RESUMEN
New biomass crop hybrids for bioeconomic expansion require yield projections to determine their potential for strategic land use planning in the face of global challenges. Our biomass growth simulation incorporates radiation interception and conversion efficiency. Models often use leaf area to predict interception which is demanding to determine accurately, so instead we use low-cost rapid light interception measurements using a simple laboratory-made line ceptometer and relate the dynamics of canopy closure to thermal time, and to measurements of biomass. We apply the model to project the European biomass potentials of new market-ready hybrids for 2020-2030. Field measurements are easier to collect, the calibration is seasonally dynamic and reduces influence of weather variation between field sites. The model obtained is conservative, being calibrated by crops of varying establishment and varying maturity on less productive (marginal) land. This results in conservative projections of miscanthus hybrids for 2020-2030 based on 10% land use conversion of the least (productive) grassland and arable for farm diversification, which show a European potential of 80.7-89.7 Mt year-1 biomass, with potential for 1.2-1.3 EJ year-1 energy and 36.3-40.3 Mt year-1 carbon capture, with seeded Miscanthus sacchariflorus × sinensis displaying highest yield potential. Simulated biomass projections must be viewed in light of the field measurements on less productive land with high soil water deficits. We are attempting to model the results from an ambitious and novel project combining new hybrids across Europe with agronomy which has not been perfected on less productive sites. Nevertheless, at the time of energy sourcing issues, seed-propagated miscanthus hybrids for the upscaled provision of bioenergy offer an alternative source of renewable energy. If European countries provide incentives for growers to invest, seeded hybrids can improve product availability and biomass yields over the current commercial miscanthus variety.
RESUMEN
Demand for sustainably produced biomass is expected to increase with the need to provide renewable commodities, improve resource security and reduce greenhouse gas emissions in line with COP26 commitments. Studies have demonstrated additional environmental benefits of using perennial biomass crops (PBCs), when produced appropriately, as a feedstock for the growing bioeconomy, including utilisation for bioenergy (with or without carbon capture and storage). PBCs can potentially contribute to Common Agricultural Policy (CAP) (2023-27) objectives provided they are carefully integrated into farming systems and landscapes. Despite significant research and development (R&D) investment over decades in herbaceous and coppiced woody PBCs, deployment has largely stagnated due to social, economic and policy uncertainties. This paper identifies the challenges in creating policies that are acceptable to all actors. Development will need to be informed by measurement, reporting and verification (MRV) of greenhouse gas emissions reductions and other environmental, economic and social metrics. It discusses interlinked issues that must be considered in the expansion of PBC production: (i) available land; (ii) yield potential; (iii) integration into farming systems; (iv) R&D requirements; (v) utilisation options; and (vi) market systems and the socio-economic environment. It makes policy recommendations that would enable greater PBC deployment: (1) incentivise farmers and land managers through specific policy measures, including carbon pricing, to allocate their less productive and less profitable land for uses which deliver demonstrable greenhouse gas reductions; (2) enable greenhouse gas mitigation markets to develop and offer secure contracts for commercial developers of verifiable low-carbon bioenergy and bioproducts; (3) support innovation in biomass utilisation value chains; and (4) continue long-term, strategic R&D and education for positive environmental, economic and social sustainability impacts.
RESUMEN
The Miscanthus genus of perennial grasses is grown for bioenergy and biorenewable feedstocks. Most Miscanthus crop is M × giganteus which is rhizome propagated and therefore difficult to multiply at large scale. Seed-based propagation of new hybrids is being developed, but Miscanthus is difficult to establish from seed especially in the field. Miscanthus is often grown on marginal land adding to the challenge of successfully establishing the crop. Improved understanding of the limits and biology of germination in Miscanthus species is needed. Seed germination is affected by physical and chemical factors that impact germination differently depending on level of exposure. In this investigation of Miscanthus germination, four hormones plus water stress were investigated and the range over which these factors affect germination was determined. An efficient Taguchi experimental design was used to assess the five factors in combination with the effects of light and seed priming. This determined an example of a set of optimum conditions for Miscanthus germination and demonstrated how this could change based on fixing one condition. The experiment showed how environmental stress impacted germination and how treatments such as gibberellic acid could be used to mitigate stress.
Asunto(s)
Germinación/fisiología , Poaceae/fisiología , Rizoma/fisiología , Semillas/fisiología , Estrés Fisiológico/fisiologíaRESUMEN
High yielding perennial crops are being developed as a sustainable feedstock for renewable energy and bioproducts. Miscanthus is a leading biomass crop, but most plantations comprise a sterile hybrid Miscanthus × giganteus that is clonally propagated. To develop new varieties across large areas, rhizome cloning is inefficient, time consuming and expensive. Alternative approaches use seed, and in temperate regions, this has been successfully applied by raising seedlings as plug plants in glasshouses before transfer to the field. Direct sowing has yet to be proven commercially viable because poor germination has resulted in inconsistent stand establishment. Oversowing using seed clusters is a common approach to improve the establishment of crops and it was hypothesized that such an approach will improve uniformity of density in early Miscanthus stands and thereby improve yield. Sowing multiple seeds creates potential for new interactions, and we identified at least two inhibitory mechanisms related to seed numbers. Germinating seed produced allelopathic effects on nearby seed thereby inhibiting plant growth. The inhibitory effect of Miscanthus seed on germination percentages was related to seed number within clusters. An extract from germinating Miscanthus seed inhibited the germination of Miscanthus seed. The extract was analysed by HPLC, which identified a complex mixture including several known allelopathic compounds including proanthocyanidins and vanillic acid. There was also evidence of root competition in soil in a controlled environment experiment. When the experiment on competition was replicated at field scale, the establishment rates were much lower and there was evidence of shoot competition. We conclude that the numbers of seed required to ensure an acceptable level of establishment in the field may be economically impractical until other agronomic techniques are included either to reduce the inhibitory effects of higher seed numbers or to reduce oversowing rates.
RESUMEN
Genetic improvement through breeding is one of the key approaches to increasing biomass supply. This paper documents the breeding progress to date for four perennial biomass crops (PBCs) that have high output-input energy ratios: namely Panicum virgatum (switchgrass), species of the genera Miscanthus (miscanthus), Salix (willow) and Populus (poplar). For each crop, we report on the size of germplasm collections, the efforts to date to phenotype and genotype, the diversity available for breeding and on the scale of breeding work as indicated by number of attempted crosses. We also report on the development of faster and more precise breeding using molecular breeding techniques. Poplar is the model tree for genetic studies and is furthest ahead in terms of biological knowledge and genetic resources. Linkage maps, transgenesis and genome editing methods are now being used in commercially focused poplar breeding. These are in development in switchgrass, miscanthus and willow generating large genetic and phenotypic data sets requiring concomitant efforts in informatics to create summaries that can be accessed and used by practical breeders. Cultivars of switchgrass and miscanthus can be seed-based synthetic populations, semihybrids or clones. Willow and poplar cultivars are commercially deployed as clones. At local and regional level, the most advanced cultivars in each crop are at technology readiness levels which could be scaled to planting rates of thousands of hectares per year in about 5 years with existing commercial developers. Investment in further development of better cultivars is subject to current market failure and the long breeding cycles. We conclude that sustained public investment in breeding plays a key role in delivering future mass-scale deployment of PBCs.
RESUMEN
BACKGROUND: Miscanthus is a leading second generation bio-energy crop. It is mostly rhizome propagated; however, the increasing use of seed is resulting in a greater need to investigate germination. Miscanthus seed are small, germination is often poor and carried out without sterilisation; therefore, automated methods applied to germination detection must be able to cope with, for example, thresholding of small objects, low germination frequency and the presence or absence of mould. RESULTS: Machine learning using k-NN improved the scoring of different phenotypes encountered in Miscanthus seed. The k-NN-based algorithm was effective in scoring the germination of seed images when compared with human scores of the same images. The trueness of the k-NN result was 0.69-0.7, as measured using the area under a ROC curve. When the k-NN classifier was tested on an optimised image subset of seed an area under the ROC curve of 0.89 was achieved. The method compared favourably to an established technique. CONCLUSIONS: With non-ideal seed images that included mould and broken seed the k-NN classifier was less consistent with human assessments. The most accurate assessment of germination with which to train classifiers is difficult to determine but the k-NN classifier provided an impartial consistent measurement of this important trait. It was more reproducible than the existing human scoring methods and was demonstrated to give a high degree of trueness to the human score.
RESUMEN
Direct sowing of Miscanthus seed could lower crop establishment costs, and increase the rate of grower uptake and biomass supply for the emerging bio-economy. A replicated field trial was conducted at two contrasting UK sites: Aberystwyth (ABR) in mid-Wales and Blankney (BLK) in Lincolnshire. These sites encompass the west-east meteorological gradient in the United Kingdom where the growing season at ABR is cooler and wetter while BLK is warmer and drier. Primed and unprimed Miscanthus sinensis seeds were sown directly onto the soil surface with and without a clear biodegradable mulch film, at nine dates interspersed from May to October. Average daily mean soil surface temperatures measured over the first 2 months after sowing under the mulch film were higher than control plots (2.7°C ABR and 4.2°C BLK). At both sites, the film covering also affected soil volumetric moisture relative to uncovered control plots (-3% ABR and 8% BLK), demonstrating the negative impact of mulch film when sowing on dry soil. Over nine sowings, seed germination at ABR under film varied between -28% and +18% of germination under control conditions. Seedlings from the first three sowings at both sites under film had sufficient physiological maturity to survive the first winter period. At BLK, mulch film significantly increased tiller count and height in both the first and second years after sowing. At ABR, where temperatures were lower, film covering significantly increased tiller height but not count. Water priming had no significant effect on seed viability or germination in the field tests. Base temperatures for germination of primed and unprimed seeds on a thermal gradient plate were 7.0°C and 5.7°C, respectively, with a ± 1.7°C confidence interval. Based on our results for M. sinensis in the United Kingdom, we recommend the sowing of unprimed seed in May under film and only when the soil is moist.
RESUMEN
Plant breeding is achieved through the controlled self- or cross-pollination of individuals and typically involves isolation of floral parts from selected parental plants. Paper, cellulose or synthetic materials are used to avoid self pollination or cross contamination. Low seed set limits the rate of breeding progress and increases costs. We hypothesized that a novel 'non-woven' fabric optimal for both pollination and seed set in multiple plant species could be developed. After determining the baseline pollen characteristics and usage requirements we established iterative three phase development and biological testing. This determined (1) that white fabric gave superior seed return and informed the (2) development of three non-woven materials using different fibre and layering techniques. We tested their performance in selfing and hybridisation experiments recording differences in performance by material type within species. Finally we (3) developed further advanced fabrics with increased air permeability and tested biological performance. An interaction between material type and species was observed and environmental decoupling investigated, showing that the non-woven fabrics had superior water vapour transmission and temperature regulation compared to controls. Overall, non-woven fabrics outperformed existing materials for both pollination and seed set and we found that different materials can optimize species-specific, rather than species-generic performance.