RESUMEN
The unprecedented availability of sensor networks and GPS-enabled devices has caused the accumulation of voluminous georeferenced data streams. These data streams offer an opportunity to derive valuable insights and facilitate decision making for urban planning. However, processing and managing such data is challenging, given the size and multidimensionality of these data. Therefore, there is a growing interest in spatial approximate query processing depending on stratified-like sampling methods. However, in these solutions, as the number of strata increases, response time grows, thus counteracting the benefits of sampling. In this paper, we originally show the design and realization of a novel online geospatial approximate processing solution called GeoRAP. GeoRAP employs a front-stage filter based on the Ramer-Douglas-Peucker line simplification algorithm to reduce the size of study area coverage; thereafter, it employs a spatial stratified-like sampling method that minimizes the number of strata, thus increasing throughput and minimizing response time, while keeping the accuracy loss in check. Our method is applicable for various online and batch geospatial processing workloads, including complex geo-statistics, aggregation queries, and the generation of region-based aggregate geo-maps such as choropleth maps and heatmaps. We have extensively tested the performance of our prototyped solution with real-world big spatial data, and this paper shows that GeoRAP can outperform state-of-the-art baselines by an order of magnitude in terms of throughput while statistically obtaining results with good accuracy.
RESUMEN
Large amounts of georeferenced data streams arrive daily to stream processing systems. This is attributable to the overabundance of affordable IoT devices. In addition, interested practitioners desire to exploit Internet of Things (IoT) data streams for strategic decision-making purposes. However, mobility data are highly skewed and their arrival rates fluctuate. This nature poses an extra challenge on data stream processing systems, which are required in order to achieve pre-specified latency and accuracy goals. In this paper, we propose ApproxSSPS, which is a system for approximate processing of geo-referenced mobility data, at scale with quality of service guarantees. We focus on stateful aggregations (e.g., means, counts) and top-N queries. ApproxSSPS features a controller that interactively learns the latency statistics and calculates proper sampling rates to meet latency or/and accuracy targets. An overarching trait of ApproxSSPS is its ability to strike a plausible balance between latency and accuracy targets. We evaluate ApproxSSPS on Apache Spark Structured Streaming with real mobility data. We also compared ApproxSSPS against a state-of-the-art online adaptive processing system. Our extensive experiments prove that ApproxSSPS can fulfill latency and accuracy targets with varying sets of parameter configurations and load intensities (i.e., transient peaks in data loads versus slow arriving streams). Moreover, our results show that ApproxSSPS outperforms the baseline counterpart by significant magnitudes. In short, ApproxSSPS is a novel spatial data stream processing system that can deliver real accurate results in a timely manner, by dynamically specifying the limits on data samples.
Asunto(s)
Algoritmos , Internet de las Cosas , CiudadesRESUMEN
Blockchain technology plays a pivotal role in the undergoing fourth industrial revolution or Industry 4.0. It is considered a tremendous boost to company digitalization; thus, considerable investments in blockchain are being made. However, there is no single blockchain technology, but various solutions exist, and they cannot interoperate with one each other. The ecosystem envisioned by the Industry 4.0 does not have centralized management or leading organization, so a single blockchain solution cannot be imposed. The various organizations hold their own blockchains, which must interoperate seamlessly. Despite some solutions for blockchain interoperability being proposed, the problem is still open. This paper aims to devise a secure solution for blockchain interoperability. The proposed approach consists of a relay scheme based on Trusted Execution Environment to provide higher security guarantees than the current literature. In particular, the proposed solution adopts an off-chain secure computation element invoked by a smart contract on a blockchain to securely communicate with its peered counterpart. A prototype has been implemented and used for the performance assessment, e.g., to measure the latency increase due to cross-blockchain interactions. The achieved and reported experimental results show that the proposed security solution introduces an additional latency that is entirely tolerable for transactions. At the same time, the usage of the Trusted Execution Environment imposes a negligible overhead.
Asunto(s)
Cadena de Bloques , EcosistemaRESUMEN
The relevance of effective and efficient solutions for vehicle traffic surveillance is widely recognized in order to enable advanced strategies for traffic management, e.g., based on dynamically adaptive and decentralized traffic light management. However, most related solutions in the literature, based on the powerful enabler of cooperative vehicular communications, assume the complete penetration rate of connectivity/communication technologies (and willingness to participate in the collaborative surveillance service) over the targeted vehicle population, thus making them not applicable nowadays. The paper originally proposes an innovative solution for cooperative traffic surveillance based on vehicular communications capable of: (i) working with low penetration rates of the proposed technology and (ii) of collecting a large set of monitoring data about vehicle mobility in targeted areas of interest. The paper presents insights and lessons learnt from the design and implementation work of the proposed solution. Moreover, it reports extensive performance evaluation results collected on realistic simulation scenarios based on the usage of iTETRIS with real traces of vehicular traffic of the city of Bologna. The reported results show the capability of our proposal to consistently estimate the real vehicular traffic even with low penetration rates of our solution (only 10%).
RESUMEN
We claim the strong potential of data-centric communications in Unmanned Aircraft Systems (UAS), as a suitable paradigm to enhance collaborative operations via efficient information sharing, as well as to build systems supporting flexible mission objectives. In particular, this paper analyzes the primary contributions to data dissemination in UAS that can be given by the Data Distribution Service (DDS) open standard, as a solid and industry-mature data-centric technology. Our study is not restricted to traditional UAS where a set of Unmanned Aerial Vehicles (UAVs) transmit data to the ground station that controls them. Instead, we contemplate flexible UAS deployments with multiple UAV units of different sizes and capacities, which are interconnected to form an aerial communication network, enabling the provision of value-added services over a delimited geographical area. In addition, the paper outlines an approach to address the issues inherent to the utilization of network-level multicast, a baseline technology in DDS, in the considered UAS deployments. We complete our analysis with a practical experience aiming at validating the feasibility and the advantages of using DDS in a multi-UAV deployment scenario. For this purpose, we use a UAS testbed built up by heterogeneous hardware equipment, including a number of interconnected micro aerial vehicles, carrying single board computers as payload, as well as real equipment from a tactical UAS from the Spanish Ministry of Defense.
RESUMEN
The spread of off-the-shelf mobile devices equipped with multiple wireless interfaces together with sophisticated sensors is paving the way to novel wireless Internet of Things (IoT) environments, characterized by multi-hop infrastructure-less wireless networks where devices carried by users act as sensors/actuators as well as network nodes. In particular, the paper presents Real Ad-hoc Multi-hop Peer-to peer-Wireless IoT Application (RAMP-WIA), a novel solution that facilitates the development, deployment, and management of applications in sparse Smart City environments, characterized by users willing to collaborate by allowing new applications to be deployed on their smartphones to remotely monitor and control fixed/mobile devices. RAMP-WIA allows users to dynamically configure single-hop wireless links, to manage opportunistically multi-hop packet dispatching considering that the network topology (together with the availability of sensors and actuators) may abruptly change, to actuate reliably sensor nodes specifically considering that only part of them could be actually reachable in a timely manner, and to upgrade dynamically the nodes through over-the-air distribution of new software components. The paper also reports the performance of RAMP-WIA on simple but realistic cases of small-scale deployment scenarios with off-the-shelf Android smartphones and Raspberry Pi devices; these results show not only the feasibility and soundness of the proposed approach, but also the efficiency of the middleware implemented when deployed on real testbeds.
RESUMEN
Nowadays, sensor-rich smartphones potentially enable the harvesting of huge amounts of valuable sensing data in urban environments, by opportunistically involving citizens to play the role of mobile virtual sensors to cover Smart City areas of interest. This paper proposes an in-depth study of the challenging technical issues related to the efficient assignment of Mobile Crowd Sensing (MCS) data collection tasks to volunteers in a crowdsensing campaign. In particular, the paper originally describes how to increase the effectiveness of the proposed sensing campaigns through the inclusion of several new facilities, including accurate participant selection algorithms able to profile and predict user mobility patterns, gaming techniques, and timely geo-notification. The reported results show the feasibility of exploiting profiling trends/prediction techniques from volunteers' behavior; moreover, they quantitatively compare different MCS task assignment strategies based on large-scale and real MCS data campaigns run in the ParticipAct living lab, an ongoing MCS real-world experiment that involved more than 170 students of the University of Bologna for more than one year.
RESUMEN
Internet of Medical Things (IoMT)-driven smart health and emotional care is revolutionizing the healthcare industry by embracing several technologies related to multimodal physiological data collection, communication, intelligent automation, and efficient manufacturing. The authentication and secure exchange of electronic health records (EHRs), comprising of patient data collected using wearable sensors and laboratory investigations, is of paramount importance. In this article, we present a novel high payload and reversible EHR embedding framework to secure the patient information successfully and authenticate the received content. The proposed approach is based on novel left data mapping (LDM), pixel repetition method (PRM), RC4 encryption, and checksum computation. The input image of size [Formula: see text] is upscaled by using PRM that guarantees reversibility with lesser computational complexity. The binary secret data are encrypted using the RC4 encryption algorithm and then the encrypted data are grouped into 3-bit chunks and converted into decimal equivalents. Before embedding, these decimal digits are encoded by LDM. To embed the shifted data, the cover image is divided into [Formula: see text] blocks and then in each block, two digits are embedded into the counter diagonal pixels. For tamper detection and localization, a checksum digit computed from the block is embedded into one of the main diagonal pixels. A fragile logo is embedded into the cover images in addition to EHR to facilitate early tamper detection. The average peak signal to noise ratio (PSNR) of the stego-images obtained is 41.95 dB for a very high embedding capacity of 2.25 bits per pixel. Furthermore, the embedding time is less than 0.2 s. Experimental results reveal that our approach outperforms many state-of-the-art techniques in terms of payload, imperceptibility, computational complexity, and capability to detect and localize tamper. All the attributes affirm that the proposed scheme is a potential candidate for providing better security and authentication solutions for IoMT-based smart health.