizing ethylene glycol and determining the reaction products as a function of the electrolyte flow rate. It is found to be essential to induce forced electrolyte convection into the thin electrolyte layer to achieve well-defined steady-state conditions, as mass transport by diffusion is by far insufficient, resulting in reactant depletion, product accumulation, and local pH changes.

On the Theory of Electrolytic Dissociation, the Greenhouse Effect, and Activation Energy in (Electro)Catalysis: A Tribute to Svante Augustus Arrhenius.

Svante Augustus Arrhenius (1859, Vik - 1927, Stockholm) received the Nobel Prize for Chemistry in 1903 "in recognition of the extraordinary services he rendered to the advancement of chemistry by his electrolytic theory of dissociation". Arrhenius was a physicist, and he received his PhD from the University of Uppsala, where he later became a professor for phyiscal chemistry, the first in the country for this subject. He was offered several positions as professor abroad, but decided to remain in Sweden and to build a Nobel Institute for physical chemistry using the Nobel funds. He remained director of the Institute until his death. There are powerful lessons to take from Svante August Arrhenius' journey leading to a Nobel laureate as there are from his tremendous contributions to chemistry and science in general, including climate science, immunochemistry and cosmology. The theory of electrolytic dissociation for which Arrhenius received the 1903 Nobel Prize in Chemistry has had a profound impact on our understanding of the chemistry of solutions, chemical reactivity, mechanisms underlying chemical transformations as well as physiological processes. As a tribute to Arrhenius, we present a brief historical perspective and present status of the theory of electrolytic dissociation, its relevance and role to the development of electrochemistry, as well as some perspectives on the possible role of the theory to future advancements in electroanalysis, electrocatalysis and electrochemical energy storage. The review briefly highlights Arrhenius' contribution to climate science owing to his studies on the potential effects of increased anthropogenic CO2 emissions on the global climate. These studies were far ahead of their time and revealed a daunting global dilemma, global warming, that we are faced with today. Efforts to abate or reverse CO2 accumulation constitute one of the most pressing scientific problems of our time, "man's urgent strive to save self from the adverse effects of his self-orchestrated change on the climate". Finally, we review the application of the Arrhenius equation that correlates reaction rate constants (k) and temperature (T); k = A e ( - E a / R T ) , in determining reaction barriers in catalysis with a particular focus on recent modifications of the equation to account for reactions exhibiting non-linear Arrhenius behavior with concave curvature due to prevalence of quantum mechanical tunneling, as well as infrequent convexity of Arrhenius plots due to decrease of the microcanonical rate coefficient with energy as observed for some enzyme catalyzed reactions.

Enhancing Electrocatalytic Activity through Liquid-Phase Exfoliation of NiFe Layered Double Hydroxide Intercalated with Metal Phthalocyanines in the Presence of Graphene.

Earth-abundant transition-metal-based catalysts are attractive for alkaline water electrolysis. However, their catalytic properties are often limited by their poor electrical conductivity. Here, we present a strategy for enhancing the electrical conductivity of NiFe layered double hydroxide (LDH) in order to further improve its properties as an electrocatalyst for the oxygen evolution reaction (OER) in alkaline media. We show that NiFe LDH containing metal tetrasulfonate phthalocyanine in the interlayers between the NiFe oxide galleries can be coupled with graphene during liquid-phase exfoliation by taking advantage of their π-π stacking capabilities. A substantial enhancement in the electrocatalytic activity of NiFe LDH with respect to the OER was observed. Moreover, the activity and selectivity of the catalyst materials towards the oxygen reduction reaction were investigated, demonstrating that both the metal hydroxide layer and the interlayer species contribute to the electrocatalytic performance of the composite material.

Scanning Electrochemical Cell Microscopy Investigation of Single ZIF-Derived Nanocomposite Particles as Electrocatalysts for Oxygen Evolution in Alkaline Media.

"Single entity" measurements are central for an improved understanding of the function of nanoparticle-based electrocatalysts without interference arising from mass transfer limitations and local changes of educt concentration or the pH value. We report a scanning electrochemical cell microscopy (SECCM) investigation of zeolitic imidazolate framework (ZIF-67)-derived Co-N-doped C composite particles with respect to the oxygen evolution reaction (OER). Surmounting the surface wetting issues as well as the potential drift through the use of a non-interfering Os complex as free-diffusing internal redox potential standard, SECCM could be successfully applied in alkaline media. SECCM mapping reveals activity differences relative to the number of particles in the wetted area of the droplet landing zone. The turnover frequency (TOF) is 0.25 to 1.5 s-1 at potentials between 1.7 and 1.8 V vs. RHE, respectively, based on the number of Co atoms in each particle. Consistent values at locations with varying number of particles demonstrates OER performance devoid of macroscopic film effects.

Oxygen Evolution Electrocatalysis of a Single MOF-Derived Composite Nanoparticle on the Tip of a Nanoelectrode.

Determination of the intrinsic electrocatalytic activity of nanomaterials by means of macroelectrode techniques is compromised by ensemble and film effects. Here, a unique "particle on a stick" approach is used to grow a single metal-organic framework (MOF; ZIF-67) nanoparticle on a nanoelectrode surface which is pyrolyzed to generate a cobalt/nitrogen-doped carbon (CoN/C) composite nanoparticle that exhibits very high catalytic activity towards the oxygen evolution reaction (OER) with a current density of up to 230 mA cm-2 at 1.77 V (vs. RHE), and a high turnover frequency (TOF) of 29.7 s-1 at 540 mV overpotential. Identical location transmission electron microscopy (IL-TEM) analysis substantiates the "self-sacrificial" template nature of the MOF, while post-electrocatalysis studies reveal agglomeration of Co centers within the CoN/C composite during the OER. "Single-entity" electrochemical analysis allows for deriving the intrinsic electrocatalytic activity and furnishes insight into the transient behavior of the electrocatalyst under reaction conditions.