RESUMEN
The bacterial cellulose membrane (CM) is a promising biomaterial due to its easy applicability and moist environment. Moreover, nanoscale silver compounds (AgNO3) are synthesized and incorporated into CMs to provide these biomaterials with antimicrobial activity for wound healing. This study aimed to evaluate the cell viability of CM incorporated with nanoscale silver compounds, determine the minimum inhibitory concentration (MIC) for Escherichia coli and Staphylococcus aureus, and its use on in vivo skin lesions. Wistar rats were divided according to treatment: untreated, CM (cellulose membrane), and AgCM (CM incorporated with silver nanoparticles). The euthanasia was performed on the 2nd, 7th, 14th, and 21st days to assess inflammation (myeloperoxidase-neutrophils, N-acetylglucosaminidase-macrophage, IL-1ß, IL-10), oxidative stress (NO-nitric oxide, DCF-H2O2), oxidative damage (carbonyl: membrane's damage; sulfhydryl: membrane's integrity), antioxidants (superoxide dismutase; glutathione), angiogenesis, tissue formation (collagen, TGF-ß1, smooth muscle α-actin, small decorin, and biglycan proteoglycans). The use of AgCM did not show toxicity, but antibacterial effect in vitro. Moreover, in vivo, AgCM provided balanced oxidative action, modulated the inflammatory profile due to the reduction of IL-1ß level and increase in IL-10 level, in addition to increased angiogenesis and collagen formation. The results suggest the use of silver nanoparticles (AgCM) enhanced the CM properties by providing antibacterial properties, modulation the inflammatory phase, and consequently promotes the healing of skin lesions, which can be used clinically to treat injuries.
Asunto(s)
Interleucina-10 , Nanopartículas del Metal , Ratas , Animales , Interleucina-10/farmacología , Plata/farmacología , Celulosa , Peróxido de Hidrógeno/farmacología , Ratas Wistar , Cicatrización de Heridas , Antibacterianos/farmacología , Bacterias , Colágeno/farmacología , Modelos AnimalesRESUMEN
The reuse of açaí seeds is an organic approach for valorizing biomass, encouraging the public policies of circular economy, which reduces the human impact on the production chain processes. This research proposes an alternative for açaí seed as a filler in castor oil-based polyurethane, obtaining eco-sorbent to evaluate the sorption capacity for another impactful food industry by-product: waste cooking oil (WCO). Eco-sorbents were obtained with castor oil based-polyol and isocyanate (MDI) by mass mixing equal to 1:1 (OH:NCO), reinforced with açaí seed residue (5-20 wt%). The samples were characterized by techniques scanning electron microscopy (SEM), optical microscopy (OM), apparent density, contact angle, infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). Sorption capacity and efficiency were evaluated as a function of the fiber content, with tests performed in times of 30-180 s in two systems: oil and oil/water. The results showed that the eco-sorbents had a hydrophobic nature (θ > 98.3°) and macroporous morphology (pore size from 152 to 119 µm), which allowed the adsorption of residual cooking oil by the porous structure. The kinetics study showed that the sample with greater fiber content (15% wt.) reached the equilibrium in a short time compared to the neat PU for the oil system, with a sorption capacity of 9.50 g g-1 in the first 30 s. For the oil/water system, an opposite behavior could be observed, with a sorption capacity of 9.98 g g-1 in the 150 s equilibrium time. The Langmuir isotherm model presented a maximum adsorption capacity of 10.42 g g-1. However, the Freundlich isotherm model had a better fit to the experimental data with R2 (0.97) and lower chi-square (0.159), showing favorable adsorption (n = 1.496). Thus, it was proved that the weak interactions (connection H) and the binding energy of the predominant physisorption for the oil/water system. Thus, developed eco-sorbents are an excellent option for the sorption of WCO.
Asunto(s)
Aceite de Ricino , Contaminantes Químicos del Agua , Adsorción , Biomasa , Culinaria , Humanos , Concentración de Iones de Hidrógeno , Cinética , Contaminantes Químicos del Agua/análisisRESUMEN
Leishmaniasis, caused by Leishmania parasites, is a neglected tropical disease and Cutaneous Leishmaniasis (CL) is the most common form. Despite the associated toxicity and adverse effects, Meglumine antimoniate (MA) remains the first-choice treatment for CL in Brazil, pressing the need for the development of better alternatives. Bacterial NanoCellulose (BNC), a biocompatible nanomaterial, has unique properties regarding wound healing. In a previous study, we showed that use of topical BNC + systemic MA significantly increased the cure rate of CL patients, compared to treatment with MA alone. Herein, we performed a study comparing the combination of a wound dressing (BNC or placebo) plus systemic MA versus systemic MA alone, in CL caused by Leishmania braziliensis. We show that patients treated with the combination treatment (BNC or placebo) + MA showed improved cure rates and decreased need for rescue treatment, although differences compared to controls (systemic MA alone) were not significant. However, the overall time-to-cure was significantly lower in groups treated with the combination treatment (BNC+ systemic MA or placebo + systemic MA) in comparison to controls (MA alone), indicating that the use of a wound dressing improves CL treatment outcome. Assessment of the immune response in peripheral blood showed an overall downmodulation in the inflammatory landscape and a significant decrease in the production of IL-1a (p < 0.05) in patients treated with topical BNC + systemic MA. Our results show that the application of wound dressings to CL lesions can improve chemotherapy outcome in CL caused by L. braziliensis.
RESUMEN
Biopolymers such as carboxymethyl cellulose and hyaluronic acid are alternative substrates for conformable organic light-emitting diodes (OLEDs). However, drawbacks such as mechanical stress susceptibility can hinder the device's performance under stretched conditions. To overcome these limitations, herein, we developed a nanocomposite based on CMC/HA (carboxymethyl cellulose/hyaluronic acid) and synthetic Laponite, intending to improve the mechanical strength without compromising the film flexibility and transparency (transmittance >80%; 380-700 nm) as substrates for conformable OLEDs. From XRD, FTIR, CP-MAS NMR, and TGA/DTG characterization techniques, it was possible to conclude the presence of Laponite randomly dispersed between the polymer chains. CMC/HA with 5% (w/w) Laponite, CMC/HA 5, presented a higher tensile strength (370.6 MPa) and comparable Young's modulus (51.0 ± 1.2 MPa) in comparison to the nanocomposites and pristine films, indicating a better candidate for the device's substrates. To produce the OLED, the multilayer structure ITO/MoO3/NPB/TCTA:Ir(ppy)3/TPBi:Ir(ppy)3/BPhen/LiF was deposited onto the CMC/HA 5 substrate. The OLEDs fabricated using CMC/HA 5 substrates showed higher luminance (12 kcd/m2) and irradiance (0.9 mW/cm2) values when compared with those based on commercial bacterial cellulose. However, the same device presented a lower efficiency (3.2 cd/A) due to a higher current density. Moreover, the OLED fabricated onto the Laponite-modified biopolymer presented reproducible behavior when submitted to continuous bending stress. Thus, CMC/HA 5 demonstrates potential as a transparent conductor substrate for biopolymer-based OLEDs with comparable performance to commercial bacterial cellulose features.
RESUMEN
In the original publication [...].
RESUMEN
In this work, scaffolds based on poly(hydroxybutyrate) (PHB) and micronized bacterial cellulose (BC) were produced through 3D printing. Filaments for the printing were obtained by varying the percentage of micronized BC (0.25, 0.50, 1.00, and 2.00%) inserted in relation to the PHB matrix. Despite the varying concentrations of BC, the biocomposite filaments predominantly contained PHB functional groups, as Fourier transform infrared spectroscopy (FTIR) demonstrated. Thermogravimetric analyses (i.e., TG and DTG) of the filaments showed that the peak temperature (Tpeak) of PHB degradation decreased as the concentration of BC increased, with the lowest being 248 °C, referring to the biocomposite filament PHB/2.0% BC, which has the highest concentration of BC. Although there was a variation in the thermal behavior of the filaments, it was not significant enough to make printing impossible, considering that the PHB melting temperature was 170 °C. Biological assays indicated the non-cytotoxicity of scaffolds and the provision of cell anchorage sites. The results obtained in this research open up new paths for the application of this innovation in tissue engineering.
RESUMEN
We review the recent progress that have led to the development of porous materials based on cellulose nanostructures found in plants and other resources. In light of the properties that emerge from the chemistry, shape and structural control, we discuss some of the most promising uses of a plant-based material, nanocellulose, in regenerative medicine. Following a brief discussion about the fundamental aspects of self-assembly of nanocellulose precursors, we review the key strategies needed for material synthesis and to adjust the architecture of the materials (using three-dimensional printing, freeze-casted porous materials, and electrospinning) according to their uses in tissue engineering, artificial organs, controlled drug delivery and wound healing systems, among others. For this purpose, we map the structure-property-function relationships of nanocellulose-based porous materials and examine the course of actions that are required to translate innovation from the laboratory to industry. Such efforts require attention to regulatory aspects and market pull. Finally, the key challenges and opportunities in this nascent field are critically reviewed.
RESUMEN
This study reports the fabrication of polymeric matrices through electrospinning using polymethyl methacrylate (PMMA) and poly(lactic-co-glycolic acid) (PLGA), biocompatible polymers commonly used in medical systems. These polymers were combined with an antibacterial drug, sulfadiazine sodium salt (SDS) or its supramolecular system formed with hydroxypropyl-ß-cyclodextrin (HPß/CD) at 1:1 molar ratio, aiming to assemble a transdermal drug delivery system. The formation of fibers was confirmed by scanning electron microscopy (SEM), and the fibers' surface properties were analyzed using contact angle and water vapor permeability techniques. Drug release tests and cell viability assays were performed to evaluate the potential toxicity of the material. SEM images demonstrated that the obtained fibers had nanoscale- and micrometer-scale diameters in PLGA and PMMA systems, respectively. The contact angle analyses indicated that, even in the presence of hydrophilic molecules (SDS and HPßCD), PMMA fibers exhibited hydrophobic characteristics, while PLGA fibers exhibited hydrophilic surface properties. These data were also confirmed by water vapor permeability analysis. The drug release profiles demonstrated a greater release of SDS in the PLGA system. Moreover, the presence of HPßCD improved the drug release in both polymeric systems and the cell viability in the PMMA SDS/HPßCD system. In terms of antibacterial activity, all membranes yielded positive outcomes; nevertheless, the PLGA SDS/HPßCD membrane exhibited the most remarkable results, with the lowest microbial load values. Additionally, the pseudo wound healing analysis demonstrated that the PLGA SDS/HPßCD fiber exhibited results similar to the control group. Consequently, these findings exemplify the substantial potential of the obtained materials for use in wound healing applications.
RESUMEN
Considered a simple and versatile technique, electrospinning has emerged as a technology for developing 3D materials for a wide range of applications [...].
RESUMEN
The treatment of cutaneous leishmaniasis (CL) in Brazil using pentavalent antimony (Sbv) is associated with a high failure rate and long time to heal. Moreover, standard Sbv treatment cures only 50-60% of the cases. In this pilot clinical trial, we evaluated the topical use of bacterial cellulose (BC) bio-curatives + Sbv in the treatment of CL caused by L. braziliensis, in Bahia, Brazil. A total of 20 patients were randomized in two groups assigned to receive either parenteral Sbv alone or parenteral Sbv plus topically applied BC bio-curatives. CL patients treated with Sbv + topical BC bio-curatives had a significantly higher cure rate at 60 days post initiation of treatment compared to CL patients treated with Sbv alone (P=0.01). At day 90 post initiation of treatment, cure rate was similar in the two groups as was overall healing time. Adverse effects or local reactions to topical BC application were not observed. This pilot trial shows that the potential use of a combined therapy consisting of topical BC bio-curatives and parenteral Sbv in favoring healing of CL lesions caused by L. braziliensis, at an early time point.
Asunto(s)
Antiprotozoarios , Leishmania braziliensis , Leishmaniasis Cutánea , Administración Tópica , Antiprotozoarios/uso terapéutico , Celulosa/uso terapéutico , Quimioterapia Combinada , Humanos , Leishmaniasis Cutánea/tratamiento farmacológicoRESUMEN
In recent years, nanoparticulate materials have aroused interest in the field of organic electronics due to their high versatility which increases the efficiency of devices. In this work, four different stable conformations based on the organic semiconductors P3HT and PC71BM were synthesized using the nanoprecipitation method, including blend and core-shell nanoparticles. All nanoparticles were obtained free of surfactants and in aqueous suspensions following the line of ecologically correct routes. The structural and optoelectronic properties of the nanoparticles were investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), UV-visible absorption spectroscopy and UV-visible photoluminescence (PL). Even in aqueous media, the blend and core-shell nanoparticles exhibited a greater light absorption capacity, and these conformations proved to be effective in the process of dissociation of excitons that occurs at the P3HT donor/PC71BM acceptor interface. With all these characteristics and allied to the fact that the nanoparticles are surfactant-free aqueous suspensions, this work paves the way for the use of these colloids as a photoactive layer of organic photovoltaic devices that interface with biological systems.
RESUMEN
Edible films have been studied mainly as primary packaging materials, but they may be used as barrier layers between food components, e.g., by reducing the moisture migration between components with contrasting water activities. Since edible films are part of the food itself, components adding sensory appeal (e.g., fruit purees) are usually desirable. The objective of this study was to develop a film to be applied as a moisture barrier between nachos and guacamole. Ten film formulations were prepared according to a simplex centroid design with three components-a polysaccharide matrix (consisting of a 5:1 mixture of bacterial cellulose-BC-and carboxymethyl cellulose), tomato puree (for sensory appeal), and palm olein (to reduce hydrophilicity)-and produced by bench casting. The film with the highest palm olein content (20%) presented the lowest water vapor permeability, and its formulation was used to produce a film by continuous casting. The film was applied as a layer between nachos and guacamole, and presented to 80 panelists. The film-containing snack was preferred and considered as crispier when compared to the snack without the film, suggesting that the film was effective in reducing the moisture migration from the moist guacamole to the crispy nachos.
RESUMEN
Low-cost sensors to detect cancer biomarkers with high sensitivity and selectivity are essential for early diagnosis. Herein, an immunosensor was developed to detect the cancer biomarker p53 antigen in MCF7 lysates using electrical impedance spectroscopy. Interdigitated electrodes were screen printed on bacterial nanocellulose substrates, then coated with a matrix of layer-by-layer films of chitosan and chondroitin sulfate onto which a layer of anti-p53 antibodies was adsorbed. The immunosensing performance was optimized with a 3-bilayer matrix, with detection of p53 in MCF7 cell lysates at concentrations between 0.01 and 1000 Ucell. mL-1, and detection limit of 0.16 Ucell mL-1. The effective buildup of the immunosensor on bacterial nanocellulose was confirmed with polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and surface energy analysis. In spite of the high sensitivity, full selectivity with distinction of the p53-containing cell lysates and possible interferents required treating the data with a supervised machine learning approach based on decision trees. This allowed the creation of a multidimensional calibration space with 11 dimensions (frequencies used to generate decision tree rules), with which the classification of the p53-containing samples can be explained.
Asunto(s)
Técnicas Biosensibles , Neoplasias , Biomarcadores de Tumor/análisis , Espectroscopía Dieléctrica , Electrodos , InmunoensayoRESUMEN
Photonic materials featuring simultaneous iridescence and light emission are an attractive alternative for designing novel optical devices. The luminescence study of a new optical material that integrates light emission and iridescence through liquid crystal self-assembly of cellulose nanocrystal-template silica approach is herein presented. These materials containing Rhodamine 6G were obtained as freestanding composite films with a chiral nematic organization. The scanning electron microscopy confirms that the cellulose nanocrystal film structure comprises multi-domain Bragg reflectors and the optical properties of these films can be tuned through changes in the relative content of silica/cellulose nanocrystals. Moreover, the incorporation of the light-emitting compound allows a complementary control of the optical properties. Overall, such findings demonstrated that the photonic structure plays the role of direction-dependent inner-filter, causing selective suppression of the light emitted with angle-dependent detection.
RESUMEN
This study is focused on the development of a nanodevice for loading and release of 5-Fluorouracil (5-FU) with a view to improving its therapeutic efficiency, using as strategy the fabrication of a nanoconjugate through drug anchorage on the surface of carbon quantum dots (CQD). Several physicochemical and analytical techniques were employed to obtain information about materials morphology, structure, and optical properties. The results indicated that the interactions between both entities resulted in good physicochemical properties and photostability. Acid pH favored drug release, indicating a tendency to release 5-FU from 5-FU-CQD into the tumor microenvironment. The cytotoxicity of CQD and 5-FU-CQD nanoconjugate was evaluated against normal human lung fibroblast (GM07492A) and human breast cancer (MCF-7) cell lines. The CQD was non-toxic, indicating that these materials are biocompatible and can be used as a nanocarrier for 5-FU in biological systems. For the 5-FU-CQD nanoconjugate, it was observed a reduction in toxicity for normal cells compared to free 5-FU, suggesting that drug anchoring in CQD reduced drug-associated toxicity, while for cancer cells exhibited an antitumor effect equivalent to that of the free drug, opening perspectives for the application of this material in anticancer therapy.
Asunto(s)
Fluorouracilo , Puntos Cuánticos , Carbono , Portadores de Fármacos , Liberación de Fármacos , Fluorouracilo/farmacología , Humanos , NanoconjugadosRESUMEN
Waterborne poly(urethane-urea)s (WPUUs) can be employed as a base for the preparation of new materials with novel properties and applications, such as hydrogels. In this work, sodium alginate (SA) was incorporated into WPUUs and their nanocomposites with TiO2 nanoparticles. The influence of the addition of SA and TiO2 nanoparticles on the final properties of WPUUs based hydrogels was investigated. It was proven that the hydrogen bonding interactions that took place between WPUU and SA strongly affected the final properties. The glass transition temperature and thermal stability of investigated hydrogels were affected depending on the soft segment composition. The prepared hydrogels exhibited swelling ability in an acidic medium. The porous structure of the prepared hydrogels was confirmed by the scanning electron microscope (SEM) measurements. In fact, the mechanical properties indicated an improvement in the compressive modulus with the increase of the SA content. Furthermore, the prepared hydrogels allowed the cell proliferation of human fibroblasts.
RESUMEN
Biopolymeric blends based on bacterial cellulose (BC) films modified with low molecular weight chitosan (Chi) were developed for controlled release of ciprofloxacin (Cip). Biophysical studies revealed a compatible and cooperative network between BC and Chi including deep structural changes in the BC matrix shown by spectroscopic and thermal analyses (SEM, roughness analysis, FTIR, XRD, TGA, mechanical properties and water vapor transmission rate). Incorporation of chitosan to BC matrix generated a thickening scaffold with high permeability to water vapor from 0.7 to 3.2 g mm/m2 h. Cip loaded onto the BC-Chi film showed a hyperbolic release profile with a 30% decrease in antibiotic release mediated by the presence of Chi. BC-Chi blend films containing Cip tested against Pseudomonas aeruginosa and Staphylococcus aureus showed a synergic effect of chitosan on Cip antimicrobial activity. Besides, in vitro studies revealed the lack of cytotoxicity of BC-Chi-Cip films in human fibroblasts.
Asunto(s)
Antiinfecciosos/química , Vendajes , Celulosa/química , Quitosano/química , Ciprofloxacina/química , Fibroblastos/efectos de los fármacos , Antiinfecciosos/farmacología , Línea Celular , Ciprofloxacina/farmacología , Fibroblastos/metabolismo , Calor , Humanos , Peso Molecular , Permeabilidad , Pseudomonas aeruginosa/efectos de los fármacos , Staphylococcus aureus/efectos de los fármacos , TermogravimetríaRESUMEN
Cellulose is everywhere and renovates in nature continuously and rapidly, while petroleum does not. Unlike the latter, cellulose biodegrades and may represent a carbon sink. Inspired by the multiscale architecture of cellulose, we report on all-cellulose composites comprising cellulose ether as a matrix and highly pure bacterial cellulose nanocrystals (BCNCs) as fillers. Optimum performance as a packaging material was achieved by engineering BCNC surface chemistry as well as the filler-in-matrix dispersion, targeting the replacement of unsustainable, fossil-derived plastics intended for single-use applications. Cost could pose a hurdle, eliminated through the valorization of underutilized scraps from industrial operations, which is also in line with the circular bioeconomy in terms of the integral use of biomass. As far as performance, the optically transparent hydroxypropyl methylcellulose (HPMC) films presented improved tensile strength (from 61 ± 6 to 86 ± 9 MPa) and Young's modulus (from 1.5 ± 0.2 to 2.7 ± 0.4 GPa) while reduced elongation at break (from 15 ± 2 to 12 ± 2%) and water vapor permeability (from 0.40 ± 0.02 to 0.31 ± 0.01 g mm h-1 m-2 kPa-1) when filled with only 5 wt % of (120 ± 31) nm long, (13 ± 3) nm wide, 88% crystalline BCNC. This dual, win-win effect of BCNCs on the mechanical and barrier properties of HPMC films was enabled by a suitable dispersion state, achieved via high-energy mixing, and quenched by casting. This study adds to the current literature on all-cellulose composites and helps pave the route for the technical and economical feasibilities of replacing non-renewable, non-biodegradable plastics in short-term applications by materials that are both renewable and biodegradable, that are also produced through green protocols and isolated from surplus biomass, and that still perform similarly or even better.
Asunto(s)
Celulosa/química , Nanocompuestos/química , Nanopartículas/química , Tamaño de la Partícula , Estrés Mecánico , Propiedades de SuperficieRESUMEN
The extensive use of organic molecules (Rhodamine B and Amitriptyline) also has contributed to environmental pollution; adsorption is a relevant method for removal of these contaminants in aqueous media. In this context, the objective of this study was to modify the surface of cellulose (Cel) with phosphoric acid and sodium tripolyphosphate to obtain a biopolymer with incorporated phosphate groups (PCel). The modification was confirmed by X-ray dispersive energy spectroscopy, solid state nuclear magnetic resonance, X-ray diffraction, and thermal analysis. The obtained material (PCel) was used as a Rhodamine B (RhB) or Amitriptyline (AmTP) adsorbent, and the highest adsorption capacity of this material was obtained at pH 3.0 (RhB) and 7.0 (AmTP) and the equilibrium time was achieved at 65 (RhB) and 150 min (AmTP). Moreover, the pseudo-first-order model best describes the kinetics of this adsorption. The experimental adsorption isotherms were adjusted to the Langmuir model, indicating that monolayer adsorption occurred and the highest experimental adsorption capacity obtained was 47.58 (RhB) and 45.52 mg g-1 (AmTP) in PCel. The thermodynamic parameters showed that the adsorption process is exothermic and non-spontaneous, with increase of non-spontaneity with enhance of the temperature. However, PCel was efficient in removing the contaminant (RhB or AmTP) in an aqueous solution.
Asunto(s)
Amitriptilina/química , Biopolímeros/química , Celulosa/química , Rodaminas/química , Adsorción , Concentración de Iones de Hidrógeno , Cinética , Polifosfatos , Temperatura , Termodinámica , Agua/química , Contaminantes Químicos del Agua/química , Purificación del Agua/métodos , Difracción de Rayos XRESUMEN
The pursuit of biocompatible, breathable and skin-conformable wearable sensors has predominantly focused on synthetic stretchable hydrophobic polymers. Microbial nanocellulose (MNC) is an exceptional skin-substitute natural polymer routinely used for wound dressing and offers unprecedented potential as substrate for wearable sensors. A versatile strategy for engineering wearable sensing platforms is reported, with sensing units made of screen-printed carbon electrodes (SPCEs) on MNC. As-prepared SPCEs were used to detect the toxic metals cadmium (Cd2+) and lead (Pb2+) with limits of detection of 1.01 and 0.43 µM, respectively, which are sufficient to detect these metal ions in human sweat and urine. SPCEs functionalized through anodic pre-treatments were used for detecting uric acid and 17ß-estradiol in artificial sweat, with detection limits of 1.8 µM and 0.58 µM, respectively. The electrochemical treatment created oxygen groups on the carbon surfaces, thus improving wettability and hydrophilicity. MNC was herein exploited as an adhesive-free, yet highly skin-adherent platform for wearable sensing devices that also benefit from the semi-permeable, non-allergenic, and renewable features that make MNC unique within the pool of materials that have been used for such a purpose. Our findings have clear implications for the developments on greener and more biocompatible but still efficient substrates and may pave the route for combining immunosensing devices with drug delivery therapies.