Electrochemical C-N Bond Formation within Boron Imidazolate Cages Featuring Single Copper Sites.

Electrocatalysis expands the ability to generate industrially relevant chemicals locally and on-demand with intermittent renewable energy, thereby improving grid resiliency and reducing supply logistics. Herein, we report the feasibility of using molecular copper boron-imidazolate cages, BIF-29(Cu), to enable coupling between the electroreduction reaction of CO2 (CO2RR) with NO3- reduction (NO3RR) to produce urea with high selectivity of 68.5% and activity of 424 µA cm-2. Remarkably, BIF-29(Cu) is among the most selective systems for this multistep C-N coupling to-date, despite possessing isolated single-metal sites. The mechanism for C-N bond formation was probed with a combination of electrochemical analysis, in situ spectroscopy, and atomic-scale simulations. We found that NO3RR and CO2RR occur in tandem at separate copper sites with the most favorable C-N coupling pathway following the condensation between *CO and NH2OH to produce urea. This work highlights the utility of supramolecular metal-organic cages with atomically discrete active sites to enable highly efficient coupling reactions.

Retrospective review of endometriosis surgery at Te Whatu Ora - Capital and Coast.

INTRODUCTION: Endometriosis is an under-researched disease, with Aotearoa-specific data severely lacking. Current estimates of parameters such as rates of endometriosis diagnosis, indication for surgery and sites of disease are based on international data. There is currently no published data on endometriosis surgeries in Aotearoa New Zealand. AIMS: We aimed to describe the laparoscopic surgeries conducted for suspected endometriosis at Te Whatu Ora - Capital and Coast, including the prevalence of endometriosis in this cohort, indication for surgery, symptoms experienced, endometriosis stage and sites involved, number of repeat laparoscopies, and prevalence of endometriosis at repeat surgery. MATERIALS AND METHODS: To conduct this retrospective cross-sectional study, data were extracted from Te Whatu Ora - Capital and Coast systems to identify all records indicating surgery for suspected endometriosis during 2018 and 2019. Variables investigated included age, ethnicity, endometriosis diagnosis (International Classification of Diseases-10 Clinical Modification coding), stage of endometriosis, histological report and endometriosis symptoms (pain and/or fertility). RESULTS: There were 436 surgeries for suspected endometriosis performed during 2018 and 2019, and endometriosis was diagnosed in 68.3% of these surgeries. Pacific and Asian people were under-represented in the study cohort compared to the demographics of the hospital catchment area (Pacific: 3.0% vs 8.4%, Asian: 9.9% vs 12.9%). The most common indication for surgery was pain. There were 76 surgeries performed for suspected recurrence of endometriosis, and endometriosis was identified in 55.6% of these. CONCLUSIONS: Endometriosis surgeries in this hospital in Aotearoa show similar presentations and surgical findings to international data. Our findings highlight areas requiring more research in an Aotearoa-specific context.

Highly Selective Metal-Free Electrochemical Production of Hydrogen Peroxide on Functionalized Vertical Graphene Edges.

Electrochemical generation of hydrogen peroxide (H2 O2 ) is an attractive alternative to the energy-intensive anthraquinone oxidation process. Metal-free carbon-based materials such as graphene show great promise as efficient electrocatalysts in alkaline media. In particular, the graphene edges possess superior electrochemical properties than the basal plane. However, identification and enhancement of the catalytically active sites at the edges remain challenging. Furthermore, control of surface wettability to enhance gas diffusion and promote the performance in bulk electrolysis is largely unexplored. Here, a metal-free edge-rich vertical graphene catalyst is synthesized and exhibits a superior performance for H2 O2 production, with a high onset potential (0.8 V versus reversible hydrogen electrode (RHE) at 0.1 mA cm-2 ) and 100% Faradaic efficiency at various potentials. By tailoring the oxygen-containing functional groups using various techniques of electrochemical oxidation, thermal annealing and oxygen plasma post-treatment, the edge-bound in-plane ether-type (COC) groups are revealed to account for the superior catalytic performance. To manipulate the surface wettability, a simple vacuum-based method is developed to effectively induce material hydrophobicity by accelerating hydrocarbon adsorption. The increased hydrophobicity greatly enhances gas transfer without compromising the Faradaic efficiency, enabling a H2 O2 productivity of 1767 mmol gcatalyst -1 h-1 at 0.4 V versus RHE.

Taking a different road: following Ag25 and Au25 cluster activation via in situ differential pair distribution function analysis.

Synchrotron X-ray total scattering measurements and accompanying pair distribution function (PDF) analyses are an excellent characterization technique to complement both transmission electron microscopy (TEM) and extended X-ray absorption fine structure (EXAFS) spectroscopy methods for detailed structural studies of atom-precise metal clusters. Herein, we study the thermal activation of Au25(SR)18- and Ag25(SR)18- clusters on alumina supports via in situ differential PDF (dPDF) analyses to compare structural changes in the metal clusters upon thermal activation in air. The metal-metal interatomic distances in Au25(SR)18- and Ag25(SR)18- clusters as measured by the dPDF method are comparable with those measured via single-crystal crystallographic and EXAFS methods. Compared to EXAFS analysis, in situ dPDF data can also provide high-temperature, non-element specific, longer range structural information with excellent temporal resolution. TEM and dPDF results show that Ag25(SR)18 systems behave significantly differently than analogous Au25(SR)18 systems upon thermal activation. Atom-precise Au clusters on alumina supports show continuous growth in particle size with increasing activation temperature due to particle coalescence upon thermal deprotection, and grow to an average size of 11.2 ± 2.1 nm for samples thermally activated at 650 °C. Conversely, analogous Ag clusters on alumina supports show particle size growth to mid-sized particles (3.2 ± 0.4 nm) at activation temperatures of 450 °C, beyond which the Ag particles then undergo thermal degradation to give smaller Ag clusters with an average size of 1.4 ± 0.2 nm for samples thermally activated at 650 °C. The significant difference in the behaviours of atom-precise, thiolate-protected Au and Ag clusters upon thermal activation emphasizes the development of distinct activation protocols for different metal cluster systems.

Structural and dynamical changes observed when transitioning from an ionic liquid to a deep eutectic solvent.

The microscopic molecular structure and dynamics of a new deep eutectic solvent (DES) composed of an ionic liquid (1-hexyl-3-methylimidazolium chloride) and an amide (trifluoroacetamide) at various molar ratios were investigated using linear and non-linear infrared spectroscopy with a vibrational probe. The use of the ionic liquid allows us to investigate the changes that the system undergoes with the addition of the amide or, equivalently, the changes from an ionic liquid to a DES. Our studies revealed that the vibrational probe in the DES senses a very similar local environment irrespective of the cation chemical structure. In addition, the amide also appears to perceive the same molecular environment. The concentration dependence studies also showed that the amide changes from being isolated from other amides in the ionic liquid environment to an environment where the amide-amide interactions are favored. In the case of the vibrational probe, the addition of the amide produced significant changes in the slow dynamics associated with the making and breaking of the ionic cages but did not affect the rattling-in-cage motions perceived by it. Furthermore, the concentration dependence of slow dynamics showed two regimes which are linked to the changes in the overall structure of the solution. These observations are interpreted in the context of a nanoscopic heterogeneous environment in the DES which, according to the observed dynamical regimes, appears at very large concentrations of the amide (molar ratio of greater than 1:1) since for lower amide molar ratios, the amide appears to be not segregated from the ionic liquid. This proposed molecular picture is supported by small angle x-ray scattering experiments.

Probing Dopant Locations in Silicon Nanocrystals via High Energy X-ray Diffraction and Reverse Monte Carlo Simulation.

Understanding the locations of dopant atoms in ensembles of nanocrystals is crucial to controlling the dopants' function. While electron microscopy and atom probe tomography methods allow investigation of dopant location for small numbers of nanocrystals, assessing large ensembles has remained a challenge. Here, we are using high energy X-ray diffraction (HE-XRD) and structure reconstruction via reverse Monte Carlo simulation to characterize nanocrystal structure and dopant locations in ensembles of highly boron and phosphorus doped silicon nanocrystals (Si NCs). These plasma-synthesized NCs are a particularly intriguing test system for such an investigation, as elemental analysis suggests that Si NCs can be "hyperdoped" beyond the thermodynamic solubility limit in bulk silicon. Yet, free carrier densities derived from local surface plasmon resonances suggest that only a fraction of dopants are active. We demonstrate that the structural characteristics garnered from HE-XRD and structure reconstruction elucidate dopant location and doping efficacy for doped Si NCs from an atomic-scale perspective.

Preserving the Exposed Facets of Pt3Sn Intermetallic Nanocubes During an Order to Disorder Transition Allows the Elucidation of the Effect of the Degree of Alloy Ordering on Electrocatalysis.

Controlling which facets are exposed in nanocrystals is crucial to understanding different activity between ordered and disordered alloy electrocatalysts. We modify the degree of ordering of Pt3Sn nanocubes, while maintaining the shape and size, to enable a direct evaluation of the effect of the order on ORR catalytic activity. We demonstrate a 2.3-fold enhancement in specific activity by 60- and 30%-ordered Pt3Sn nanocubes compared to 95%-ordered. This was shown to be likely due to surface vacancies in the less-ordered particles. The greater order, however, results in higher stability of the electrocatalyst, with the more disordered nanoparticles showing the dissolution of tin and platinum species during electrocatalysis.

An Exceptionally Mild and Scalable Solution-Phase Synthesis of Molybdenum Carbide Nanoparticles for Thermocatalytic CO2 Hydrogenation.

Transition metal carbides (TMCs) have demonstrated outstanding potential for utilization in a wide range of catalytic applications because of their inherent multifunctionality and tunable composition. However, the harsh conditions required to prepare these materials have limited the scope of synthetic control over their physical properties. The development of low-temperature, carburization-free routes to prepare TMCs would unlock the versatility of this class of materials, enhance our understanding of their physical properties, and enable their cost-effective production at industrial scales. Here, we report an exceptionally mild and scalable solution-phase synthesis route to phase-pure molybdenum carbide (α-MoC1-x) nanoparticles (NPs) in a continuous flow millifluidic reactor. We exploit the thermolytic decomposition of Mo(CO)6 in the presence of a surface-stabilizing ligand and a high boiling point solvent to yield MoC1-x NPs that are colloidally stable and resistant to bulk oxidation in air. To demonstrate the utility of this synthetic route to prepare catalytically active TMC NPs, we evaluated the thermochemical CO2 hydrogenation performance of α-MoC1-x NPs dispersed on an inert carbon support. The α-MoC1-x/C catalyst exhibited a 2-fold increase in both activity on a per-site basis and selectivity to C2+ products as compared to the bulk α-MoC1-x analogue.

Enhanced elasticity in poly(acrylic acid) gels via synthesis in the presence of high concentrations of select salts.

Poly(acrylic acid) (PAA) gels synthesized via free-radical polymerization of acrylic acid, N,N'-methylenebisacrylamide and high molarities of salts in water exhibit properties markedly different from PAA gels synthesized without salt, even when the latter are incubated in high-molarity salt solutions after gelation. Particularly noteworthy is unusual mechanical behaviour that includes substantially increased elongation, increased modulus, and rapid recovery after strain. The greatest enhancement in viscoelastic behaviour is evident in 2 M LiCl and ZnCl2 samples, with LiCl samples having a modulus of 39 kPa and reaching an extension ratio of 10 and a fracture stress of 135 kPa, and ZnCl2 samples having a modulus of 43 kPa and reaching an extension ratio of 8.5 and a fracture stress of 175 kPa. This enhanced elasticity is thought to be brought about by a combination of coiled but only weakly-entangled PAA chains with phase-separated regions of salt acting as a plasticizer and modulating intermolecular interactions among AA units.

In situ electrochemical high-energy X-ray diffraction using a capillary working electrode cell geometry.

The ability to generate new electrochemically active materials for energy generation and storage with improved properties will likely be derived from an understanding of atomic-scale structure/function relationships during electrochemical events. Here, the design and implementation of a new capillary electrochemical cell designed specifically for in situ high-energy X-ray diffraction measurements is described. By increasing the amount of electrochemically active material in the X-ray path while implementing low-Z cell materials with anisotropic scattering profiles, an order of magnitude enhancement in diffracted X-ray signal over traditional cell geometries for multiple electrochemically active materials is demonstrated. This signal improvement is crucial for high-energy X-ray diffraction measurements and subsequent Fourier transformation into atomic pair distribution functions for atomic-scale structural analysis. As an example, clear structural changes in LiCoO2 under reductive and oxidative conditions using the capillary cell are demonstrated, which agree with prior studies. Accurate modeling of the LiCoO2 diffraction data using reverse Monte Carlo simulations further verifies accurate background subtraction and strong signal from the electrochemically active material, enabled by the capillary working electrode geometry.

Sequence-Dependent Structure/Function Relationships of Catalytic Peptide-Enabled Gold Nanoparticles Generated under Ambient Synthetic Conditions.

Peptide-enabled nanoparticle (NP) synthesis routes can create and/or assemble functional nanomaterials under environmentally friendly conditions, with properties dictated by complex interactions at the biotic/abiotic interface. Manipulation of this interface through sequence modification can provide the capability for material properties to be tailored to create enhanced materials for energy, catalysis, and sensing applications. Fully realizing the potential of these materials requires a comprehensive understanding of sequence-dependent structure/function relationships that is presently lacking. In this work, the atomic-scale structures of a series of peptide-capped Au NPs are determined using a combination of atomic pair distribution function analysis of high-energy X-ray diffraction data and advanced molecular dynamics (MD) simulations. The Au NPs produced with different peptide sequences exhibit varying degrees of catalytic activity for the exemplar reaction 4-nitrophenol reduction. The experimentally derived atomic-scale NP configurations reveal sequence-dependent differences in structural order at the NP surface. Replica exchange with solute-tempering MD simulations are then used to predict the morphology of the peptide overlayer on these Au NPs and identify factors determining the structure/catalytic properties relationship. We show that the amount of exposed Au surface, the underlying surface structural disorder, and the interaction strength of the peptide with the Au surface all influence catalytic performance. A simplified computational prediction of catalytic performance is developed that can potentially serve as a screening tool for future studies. Our approach provides a platform for broadening the analysis of catalytic peptide-enabled metallic NP systems, potentially allowing for the development of rational design rules for property enhancement.

Toward a modular multi-material nanoparticle synthesis and assembly strategy via bionanocombinatorics: bifunctional peptides for linking Au and Ag nanomaterials.

Materials-binding peptides represent a unique avenue towards controlling the shape and size of nanoparticles (NPs) grown under aqueous conditions. Here, employing a bionanocombinatorics approach, two such materials-binding peptides were linked at either end of a photoswitchable spacer, forming a multi-domain materials-binding molecule to control the in situ synthesis and organization of Ag and Au NPs under ambient conditions. These multi-domain molecules retained the peptides' ability to nucleate, grow, and stabilize Ag and Au NPs in aqueous media. Disordered co-assemblies of the two nanomaterials were observed by TEM imaging of dried samples after sequential growth of the two metals, and showed a clustering behavior that was not typically observed without both metals and the linker molecules. While TEM evidence suggested the formation of AuNP/AgNP assemblies upon drying, SAXS analysis indicated that no extended assemblies existed in solution, suggesting that sample drying plays an important role in facilitating NP clustering. Molecular simulations and experimental data revealed tunable materials-binding based upon the isomerization state of the photoswitchable unit and metal employed. This work is a first step in generating externally actuated biomolecules with specific material-binding properties that could be used as the building blocks to achieve multi-material switchable NP assemblies.

Long-term outcomes of laparoscopic repair of cystocoele.

BACKGROUND: There is little information on the effectiveness of laparoscopic techniques for native tissue repair of cystocoele. AIM: To assess the long-term outcome of laparoscopic cystocoele repair. METHODS: Two hundred and twenty-three women with symptomatic pelvic organ prolapse underwent laparoscopic paravaginal repair and treatment of associated conditions. Women were assessed pre-operatively and postoperatively at 6 weeks, 6 months, 12 months and then annually or biannually with pelvic organ prolapse quantification (POPQ) and subjective assessment at each visit. RESULTS: Median follow-up was 5.2 years (range: 1-12 years) with 140 women (63%) followed for at least 5 years. During follow-up, 79% of women developed prolapse of at least POPQ stage 2 in one or more compartments and 58% became symptomatic again. Overall, 48% underwent further prolapse surgery, but only 24% of women had an anterior prolapse beyond the hymen. Thirty per cent eventually had a further cystocoele repair. CONCLUSION: Long-term follow-up of laparoscopic cystocoele repair shows that cystocoeles are difficult to repair successfully.

Light-activated tandem catalysis driven by multicomponent nanomaterials.

Transitioning energy-intensive and environmentally intensive processes toward sustainable conditions is necessary in light of the current global condition. To this end, photocatalytic processes represent new approaches for H2 generation; however, their application toward tandem catalytic reactivity remains challenging. Here, we demonstrate that metal oxide materials decorated with noble metal nanoparticles advance visible light photocatalytic activity toward new reactions not typically driven by light. For this, Pd nanoparticles were deposited onto Cu2O cubes to generate a composite structure. Once characterized, their hydrodehalogenation activity was studied via the reductive dechlorination of polychlorinated biphenyls. To this end, tandem catalytic reactivity was observed with H2 generation via H2O reduction at the Cu2O surface, followed by dehalogenation at the Pd using the in situ generated H2. Such results present methods to achieve sustainable catalytic technologies by advancing photocatalytic approaches toward new reaction systems.

High Entropy Alloys Enable Durable and Efficient Lithium-Mediated CO2 Redox Reactions.

Designing electrocatalysts with high activity and durability for multistep reduction and oxidation reactions is challenging. High-entropy alloys (HEAs) are intriguing due to their tunable geometric and electronic structure through entropy effects. However, understanding the origin of their exceptional performance and identifying active centers is hindered by the diverse microenvironment in HEAs. Herein, NiFeCoCuRu HEAs designed with an average diameter of 2.17 nm, featuring different adsorption capacities for various reactants and intermediates in Li-mediated CO2 redox reactions, are introduced. The electronegativity-dependent nature of NiFeCoCuRu HEAs induces significant charge redistribution, shifting the d-band center closer to Fermi level and forming highly active clusters of Ru, Co, and Ni for Li-based compounds adsorptions. This lowers energy barriers and simultaneously stabilizes *LiCO2 and LiCO3+CO intermediates, enhancing the efficiency of both CO2 reduction and Li2CO3 decomposition over extended periods. This work provides insights into specific active site interactions with intermediates, highlighting the potential of HEAs as promising catalysts for intricate CO2 redox reactions.

Exploiting localized surface binding effects to enhance the catalytic reactivity of peptide-capped nanoparticles.

Peptide-based methods represent new approaches to selectively produce nanostructures with potentially important functionality. Unfortunately, biocombinatorial methods can only select peptides with target affinity and not for the properties of the final material. In this work, we present evidence to demonstrate that materials-directing peptides can be controllably modified to substantially enhance particle functionality without significantly altering nanostructural morphology. To this end, modification of selected residues to vary the site-specific binding strength and biological recognition can be employed to increase the catalytic efficiency of peptide-capped Pd nanoparticles. These results represent a step toward the de novo design of materials-directing peptides that control nanoparticle structure/function relationships.

Effect of uterine preservation on outcome of laparoscopic uterosacral suspension.

STUDY OBJECTIVE: To compare the objective outcome of laparoscopic uterosacral hysteropexy with that of hysterectomy combined with laparoscopic uterosacral colpopexy. DESIGN: Retrospective cohort study, 1999-2010 (Canadian Task Force classification II-2). SETTING: University hospital in South Australia. PATIENTS: Women with uterovaginal prolapse who had undergone laparoscopic uterosacral hysteropexy (n = 104) or laparovaginal hysterectomy with uterosacral colpopexy (n = 160). Apical suspension procedures were subdivided into prophylactic (Pelvic Organ Prolapse Quantification System [POP-Q] stage 1 apical descent, with stage ≥2 prolapse in an adjacent compartment) and therapeutic (POP-Q stage ≥2 apical descent, with or without adjacent compartment prolapse). INTERVENTIONS: All patients were assessed via POP-Q scoring preoperatively and postoperatively at 6 weeks, 6 months, annually, and then biannually. Recurrence of bulge symptoms and need for repeat treatment were recorded. MEASUREMENTS AND MAIN RESULTS: Demographic data, preoperative degree of prolapse, and percentages of prophylactic and therapeutic procedures were similar in both groups. With a median follow-up of 2.5 years, objective success rates (POP-Q stage <2 in all compartments) for uterosacral hysteropexy were 53% for prophylactic procedures and 41% for therapeutic procedures, and for hysterectomy with uterosacral colpopexy were 66% for prophylactic procedures and 59% for therapeutic procedures. Repeat operation rates overall were 28% for hysteropexy and 21% for hysterectomy with colpopexy. Failures at the apex specifically were 27% for hysteropexy and 11% for hysterectomy with colpopexy (p < .02). CONCLUSION: Hysterectomy with laparoscopic uterosacral colpopexy produced better objective success rates than did laparoscopic uterosacral hysteropexy; however, repeat operation rates were not significantly different.

Resolving Atomic-Scale Structure and Chemical Coordination in High-Entropy Alloy Electrocatalysts for Structure-Function Relationship Elucidation.

The recent breakthrough in confining five or more atomic species in nanocatalysts, referred to as high-entropy alloy nanocatalysts (HEAs), has revealed the possibilities of multielemental interactions that can surpass the limitations of binary and ternary electrocatalysts. The wide range of potential surface configurations in HEAs, however, presents a significant challenge in resolving active structural motifs, preventing the establishment of structure-function relationships for rational catalyst design and optimization. We present a methodology for creating sub-5 nm HEAs using an aqueous-based peptide-directed route. Using a combination of pair distribution function and X-ray absorption spectroscopy, HEA structure models are constructed from reverse Monte Carlo modeling of experimental data sets and showcase a clear peptide-induced influence on atomic-structure and chemical miscibility. Coordination analysis of our structure models facilitated the construction of structure-function correlations applied to electrochemical methanol oxidation reactions, revealing the complex interplay between multiple metals that leads to improved catalytic properties. Our results showcase a viable strategy for elucidating structure-function relationships in HEAs, prospectively providing a pathway for future materials design.

Customized Nanostructured Ceramics via Microphase Separation 3D Printing.

To date, the restricted capability to fabricate ceramics with independently tailored nano- and macroscopic features has hindered their implementation in a wide range of crucial technological areas, including aeronautics, defense, and microelectronics. In this study, a novel approach that combines self- and digital assembly to create polymer-derived ceramics with highly controlled structures spanning from the nano- to macroscale is introduced. Polymerization-induced microphase separation of a resin during digital light processing generates materials with nanoscale morphologies, with the distinct phases consisting of either a preceramic precursor or a sacrificial polymer. By precisely controlling the molecular weight of the sacrificial polymer, the domain size of the resulting material phases can be finely tuned. Pyrolysis of the printed objects yields ceramics with complex macroscale geometries and nanoscale porosity, which display excellent thermal and oxidation resistance, and morphology-dependent thermal conduction properties. This method offers a valuable technological platform for the simplified fabrication of nanostructured ceramics with complex shapes.

Nature of GaOx Shells Grown on Silica by Atomic Layer Deposition.

Gallia-based shells with a thickness varying from a submonolayer to ca. 2.5 nm were prepared by atomic layer deposition (ALD) using trimethylgallium, ozone, and partially dehydroxylated silica, followed by calcination at 500 °C. Insight into the atomic-scale structure of these shells was obtained by high-field 71Ga solid-state nuclear magnetic resonance (NMR) experiments and the modeling of X-ray differential pair distribution function data, complemented by Ga K-edge X-ray absorption spectroscopy and 29Si dynamic nuclear polarization surface enhanced NMR spectroscopy (DNP SENS) studies. When applying one ALD cycle, the grown submonolayer contains mostly tetracoordinate Ga sites with Si atoms in the second coordination sphere ([4]Ga(Si)) and, according to 15N DNP SENS using pyridine as the probe molecule, both strong Lewis acid sites (LAS) and strong Brønsted acid sites (BAS), consistent with the formation of gallosilicate Ga-O-Si and Ga-µ2-OH-Si species. The shells obtained using five and ten ALD cycles display characteristics of amorphous gallia (GaOx), i.e., an increased relative fraction of pentacoordinate sites ([5]Ga(Ga)), the presence of mild LAS, and a decreased relative abundance of strong BAS. The prepared Ga1-, Ga5-, and Ga10-SiO2-500 materials catalyze the dehydrogenation of isobutane to isobutene, and their catalytic performance correlates with the relative abundance and strength of LAS and BAS, viz., Ga1-SiO2-500, a material with a higher relative fraction of strong LAS, is more active and stable compared to Ga5- and Ga10-SiO2-500. In contrast, related ALD-derived Al1-, Al5-, and Al10-SiO2-500 materials do not catalyze the dehydrogenation of isobutane and this correlates with the lack of strong LAS in these materials that instead feature abundant strong BAS formed via the atomic-scale mixing of Al sites with silica, leading to Al-µ2-OH-Si sites. Our results suggest that [4]Ga(Si) sites provide strong Lewis acidity and drive the dehydrogenation activity, while the appearance of [5]Ga(Ga) sites with mild Lewis activity is associated with catalyst deactivation through coking. Overall, the atomic-level insights into the structure of the GaOx-based materials prepared in this work provide a guide to design active Ga-based catalysts by a rational tailoring of Lewis and Brønsted acidity (nature, strength, and abundance).