Systemic drugs with impact on osteoarthritis.

Articular cartilage has a complex structure and metabolism which allow for a proper movement within joints. Nevertheless, several systemically administered pharmacological agents have been proved to improve the anabolic response in the case of cartilage lesions. Alendronate, glucosamine, chondroitin sulfate, hyaluronic acid, collagen hydrolysate, vitamin C, vitamin D, aspirin and strontium ranelate have shown positive results in clinical trials. On the other hand, calcitonin, risedronate, doxycycline, and celecoxib did not slow the progression of cartilage lesions in clinical trials. Other systemic drugs or supplements such as teriparatide, leptin, zoledronic acid, bevacizumab, atorvastatin, omega-3 fatty acid, naringin, MSM, selenium, zinc, magnesium, resveratrol, donepezil, naproxen, etodolac, ursodeoxycholic acid (UDCA), lithium chloride, and rebamipide showed positive results in in vitro and animal studies but clinical trials are needed to confirm the positive impact on cartilage repair. A number of molecules, not currently available on the market, have also shown promising results in cartilage healing, such as licofelone, sclerostin, cyclopamine, cyclodextrin polysulfate, AG-041R, osteoprotegerin, rhMK, ß-cryptoxanthine, NF-κb essential modulator binding domain (NBD), TGF-ß-neutralizing antibody, osteogenic protein-1 (BMP-7), fibroblast growth factor 2 (FGF2), and RhBMP-2. Currently available systemic drugs that impair cartilage healing are represented by corticosteroids, vitamin A, and fluoroquinolones.

Understanding the basis of medical use of poly-lactide-based resorbable polymers and composites - a review of the clinical and metabolic impact.

This review intended to comparatively explain and present the most important medical use and biological impact of poly-lactides and lactide-based composites. The utilization and degradation of compounds based on lactic acid and polylactides is described in detail. Understanding the metabolism and degradation phenomenon and the factors that potentially influence it is key to modulating their properties as well as their characteristics driven from the fabrication procedures and the fields of use. All these are commented according to the clinician's criteria. The current debate on the advantages and shortcomings of various resorbable polymeric materials categories is also analyzed, from the perspective of the users of resorbable polylactide-based biomaterials. The scientific literature comprises either distinct chemical and physical or specific animal or medical description of resorbable materials; so that in compensation, the present review covers all topics for the most appropriate comprehensive update of the reader.

Systemic drugs that influence titanium implant osseointegration.

Titanium implants are widely used on an increasing number of patients in orthopedic and dental medicine. Despite the good survival rates of these implants, failures that lead to important socio-economic consequences still exist. Recently, research aimed at improving implant fixation, a process called osseointegration, has focused on a new, innovative field: systemic delivery of drugs. Following implant fixation, patients receive systemic drugs that could either impair or enhance osseointegration; these drugs include anabolic and anti-catabolic bone-acting agents in addition to new treatments. Anabolic bone-acting agents include parathyroid hormone (PTH) peptides, simvastatin, prostaglandin EP4 receptor antagonist, vitamin D and strontium ranelate; anti-catabolic bone-acting agents include compounds like calcitonin, biphosphonates, RANK/RANKL/OPG system and selective estrogen receptor modulators (SERM). Examples of the new therapies include DKK1- and anti-sclerostin antibodies. All classes of treatments have proven to possess positive impacts such as an increase in bone mineral density and on osseointegration. In order to prevent complications from occurring after surgery, some post-operative systemic drugs are administered; these can show an impairment in the osseointegration process. These include nonsteroidal anti-inflammatory drugs, proton pump inhibitors and selective serotonin reuptake inhibitors. The effects of aspirin, acetaminophen, opioids, adjuvants, anticoagulants and antibiotics in implant fixations are not fully understood, but studies are being carried out to investigate potential ramifications. It is currently accepted that systemic pharmacological agents can either enhance or impair implant osseointegration; therefore, proper drug selection is essential. This review aims to discuss the varying effects of three different classes of treatments on improving this process.

In quest of optimal drug-supported and targeted bone regeneration in the cranio facial area: a review of techniques and methods.

Craniofacial bone structures are frequently and extensively affected by trauma, tumors, bone infections and diseases, age-related degeneration and atrophy, as well as congenital malformations and developmental anomalies. Consequently, severe encumbrances are imposed on both patients and healthcare systems due to the complex and lengthy treatment duration. The search for alternative methods to bone transplantation, grafting and the use of homologous or heterologous bone thus responds to one of the most significant problems in human medicine. This review focuses on the current consensus of bone-tissue engineering in the craniofacial area with emphasis on drug-induced stem cell differentiation and induced bone regeneration.

Dental follicle stem cells in bone regeneration on titanium implants.

BACKGROUND: We aimed to demonstrate that DF stem cells from impacted molars and canines can be used to improve bone regeneration on titanium implants surfaces. This study highlights the presence of stem cells in DF, their potential to adhere and differentiate into osteoblasts on different types of titanium surfaces. RESULTS: Isolated cells from the harvested DF tissue from impacted canine/molars, expressed stem cells markers. Differentiation into bone cells was induced in presence or absence of BMP-2 and TGFß1. The presence of growth factors until 28 days in medium maintained the cells in an earlier stage of differentiation with a lower level of specific bone proteins and a higher expression of alkaline phosphatase (ALP). Influence of titanium implants with different bioactive coatings, hydroxyapatite (TiHA) and with silicatitanate (TiSiO2), and porous Ti6Al7Nb implants as control (TiCtrl), was studied in terms of cell adhesion and viability. Ti HA implants proved to be more favorable for adhesion and proliferation of DF stem cells in first days of cultivation. The influence of titanium coatings and osteogenic differentiation mediums with or without growth factors were evaluated. Additional BMP-2 in the medium did not allow DF stem cells to develop a more mature phenotype, leaving them in a pre-osteogenic stage. The best sustained mineralization process evaluated by immuno-cytochemical staining, scanning electron microscopy and Ca(2+) quantification was observed for TiHA implants with a higher expression of ALP, collagen and Ca(2+) deposition. Long term culturing (70 days) on titanium surfaces of DF stem cells in standard medium without soluble osteogenic inducers, indicated that HA coating is more favorable, with the acquisition of a more mature osteoblastic phenotype as shown by immunocytochemical staining. These findings demonstrated that even in absence of exogenous osteogenic factors, TiHA implants and in a lesser extent TiCtrl and TiSiO2 implants can induce and sustain osteogenic differentiation of DF stem cells, by their chemical and topographical properties. CONCLUSIONS: Our research demonstrated that DF stem cells have a spontaneous tendency for osteogenic differentiation and can be used for improving bone regeneration on titanium implants surfaces.

In vitro study of biocompatibility of a graphene composite with gold nanoparticles and hydroxyapatite on human osteoblasts.

The purpose of this study was to evaluate the biocompatibility of some composites consisting of different proportions of graphene in combination with gold nanoparticles (AuNPs) and nanostructured hydroxyapatite (HA) on osteoblast viability, proliferation and differentiation. Au/HA@graphene composites synthesized by the catalytic chemical vapor deposition induction heating method with acetylene as the carbon source and over an Au/HA catalyst, were characterized by transmission electron microscopy, thermogravimetric analysis and Raman spectroscopy and showed that the few-layer graphene was grown over the Au/HA catalyst. The cytocompatibility study was performed using the fluorescein diacetate assay for assessment of the viability and proliferation of osteoblasts cultivated in the presence of HA, Au/HA and Au/HA@graphene composites as colloidal suspensions or as substrates. The most favorable composites for cell adhesion and proliferation were HA, Au/HA and Au/HA composites with 1.6% and 3.15% concentration of graphenes. Immunocytochemical staining performed after 19 days of osteoblasts cultivation on substrates showed that the graphene composites induced low expression of alkaline phosphatase compared to the control group and HA and Au/HA substrates. The presence of graphene in the substrate composition also induced an increased level of intracellular osteopontin and cytoskeleton reorganization (actin-F) depending on graphene concentration, suggesting cell activation, increased cellular adhesion and acquisition of a mechanosensorial osteocyte phenotype.

2D ultrasonography and contrast enhanced ultrasound for the evaluation of cavitating mesenteric lymph node syndrome in a patient with refractory celiac disease and enteropathy T cell lymphoma.

BACKGROUND: The cavitating mesenteric lymph node syndrome (CMLNS) is a rare manifestation of celiac disease, with an estimated mortality rate of 50%. Specific infections and malignant lymphoma may complicate its clinical course and contribute to its poor prognosis. Diagnosing the underlying cause of CMLNS can be challenging. This is the first report on contrast enhanced ultrasound (CEUS) findings in enteropathy associated T-cell lymphoma (EATL) complicating CMLNS in a gluten-free compliant patient with persistent symptoms and poor outcome. CASE PRESENTATION: We present the case of a 51-year old Caucasian male patient, diagnosed with celiac disease and CMLNS. Despite his compliance to the gluten-free diet the symptoms persisted and we eventually considered the possible development of malignancy. No mucosal changes suggestive of lymphoma were identified with capsule endoscopy. Low attenuation mesenteric lymphadenopathy, without enlarged small bowel segments were seen on computed tomography. CEUS revealed arterial rim enhancement around the necrotic mesenteric lymph nodes, without venous wash-out. No malignant cells were identified on laparoscopic mesenteric lymph nodes biopsies. The patient died due to fulminant liver failure 14 months later; the histopathological examination revealed CD3/CD30-positive atypical T-cell lymphocytes in the liver, mesenteric tissue, spleen, gastric wall, kidney, lung and bone marrow samples; no malignant cells were present in the small bowel samples. CONCLUSIONS: CEUS findings in EATL complicating CMLNS include arterial rim enhancement of the mesenteric tissue around the cavitating lymph nodes, without venous wash-out. This vascular pattern is not suggestive for neoangiogenesis, as arteriovenous shunts from malignant tissues are responsible for rapid venous wash-out of the contrast agent. CEUS failed to provide a diagnosis in this case.

Pre- and postoperative assessment of sinus grafting procedures using cone-beam computed tomography compared with panoramic radiographs.

OBJECTIVES: The present study evaluated the clinical validity of cone-beam computed tomography (CBCT) scans in comparison to panoramic radiographs regarding preoperative implant planning in combination with sinus grafting procedures. MATERIALS AND METHODS: Preoperative assessment of the maxillary sinuses and implant planning using panoramic radiographs and CBCT scans was performed on 16 sinuses (13 patients) and comprised choice of treatment, timing of implant placement, sinus morphology, level of confidence, complication prediction and graft volume assessment. Six examiners were involved in the study. RESULTS: In the majority of cases there was a concordance between the treatment type based on either panoramic radiographs or CBCT. If any difference was found, this was due to an overestimation of bone quantity and quality on panoramic radiographs. The assessment of sinus morphology showed a significantly higher detection rate of sinus mucosal hypertrophy on CBCT. The most appealing result is a significant increase in surgical confidence and a significantly better prediction of complications when using CBCT. CONCLUSIONS: A preoperative planning based on CBCT seems to improve sinus diagnostics and surgical confidence.

Influence of three laser wavelengths on human fibroblasts cell culture.

Although experimental studies in vitro and vivo have been numerous, the effect of laser wavelength irradiation on human fibroblast cell culture is poorly understood. This emphasizes the need of additional cellular and molecular research into laser influence with low energy and power. The aim of this study was to assess the influence of three different laser wavelengths on the human skin fibroblasts cell culture. We wanted to evaluate if near infrared lasers had any influence in healing of wounds by stimulating mitochondrial activity of fibroblasts. The cells were irradiated using 830-, 980- and 2,940-nm laser wavelengths. The irradiated cells were incubated and their mitochondrial activity was assessed by the MTT assay at 24, 48 and 72 h. Simultaneously, an apoptosis assay was assessed on the irradiated fibroblasts. It can be concluded that laser light of the near-infrared region (830 and 980 nm) influences fibroblasts mitochondrial activity compared to the 2,940-nm wavelength which produces apoptosis.

Disk and joint morphology variations on coronal and sagittal MRI in temporomandibular joint disorders.

OBJECTIVES: This study aims to assess the disk morphology and the condyle position in subjects with temporomandibular (TMJ) disk displacements on sagittal and coronal magnetic resonance imaging (MRI). MATERIALS AND METHODS: Seventy-four TMJs (from 37 patients) with positive clinical TMD symptoms according to the RDC/TMD axis I protocol were evaluated by 1.5 T MRI. Disk position, disk morphology, sagittal and coronal condyle position, joint effusion, joint space, and coronal condyle angulation were evaluated. Multivariate logistic regression was used to explore the relationship between disk displacement and MRI variables. RESULTS: Disk displacement with reduction (DDR) was found in 36.48 % and without reduction (DDwR), in 21.62 % of the joints. Disk displacement was anterior in 35.1 %, anterior-medial in 13.5 %, and anterior-lateral in 9.45 % of cases. The thickened posterior band (94.48 OR, p = 0.001) and the posterior condyle position (4.57 OR, p = 0.03) were more likely found on sagittal MRI in disk displacements. On coronal slices, the disk displacement was significantly associated with the distance from the most medial condyle point to the midplane (p < 0.05). CONCLUSIONS: Disk displacement is associated with changes of disk shape, disk dimension, and condyle position on sagittal MRI. A significant variation of the distance from the most medial condyle point to the midplane in disk displacement was found on coronal MRI. CLINICAL RELEVANCE: Our study highlights the existence of changes on coronal MRI in TMD patients which should be assessed for better understanding of the clinical evolution of temporomandibular disorders.

Improving the Mechanical Properties of Orthodontic Occlusal Splints Using Nanoparticles: Silver and Zinc Oxide.

The goal of the current study was to determine the mechanical proprieties of polymethylmethacrylate (PMMA) and the improved compound, the graphene-based PMMA, with Zn and Ag and to compare the results. Scanning electron microscopy analysis of the samples before and after the mechanical test was conducted. The compression behavior, flexural properties, tensile strength, and shape of the samples were all investigated and compared between the variants of PMMA. Commercially available polymethylmethacrylate was used (Orthocryl®-Dentaurum, Ispringen, Germany) with the salt and pepper technique according to the manufacturer's instructions to produce 20 samples for each mechanical trial with standard cylinders (4 mm diameter × 8 mm length) for compression, parallelepipedal prisms for flexing (2 mm × 2 mm × 25 mm) and flat samples for traction. There was no statistical difference in the mechanical proprieties of the samples evaluated, although there were values that could suggest significance. The graphene-based PMMA demonstrated good mechanical proprieties, like the commercially available PMMA, and appears promising for future clinical use based on its multiple advantages.

Biocompatibility and histological responses of eggshell membrane for dental implant-guided bone regeneration.

Guided bone regeneration (GBR) utilizing eggshell membrane (ESM) as a potential biomaterial for dental implant therapy augmentation was explored in this study. ESM, an environmentally friendly waste product, possesses collagen-rich characteristics. The biocompatibility and histological responses of ESM were investigated in a rat model. Twelve young adult Wistar rats were used in this study. ESM samples were implanted in subcutaneous and intramuscular pockets, and samples were collected at 48 hours, 4 weeks, and 8 weeks post-implantation. Histological analysis revealed the changes in ESM over time. Results showed that ESM maintained its structural integrity, induced a moderate cellular response, and exhibited slow degradation, indicating potential biocompatibility. However, the lack of organized collagen arrangement in ESM led to the formation of irregular and polymorphic spaces, allowing cell migration. Encapsulation of ESM by newly proliferating collagen fibers and multinucleated giant cells was observed at later time points, indicating a foreign body reaction. Crosslinking might improve its performance as a separation membrane, as it has the potential to resist enzymatic degradation and enhance biomechanical properties. In conclusion, ESM demonstrated biocompatibility, slow degradation, and lack of foreign body reaction. While not suitable as a complete separation membrane due to irregular collagen arrangement, further research involving crosslinking could enhance its properties, making it a viable option for guided bone regeneration applications in dental implant therapy. This study highlights the potential of repurposing waste materials for medical purposes and underscores the importance of controlled collagen structure in biomaterial development.

Comparison of the Eggshell and the Porcine Pericardium Membranes for Guided Tissue Regeneration Applications.

Guided bone regeneration is frequently used to reconstruct the alveolar bone to rehabilitate the mastication using dental implants. The purpose of this article is to research the properties of eggshell membrane (ESM) and its potential application in tissue engineering. The study focuses on the structural, mechanical, and histological characteristics of ESM extracted from Gallus domesticus eggs and to compare them to a commercially available porcine pericardium membrane (Jason® membrane, botiss biomaterials GmbH, Zossen, Germany). Thus, histology was performed on the ESM, and a comparison of the microstructure through scanning electron microscopy and atomic force microscopy (AFM) was conducted. Also, mechanical tensile strength was evaluated. Samples of ESM were prepared and treated with alcohol for fixation and disinfection. Histological analysis revealed that the ESM architecture is constituted out of loose collagen fibers. However, due to the random arrangement of collagen fibers within the membrane, it might not be an effective barrier and occlusive barrier. Comparative analyses were performed between the ESM and the AFM examinations and demonstrated differences in the surface topography and mechanical properties between the two membranes. The ESM exhibited rougher surfaces and weaker mechanical cohesion attributed to its glycoprotein content. The study concludes that while the ESM displays favorable biocompatibility and resorb ability, its non-uniform collagen arrangement limits its suitability as a guided bone regeneration membrane in the current non-crosslinked native form. Crosslinking techniques may enhance its properties for such applications. Further research is needed to explore modifications and processing methods that could leverage the ESM's unique properties for tissue engineering purposes.

Characterization of eggshell as a bio-regeneration material.

Objective: The objective of this study was to identify and summarize the characteristic features of eggshell for regeneration purpose in oral surgery procedures. Methods: A review of literature was undertaken based on the PubMed database. A search to reveal the current state of knowledge and the current uses of the eggshell as a biomaterial was performed. The characteristics of the materials, the specific use, the procedure and the outcome were extracted from the articles. Results: The materials have been found to be used in humans, animals, and in vitro studies. There is a wide use regarding oral surgery especially in experimental models. There have also been attempts to enhance certain properties and improve the capabilities of eggshell as a biomaterial. There is yet a commercial product to be developed and approved for human use. Conclusions: Eggshell can be an important biowaste which can be of use in guided bone regeneration procedures, but it has not yet entered the commercial phase and approval through official regulation channels.

Statistical Comparison of the Mechanical Properties of 3D-Printed Resin through Triple-Jetting Technology and Conventional PMMA in Orthodontic Occlusal Splint Manufacturing.

Dental 3D-printing technologies, including stereolithography (SLA), polyjet (triple-jetting technology), and fusion deposition modeling, have revolutionized the field of orthodontic occlusal splint manufacturing. Three-dimensional printing is now currently used in many dental fields, such as restorative dentistry, prosthodontics, implantology, and orthodontics. This study aimed to assess the mechanical properties of 3D-printed materials and compare them with the conventional polymethylmethacrylate (PMMA). Compression, flexural, and tensile properties were evaluated and compared between PMMA samples (n = 20) created using the "salt and pepper" technique and digitally designed 3D-printed samples (n = 20). The samples were subjected to scanning electron microscope analysis. Statistical analysis revealed that the control material (PMMA) exhibited a significantly higher Young's modulus of compression and tensile strength (p < 0.05). In the flexural tests, the control samples demonstrated superior load at break results (p < 0.05). However, the 3D-printed samples exhibited significantly higher maximum bending stress at maximum load (MPa) (p < 0.05). Young's modulus of tensile testing (MPa) was statistically significant higher for the control samples, while the 3D-printed samples demonstrated significantly higher values for elongation at break (p < 0.05). These findings indicate that 3D-printed materials are a promising alternative that can be effectively utilized in clinical practice, potentially replacing traditional heat-cured resin in various applications.

Lateral Cephalometric Analytical Uses for Temporomandibular Joint Disorders: The Importance of Cervical Posture and Hyoid Position.

The temporomandibular joint disorder (TMD) is a syndrome that affects the masticatory muscles and temporomandibular joint (TMJ). Its pathophysiology is not yet fully known. Cephalometric analysis is used for routine evaluation regarding orthodontic treatment and other purposes. The aim of this study was to assess if using cephalometric analysis and TMJ conservative therapy to evaluate the hyoid bone position and the cervical posture reduced symptoms in adults with TMDs compared to no intervention. The authors conducted a systematic review of the literature (PubMed, Cochrane, Web of Science, Scopus, and Embase) for clinical studies of TMDs with conservative treatment and lateral cephalometric analysis of the hyoid and cervical posture. To assess the risk of bias for non-randomized clinical trials ROBINS-I tool was used. Out of 137 studies found, 6 remained to be included. Most of them found a link between TMD and lateral cephalometric analysis, but there was a high risk of bias. This review found a possible link between TMDs, the neck and cervical posture. There is a benefit reported regarding the use of the lateral cephalometry as a treatment, but more extensive prospective randomized clinical trials are necessary to be able to draw definitive conclusions.

The quality of life after cleft lip and palate surgery.

Background and aims: Labio-maxillo-palatal clefts represent one of the most common congenital malformations, which manifests through aesthetic, functional and psycho-social alterations. The long course of multidisciplinary treatments represent a psycho-emotional and financial burden for both the patient and his family, being an important factor in the complex management of these patients.The study aims to assess the quality of life of parents of children with clefts and the psychosocial impact on the family and society. Methods: The study included 40 subjects who met the inclusion criteria for this study. Following patient informed consent and the approval of the ethics committee, the data were collected by applying the quality-of-life evaluation questionnaire. The evaluation was performed using the Likert scale (1 - not at all to 5 - very satisfactory), and the data were statistically processed. Results: Most of the questionnaires were completed by the mother, who accompanied the child to the regular check-up; 58% of parents believe that their social life is not affected by having a child with a cleft, and 83% say that interfamilial relationships have not been affected. Most parents consider that the postoperative result was very good, which led to improved psycho-social integration of the child. Conclusions: The study confirmed an acceptable quality of life for the children's parents, which was not influenced by the family presence of a child with a cleft. At the same time, the excessive care of the parents for the child with the cleft was confirmed. The postoperative improvement of the aesthetic aspect led to a much better psycho-emotional integration of the child in the society.

Real-time sonoelastography of major salivary gland tumors.

OBJECTIVE: The purpose of this study was to determine the performance of real-time sonoelastography in the differential diagnosis of salivary gland tumors. SUBJECTS AND METHODS: Between 2007 and 2010, 74 salivary gland tumors were examined by ultrasound and sonoelastography in 66 patients. Lesions were graded according to a 4-point elastography score. Surgical excision and histopathologic examination were performed in all cases. The difference in elastographic score between benign and malignant masses and that between pleomorphic adenomas and Warthin tumors were evaluated. RESULTS: Of the 74 salivary tumors, 63 were located in the parotid, and 11 were in the submandibular gland. There were 18 malignant and 56 benign tumors. The mean (± SD) elastographic score was 2.58 ± 0.87 for pleomorphic adenomas, 2.15 ± 0.80 for Warthin tumors, 2.00 ± 0.57 for other benign tumors, and 2.94 ± 0.87 for malignant tumors. For benign tumors overall, the mean elastographic score was 2.41 ± 0.87. The difference in elastographic score between benign and malignant tumors overall was statistically significant (p < 0.05), but the difference between malignant tumors and pleomorphic adenomas and that between Warthin tumors and pleomorphic adenomas were not statistically significant. Using cutoff values between scores 2 and 3 and scores 3 and 4, there was no statistically significant difference between benign and malignant tumors. CONCLUSION: Although this study revealed a difference in elastographic score between benign and malignant tumors, detailed analysis did not provide consistent results. Consequently, real-time sonoelastography appears to be a limited technique in the differential diagnosis between benign and malignant salivary masses.

Transverse stability of 3-piece Le Fort I osteotomies.

PURPOSE: The transverse dentoalveolar and skeletal stability of multipiece Le Fort I osteotomies with 3 different techniques was investigated. MATERIALS AND METHODS: The records of 87 patients undergoing bimaxillary osteotomies with 3-piece Le Fort I osteotomy were evaluated. According to the surgical technique of maxillary expansion, the subjects were divided into 3 groups: unilateral palatal osteotomy (group A), bilateral palatal osteotomy (group B), and unilateral palatal osteotomy with fixation of the palatal vault with a resorbable plate (group C). In group A palatal bone grafts were used in 9 patients. Posterior-anterior cephalograms and dental casts were taken before surgery (T1), immediately after surgery (T2), and after a follow-up of 12 to 15 months (T3). The skeletal base was measured between the intersections of the lateral contour of the maxillary alveolar process and the lower contour of the maxillo-zygomatic process. Dentoalveolar width was measured between the first premolars and the first molars. According to the magnitude of expansion, the groups were divided into the following subgroups: negative (constriction), 0 to 2 mm, greater than 2 mm to 4 mm, and greater than 4 mm. An analysis of variance with Bonferroni correction was used to compare the demographic and treatment characteristics and the surgical and postsurgical transverse movements of the 3 study groups. The paired t test was run to evaluate the surgical changes (T2 - T1) and the postsurgical stability (T3 - T2). The influence of palatal bone grafts and downgrafting of the maxilla on the amount of relapse was investigated with the unpaired t test. RESULTS: The study variables (T1), the surgical changes (T2 - T1), and the postsurgical changes (T3 - T2) showed no significant differences between the 3 study groups. However, a tendency for less relapse in cases with major expansion was seen in group C. The mean expansion of the entire sample was 2.13 mm at the skeletal base, 1.11 mm in the premolar region, and 1.99 mm in the molar region. Mean relapses of 0.20 mm (9%) at the skeletal base, 0.76 mm (68%) in the premolar region, and 1.20 mm (60%) in the molar region were seen. Palatal bone grafts had no significant effect on the postsurgical changes in group A. Anterior and posterior downgrafting did not result in significantly more relapse. CONCLUSIONS: Surgical expansion of the maxilla provides stable results at the maxillary skeletal base but high relapse rates in the dentoalveolar area. Preoperative orthodontic expansion is one of the main sources of transverse relapse. Fixation of the palatal vault with resorbable plates is a possible technique to improve transverse stability. Larger samples are necessary to provide statistical significance.

Evaluation of Prognostic Factors for Palatal Fistulae after Cleft Lip and Palate Surgery in a North-Western Romanian Population over a 10-Year Period.

Cleft lip and palate is the most frequent birth anomaly, with increasing reported rates of complications, such as palate fistulae. Current studies concerning the occurrence rate of cleft lip and palate (CLP) report 2 to 10 cases in 10,000 births. The purpose of this study was to investigate the existence of factors that could predict the occurrence of fistulae after cleft lip and palate surgery. A retrospective study was performed by collecting and analyzing data from all patients who were operated for cleft lip and/or palate in the Maxillo-Facial Department of the Emergency Clinical County Hospital of Cluj-Napoca, Romania, between 2010 and 2020. We investigated the existing evidence for possible links between the number of fistulae observed after the primary palatoplasty and the age at which the primary palatoplasty was performed, the sex of the patient, the type of cleft, the timing of the surgical corrections, and the presence of comorbidities. A total of 137 cases were included for analysis. A significant link between the number of fistulae and the type of cleft was found (with fistulae occurring more frequently after the surgical correction of CLP-p < 0.001). No evidence was found for the existence of significant links between the number of fistulae and the patient's sex, the timing of surgery, or the presence of comorbidities. This study concluded that the incidence of palatal fistulae appears to be influenced by the type of cleft (CLP), but not by the sex of the patient, the timing of surgery, or the presence of comorbidities.