Scalable Design of Ru-Embedded Carbon Fabric Using Conventional Carbon Fiber Processing for Robust Electrocatalysts.

Metal-carbon composites are extensively utilized as electrochemical catalysts but face critical challenges in mass production and stability. We report a scalable manufacturing process for ruthenium surface-embedded fabric electrocatalysts (Ru-SFECs) via conventional fiber/fabric manufacturing. Ru-SFECs have excellent catalytic activity and stability toward the hydrogen evolution reaction, exhibiting a low overpotential of 11.9 mV at a current density of 10 mA cm-2 in an alkaline solution (1.0 M aq KOH solution) with only a slight overpotential increment (6.5%) after 10,000 cycles, whereas under identical conditions, that of commercial Pt/C increases 6-fold (from 1.3 to 7.8 mV). Using semipilot-scale equipment, a protocol is optimized for fabricating continuous self-supported electrocatalytic electrodes. Tailoring the fiber processing parameters (tension and temperature) can optimize the structural development, thereby achieving good catalytic performance and mechanical integrity. These findings underscore the significance of self-supporting catalysts, offering a general framework for stable, binder-free electrocatalytic electrode design.

Bioinspired Photothermal Metal-Organic Framework Cocrystal with Ultra-Fast Water Transporting Channels for Solar-Driven Interfacial Water Evaporation.

Herein, a bioinspired metal-organic framework (MOF) cocrystal produced from the co-assembly of a MOF [Ni3(hexaiminobenzene)2, Ni3(HIB)2] and p-chloranils (CHLs) is reported. Because of the 2D conjugation nature and the formation of persistent anion radicals, this cocrystal shows an excellent photothermal property, and is further used as an absorber in solar-driven interfacial water evaporation. The solar-driven interfacial water evaporation rate (4.04 kg m-2 h-1) is among the best compared with those of previously reported photothermal materials. Molecular dynamics simulation results suggested that the rotating of the CHL molecules relative to the MOF planes tuned the pore size to enable the ultra-fast water transporting, and thus ultra-high water transporting rates (1.11 × 1011 and 3.21 × 1011 H2O s-1 channel-1 at 298.2 and 323.0 K, respectively) for layered cocrystal structures, that are much higher than that of aquaporins (≈1.1 × 1010 H2O s-1 channel-1 at 298.2 K), are observed. The superior solar-driven water evaporation performance is thus attributed to the synergistic effect of the ultra-fast water transporting pores together with the excellent photothermal property of the cocrystal. This research provided a biomimetic strategy of rational design and production of charge transfer cocrystals to modulate their pores and photothermal properties for solar-driven interfacial water evaporation.

One-Pot Direct Mechanochemical Silicon Replacement of Sodium Fluorosilicate into Sodium Fluorozirconate and Functionalization of Graphite for Enhanced Sodium-Ion Storage.

Efficient sodium ion storage in graphite is as yet unattainable, because of the thermodynamic instability of sodium ion intercalates-graphite compounds. In this work, sodium fluorozirconate (Na3ZrF7, SFZ) functionalized graphite (SFZ-G) is designed and prepared by the in situ mechanochemical silicon (Si) replacement of sodium fluorosilicate (Na2SiF6, SFS) and functionalization of graphite at the same time. During the mechanochemical process, the atomic Si in SFS is directly replaced by atomic zirconium (Zr) from the zirconium oxide (ZrO2) balls and container in the presence of graphite, forming SFZ-G. The resulting SFZ-G, working as an anode material for sodium ion storage, shows a significantly enhanced capacity of 418.7 mAh g-1 at 0.1 C-rate, compared to pristine graphite (35 mAh g-1) and simply ball-milled graphite (BM-G, 200 mAh g-1). In addition, the SFZ-G exhibits stable sodium-ion storage performance with 86% of its initial capacity retention after 1000 cycles at 2.0 C-rate.

Simple Functionalization of a Donor Monomer to Enhance Charge Transfer in Porous Polymer Networks for Photocatalytic Hydrogen Evolution.

Porous polymer networks (PPNs) are promising candidates as photocatalysts for hydrogen production. Constructing a donor-acceptor structure is known to be an effective approach for improving photocatalytic activity. However, the process of how a functional group of a monomer can ensure photoexcited charges transfer and improve the hydrogen evolution rate (HER) has not yet been studied on the molecular level. Herein, we design and synthesize two kinds of triazatruxene (TAT)-based PPNs: TATR-PPN with a hexyl (R) group and TAT-PPN without the hexyl group, to understand the relationship between the presence of the functional group and charge transfer. The hexyl group on the TAT unit was found to ensure the transfer of photoexcited electrons from a donor unit to an acceptor unit and endowed the TATR-PPN with stable hydrogen production.

Out-of-Plane Single-Copper-Site Catalysts for Room-Temperature Benzene Oxidation.

Crafting single-atom catalysts (SACs) that possess "just right" modulated electronic and geometric structures, granting accessible active sites for direct room-temperature benzene oxidation is a coveted objective. However, achieving this goal remains a formidable challenge. Here, we introduce an innovative in situ phosphorus-immitting strategy using a new phosphorus source (phosphorus nitride, P3N5) to construct the phosphorus-rich copper (Cu) SACs, designated as Cu/NPC. These catalysts feature locally protruding metal sites on a nitrogen (N)-phosphorus (P)-carbon (C) support (NPC). Rigorous analyses, including X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS), validate the coordinated bonding of nitrogen and phosphorus with atomically dispersed Cu sites on NPC. Crucially, systematic first-principles calculations, coupled with the climbing image nudged-elastic-band (CI-NEB) method, provide a comprehensive understanding of the structure-property-activity relationship of the distorted Cu-N2P2 centers in Cu/NPC for selective oxidation of benzene to phenol production. Interestingly, Cu/NPC has shown more energetically favorable C-H bond activation compared to the benchmark Cu/NC SACs in the direct oxidation of benzene, resulting in outstanding benzene conversion (50.3 %) and phenol selectivity (99.3 %) at room temperature. Furthermore, Cu/NPC achieves a remarkable turnover frequency of 263 h-1 and mass-specific activity of 35.2 mmol g-1 h-1, surpassing the state-of-the-art benzene-to-phenol conversion catalysts to date.

Nanocatalytic Materials for Energy-Related Small-Molecules Conversions: Active Site Design, Identification and Structure-Performance Relationship Discovery.

The catalytic conversion of energy-related small-molecules is a critical process in the fields of chemical production, environmental restoration, and energy conversion and storage. Over the years, numerous nanocatalytic materials have been explored in efforts to substantially boost the inherently sluggish catalytic processes. Despite achievements, the lack of fundamental insights into the design and identification of active sites and the structure-performance relationship has been one of the main obstacles to further improvement in catalytic performance. With the development of first-principles density functional theory (DFT) calculations and state-of-art spectroscopic techniques, the pace of research has started to move forward again.In this Account, we illustrate our recent representative attempts to gain fundamental insights into the rational development of efficient nanocatalytic materials and thus boost the typical electrochemical and mechanochemical conversions of energy-related small-molecules, including for the hydrogen evolution reaction (HER), oxygen reduction reaction (ORR), and ammonia synthesis. DFT calculations and advanced spectroscopic techniques, such as synchrotron radiation-based X-ray absorption spectroscopy (XAS, hard and soft X-ray), were properly adopted for this purpose.Specifically, to achieve a fast-electrochemical hydrogen evolution process, Ir active sites with balanced hydrogen adsorption/desorption behaviors were first computationally designed via orbital modulation and experimentally identified, and they showed significantly enhanced catalytic activity toward HER in acidic media. For the electrochemical reduction of oxygen, well-designed Zn-N2 active sites and quinone functional groups were introduced into the different carbon matrixes and structurally identified by the XAS technique, utilizing hard and soft X-rays, respectively. Both experimental and DFT studies revealed that Zn-N2 active sites with their unique structure can greatly activate the adsorbed oxygen species, leading to a highly efficient and selective four-electron oxygen reduction pathway, while the quinone functional groups are able to modify the activation mode and alter it into a selective two-electron oxygen reduction pathway for H2O2 production.In another study, inspired by the dissociation of stable nitrogen molecules on the surface of Fe, dynamic strained Fe active sites were designed for mechanochemical ammonia synthesis. Combined XAS and Mössbauer spectroscopy revealed the formation of a short-range Fe4N structure by the Fe active sites and dissociated nitrogen during the ball milling process, facilitating robust hydrogenation and ammonia production under mild conditions.Thanks to the theoretical methods and advanced spectroscopic techniques, fundamental insights into the design and identification of active sites and understanding of the structure-performance relationship can be easily obtained using such tools, which will guide the development of nanocatalytic materials and boost the conversions of energy-related small-molecules for various applications.

Cobalt-Porphyrin-Based Covalent Organic Frameworks with Donor-Acceptor Units as Photocatalysts for Carbon Dioxide Reduction.

Covalent organic frameworks (COFs) have emerged as a promising platform for photocatalysts. Their crystalline porous nature allows comprehensive mechanistic studies of photocatalysis, which have revealed that their general photophysical parameters, such as light absorption ability, electronic band structure, and charge separation efficiency, can be conveniently tailored by structural modifications. However, further understanding of the relationship between structure-property-activity is required from the viewpoint of charge-carrier transport, because the charge-carrier property is closely related to alleviation of the excitonic effect. In the present study, COFs composed of a fixed cobalt (Co) porphyrin (Por) centered tetraamine as an acceptor unit with differently conjugated di-carbaldehyde based donor units, such as benzodithiophene (BDT), thienothiophene (TT), or phenyl (TA), were synthesized to form Co-Por-BDT, Co-Por-TT, or Co-Por-TA, respectively. Their photocatalytic activity for reducing carbon dioxide into carbon monoxide was in the order of Co-Por-BDT>Co-Por-TT>Co-Por-TA. The results indicated that the excitonic effect, associated with their charge-carrier densities and π-conjugation lengths, was a significant factor in photocatalysis performance.

Benzotrithiophene-based Covalent Organic Framework Photocatalysts with Controlled Conjugation of Building Blocks for Charge Stabilization.

Covalent organic frameworks have recently shown high potential for photocatalytic hydrogen production. However, their structure-property-activity relationship has not been sufficiently explored to identify a research direction for structural design. Herein, we report the design and synthesis of four benzotrithiophene (BTT)-based covalent organic frameworks (COFs) with different conjugations of building units, and their photocatalytic activity for hydrogen production. All four BTT-COFs had slipped parallel stacking patterns with high crystallinity and specific surface areas. The change in the degree of conjugation was found to rationally tune the rate of photocatalytic hydrogen evolution. Based on the experimental and calculation results, the tunable photocatalytic performance could be mainly attributed to the electron affinity and charge trapping of the electron accepting units. This study provides important insights for designing covalent organic frameworks for efficient photocatalysts.

Olefin-Linked Covalent Organic Frameworks with Electronegative Channels as Cationic Highways for Sustainable Lithium Metal Battery Anodes.

Despite the enormous interest in Li metal as an ideal anode material, the uncontrollable Li dendrite growth and unstable solid electrolyte interphase have plagued its practical application. These limitations can be attributed to the sluggish and uneven Li+ migration towards Li metal surface. Here, we report olefin-linked covalent organic frameworks (COFs) with electronegative channels for facilitating selective Li+ transport. The triazine rings and fluorinated groups of the COFs are introduced as electron-rich sites capable of enhancing salt dissociation and guiding uniform Li+ flux within the channels, resulting in a high Li+ transference number (0.85) and high ionic conductivity (1.78 mS cm-1 ). The COFs are mixed with a polymeric binder to form mixed matrix membranes. These membranes enable reliable Li plating/stripping cyclability over 700 h in Li/Li symmetric cells and stable capacity retention in Li/LiFePO4 cells, demonstrating its potential as a viable cationic highway for accelerating Li+ conduction.

Hexaazatriphenylene-Based Two-Dimensional Conductive Covalent Organic Framework with Anisotropic Charge Transfer.

The development of covalent organic frameworks (COFs) with efficient charge transport is of immense interest for applications in optoelectronic devices. To enhance COF charge transport properties, electroactive building blocks and dopants can be used to induce extended conduction channels. However, understanding their intricate interplay remains challenging. We designed and synthesized a tailor-made COF structure with electroactive hexaazatriphenylene (HAT) core units and planar dioxin (D) linkages, denoted as HD-COF. With the support of theoretical calculations, we found that the HAT units in the HD-COF induce strong, eclipsed π-π stacking. The unique stacking of HAT units and the weak in-plane conjugation of dioxin linkages leads to efficient anisotropic charge transport. We fabricated HD-COF films to minimize the grain boundary effect of bulk COFs, which resulted in enhanced conductivity. As a result, the HD-COF films showed an electrical conductivity as high as 1.25 S cm-1 after doping with tris(4-bromophenyl)ammoniumyl hexachloroantimonate.

Conductive and Ultrastable Covalent Organic Framework/Carbon Hybrid as an Ideal Electrocatalytic Platform.

Developing covalent organic frameworks (COFs) with good electrical conductivity is essential to widen their range of practical applications. Thermal annealing is known to be a facile approach for enhancing conductivity. However, at higher temperatures, most COFs undergo amorphization and/or thermal degradation because of the lack of linker rigidity and physicochemical stability. Here, we report the synthesis of a conductive benzoxazole-linked COF/carbon hybrid material (BCOF-600C) by simple thermal annealing. The fused-aromatic benzoxazole and biphenyl building units endow the resulting COF with excellent physicochemical stability against high temperatures and strong acids/bases. This allows heat treatment to further enhance electrical conductivity with minimal structural alteration. The robust crystalline structure with periodically incorporated nitrogen atoms allowed platinum (Pt) atoms to be atomically integrated into the channel walls of BCOF-600C. The resulting electrocatalyst with well-defined active sites exhibited superior catalytic performance toward hydrogen evolution in acidic media.

Crystalline Porphyrazine-Linked Fused Aromatic Networks with High Proton Conductivity.

Fused aromatic networks (FANs) have been studied in efforts to overcome the low physicochemical stability of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), while preserving crystallinity. Herein, we describe the synthesis of a highly stable and crystalline FAN (denoted as Pz-FAN) using pyrazine-based building blocks to form porphyrazine (Pz) linkages via an irreversible reaction. Unlike most COFs and FANs, which are synthesized from two different building blocks, the new Pz-FAN is formed using a single building block by self-cyclotetramerization. Controlled and optimized reaction conditions result in a highly crystalline Pz-FAN with physicochemical stability. The newly prepared Pz-FAN displayed a high magnitude (1.16×10-2  S cm-1 ) of proton conductivity compared to other reported FANs and polymers. Finally, the Pz-FAN-based membrane was evaluated for a proton-exchange membrane fuel cell (PEMFC), which showed maximum power and current densities of 192 mW cm-2 and 481 mA cm-2 , respectively.

Extreme Enhancement of Carbon Hydrogasification via Mechanochemistry.

Carbon hydrogasification is the slowest reaction among all carbon-involved small-molecule transformations. Here, we demonstrate a mechanochemical method that results in both a faster reaction rate and a new synthesis route. The reaction rate was dramatically enhanced by up to 4 orders of magnitude compared to the traditional thermal method. Simultaneously, the reaction exhibited very high selectivity (99.8 % CH4 , versus 80 % under thermal conditions) with a cobalt catalyst. Our study demonstrated that this extreme increase in reaction rate originates from the continuous activation of reactive carbon species via mechanochemistry. The high selectivity is intimately related to the activation at low temperature, at which higher hydrocarbons are difficult to form. This work is expected to advance studies of carbon hydrogasification, and other solid-gas reactions.

Synthesis of Saddle-Shape Octaaminotetraphenylene Octahydrochloride.

Apart from being experimentally and theoretically interesting, tetraphenylene has potential applications in different fields, including supramolecular chemistry, material science, and asymmetric catalysis. Although a wide range of substituted tetraphenylenes have been reported, octaamine-based tetraphenylene derivatives have not been reported because of their instability. Here, stable octaaminotetraphenylene octahydrochloride is synthesized from the bromination of tetraphenylene to octabromotetraphenylene, which is subsequently aminated into octaiminotetraphenylene. Finally, the imino derivative is deprotected to yield octaaminotetraphenylene octahydrochloride.

Catalyst- and Solvent-Free Synthesis of a Chemically Stable Aza-Bridged Bis(phenanthroline) Macrocycle-Linked Covalent Organic Framework.

Developing new linkage-based covalent organic frameworks (COFs) is one of the major topics in reticular chemistry. Electrically conductive COFs have enabled applications in energy storage and electrochemical catalysis, which are not feasible using insulating COFs. Despite significant advances, the construction of chemically stable conductive COFs by the formation of new linkages remains relatively unexplored and challenging. Here we report the solvent- and catalyst-free synthesis of a two-dimensional aza-bridged bis(phenanthroline) macrocycle-linked COF (ABBPM-COF) from the thermally induced poly-condensation of a tri-topic monomer and ammonia gas. The ABBPM-COF structure was elucidated using multiple techniques, including X-ray diffraction analysis combined with structural simulation, revealing its crystalline nature with an ABC stacking mode. Further experiments demonstrated its excellent chemical stability in acid/base solutions. Electrical-conductivity measurements showed that the insulating ABBPM-COF becomes a semiconducting material after exposure to iodine vapor.

Revealing Isolated M-N3 C1 Active Sites for Efficient Collaborative Oxygen Reduction Catalysis.

Single atom catalysts (SACs) are of great importance for oxygen reduction, a critical process in renewable energy technologies. The catalytic performance of SACs largely depends on the structure of their active sites, but explorations of highly active structures for SAC active sites are still limited. Herein, we demonstrate a combined experimental and theoretical study of oxygen reduction catalysis on SACs, which incorporate M-N3 C1 site structure, composed of atomically dispersed transition metals (e.g., Fe, Co, and Cu) in nitrogenated carbon nanosheets. The resulting SACs with M-N3 C1 sites exhibited prominent oxygen reduction catalytic activities in both acidic and alkaline media, following the trend Fe-N3 C1 > Co-N3 C1 > Cu-N3 C1 . Theoretical calculations suggest the C atoms in these structures behave as collaborative adsorption sites to M atoms, thanks to interactions between the d/p orbitals of the M/C atoms in the M-N3 C1 sites, enabling dual site oxygen reduction.

Converting Unstable Imine-Linked Network into Stable Aromatic Benzoxazole-Linked One via Post-oxidative Cyclization.

Efficiently converting unstable linkages into stable linkages is an important objective in the chemistry of covalent organic frameworks (COFs), because it enhances stability and preserves crystallinity. Here, an unstable imine-linked COF was converted into a stable aromatic benzoxazole-linked COF (BO-COF) via post-oxidative cyclization, based on chemistry used to form fused-aromatic ladder-like rigid-rod polymers. The structure of the porous BO-COF was confirmed by transmission electron microscopy, infrared and solid-state nuclear magnetic resonance spectroscopies, powder X-ray diffraction patterns, and nitrogen adsorption-desorption isotherms. The efficient post-treatment of an unstable reversible COF converted it into a stable irreversible COF, which had significantly improved thermal and chemical stabilities as well as high crystallinity. This strategy can be universally applied for the synthesis of stable fused-aromatic COFs, expanding their practical applications.

Two-dimensional polyaniline (C3N) from carbonized organic single crystals in solid state.

The formation of 2D polyaniline (PANI) has attracted considerable interest due to its expected electronic and optoelectronic properties. Although PANI was discovered over 150 y ago, obtaining an atomically well-defined 2D PANI framework has been a longstanding challenge. Here, we describe the synthesis of 2D PANI via the direct pyrolysis of hexaaminobenzene trihydrochloride single crystals in solid state. The 2D PANI consists of three phenyl rings sharing six nitrogen atoms, and its structural unit has the empirical formula of C3N. The topological and electronic structures of the 2D PANI were revealed by scanning tunneling microscopy and scanning tunneling spectroscopy combined with a first-principle density functional theory calculation. The electronic properties of pristine 2D PANI films (undoped) showed ambipolar behaviors with a Dirac point of -37 V and an average conductivity of 0.72 S/cm. After doping with hydrochloric acid, the conductivity jumped to 1.41 × 10(3) S/cm, which is the highest value for doped PANI reported to date. Although the structure of 2D PANI is analogous to graphene, it contains uniformly distributed nitrogen atoms for multifunctionality; hence, we anticipate that 2D PANI has strong potential, from wet chemistry to device applications, beyond linear PANI and other 2D materials.

Paramagnetic Carbon Nanosheets with Random Hole Defects and Oxygenated Functional Groups.

Ordered graphitic carbon nanosheets (GCNs) were, for the first time, synthesized by the direct condensation of multifunctional phenylacetyl building blocks (monomers) in the presence of phosphorous pentoxide. The GCNs had highly ordered structures with random hole defects and oxygenated functional groups, showing paramagnetism. The results of combined structural and magnetic analyses indicate that the hole defects and functional groups are associated with the appearance and stabilization of unpaired spins. DFT calculations further suggest that the emergence of stabilized spin moments near the edge groups necessitates the presence of functionalized carbon atoms around the hole defects. That is, both hole defects and oxygenated functional groups are essential ingredients for the generation and stabilization of spins in GCNs.

Defect-Free Encapsulation of Fe0 in 2D Fused Organic Networks as a Durable Oxygen Reduction Electrocatalyst.

Because they provide lower cost but comparable activity to precious platinum (Pt)-based catalysts, nonprecious iron (Fe)-based materials, such as Fe/Fe3C and Fe-N-C, have gained considerable attention as electrocatalysts for the oxygen reduction reaction (ORR). However, their practical application is hindered by their poor stability, which is attributed to the defective protection of extremely unstable Fe nanoparticles. Here, we introduce a synthesis strategy for a stable Fe-based electrocatalyst, which was realized by defect-free encapsulation of Fe nanoparticles using a two-dimensional (2D) phenazine-based fused aromatic porous organic network (Aza-PON). The resulting Fe@Aza-PON catalyst showed electrocatalytic activity (half-wave potential, 0.839 V; Tafel slope, 60 mV decade-1) comparable to commercial Pt on activated carbon (Pt/C, 0.826 V and 90 mV decade-1). More importantly, the Fe@Aza-PON displayed outstanding stability (zero current loss even after 100 000 cycles) and tolerance against contamination (methanol and CO poisoning). In a hybrid Li-air battery test, the Fe@Aza-PON demonstrated performance superior to Pt/C.