Transparent and flexible high-performance supercapacitors based on single-walled carbon nanotube films.

Transparent and flexible energy storage devices have garnered great interest due to their suitability for display, sensor and photovoltaic applications. In this paper, we report the application of aerosol synthesized and dry deposited single-walled carbon nanotube (SWCNT) thin films as electrodes for an electrochemical double-layer capacitor (EDLC). SWCNT films exhibit extremely large specific capacitance (178 F g(-1) or 552 µF cm(-2)), high optical transparency (92%) and stability for 10 000 charge/discharge cycles. A transparent and flexible EDLC prototype is constructed with a polyethylene casing and a gel electrolyte.

Coronene encapsulation in single-walled carbon nanotubes: stacked columns, peapods, and nanoribbons.

Encapsulation of coronene inside single-walled carbon nanotubes (SWNTs) was studied under various conditions. Under high vacuum, two main types of molecular encapsulation were observed by using transmission electron microscopy: coronene dimers and molecular stacking columns perpendicular or tilted (45-60°) with regard to the axis of the SWNTs. A relatively small number of short nanoribbons or polymerized coronene molecular chains were observed. However, experiments performed under an argon atmosphere (0.17 MPa) revealed reactions between the coronene molecules and the formation of hydrogen-terminated graphene nanoribbons. It was also observed that the morphology of the encapsulated products depend on the diameter of the SWNTs. The experimental results are explained by using density functional theory calculations through the energies of the coronene molecules inside the SWNTs, which depend on the orientation of the molecules and the diameter of the tubes.

Synthesis of graphene nanoribbons encapsulated in single-walled carbon nanotubes.

A novel material, graphene nanoribbons encapsulated in single-walled carbon nanotubes (GNR@SWNT), was synthesized using confined polymerization and fusion of polycyclic aromatic hydrocarbon (PAH) molecules. Formation of the GNR is possible due to confinement effects provided by the one-dimensional space inside nanotubes, which helps to align coronene or perylene molecules edge to edge to achieve dimerization and oligomerization of the molecules into long nanoribbons. Almost 100% filling of SWNT with GNR is achieved while nanoribbon length is limited only by the length of the encapsulating nanotube. The PAH fusion reaction provides a very simple and easily scalable method to synthesize GNR@SWNT in macroscopic amounts. First-principle simulations indicate that encapsulation of the GNRs is energetically favorable and that the electronic structure of the encapsulated GNRs is the same as for the free-standing ones, pointing to possible applications of the GNR@SWNT structures in photonics and nanoelectronics.

Wavelength-dependent photoconductivity of single-walled carbon nanotube layers.

A number of electronic devices such as phase shifters, polarizers, modulators, and power splitters are based on tunable materials. These materials often do not meet all the requirements namely low losses, fast response time, and technological compatibility. Novel nanomaterials, such as single-walled carbon nanotubes, are therefore widely studied to fill this technological gap. Here we show how the dielectric constant of single-walled carbon nanotube layers can be substantially modified by illuminating them due to unique light-matter interactions. We relate the optical excitation of the nanotube layers to the illumination wavelength and intensity, by resistance and capacitance measurements. The dielectric constant is modified under laser illumination due to the change of material polarization and free carrier generation, and is shown to not be temperature-related. The findings indicate that SWCNT layers are a prospective tunable optoelectronic material for both high and low frequency applications.

Freeze-Dried Carbon Nanotube Aerogels for High-Frequency Absorber Applications.

A novel technique for millimeter wave absorber material embedded in a metal waveguide is proposed. The absorber material is a highly porous carbon nanotube (CNT) aerogel prepared by a freeze-drying technique. CNT aerogel structures are shown to be good absorbers with a low reflection coefficient, less than -12 dB at 95 GHz. The reflection coefficient of the novel absorber is 3-4 times lower than that of commercial absorbers with identical geometry. Samples prepared by freeze-drying at -25 °C demonstrate resonance behavior, while those prepared at liquid nitrogen temperature (-196 °C) exhibit a significant decrease in reflection coefficient, with no resonant behavior. CNT absorbers of identical volume based on wet-phase drying preparation show significantly worse performance than the CNT aerogel absorbers prepared by freeze-drying. Treatment of the freeze-dried CNT aerogel with n- and p-dopants (monoethanolamine and iodine vapors, respectively) shows remarkable improvement in the performance of the waveguide embedded absorbers, reducing the reflection coefficient by 2 dB across the band.

Optically controlled dielectric properties of single-walled carbon nanotubes for terahertz wave applications.

Materials with tunable dielectric properties are valuable for a wide range of electronic devices, but are often lossy at terahertz frequencies. Here we experimentally report the tuning of the dielectric properties of single-walled carbon nanotubes under light illumination. The effect is demonstrated by measurements of impedance variations at low frequency as well as complex dielectric constant variations in the wide frequency range of 0.1-1 THz by time domain spectroscopy. We show that the dielectric constant is significantly modified for varying light intensities. The effect is also practically applied to phase shifters based on dielectric rod waveguides, loaded with carbon nanotube layers. The carbon nanotubes are used as tunable impedance surface controlled by light illumination, in the frequency range of 75-500 GHz. These results suggest that the effect of dielectric constant tuning with light, accompanied by low transmission losses of the carbon nanotube layer in such an ultra-wide band, may open up new directions for the design and fabrication of novel Terahertz and optoelectronic devices.

Electrical behaviour of native cellulose nanofibril/carbon nanotube hybrid aerogels under cyclic compression.

Hybrid aerogels consisting of cellulose nanofibers (CNF) and modified few-walled carbon nanotubes (FWCNT) are investigated under cyclic mechanical compression to explore "electrical fatigue". For this purpose the FWCNTs were hydrophilized, thus promoting their aqueous dispersibility to allow FWCNT/CNF hybrid hydrogels, followed by freeze-drying to obtain hybrid aerogels. The optimized composition consisting of FWCNT/CNF 20/80 wt/wt showed conductivity of 10-5 S cm-1 as promoted due to double percolation, and showed only small changes in electrical and mechanical behaviour upon cycling 100 times. The electrical behaviour under cycled compression shows good stability and reversibility.

Hydrogen-Driven Cage Unzipping of C60 into Nano-Graphenes.

Annealing of C60 in hydrogen at temperatures above the stability limit of C-H bonds in C60H x (500-550 °C) is found to result in direct collapse of the cage structure, evaporation of light hydrocarbons, and formation of solid mixture composed of larger hydrocarbons and few-layered graphene sheets. Only a minor part of this mixture is soluble; this was analyzed using matrix-assisted laser desorption/ionization MS, Fourier transform infrared (FTIR), and nuclear magnetic resonance spectroscopy and found to be a rather complex mixture of hydrocarbon molecules composed of at least tens of different compounds. The sequence of most abundant peaks observed in MS, which corresponds to C2H2 mass difference, suggests a stepwise breakup of the fullerene cage into progressively smaller molecular fragments edge-terminated by hydrogen. A simple model of hydrogen-driven C60 unzipping is proposed to explain the observed sequence of fragmentation products. The insoluble part of the product mixture consists of large planar polycyclic aromatic hydrocarbons, as evidenced by FTIR and Raman spectroscopy, and some larger sheets composed of few-layered graphene, as observed by transmission electron microscopy. Hydrogen annealing of C60 thin films showed a thickness-dependent results with reaction products significantly different for the thinnest films compared to bulk powders. Hydrogen annealing of C60 films with the thickness below 10 nm was found to result in formation of nanosized islands with Raman spectra very similar to the spectra of coronene oligomers and conductivity typical for graphene.

Modifying native nanocellulose aerogels with carbon nanotubes for mechanoresponsive conductivity and pressure sensing.

Mechanically excellent native cellulose nanofibers that are cleaved from plant cell walls have been modified by functionalized few-walled carbon nanotubes for hybrid nanofiber/nanotube aerogels. They show elastic mechanical behavior in combination with reversible electrical response under compression allowing responsive conductivity and pressure sensing. The concept combines wide availability of nanocellulosics and electrical functionality of carbon nanotubes synergistically.

Optical properties of graphene nanoribbons encapsulated in single-walled carbon nanotubes.

We report the photoluminescence (PL) from graphene nanoribbons (GNRs) encapsulated in single-walled carbon nanotubes (SWCNTs). New PL spectral features originating from GNRs have been detected in the visible spectral range. PL peaks from GNRs have resonant character, and their positions depend on the ribbon geometrical structure in accordance with the theoretical predictions. GNRs were synthesized using confined polymerization and fusion of coronene molecules. GNR@SWCNTs material demonstrates a bright photoluminescence both in infrared (IR) and visible regions. The photoluminescence excitation mapping in the near-IR spectral range has revealed the geometry-dependent shifts of the SWCNT peaks (up to 11 meV in excitation and emission) after the process of polymerization of coronene molecules inside the nanotubes. This behavior has been attributed to the strain of SWCNTs induced by insertion of the coronene molecules.

Chiral-selective growth of single-walled carbon nanotubes on lattice-mismatched epitaxial cobalt nanoparticles.

Controlling chirality in growth of single-walled carbon nanotubes (SWNTs) is important for exploiting their practical applications. For long it has been conceptually conceived that the structural control of SWNTs is potentially achievable by fabricating nanoparticle catalysts with proper structures on crystalline substrates via epitaxial growth techniques. Here, we have accomplished epitaxial formation of monometallic Co nanoparticles with well-defined crystal structure, and its use as a catalyst in the selective growth of SWNTs. Dynamics of Co nanoparticles formation and SWNT growth inside an atomic-resolution environmental transmission electron microscope at a low CO pressure was recorded. We achieved highly preferential growth of semiconducting SWNTs (~90%) with an exceptionally large population of (6, 5) tubes (53%) in an ambient CO atmosphere. Particularly, we also demonstrated high enrichment in (7, 6) and (9, 4) at a low growth temperature. These findings open new perspectives both for structural control of SWNTs and for elucidating the growth mechanisms.

Hydrogenation, purification, and unzipping of carbon nanotubes by reaction with molecular hydrogen: road to graphane nanoribbons.

Reaction of single-walled carbon nanotubes (SWNTs) with hydrogen gas was studied in a temperature interval of 400-550 °C and at hydrogen pressure of 50 bar. Hydrogenation of nanotubes was observed for samples treated at 400-450 °C with about 1/3 of carbon atoms forming covalent C-H bonds, whereas hydrogen treatment at higher temperatures (550 °C) occurs as an etching. Unzipping of some SWNTs into graphene nanoribbons is observed as a result of hydrogenation at 400-550 °C. Annealing in hydrogen gas at elevated conditions for prolonged periods of time (72 h) is demonstrated to result also in nanotube opening, purification of nanotubes from amorphous carbon, and removal of carbon coatings from Fe catalyst particles, which allows their complete elimination by acid treatment.