Multifunctional integration of tungsten oxide (WO3) coating: A versatile approach for enhanced performance of antibiotics against single mixed bacterial infections.

Nanomaterials containing tungsten (TNMs), characterized by diverse nanostructures had been extensively used in biomedical sector. Despite numerous reports focusing on TNM applications in specific biomedical areas, there is a noticeable absence of comprehensive studies that focused on detailed characterization of nanomaterials along with their biological applications. The present work described the structural, morphological, and antimicrobial properties of tungsten oxide (WO3) nanoparticles coated by antibiotics (nanobiotics), and their application on single and mixed bacterial culture. The nanobiotics included in this study were WO3 coated with ampicillin (W+A), WO3 coated with penicillin (P+W), and WO3 coated with ciprofloxacin (C+W). Techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray spectroscopy (EDX), Fourier transforms infrared spectroscopy (FTIR), Rrman spectroscopy, and UV-visible spectroscopy were used to characterize synthesized nanoparticles. The minimum inhibitory concentration of C+W nanobiotic against S. aureus, E. coli, and mixed culture (S. aureus +E. coli) was lower than that of P+W and A+W. The impact of incubation period showed significant differences for each of nanobiotic against S. aureus, E. coli, and mixed culture. However, there were also non-significant differences among incubation periods for antibacterial activity of nanobiotics. It was pertinent to note that percentage variation in susceptibility of S. aureus with respect to mixed culture remained higher as compared to E. coli, indicating it stronger candidate imposing resistance. This paper thus suggested the strategy of coating of antibiotics with with WO3 nanoparticles as an ideal combination for resistance modulation against single and mixed culture bacteria.

Predictors of unsuccessful interim treatment outcomes of multidrug resistant tuberculosis patients.

BACKGROUND: Interim treatment outcomes at 6-months for multidrug-resistant tuberculosis (MDR-TB) treatment are among the most basic performance monitoring and key evaluation indicators in the Stop and End TB strategy of the World Health Organization (WHO). Therefore, this study was conducted to evaluate the interim treatment outcomes of MDR-TB patients in Pakistan. METHODS: This study was conducted at the Programmatic Management Unit for Drug-resistance TB (PMDT) site of the National Tuberculosis Program (NTP), Pakistan. It is located in the Chest Disease Unit (CDU) of the Bahawal Victoria Hospital (BVH), Bahawalpur, Punjab, Pakistan. Data was collected between April 1, 2014 and December 31, 2015. The medical records, Electronic Nominal Recording Reporting System (ENRS) data and MRD-TB notification forms of the MDR-TB patients registered at the PMDT site were reviewed to obtain data. For reporting and calculation of interim treatment outcomes, standardized WHO methodology was adopted. Simple logistic regression analysis was used to examine the possible association between the dependent variable (i.e. unsuccessful interim treatment outcome) and selected socio-demographic and clinical variables. RESULTS: A total of 100 drug-resistant TB (DR-TB) patients (all types) were registered during the study period. Out of these, 80 were MDR-TB patients for whom interim results were available. Out of the 80 MDR-TB cases, 48 (60%) were classified under the successful interim treatment outcome category. The remaining 40% had unsuccessful 6-month treatment outcomes and 12 (15%) patients died, while nine (11.3%) were lost to follow-up by six months. The final predictors of unsuccessful interim treatment outcomes were; being resistant to ofloxacin (AOR 3.23, 95% CI 0.96-10.89; p-value = 0.04), having above normal baseline serum creatinine levels (AOR 6.49, 95% CI 1.39-30.27; p-value = 0.02), and being culture positive at the second month of treatment (AOR 6.94, 95% CI 2-24.12; p-value = 0.01). CONCLUSIONS: Despite free treatment and programmatic efforts to ensure patient adherence, the high rate of unsuccessful interim treatment outcomes is concerning. The identified risk factors for unsuccessful interim treatment outcomes in the current study provides clinicians an opportunity to identify high-risk patients and ensure enhanced clinical management and greater treatment success rates.

Zika virus disease: a current review of the literature.

BACKGROUND: The massive pandemic of Zika virus (ZIKV) infection is spreading through South America, Central America, the Caribbean, and possibly the USA. It is the most recent of four surprising appearances of imperative arthropod-borne viral illnesses in the Western Hemisphere over the preceding 20 years. OBJECTIVE: The objective of this narrative review is to summarize the existing knowledge about the epidemiology, transmission, clinical manifestations, complications, replication, pathogenesis, diagnosis, and treatment and prevention of ZIKV infection. METHODS: We used electronic databases to identify relevant published data regarding ZIKV in BOOLEAN and MeSH searches. CONCLUSION: This review concludes that the ZIKV predominantly circulates in arboreal mosquitoes (e.g., Aedes africanus) and wild primates. It rarely causes severe infection in humans, even in extremely enzootic regions. Currently, we do not have any efficacious drugs against ZIKV infection. However, there are virus-specific therapeutic targets, which may lead to the development of targeted anti-ZIKV drugs.

Comparative catalytic reduction and degradation with biodegradable sodium alginate based nanocomposite: Zinc oxide/N-doped carbon nitride/sodium alginate.

Sodium alginate (SA) is a biodegradable macromolecule which is used to synthesize nanocomposites and their further use as catalysis. Zinc oxide (ZnO) and nitrogen doped carbon nitride (ND-C3N4) nanoparticles are prepared using solvothermal and hydrothermal methods, respectively. ZnO/ND-C3N4/SA nanocomposites are successfully synthesized by employing in-situ polymerization. The presence of essential functional groups is confirmed by Fourier transform infrared (FTIR) spectroscopic analysis. Controlled spherical morphology for ZnO nanoparticles, with an average diameter of ∼52 nm, is shown by Scanning electron microscopic (SEM) analysis, while rice-like grain structure with an average grain size ∼62 nm is exhibited by ND-C3N4 nanoparticles. The presence of required elements is confirmed by Energy dispersive X-ray spectroscopic (EDX) analysis. The crystalline nature of nanocomposites is verified by X-ray diffraction spectroscopic (XRD) analysis. The investigation of the catalytic efficiency for degradation and reduction of various organic dyes is carried out on nanoparticles and nanocomposites. Thorough examination and comparison of parameters, such as apparent rate constant (kapp), reduction time, percentage reduction, reduced concentration and half-life, are conducted for all substrates. The nanocomposites show greater efficiency than nanoparticles in both reactions: catalytic reduction and catalytic degradation.

Surface-enhanced Raman spectroscopy for the characterization of xylanases enzyme.

Xylanases are essential hydrolytic enzymes which break down the plant cell wall polysaccharide, xylan composed of D-xylose monomers. Surface-enhanced Raman Spectroscopy (SERS) was utilized for the characterization of interaction of xylanases with xylan at varying concentrations. The study focuses on the application of SERS for the characterization of enzymatic activity of xylanases causing hydrolysis of Xylan substrate with increase in its concentration which is substrate for this enzyme in the range of 0.2% to 1.0%. SERS differentiating features are identified which can be associated with xylanases treated with different concentrations of xylan. SERS measurements were performed using silver nanoparticles as SERS substrate to amplify Raman signal intensity for the characterization of xylan treated with xylanases. Principal Component Analysis (PCA) and Partial Least Square Discriminant Analysis (PLS-DA) were applied to analyze the spectral data to analyze differentiation between the SERS spectra of different samples. Mean SERS spectra revealed significant differences in spectral features particularly related to carbohydrate skeletal mode and O-C-O and C-C-C ring deformations. PCA scatter plot effectively differentiates data sets, demonstrating SERS ability to distinguish treated xylanases samples and the PC-loadings plot highlights the variables responsible for differentiation. PLS-DA was employed as a quantitative classification model for treated xylanase enzymes with increasing concentrations of xylan. The values of sensitivity, specificity, and accuracy were found to be 0.98%, 0.99%, and 100% respectively. Moreover, the AUC value was found to be 0.9947 which signifies the excellent performance of PLS-DA model. SERS combined with multivariate techniques, effectively characterized and differentiated xylanase samples as a result of interaction with different concentrations of the Xylan substrate. The identified SERS features can help to characterize xylanases treated with various concentrations of xylan with promising applications in the bio-processing and biotechnology industries.

Resistance Modulation of Individual and Polymicrobial Culture of S. aureus and E. coli through Nanoparticle-Coupled Antibiotics.

Polymicrobial mastitis is now becoming very common in dairy animals, resulting in exaggerated resistance to multiple antibiotics. The current study was executed to find drug responses in individual and mixed Culture of Staphylococcus aureus and Escherichia coli isolated from milk samples, as well as to evaluate the antibacterial potential of tungsten oxide nanoparticles. These isolates (alone and in mixed culture) were further processed for their responses to antibiotics using the disc diffusion method. On the other hand, tungsten oxide WO3 (W) nanoparticles coupled with antibiotics (ampicillin, A, and oxytetracycline, O) were prepared through the chemical method and characterized by X-ray diffraction, scanning electron microscopy (SEM), and UV-visible techniques. The preparations consisting of nanoparticles alone (W) and coupled with ampicillin (WA) and oxytetracycline (WO) were tested against individual and mixed Culture through the well diffusion and broth microdilution methods. The findings of the current study showed the highest resistance in E. coli was against penicillin (60%) and ampicillin (50%), while amikacin, erythromycin, ciprofloxacin, and oxytetracycline were the most effective antibiotics. S. aureus showed the highest resistance against penicillin (50%), oxytetracycline (40%), and ciprofloxacin (40%), while, except for ampicillin, the sensitive strains of S. aureus were in the range of 40-60% against the rest of antibiotics. The highest zones of inhibition (ZOI) against mixed Culture were shown by imipenem and ampicillin, whereas the highest percentage decrease in ZOI was noted in cases of ciprofloxacin (-240%) and gentamicin (-119.4%) in comparison to individual Culture of S. aureus and E. coli. It was noteworthy that the increase in ZOI was not more than 38% against mixed Culture as compared to the individual Culture. On the other hand, there was a significant reduction in the minimum inhibitory concentration (MIC) of nanoparticle-coupled antibiotics compared to nanoparticles alone for individual and mixed-culture bacteria, while MICs in the case of mixed Culture remained consistently high throughout the trial. This study therefore concluded that diverse drug resistance was present in both individual and mixed-culture bacteria, whereas the application of tungsten oxide nanoparticle-coupled antibiotics proved to be an effective candidate in reversing the drug resistance in bacterial strains.

Health-related quality of life and depression among medical sales representatives in Pakistan.

Pharmaceutical companies have been known to pose stress and mental harassment on medical sales representatives (MSRs) in-order to increase pharmaceutical sales. This cross sectional descriptive study, conducted during November and December 2014 in the Lahore and Bahawalpur districts of Punjab, Pakistan, evaluates the Health-Related Quality of Life (HRQoL) and extent of depression among MSRs in Pakistan. The significant predictors of HRQoL and depression among the MSRs were also determined. Using a convenience sampling technique, all consenting MSRs (N = 318) of pharmaceutical companies were asked to self-complete the Short Form-36 (SF-36v2) Health Survey and Stanford Personal Health Questionnaire (PHQ-8). The standard scoring scheme for the SF36v2 and PHQ-8 questionnaires was used. The PHQ-8 scores showed that 16.4 % (n = 52) and 2.5 % of respondents were suffering from major depression and severe major depression, respectively. Being depressed and having difficulty in achieving sales targets were the factors independently associated with lower physical health. Similarly, depression, insufficient time for the family and monthly income less than 36,000 Pakistan Rupees were significant predictors of lower mental health. The factors associated with depression included insufficient time for the family and unsatisfactory behavior of the managers. Compromised mental health and the prevalence of depression among the MSRs suggest pharmaceutical companies need to devise health management strategies and interventions to ensure effective prevention and management of mental health problems among Pakistani MSRs.