Melanin granules morphology and distribution in human black hair investigated by focused ion beam scanning electron microscopy: Differences between Asian and Caucasian hair.

Melanin granules (melanosomes) in Asian and Caucasian black hairs were investigated by focused ion beam scanning electron microscopy (FIB-SEM). This technique facilitates a direct evaluation of the three-dimensional distribution and morphology of melanin granules without requiring their isolation from hair. Three-dimensional reconstructed images of melanin granule distribution in hair samples were obtained using serial SEM images observed by FIB-SEM. Melanin granules in black hair tended to be three-dimensionally dense in the outer periphery of the cortex. The morphometric parameters of melanin granules were calculated using the reconstructed three-dimensional images. The results confirmed that melanin granules in Caucasian black hair were much smaller those in Asian black hair. Moreover, it was indicated that the relative frequency distribution of the volume of melanin granules was significantly different between Asians and Caucasians.

Quantum de-trapping and transport of heavy defects in tungsten.

The diffusion of defects in crystalline materials1 controls macroscopic behaviour of a wide range of processes, including alloying, precipitation, phase transformation and creep2. In real materials, intrinsic defects are unavoidably bound to static trapping centres such as impurity atoms, meaning that their diffusion is dominated by de-trapping processes. It is generally believed that de-trapping occurs only by thermal activation. Here, we report the direct observation of the quantum de-trapping of defects below around one-third of the Debye temperature. We successfully monitored the de-trapping and migration of self-interstitial atom clusters, strongly trapped by impurity atoms in tungsten, by triggering de-trapping out of equilibrium at cryogenic temperatures, using high-energy electron irradiation and in situ transmission electron microscopy. The quantum-assisted de-trapping leads to low-temperature diffusion rates orders of magnitude higher than a naive classical estimate suggests. Our analysis shows that this phenomenon is generic to any crystalline material.

Three-dimensional ultrastructural change of chloroplasts in rice mesophyll cells responding to salt stress.

BACKGROUND AND AIMS: Excess salinity inhibits the metabolism of various systems and induces structural changes, especially in chloroplasts. Although the chloroplast body seems to swell under salinity stress as observed by conventional transmission electron microscopy, previous studies are limited to 2-D data and lack quantitative comparisons because specimens need to be sliced into ultrathin sections. This study shows three-dimensionally the structural changes in a whole mesophyll cell responding to salinity stress by serial sectioning with a focused ion beam scanning electron microscope (FIB-SEM) and compares the differences in chloroplast structures based on reconstructed models possessing accurate numerical voxel values. METHODS: Leaf blades of rice plants treated with 100 mm NaCl or without (control) for 4 d were fixed chemically and embedded in resin. The specimen blocks were sectioned and observed using the FIB-SEM, and then the sliced image stacks were reconstructed into 3-D models by image processing software. KEY RESULTS: On the transverse sections of rice mesophyll cells, the chloroplasts in the control leaves appeared to be elongated meniscus lens shaped, while those in the salt-treated leaves appear to be expanded oval shaped. The 3-D models based on serial sectioning images showed that the chloroplasts in the control cells spread like sheets fitted to the shape of the cell wall and in close contact with the adjacent chloroplasts. In contrast, those in the salt-stressed cells curled up into a ball and fitted to cell protuberances without being in close contact with adjacent chloroplasts. Although the shapes of chloroplasts were clearly different between the two treatments, their volumes did not differ. CONCLUSIONS: The 3-D reconstructed models of whole rice mesophyll cells indicated that chloroplasts under salt stress conditions were not swollen but became spherical without increasing their volume. This is in contrast to findings of previous studies based on 2-D images.

Progress in environmental high-voltage transmission electron microscopy for nanomaterials.

A new environmental high-voltage transmission electron microscope (E-HVEM) was developed by Nagoya University in collaboration with JEOL Ltd. An open-type environmental cell was employed to enable in-situ observations of chemical reactions on catalyst particles as well as mechanical deformation in gaseous conditions. One of the reasons for success was the application of high-voltage transmission electron microscopy to environmental (in-situ) observations in the gas atmosphere because of high transmission of electrons through gas layers and thick samples. Knock-on damages to samples by high-energy electrons were carefully considered. In this paper, we describe the detailed design of the E-HVEM, recent developments and various applications. This article is part of a discussion meeting issue 'Dynamic in situ microscopy relating structure and function'.

Morphological process of podocyte development revealed by block-face scanning electron microscopy.

Podocytes present a unique 3D architecture specialized for glomerular filtration. However, several 3D morphological aspects on podocyte development remain partially understood because they are difficult to reveal using conventional scanning electron microscopy (SEM). Here, we adopted serial block-face SEM imaging, a powerful tool for analyzing the 3D cellular ultrastructure, to precisely reveal the morphological process of podocyte development, such as the formation of foot processes. Development of foot processes gives rise to three morphological states: the primitive, immature and mature foot processes. Immature podocytes were columnar in shape and connected to each other by the junctional complex, which migrated toward the basal side of the cell. When the junctional complex was close to the basement membrane, immature podocytes started to interdigitate with primitive foot processes under the level of junctional complex. As primitive foot processes lengthened, the junctional complex moved between primitive foot processes to form immature foot processes. Finally, the junctional complex was gradually replaced by the slit diaphragm, resulting in the maturation of immature foot processes into mature foot processes. In conclusion, the developmental process of podocytes is now clearly visualized by block-face SEM imaging.

Identification of active sites in CO oxidation over a Pd/Al2O3 catalyst.

The active sites of Pd/Al2O3 catalysts for CO oxidations were identified by investigating the dependence of CO oxidation activities on the surface structure and morphology of Pd nanoparticles. The maximum catalytic activity was obtained for Pd particles approximately 2 nm in particle size. We performed structural analyses on the Pd surface through infrared (IR) spectroscopy of the adsorbed CO molecules. A positive correlation was obtained between catalytic activity and the fraction of linear CO adsorbed on Pd corner sites and Pd(111) facets, indicating that these sites are highly active for CO oxidation. X-ray absorption fine structure (XAFS) and spherical aberration-corrected scanning transmission electron microscopy (Cs-STEM) measurements demonstrated that Pd nanoparticles less than 2 nm in particle size with amorphous-like structures and Pd particles with large, well-ordered structures favor the formation of a high fraction of corner sites and Pd(111) facets, respectively.

Three-dimensional ultrastructure of chloroplast pockets formed under salinity stress.

We investigated the invagination structure of a chloroplast that surrounds organelles such as mitochondria and peroxisomes within a thin layer of chloroplast stroma, which is called a chloroplast pocket. In this study, chloroplast pockets were observed in rice plants subjected to salinity stress but not under moderate growth condition. They included cytosol, transparent structure, lipid bodies, mitochondria, and peroxisomes. We constructed the three-dimensional architecture of chloroplast pockets by using serial images obtained by transmission electron microscopy and focused ion beam-scanning electron microscopy. Three types of chloroplast pockets were observed by transmission electron microscopy: Organelles were completely enclosed in a chloroplast pocket (enclosed type), a chloroplast pocket with a small gap in the middle part (gap type), and a chloroplast pocket with one side open (open type). Of the 70 pockets observed by serial imaging, 35 were enclosed type, and 21 and 14 were gap and open types, respectively. Mitochondria and peroxisomes were often in contact with the chloroplast pockets. Focused ion beam-scanning electron microscopy revealed chloroplasts with a sheet structure partially surrounding peroxisomes. This fact suggests that chloroplasts might construct large sheet structures that would be related to the formation of chloroplast pockets.

Three-dimensional intracellular structure of a whole rice mesophyll cell observed with FIB-SEM.

Background and Aims: Ultrathin sections of rice leaf blades observed two-dimensionally using a transmission electron microscope (TEM) show that the chlorenchyma is composed of lobed mesophyll cells, with intricate cell boundaries, and lined with chloroplasts. The lobed cell shape and chloroplast positioning are believed to enhance the area available for the gas exchange surface for photosynthesis in rice leaves. However, a cell image revealing the three-dimensional (3-D) ultrastructure of rice mesophyll cells has not been visualized. In this study, a whole rice mesophyll cell was observed using a focused ion beam scanning electron microscope (FIB-SEM), which provides many serial sections automatically, rapidly and correctly, thereby enabling 3-D cell structure reconstruction. Methods: Rice leaf blades were fixed chemically using the method for conventional TEM observation, embedded in resin and subsequently set in the FIB-SEM chamber. Specimen blocks were sectioned transversely using the FIB, and block-face images were captured using the SEM. The sectioning and imaging were repeated overnight for 200-500 slices (each 50 nm thick). The resultant large-volume image stacks ( x = 25 µm, y = 25 µm, z = 10-25 µm) contained one or two whole mesophyll cells. The 3-D models of whole mesophyll cells were reconstructed using image processing software. Key Results: The reconstructed cell models were discoid shaped with several lobes around the cell periphery. The cell shape increased the surface area, and the ratio of surface area to volume was twice that of a cylinder having the same volume. The chloroplasts occupied half the cell volume and spread as sheets along the cell lobes, covering most of the inner cell surface, with adjacent chloroplasts in close contact with each other. Conclusions: Cellular and sub-cellular ultrastructures of a whole mesophyll cell in a rice leaf blade are demonstrated three-dimensionally using a FIB-SEM. The 3-D models and numerical information support the hypothesis that rice mesophyll cells enhance their CO 2 absorption with increased cell surface and sheet-shaped chloroplasts.

The Metal-Support Interaction Concerning the Particle Size Effect of Pd/Al2 O3 on Methane Combustion.

The particle size effect of Pd nanoparticles supported on alumina with various crystalline phases on methane combustion was investigated. Pd/θ, α-Al2 O3 with weak metal-support interaction showed a volcano-shaped dependence of the catalytic activity on the size of Pd particles, and the catalytic activity of the strongly interacted Pd/γ-Al2 O3 increased with the particle size. Based on a structural analysis of Pd nanoparticles using CO adsorption IR spectroscopy and spherical aberration-corrected scanning/transmission electron microscopy, the dependence of catalytic activity on Pd particle size and the alumina crystalline phase was due to the fraction of step sites on Pd particle surface. The difference in fraction of the step site is derived from the particle shape, which varies not only with Pd particle size but also with the strength of metal-support interaction. Therefore, this interaction perturbs the particle size effect of Pd/Al2 O3 for methane combustion.

Atomic observation of catalysis-induced nanopore coarsening of nanoporous gold.

Dealloyed nanoporous metals have attracted much attention because of their excellent catalytic activities toward various chemical reactions. Nevertheless, coarsening mechanisms in these catalysts have not been experimentally studied. Here, we report in situ atomic-scale observations of the structural evolution of nanoporous gold during catalytic CO oxidation. The catalysis-induced nanopore coarsening is associated with the rapid diffusion of gold atoms at chemically active surface steps and the surface segregation of residual Ag atoms, both of which are stimulated by the chemical reaction. Our observations provide the first direct evidence that planar defects hinder nanopore coarsening, suggesting a new strategy for developing structurally stable and highly active heterogeneous catalysts.

In situ transmission electron microscopy of ionic conductivity and reaction mechanisms in ultrathin solid oxide fuel cells.

Solid oxide fuel cells (SOFCs) are promising candidates for use in alternative energy technologies. A full understanding of the reaction mechanisms in these dynamic material systems is required to optimize device performance and overcome present limitations. Here, we show that in situ transmission electron microscopy (TEM) can be used to study redox reactions and ionic conductivity in SOFCs in a gas environment at elevated temperature. We examine model ultrathin half and complete cells in two environmental TEMs using off-axis electron holography and electron energy-loss spectroscopy. Our results from the model cells provide insight into the essential phenomena that are important for the operation of commercial devices. Changes in the activities of dopant cations in the solid electrolyte are detected during oxygen anion conduction, demonstrating the key role of dopants in electrolyte architecture in SOFCs.

Development of an integrated high-voltage electron microscope-gas chromatograph-quadrupole mass spectrometer system for the operando analysis of catalytic gas reactions.

This paper describes the development of a gas chromatography-quadrupole mass spectrometry system attached to a differential-pumping-type environmental cell of the reaction science high-voltage electron microscopy instrument at Nagoya University to distinguish unambiguously between different gas species with the same mass-to-charge ratio. Several model experiments were used to verify the efficacy of the newly proposed system, confirming its ability to analyse the atomic-level structural changes during heterogeneous catalysts and the associated gas-reaction kinetics simultaneously, providing new insights into operando measurements in the field of environmental transmission electron microscopy. Graphical Abstract.

Size specifically high activity of Ru nanoparticles for hydrogen oxidation reaction in alkaline electrolyte.

The hydrogen oxidation reaction (HOR) in alkaline electrolyte was conducted on carbon-supported Ru nanoparticles (Ru/C) of which size was controlled in the range from approximately 2 to 7 nm. The HOR activity of Ru/C normalized by the metal surface area showed volcano shaped dependence on the particle size with a maximum activity at approximately 3 nm. The HOR activity of approximately 3 nm Ru/C was higher than commercially available Pt nanoparticles (ca. 2 nm) supported on carbon. The structural analysis of Ru/C using Cs-corrected scanning transmission electron microscopy with atomic resolution revealed the unique structural change of Ru/C different from Pt/C: Ru nanoparticle structure changed from amorphous-like structure below 3 nm to metal nanocrystallite with roughened surface at approximately 3 nm and then to that with well-defined facets above 3 nm, although Pt/C kept well-defined facets even at approximately 2 nm. It is proposed that the generation of unique structure observed on approximately 3 nm Ru nanoparticles, that is, long bridged coordinatively unsaturated Ru metal surface atoms on its nanocrystallite, is a key to achieve high HOR activity.

Atomic origins of the high catalytic activity of nanoporous gold.

Distinct from inert bulk gold, nanoparticulate gold has been found to possess remarkable catalytic activity towards oxidation reactions. The catalytic performance of nanoparticulate gold strongly depends on size and support, and catalytic activity usually cannot be observed at characteristic sizes larger than 5 nm. Interestingly, significant catalytic activity can be retained in dealloyed nanoporous gold (NPG) even when its feature lengths are larger than 30 nm. Here we report atomic insights of the NPG catalysis, characterized by spherical-aberration-corrected transmission electron microscopy (TEM) and environmental TEM. A high density of atomic steps and kinks is observed on the curved surfaces of NPG, comparable to 3-5 nm nanoparticles, which are stabilized by hyperboloid-like gold ligaments. In situ TEM observations provide compelling evidence that the surface defects are active sites for the catalytic oxidation of CO and residual Ag stabilizes the atomic steps by suppressing {111} faceting kinetics.

Fabrication and modification of ordered nanoporous structures from nanophase-separated block copolymer/metal salt hybrids.

We report facile preparation of nanoporous thin films by rinsing out a metal salt from nanophase-separated hybrid films composed of a block copolymer and a water-soluble metal salt. Nanophase-separated hybrids were prepared by mixing polystyrene-b-poly(4-vinylpyridine) (PS-P4VP) and iron(III) chloride in a solvent of pyridine, followed by solvent-casting and thermal-annealing. Film samples with a thickness of ca. 100 nm were fabricated from the nanophase-separated hybrids by using a microtoming technique. Metal salts in the films were removed by immersion into water to fabricate nanopores. Morphological observations were conducted by using transmission electron microscopy (TEM). Ordered cylindrical nanopores were clearly observed in the thin films prepared from the water-immersed hybrids which originally present cylindrical nanodomains. These nanoporous films were modified by loading another metal salt, samarium(III) nitrate, into the nanopores on the basis of the coordination ability of P4VP tethered to the pore walls. The samples after loading treatment were evaluated by TEM observation and elemental analysis with energy dispersive X-ray spectroscopy.

In situ analytical electron microscopy studies of redox reactions at a YSZ/Pt interface.

Redox reactions were studied at a single yttria-stabilized zirconia (YSZ)/Pt electrode interface, in parallel with pure YSZ with no catalyst electrode, by in situ analytical electron microscopy at elevated temperatures and in an oxygen atmosphere. In situ electron holography showed that the oxide underwent reduction at elevated temperatures in a vacuum and was consequently reoxidized upon exposure to an oxygen flux at the same temperature. In situ energy loss spectroscopy measurements were in agreement with in situ electron holography observations and indicated that the oxidation state of the host cation zirconium was altered in the reduced state of the YSZ to the metastable state Zr(3+).

Selective Hydrogenation of Cinnamaldehyde over the Stepped and Plane Surface of Pd Nanoparticles with Controlled Morphologies by CO Chemisorption.

Carbon monoxide (CO) molecules are attracting attention as capping agents that control the structure of metal nanoparticles. In this study, we aimed to control the shape and surface structure of Pd particles by reducing the supported Pd precursor with CO. The reduction of Pd nanoparticles with CO promoted the exposure of step sites and generated spherical and concave-tetrahedral Pd particles on carbon and SiO2 supports. On the other hand, conventional H2-reduced Pd particles show a flattened shape. The preferential exposure of the step sites by the adsorbed CO molecules was supported by the density functional theory-calculated surface energy and the Wulff construction. Morphology- and surface-controlled Pd nanoparticles were used to study the surface structure and morphology effects of Pd nanoparticles on cinnamaldehyde (CAL) hydrogenation. With an increase in the fraction of step sites on Pd nanoparticles, the hydrogenation activity and selectivity of hydrocinnamaldehyde (HCAL) increased. On step sites, the adsorption of the C═C bond of CAL proceeded preferentially, and HCAL was efficiently and selectively generated.

Environmental high-voltage S/TEM combined with a quadrupole mass spectrometer for concurrent in situ structural characterization and detection of product gas molecules associated with chemical reactions.

We introduce herein a combined environmental high-voltage electron microscope and a quadrupole mass spectrometer to detect product gas species associated with chemical reactions occurring in the microscope, which allows new operando experiments of, for instance, observing catalytic reactions by concurrent high-resolution transmission electron microscope (TEM) observation. We demonstrate the preliminary results of redox reactions, where the product gas species are unambiguously detected, associated with the expected structural transformations observed with TEM.

Topologically immobilized catalysis centre for long-term stable carbon dioxide reforming of methane.

Methane reforming at low temperatures is of growing importance to mitigate the environmental impact of the production of synthesis gas, but it suffers from short catalyst lifetimes due to the severe deposition of carbon byproducts. Herein, we introduce a new class of topology-tailored catalyst in which tens-of-nanometer-thick fibrous networks of Ni metal and oxygen-deficient Y2O3 are entangled with each other to form a rooted structure, i.e., Ni#Y2O3. We demonstrate that the rooted Ni#Y2O3 catalyst stably promotes the carbon-dioxide reforming of methane at 723 K for over 1000 h, where the performance of traditional supported catalysts such as Ni/Y2O3 diminishes within 100 h due to the precluded mass transport by accumulated carbon byproducts. In situ TEM demonstrates that the supported Ni nanoparticles are readily detached from the support surface in the reaction atmosphere, and migrate around to result in widespread accumulation of the carbon byproducts. The long-term stable methane reforming over the rooted catalyst is ultimately attributed to the topologically immobilized Ni catalysis centre and the synergistic function of the oxygen-deficient Y2O3 matrix, which successfully inhibits the accumulation of byproducts.