Characterization of chimeric antigen receptor modified T cells expressing scFv-IL-13Rα2 after radiolabeling with 89Zirconium oxine for PET imaging.

BACKGROUND: Chimeric antigen receptor (CAR) T cell therapy is an exciting cell-based cancer immunotherapy. Unfortunately, CAR-T cell therapy is associated with serious toxicities such as cytokine release syndrome (CRS) and neurotoxicity. The mechanism of these serious adverse events (SAEs) and how homing, distribution and retention of CAR-T cells contribute to toxicities is not fully understood. Enabling in vitro methods to allow meaningful, sensitive in vivo biodistribution studies is needed to better understand CAR-T cell disposition and its relationship to both effectiveness and safety of these products. METHODS: To determine if radiolabelling of CAR-T cells could support positron emission tomography (PET)-based biodistribution studies, we labeled IL-13Rα2 targeting scFv-IL-13Rα2-CAR-T cells (CAR-T cells) with 89Zirconium-oxine (89Zr-oxine) and characterized and compared their product attributes with non-labeled CAR-T cells. The 89Zr-oxine labeling conditions were optimized for incubation time, temperature, and use of serum for labeling. In addition, T cell subtype characterization and product attributes of radiolabeled CAR-T cells were studied to assess their overall quality including cell viability, proliferation, phenotype markers of T-cell activation and exhaustion, cytolytic activity and release of interferon-γ upon co-culture with IL-13Rα2 expressing glioma cells. RESULTS: We observed that radiolabeling of CAR-T cells with 89Zr-oxine is quick, efficient, and radioactivity is retained in the cells for at least 8 days with minimal loss. Also, viability of radiolabeled CAR-T cells and subtypes such as CD4 + , CD8 + and scFV-IL-13Rα2 transgene positive T cell population were characterized and found similar to that of unlabeled cells as determined by TUNEL assay, caspase 3/7 enzyme and granzyme B activity assay. Moreover, there were no significant changes in T cell activation (CD24, CD44, CD69 and IFN-γ) or T cell exhaustion (PD-1, LAG-3 and TIM3) markers expression between radiolabeled and unlabeled CAR-T cells. In chemotaxis assays, migratory capability of radiolabeled CAR-T cells to IL-13Rα2Fc was similar to that of non-labeled cells. CONCLUSIONS: Importantly, radiolabeling has minimal impact on biological product attributes including potency of CAR-T cells towards IL-13Rα2 positive tumor cells but not IL-13Rα2 negative cells as measured by cytolytic activity and release of IFN-γ. Thus, IL-13Rα2 targeting CAR-T cells radiolabeled with 89Zr-oxine retain critical product attributes and suggest 89Zr-oxine radiolabeling of CAR-T cells may facilitate biodistribution and tissue trafficking studies in vivo using PET.

Morphological landscapes from high content imaging reveal cytokine priming strategies that enhance mesenchymal stromal cell immunosuppression.

Successful clinical translation of mesenchymal stromal cell (MSC) products has not been achieved in the United States and may be in large part due to MSC functional heterogeneity. Efforts have been made to identify "priming" conditions that produce MSCs with consistent immunomodulatory function; however, challenges remain with predicting and understanding how priming impacts MSC behavior. The purpose of this study was to develop a high throughput, image-based approach to assess MSC morphology in response to combinatorial priming treatments and establish morphological profiling as an effective approach to screen the effect of manufacturing changes (i.e., priming) on MSC immunomodulation. We characterized the morphological response of multiple MSC lines/passages to an array of Interferon-gamma (IFN-γ) and tumor necrosis factor-⍺ (TNF-⍺) priming conditions, as well as the effects of priming on MSC modulation of activated T cells and MSC secretome. Although considerable functional heterogeneity, in terms of T-cell suppression, was observed between different MSC lines and at different passages, this heterogeneity was significantly reduced with combined IFN-γ/TNF-⍺ priming. The magnitude of this change correlated strongly with multiple morphological features and was also reflected by MSC secretion of immunomodulatory factors, for example, PGE2, ICAM-1, and CXCL16. Overall, this study further demonstrates the ability of priming to enhance MSC function, as well as the ability of morphology to better understand MSC heterogeneity and predict changes in function due to manufacturing.

Stromal DLK1 promotes proliferation and inhibits differentiation of the intestinal epithelium during development.

The stem/progenitor cells of the developing intestine are biologically distinct from their adult counterparts. Here, we examine the microenvironmental cues that regulate the embryonic stem/progenitor population, focusing on the role of Notch pathway factor delta-like protein-1 (DLK1). mRNA-seq analyses of intestinal mesenchymal cells (IMCs) collected from embryonic day 14.5 (E14.5) or adult IMCs and a novel coculture system with E14.5 intestinal epithelial organoids were used. Following addition of recombinant DLK1 (rDLK) or Dlk1 siRNA (siDlk1), epithelial characteristics were compared using imaging, replating efficiency assays, qPCR, and immunocytochemistry. The intestinal phenotypes of littermate Dlk1+/+ and Dlk1-/- mice were compared using immunohistochemistry. Using transcriptomic analyses, we identified morphogens derived from the embryonic mesenchyme that potentially regulate the developing epithelial cells, to focus on Notch family candidate DLK1. Immunohistochemistry indicated that DLK1 was expressed exclusively in the intestinal stroma at E14.5 at the top of emerging villi, decreased after birth, and shifted to the intestinal epithelium in adulthood. In coculture experiments, addition of rDLK1 to adult IMCs inhibited organoid differentiation, whereas Dlk1 knockdown in embryonic IMCs increased epithelial differentiation to secretory lineage cells. Dlk1-/- mice had restricted Ki67+ cells in the villi base and increased secretory lineage cells compared with Dlk1+/+ embryos. Mesenchyme-derived DLK1 plays an important role in the promotion of epithelial stem/precursor expansion and prevention of differentiation to secretory lineages in the developing intestine.NEW & NOTEWORTHY Using a novel coculture system, transcriptomics, and transgenic mice, we investigated differential molecular signaling between the intestinal epithelium and mesenchyme during development and in the adult. We show that the Notch pathway factor delta-like protein-1 (DLK1) is stromally produced during development and uncover a new role for DLK1 in the regulation of intestinal epithelial stem/precursor expansion and differentiation to secretory lineages.

Morphological features of IFN-γ-stimulated mesenchymal stromal cells predict overall immunosuppressive capacity.

Human mesenchymal stromal cell (MSC) lines can vary significantly in their functional characteristics, and the effectiveness of MSC-based therapeutics may be realized by finding predictive features associated with MSC function. To identify features associated with immunosuppressive capacity in MSCs, we developed a robust in vitro assay that uses principal-component analysis to integrate multidimensional flow cytometry data into a single measurement of MSC-mediated inhibition of T-cell activation. We used this assay to correlate single-cell morphological data with overall immunosuppressive capacity in a cohort of MSC lines derived from different donors and manufacturing conditions. MSC morphology after IFN-γ stimulation significantly correlated with immunosuppressive capacity and accurately predicted the immunosuppressive capacity of MSC lines in a validation cohort. IFN-γ enhanced the immunosuppressive capacity of all MSC lines, and morphology predicted the magnitude of IFN-γ-enhanced immunosuppressive activity. Together, these data identify MSC morphology as a predictive feature of MSC immunosuppressive function.

Morphological profiling using machine learning reveals emergent subpopulations of interferon-γ-stimulated mesenchymal stromal cells that predict immunosuppression.

BACKGROUND: Although a preponderance of pre-clinical data demonstrates the immunosuppressive potential of mesenchymal stromal cells (MSCs), significant heterogeneity and lack of critical quality attributes (CQAs) based on immunosuppressive capacity likely have contributed to inconsistent clinical outcomes. This heterogeneity exists not only between MSC lots derived from different donors, tissues and manufacturing conditions, but also within a given MSC lot in the form of functional subpopulations. We therefore explored the potential of functionally relevant morphological profiling (FRMP) to identify morphological subpopulations predictive of the immunosuppressive capacity of MSCs derived from multiple donors, manufacturers and passages. METHODS: We profiled the single-cell morphological response of MSCs from different donors and passages to the functionally relevant inflammatory cytokine interferon (IFN)-γ. We used the machine learning approach visual stochastic neighbor embedding (viSNE) to identify distinct morphological subpopulations that could predict suppression of activated CD4+ and CD8+ T cells in a multiplexed quantitative assay. RESULTS: Multiple IFN-γ-stimulated subpopulations significantly correlated with the ability of MSCs to inhibit CD4+ and CD8+ T-cell activation and served as effective CQAs to predict the immunosuppressive capacity of additional manufactured MSC lots. We further characterized the emergence of morphological heterogeneity following IFN-γ stimulation, which provides a strategy for identifying functional subpopulations for future single-cell characterization and enrichment techniques. DISCUSSION: This work provides a generalizable analytical platform for assessing functional heterogeneity based on single-cell morphological responses that could be used to identify novel CQAs and inform cell manufacturing decisions.

FDA and NIST collaboration on standards development activities supporting innovation and translation of regenerative medicine products.

The development of standards for the field of regenerative medicine has been noted as a high priority by several road-mapping activities. Additionally, the U.S. Congress recognizes the importance of standards in the 21st Century Cure Act. Standards will help to accelerate and streamline cell and gene therapy product development, ensure the quality and consistency of processes and products, and facilitate their regulatory approval. Although there is general agreement for the need of additional standards for regenerative medicine products, a shared understanding of standards is required for real progress toward the development of standards to advance regenerative medicine. Here, we describe the roles of standards in regenerative medicine as well as the process for standards development and the interactions of different entities in the standards development process. Highlighted are recent coordinated efforts between the U.S. Food and Drug Administration and the National Institute of Standards and Technology to facilitate standards development and foster science that underpins standards development.

High Content Imaging of Early Morphological Signatures Predicts Long Term Mineralization Capacity of Human Mesenchymal Stem Cells upon Osteogenic Induction.

Human bone marrow-derived multipotent mesenchymal stromal cells, often referred to as mesenchymal stem cells (MSCs), represent an attractive cell source for many regenerative medicine applications due to their potential for multi-lineage differentiation, immunomodulation, and paracrine factor secretion. A major complication for current MSC-based therapies is the lack of well-defined characterization methods that can robustly predict how they will perform in a particular in vitro or in vivo setting. Significant advances have been made with identifying molecular markers of MSC quality and potency using multivariate genomic and proteomic approaches, and more recently with advanced techniques incorporating high content imaging to assess high-dimensional single cell morphological data. We sought to expand upon current methods of high dimensional morphological analysis by investigating whether short term cell and nuclear morphological profiles of MSCs from multiple donors (at multiple passages) correlated with long term mineralization upon osteogenic induction. Using the combined power of automated high content imaging followed by automated image analysis, we demonstrated that MSC morphology after 3 days was highly correlated with 35 day mineralization and comparable to other methods of MSC osteogenesis assessment (such as alkaline phosphatase activity). We then expanded on this initial morphological characterization and identified morphological features that were highly predictive of mineralization capacities (>90% accuracy) of MSCs from additional donors and different manufacturing techniques using linear discriminant analysis. Together, this work thoroughly demonstrates the predictive power of MSC morphology for mineralization capacity and motivates further studies into MSC morphology as a predictive marker for additional in vitro and in vivo responses.

Postnatal loss of Dlk1 imprinting in stem cells and niche astrocytes regulates neurogenesis.

The gene for the atypical NOTCH ligand delta-like homologue 1 (Dlk1) encodes membrane-bound and secreted isoforms that function in several developmental processes in vitro and in vivo. Dlk1, a member of a cluster of imprinted genes, is expressed from the paternally inherited chromosome. Here we show that mice that are deficient in Dlk1 have defects in postnatal neurogenesis in the subventricular zone: a developmental continuum that results in depletion of mature neurons in the olfactory bulb. We show that DLK1 is secreted by niche astrocytes, whereas its membrane-bound isoform is present in neural stem cells (NSCs) and is required for the inductive effect of secreted DLK1 on self-renewal. Notably, we find that there is a requirement for Dlk1 to be expressed from both maternally and paternally inherited chromosomes. Selective absence of Dlk1 imprinting in both NSCs and niche astrocytes is associated with postnatal acquisition of DNA methylation at the germ-line-derived imprinting control region. The results emphasize molecular relationships between NSCs and the niche astrocyte cells of the microenvironment, identifying a signalling system encoded by a single gene that functions coordinately in both cell types. The modulation of genomic imprinting in a stem-cell environment adds a new level of epigenetic regulation to the establishment and maintenance of the niche, raising wider questions about the adaptability, function and evolution of imprinting in specific developmental contexts.

Chromatin Changes at the PPAR-γ2 Promoter During Bone Marrow-Derived Multipotent Stromal Cell Culture Correlate With Loss of Gene Activation Potential.

Bone marrow-derived multipotent stromal cells (BM-MSCs) display a broad range of therapeutically valuable properties, including the capacity to form skeletal tissues and dampen immune system responses. However, to use BM-MSCs in a clinical setting, amplification is required, which may introduce epigenetic changes that affect biological properties. Here we used chromatin immunoprecipitation to compare post-translationally modified histones at a subset of gene promoters associated with developmental and environmental plasticity in BM-MSCs from multiple donors following culture expansion. At many locations, we observed localization of both transcriptionally permissive (H3K4me3) and repressive (H3K27me3) histone modifications. These chromatin signatures were consistent among BM-MSCs from multiple donors. Since promoter activity depends on the relative levels of H3K4me3 and H3K27me3, we examined the ratio of H3K4me3 to H3K27me3 (K4/K27) at promoters during culture expansion. The H3K4me3 to H3K27me3 ratios were maintained at most assayed promoters over time. The exception was the adipose-tissue specific promoter for the PPAR-γ2 isoform of PPAR-γ, which is a critical positive regulator of adipogenesis. At PPAR-γ2, we observed a change in K4/K27 levels favoring the repressed chromatin state during culture. This change correlated with diminished promoter activity in late passage cells exposed to adipogenic stimuli. In contrast to BM-MSCs and osteoblasts, lineage-restricted preadipocytes exhibited levels of H3K4me3 and H3K27me3 that favored the permissive chromatin state at PPAR-γ2. These results demonstrate that locus-specific changes in H3K4me3 and H3K27me3 levels can occur during BM-MSC culture that may affect their properties. Stem Cells 2015;33:2169-2181.

Chromosomal stability of mesenchymal stromal cells during in vitro culture.

BACKGROUND AIMS: Mesenchymal stromal cells (MSCs) are being investigated for use in cell therapy. The extensive in vitro expansion necessary to obtain sufficient cells for clinical use increases the risk that genetically abnormal cells will arise and be propagated during cell culture. Genetic abnormalities may lead to transformation and poor performance in clinical use, and are a critical safety concern for cell therapies using MSCs. METHODS: We used spectral karyotyping (SKY) to investigate the genetic stability of human MSCs from ten donors during passaging. RESULTS: Our data indicate that chromosomal abnormalities exist in MSCs at early passages and can be clonally propagated. The karyotypic abnormalities observed during our study diminished during passage. CONCLUSIONS: Karyotyping of MSCs reveals characteristics which may be valuable in deciding the suitability of cells for further use. Karyotypic analysis is useful for monitoring the genetic stability of MSCs during expansion.

Antagonistic roles in fetal development and adult physiology for the oppositely imprinted Grb10 and Dlk1 genes.

BACKGROUND: Despite being a fundamental biological problem the control of body size and proportions during development remains poorly understood, although it is accepted that the insulin-like growth factor (IGF) pathway has a central role in growth regulation, probably in all animals. The involvement of imprinted genes has also attracted much attention, not least because two of the earliest discovered were shown to be oppositely imprinted and antagonistic in their regulation of growth. The Igf2 gene encodes a paternally expressed ligand that promotes growth, while maternally expressed Igf2r encodes a cell surface receptor that restricts growth by sequestering Igf2 and targeting it for lysosomal degradation. There are now over 150 imprinted genes known in mammals, but no other clear examples of antagonistic gene pairs have been identified. The delta-like 1 gene (Dlk1) encodes a putative ligand that promotes fetal growth and in adults restricts adipose deposition. Conversely, Grb10 encodes an intracellular signalling adaptor protein that, when expressed from the maternal allele, acts to restrict fetal growth and is permissive for adipose deposition in adulthood. RESULTS: Here, using knockout mice, we present genetic and physiological evidence that these two factors exert their opposite effects on growth and physiology through a common signalling pathway. The major effects are on body size (particularly growth during early life), lean:adipose proportions, glucose regulated metabolism and lipid storage in the liver. A biochemical pathway linking the two cell signalling factors remains to be defined. CONCLUSIONS: We propose that Dlk1 and Grb10 define a mammalian growth axis that is separate from the IGF pathway, yet also features an antagonistic imprinted gene pair.

Experimental and computational approach to establish fit-for-purpose cell viability assays.

Aim: Cell viability assays are critical for cell-based products. Here, we demonstrate a combined experimental and computational approach to identify fit-for-purpose cell assays that can predict changes in cell proliferation, a critical biological response in cell expansion. Materials & methods: Jurkat cells were systematically injured using heat (45 ± 1°C). Cell viability was measured at 0 h and 24 h after treatment using assays for membrane integrity, metabolic function and apoptosis. Proliferation kinetics for longer term cultures were modeled using the Gompertz distribution to establish predictive models between cell viability results and proliferation. Results & conclusion: We demonstrate an approach for ranking these assays as predictors of cell proliferation and for setting cell viability specifications when a particular proliferation response is required.

In recent years, there has been a surge in the amount of cellular therapy products which have been engineered to treat patients with severe diseases. These cellular products use living cells to treat the disease, and the quality of these cell products is critical for ensuring product safety and effectiveness. Throughout the process of engineering and manufacturing these cell products, many cells can die or be in the process of dying, and the amount of dead cells in the product can impact product yield and quality. In any given cell product at any given time during the manufacturing process, cells are exposed to stresses, and these stresses can injure the cells through several mechanisms, leading to a range of cell death events that can follow different timelines. There are many existing assays which evaluate the health of the cells, known as cell viability assays, and these assays can be based on many different cell features that indicate a cell has been injured (i.e., cell membrane permeability, changes in cell metabolism, molecular markers for cell death). These cell viability assays provide different insights into the state of cell health/injury based on what cell features are being evaluated and the timing at which the viability measurements are taken, and some viability assays may be more appropriate than others for specific applications. Therefore, a method is needed to appropriately select cell viability assays that are designed to evaluate injuries to cells that occur in specific bioprocess. In this series of studies, we used a range of analytical methods to study the number of living and dead cells in a series of cell populations that we treated to induce damage to the cells, reducing their ability to grow. We then used mathematical models to determine the relationship between cell viability measurements and cell growth over time, and used the results to determine the sensitivity of the viability assays to changes in cell growth. We used a specific cell line in this example, but this technique can be applied to any cell line or cell sample population and different types of injuries can be applied to the cells. This approach can be used by manufacturers of cell-based products and therapies to identify cell viability assays that are meaningful for monitoring the production of cells and characterizing product quality.

Identification and characterisation of novel CAR-T cells to target IL13Rα2 positive human glioma in vitro and in vivo.

BACKGROUND: Previously, we discovered that human solid tumours, but not normal human tissues, preferentially overexpress interleukin-13Receptor alpha2, a high binding receptor for IL-13. To develop novel anti-cancer approaches, we constructed a chimeric antigen receptor construct using a high binding and codon optimised scFv-IL-13Rα2 fragment fused with CD3ζ and co-stimulatory cytoplasmic domains of CD28 and 4-1BB. METHODS: We developed a scFv clone, designated 14-1, by biopanning the bound scFv phages using huIL-13Rα2Fc chimeric protein and compared its binding with our previously published clone 4-1. We performed bioinformatic analyses for complementary determining regions (CDR) framework and residue analyses of the light and heavy chains. This construct was packaged with helper plasmids to produce CAR-lentivirus and transduced human Jurkat T or activated T cells from peripheral blood mononuclear cells (PBMCs) to produce CAR-T cells and tested for their quality attributes in vitro and in vivo. Serum enzymes including body weight from non-tumour bearing mice were tested for assessing general toxicity of CAR-T cells. RESULTS: The binding of 14-1 clone is to IL-13Rα2Fc-chimeric protein is ∼5 times higher than our previous clone 4-1. The 14-1-CAR-T cells grew exponentially in the presence of cytokines and maintained phenotype and biological attributes such as cell viability, potency, migration and T cell activation. Clone 14-1 migrated to IL-13Rα2Fc and cell free supernatants only from IL-13Rα2+ve confluent glioma tumour cells in a chemotaxis assay. scFv-IL-13Rα2-CAR-T cells specifically killed IL-13Rα2+ve but not IL-13Rα2-ve tumour cells in vitro and selectively caused significant release of IFN-γ only from IL-13Rα2+ve co-cultures. These CAR-T cells regressed IL-13Rα2+ve glioma xenografts in vivo without any general toxicity. In contrast, the IL-13Rα2 gene knocked-down U251 and U87 xenografts failed to respond to the CAR-T therapy. CONCLUSION: Taken together, we conclude that the novel scFv-IL-13Rα2 CAR-T cell therapy may offer an effective therapeutic option after designing a careful pre-clinical and clinical study.

Dlk1 is a negative regulator of emerging hematopoietic stem and progenitor cells.

The first mouse adult-repopulating hematopoietic stem cells emerge in the aorta-gonad-mesonephros region at embryonic day (E) 10.5. Their numbers in this region increase thereafter and begin to decline at E12.5, thus pointing to the possible existence of both positive and negative regulators of emerging hematopoietic stem cells. Our recent expression analysis of the aorta-gonad-mesonephros region showed that the Delta-like homologue 1 (Dlk1) gene is up-regulated in the region of the aorta-gonad-mesonephros where hematopoietic stem cells are preferentially located. To analyze its function, we studied Dlk1 expression in wild-type and hematopoietic stem cell-deficient embryos and determined hematopoietic stem and progenitor cell activity in Dlk1 knockout and overexpressing mice. Its role in hematopoietic support was studied in co-culture experiments using stromal cell lines that express varying levels of Dlk1. We show here that Dlk1 is expressed in the smooth muscle layer of the dorsal aorta and the ventral sub-aortic mesenchyme, where its expression is dependent on the hematopoietic transcription factor Runx1. We further demonstrate that Dlk1 has a negative impact on hematopoietic stem and progenitor cell activity in the aorta-gonad-mesonephros region in vivo, which is recapitulated in co-cultures of hematopoietic stem cells on stromal cells that express varying levels of Dlk1. This negative effect of Dlk1 on hematopoietic stem and progenitor cell activity requires the membrane-bound form of the protein and cannot be recapitulated by soluble Dlk1. Together, these data suggest that Dlk1 expression by cells of the aorta-gonad-mesonephros hematopoietic microenvironment limits hematopoietic stem cell expansion and is, to our knowledge, the first description of such a negative regulator in this tissue.

Automated microscopy as a quantitative method to measure differences in adipogenic differentiation in preparations of human mesenchymal stromal cells.

BACKGROUND AIMS: Multipotent stromal cells, also called mesenchymal stromal cells (MSCs), are potentially valuable as a cellular therapy because of their differentiation and immunosuppressive properties. As the result of extensive heterogeneity of MSCs, quantitative approaches to measure differentiation capacity between donors and passages on a per-cell basis are needed. METHODS: Human bone marrow-derived MSCs were expanded to passages P3, P5 and P7 from eight different donors and were analyzed for colony-forming unit capacity (CFU), cell size, surface marker expression and forward/side-scatter analysis by flow cytometry. Adipogenic differentiation potential was quantified with the use of automated microscopy. Percentage of adipogenesis was determined by quantifying nuclei and Nile red-positive adipocytes after automated image acquisition. RESULTS: MSCs varied in expansion capacity and increased in average cell diameter with passage. CFU capacity decreased with passage and varied among cell lines within the same passage. The number of adipogenic precursors varied between cell lines, ranging from 0.5% to 13.6% differentiation at P3. Adipogenic capacity decreased significantly with increasing passage. MSC cell surface marker analysis revealed no changes caused by passaging or donor differences. CONCLUSIONS: We measured adipogenic differentiation on a per-cell basis with high precision and accuracy with the use of automated fluorescence microscopy. We correlated these findings with other quantitative bioassays to better understand the role of donor variability and passaging on CFU, cell size and adipogenic differentiation capacity in vitro. These quantitative approaches provide valuable tools to measure MSC quality and measure functional biological differences between donors and cell passages that are not revealed by conventional MSC cell surface marker analysis.

Characterization of Chimeric Antigen Receptor Modified T Cells Expressing scFv-IL-13Rα2 after Radiolabeling with 89Zirconium Oxine for PET Imaging.

Background Chimeric antigen receptor (CAR) T cell therapy is an exciting cell-based cancer immunotherapy. Unfortunately, CAR-T cell therapy is associated with serious toxicities such as cytokine release syndrome (CRS) and neurotoxicity. The mechanism of these serious adverse events (SAEs) and how homing, distribution and retention of CAR-T cells contribute to toxicities is not fully understood. Methods To determine if radiolabelling of CAR-T cells could support positron emission tomography (PET)-based biodistribution studies, we labeled IL-13Rα2 targeting scFv-IL-13Rα2-CAR-T cells (CAR-T cells) with 89 Zirconium-oxine ( 89 Zr-oxine), and characterized and compared their product attributes with non-labeled CAR-T cells. The 89 Zr-oxine labeling conditions were optimized for incubation time, temperature, and use of serum for labeling. In addition, product attributes of radiolabeled CAR-T cells were studied to assess their overall quality including cell viability, proliferation, phenotype markers of T-cell activation and exhaustion, cytolytic activity and release of interferon-γ upon co-culture with IL-13Rα2 expressing glioma cells. Results We observed that radiolabeling of CAR-T cells with 89 Zr-oxine is quick, efficient, and radioactivity is retained in the cells for at least 8 days with minimal loss. Also, viability of radiolabeled CAR-T cells was similar to that of unlabeled cells as determined by TUNEL assay and caspase 3/7 enzyme activity assay. Moreover, there were no significant changes in T cell activation (CD24, CD44, CD69 and IFN-γ) or T cell exhaustion(PD-1, LAG-3 and TIM3) markers expression between radiolabeled and unlabeled CAR-T cells. In chemotaxis assays, migratory capability of radiolabeled CAR-T cells to IL-13Rα2Fc was similar to that of non-labeled cells. Conclusions Importantly, radiolabeling has minimal impact on biological product attributes including potency of CAR-T cells towards IL-13Rα2 positive tumor cells but not IL-13Rα2 negative cells as measured by cytolytic activity and release of IFN-γ. Thus, IL-13Rα2 targeting CAR-T cells radiolabeled with 89 Zr-oxine retain critical product attributes and suggest 89 Zr-oxine radiolabeling of CAR-T cells may facilitate biodistribution and tissue trafficking studies in vivo using PET.

GLI1+ perivascular, renal, progenitor cells: The likely source of spontaneous neoplasia that created the AGMK1-9T7 cell line.

The AGMK1-9T7 cell line has been used to study neoplasia in tissue culture. By passage in cell culture, these cells evolved to become tumorigenic and metastatic in immunodeficient mice at passage 40. Of the 20 x 106 kidney cells originally plated, less than 2% formed the colonies that evolved to create this cell line. These cells could be the progeny of some type of kidney progenitor cells. To characterize these cells, we documented their renal lineage by their expression of PAX-2 and MIOX, detected by indirect immunofluorescence. These cells assessed by flow-cytometry expressed high levels of CD44, CD73, CD105, Sca-1, and GLI1 across all passages tested; these markers have been reported to be expressed by renal progenitor cells. The expression of GLI1 was confirmed by immunofluorescence and western blot analysis. Cells from passages 13 to 23 possessed the ability to differentiate into adipocytes, osteoblasts, and chondrocytes; after passage 23, their ability to form these cell types was lost. These data indicate that the cells that formed the AGMK1-9T7 cell line were GLI1+ perivascular, kidney, progenitor cells.

Cytocentric measurement for regenerative medicine.

Any Regenerative Medicine (RM) business requires reliably predictable cell and tissue products. Regulatory agencies expect control and documentation. However, laboratory tissue production is currently not predictable or well-controlled. Before conditions can be controlled to meet the needs of cells and tissues in culture for RM, we have to know what those needs are and be able to quantify them. Therefore, identification and measurement of critical cell quality attributes at a cellular or pericellular level is essential to generating reproducible cell and tissue products. Here, we identify some of the critical cell and process parameters for cell and tissue products as well as technologies available for sensing them. We also discuss available and needed technologies for monitoring both 2D and 3D cultures to manufacture reliable cell and tissue products for clinical and non-clinical use. As any industry matures, it improves and standardizes the quality of its products. Cytocentric measurement of cell and tissue quality attributes are needed for RM.

3D bioprinting optimization of human mesenchymal stromal cell laden gelatin-alginate-collagen bioink.

3D bioprinting technology has gained increased attention in the regenerative medicine and tissue engineering communities over the past decade with their attempts to create functional living tissues and organsde novo. While tissues such as skin, bone, and cartilage have been successfully fabricated using 3D bioprinting, there are still many technical and process driven challenges that must be overcome before a complete tissue engineered solution is realized. Although there may never be a single adopted bioprinting process in the scientific community, adherence to optimized bioprinting protocols could reduce variability and improve precision with the goal of ensuring high quality printed constructs. Here, we report on the bioprinting of a gelatin-alginate-collagen bioink containing human mesenchymal stromal cells (hMSCs) which has been optimized to ensure printing consistency and reliability. The study consists of three phases: a pre-printing phase which focuses on bioink characterization; a printing phase which focuses on bioink extrudability/printability, construct stability, and printing accuracy; and a post-processing phase which focuses on the homogeneity and bioactivity of the encapsulated hMSC printed constructs. The results showed that eight identical constructs containing hMSCs could be reliably and accurately printed into stable cross-hatched structures with a single material preparation, and that batch-to-batch consistency was accurately maintained across all preparations. Analysis of the proliferation, morphology, and differentiation of encapsulated hMSCs within the printed constructs showed that cells were able to form large,interconnected colonies and were capable of robust adipogenic differentiation within 14 d of culturing.