On the Bioconvective Aspect of Viscoelastic Micropolar Nanofluid Referring to Variable Thermal Conductivity and Thermo-Diffusion Characteristics.

The bioconvective flow of non-Newtonian fluid induced by a stretched surface under the aspects of combined magnetic and porous medium effects is the main focus of the current investigation. Unlike traditional aspects, here the viscoelastic behavior has been examined by a combination of both micropolar and second grade fluid. Further thermophoresis, Brownian motion and thermodiffusion aspects, along with variable thermal conductivity, have also been utilized for the boundary process. The solution of the nonlinear fundamental flow problem is figured out via convergent approach via Mathematica software. It is noted that this flow model is based on theoretical flow assumptions instead of any experimental data. The efficiency of the simulated solution has been determined by comparing with previously reported results. The engineering parameters' effects are computationally evaluated for some definite range.

Thermal stable properties of solid hybrid nanoparticles for mixed convection flow with slip features.

Following to improved thermal impact of hybrid nanomaterials, wide range applications of such materials is observed in the thermal engineering, extrusion systems, solar energy, power generation, heat transfer devices etc. The hybrid nanofluid is a modified form of nanofluid which is beneficial for improving energy transfer efficiency. In current analysis, the solid nanoparticles aluminium ([Formula: see text]) and copper ([Formula: see text]) have been mixed with water to produce a new hybrid nanofluid. The investigation of a steady two-dimensional mixed convection boundary layer flow of the resultant hybrid nanofluid on a vertical exponential shrunk surface in the existence of porous, magnetic, thermal radiation, velocity, and thermal slip conditions is carried out. Exponential similarity variables are adopted to transform the nonlinear partial differential equation into a system of ordinary differential equations which has been then solved by employing the shooting method in Maple software. The obtained numerical results such as coefficient of skin friction [Formula: see text], heat transfer rate [Formula: see text], velocity [Formula: see text] and temperature [Formula: see text] distributions are presented in the form of different graphs. The results revealed that duality exists in solution when the suction parameter [Formula: see text] in assisting flow case. Due to non-uniqueness of solutions, a temporal stability analysis needs to be performed and the result indicates that the upper branch is stable and realizable compared to the lower branch.

Numerical Computation for Gyrotactic Microorganisms in MHD Radiative Eyring-Powell Nanomaterial Flow by a Static/Moving Wedge with Darcy-Forchheimer Relation.

The intention of this study is to carry out a numerical investigation of time-dependent magneto-hydro-dynamics (MHD) Eyring-Powell liquid by taking a moving/static wedge with Darcy-Forchheimer relation. Thermal radiation was taken into account for upcoming solar radiation, and the idea of bioconvection is also considered for regulating the unsystematic exertion of floating nanoparticles. The novel idea of this work was to stabilized nanoparticles through the bioconvection phenomena. Brownian motion and thermophoresis effects are combined in the most current revision of the nanofluid model. Fluid viscosity and thermal conductivity that depend on temperature are predominant. The extremely nonlinear system of equations comprising partial differential equations (PDEs) with the boundary conditions are converted into ordinary differential equations (ODEs) through an appropriate suitable approach. The reformed equations are then operated numerically with the use of the well-known Lobatto IIIa formula. The variations of different variables on velocity, concentration, temperature and motile microorganism graphs are discussed as well as force friction, the Nusselt, Sherwood, and the motile density organism numbers. It is observed that Forchheimer number Fr decline the velocity field in the case of static and moving wedge. Furthermore, the motile density profiles are deprecated by higher values of the bio convective Lewis number and Peclet number. Current results have been related to the literature indicated aforementioned and are found to be great achievement.

Significance of Convection and Internal Heat Generation on the Thermal Distribution of a Porous Dovetail Fin with Radiative Heat Transfer by Spectral Collocation Method.

A variety of methodologies have been used to explore heat transport enhancement, and the fin approach to inspect heat transfer characteristics is one such effective method. In a broad range of industrial applications, including heat exchangers and microchannel heat sinks, fins are often employed to improve heat transfer. Encouraged by this feature, the present research is concerned with the temperature distribution caused by convective and radiative mechanisms in an internal heat-generating porous longitudinal dovetail fin (DF). The Darcy formulation is considered for analyzing the velocity of the fluid passing through the fin, and the Rosseland approximation determines the radiation heat flux. The heat transfer problem of an inverted trapezoidal (dovetail) fin is governed by a second-order ordinary differential equation (ODE), and to simplify it to a dimensionless form, nondimensional terms are utilized. The generated ODE is numerically solved using the spectral collocation method (SCM) via a local linearization approach. The effect of different physical attributes on the dimensionless thermal field and heat flux is graphically illustrated. As a result, the temperature in the dovetail fin transmits in a decreasing manner for growing values of the porosity parameter. For elevated values of heat generation and the radiation-conduction parameter, the thermal profile of the fin displays increasing behavior, whereas an increment in the convection-conduction parameter downsizes the thermal dispersal. It is found that the SCM technique is very effective and more conveniently handles the nonlinear heat transfer equation. Furthermore, the temperature field results from the SCM-based solution are in very close accordance with the outcomes published in the literature.

Cattaneo-Christov Double Diffusion (CCDD) on Sutterby Nanofluid with Irreversibility Analysis and Motile Microbes Due to a RIGA Plate.

In this article, a Riga plate is exhibited with an electric magnetization actuator consisting of permanent magnets and electrodes assembled alternatively. This Riga plate creates an electric and magnetic field, where a transverse Lorentz force is generated that contributes to the flow along the plate. A new study field has been created by Sutterby nanofluid flows down the Riga plate, which is crucial to the creation of several industrial advancements, including thermal nuclear reactors, flow metres, and nuclear reactor design. This article addresses the second law analysis of MHD Sutter by nanofluid over a stretching sheet with the Riga plate. The Cattaneo-Christov Double Diffusion heat and mass flux have been created to examine the behaviour of relaxation time. The bioconvection of motile microorganisms and chemical reactions are taken into consideration. Similarity transformations are used to make the governing equations non-dimensional ordinary differential equations (ODE's) that are subsequently solved through an efficient and powerful analytic technique, the homotopy analysis method (HAM). The effect of pertained variables on velocity, temperature, concentration, and motile microorganism distributions are elaborated through the plot in detail. Further, the velocity distribution enhances and reduces for greater value Deborah number and Reynold number for the two cases of pseudoplastic and dilatant flow. Microorganism distribution decreases with the augmented magnitude of Peclet number (Pe), Bioconvection Lewis number (Lb), and microorganism concentration difference number (ϖ). The entropy production distribution is increased for the greater estimations of the Reynolds number (ReL) and Brinkman parameter (Br). Two sets of graphical outputs are presented for the Sutterby fluid parameter. Finally, for the justification of these outcomes, tables of comparison are made with various variables.

Nonlinear Thermal Diffusion and Radiative Stagnation Point Flow of Nanofluid with Viscous Dissipation and Slip Constrains: Keller Box Framework Applications to Micromachines.

The radiated flow of magnetized viscous fluid subject to the viscous dissipation phenomenon is numerically studied. The radiative phenomenon is addressed with nonlinear relations. Further, analysis is performed by using the slip effects and convective thermal flow constraints. The transformed problem is numerically evaluated using the Keller Box method. The physical parameter effects, such as the magnetic parameter for the velocity profile, Prandtl number, Brownian motion parameter and Biot number for the energy profile and Lewis number, and the thermophoresis parameter for the concentration profile are discussed. The obtained results suggest applications in enhancing the heat transfer phenomenon, thermal system, energy generation, heat transmission devices, power generation, chemical reactions, etc.

The minimality of mean square error in chirp approximation using fractional fourier series and fractional fourier transform.

Chirps are familiar in nature, have a built-in resistance to noise and interference, and are connected to a wide range of highly oscillatory processes. Detecting chirp oscillating patterns by traditional Fourier series is challenging because the chirp frequencies constantly change over time. Estimating such types of functions considering the partial sums of a Fourier series in Fourier analysis does not permit an approximate solution, which entails more Fourier coefficients required for signal reconstruction. The standard Fourier series, therefore, has a poor convergence rate and is an inadequate approximation. In this study, we use a parameterized orthonormal basis with an adjustable parameter to match the oscillating behavior of the chirp to approximate linear chirps using the partial sums of a generalized Fourier series known as fractional Fourier series, which gives the best approximation with only a small number of fractional Fourier coefficients. We used the fractional Fourier transform to compute the fractional Fourier coefficients at sample points. Additionally, we discover that the fractional parameter has the best value at which fractional Fourier coefficients of zero degrees have the most considerable magnitude, leading to the rapid decline of fractional Fourier coefficients of high degrees. Furthermore, fractional Fourier series approximation with optimal fractional parameters provides the minimum mean square error over the fractional Fourier parameter domain.