Tailoring the hexagonal boron nitride nanomesh on Rh(111) with gold.

It is known that the hexagonal boron nitride (h-BN) monolayer has a periodically corrugated structure on Rh(111), termed "nanomesh", while the h-BN layer is planar on the close packed surfaces of coinage metals (Cu, Ag, Au) due the weak interactions. Our studies are aimed at understanding the metal-h-BN interaction, when both Rh and Au are present. On the one hand, the growth and thermal properties of gold deposited on h-BN nanomesh prepared on Rh(111) were studied. On the other hand, the formation of h-BN was examined on Au/Rh surface alloys prepared by the deposition of Au on Rh(111) and subsequent annealing at 1000 K. In each case, the h-BN was prepared by the decomposition of borazine at about 1000 K. Low energy ion scattering (LEIS), X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM) measurements revealed that the growth of Au on h-BN/Rh(111) at room temperature leads to the formation of mainly three dimensional (3D) gold nanoparticles, although at low coverages (<0.2 ML) 2D particles formed as well. Stepwise annealing to higher temperatures induces the intercalation of Au below the nanomesh, which was complete at around 1050 K. Some agglomeration and desorption of Au also took place. Interestingly, the nanomesh structure was observable after intercalation up to relatively large Au coverages. Measurements performed in the reverse order, namely exposing a Au/Rh(111) surface alloy to borazine, revealed that Rh atoms get covered by h-BN (or by its precursors) at significantly smaller borazine exposures than Au atoms. The nanomesh structure was essentially present up to a gold coverage of 0.9 ML, but with a smaller pore diameter, while it gradually disappeared at higher gold amounts. In this way the application of surface alloy supports provides a key for gradual tuning of the mesh morphology. Density functional theory calculations confirmed the decreased pore diameter of the BN layer upon the formation of a surface Rh-Au alloy layer.

Growth of gold on a pinwheel TiO(∼1.2) encapsulation film prepared on rhodium nanocrystallites.

Rh nanoparticles of 50-100 nm diameter and 20-40 atomic layer thickness with a (111) flat top facet parallel to the support surface were grown on a TiO2(110) surface via physical vapor deposition (PVD) at room temperature (RT) followed by annealing at 1050 K. These nanoparticles were completely encapsulated by an ordered hexagonal pinwheel TiO∼1.2 ultrathin oxide (w-TiO-UTO) film. STM, XPS, and low energy ion scattering (LEIS) methods were used to characterize the postdeposition of gold and the effects of annealing on the Au/w-TiO-UTO/Rh-particle system. The adlayer exhibits 3D growth and Rh-Au bond formation at 500 K. The 3D Au nanoparticles of 2-3 nm diameter and ∼1 nm height are partially covered by TiOx species at RT and sinter via an Ostwald-ripening in the range of 500-800 K. The adparticles are gradually getting free of TiOx decoration, and at around 900 K they exhibit a double layer height with 2D character. Two different arrangements were found for these Au particles: (i) a compressed Au(111)-(1 × 1) and (ii) a reconstructed Au(111)-(2 × 1), both of them pseudomorphic with the Rh lattice underneath. Above 900 K, the thickness of these 2D particles tends to become a single layer, while they spread out and form a continuous gold layer on the Rh nanoparticles. This behavior indicates a thermally activated replacement of the w-TiO-UTO film by an Au ultrathin layer. The gold layer is stable up to 1000 K, where extended 1D interfaces are formed between gold and w-TiO-UTO layers.

Interaction of Rh with Rh nanoparticles encapsulated by ordered ultrathin TiO(1+x) film on TiO2(110) surface.

Rh films of 5-50 monolayers (ML) were grown on TiO2(110)-(1 × 1) surface by physical vapor deposition (PVD) at 300 K followed by annealing at max. 1050 K. In the coverage range of 5-15 ML, separated stripe-like Rh nanoparticles of approximately 30 × 150 nm lateral size and 10-20 layer thickness with a flat top (111) facet were formed. At higher coverages (15-50 ML), the Rh film sustained its continuity at least up to 950 K. For both cases, the Rh(111) top facets were completely covered by a long-range ordered hexagonal "wagon-wheel" TiO(1+x) ultrathin oxide (hw-TiO-UTO) film. STM-STS, XPS, LEIS, and TDS methods were used for morphologic and electronic characterization of surfaces prepared in this way. The main part of this study is devoted to the study of postdeposition of Rh on the hw-TiO-UTO layer at different temperatures (230 K, 310 K, 500 K) and to the effect of subsequent annealing. It was found that 2D nanoparticles of 0.2-0.3 nm height and 1-2 nm diameter are formed at RT and their average lateral size increases gradually in the range of 300-900 K. The LEIS intensity data and the CO TDS titration of the particles have shown that an exchange of the postdeposited Rh atoms with the hw-TiO-UTO layer proceeds to an extent of around 50% at 230 K and this value increases up to 80-90% in the range of 300-500 K. The total disappearance of the characteristic LEIS signal for Rh takes place at around 900 K where a complete hw-TiO-UTO adlayer forms on top of the postdeposited metal (100% exchange).

Formation of Rh-Au core-shell nanoparticles on TiO2(110) surface studied by STM and LEIS.

Rh-Au core-shell nanoparticles were fabricated on TiO(2)(110) surface by physical vapor deposition (PVD) of Rh followed by exposure of Au at elevated sample temperature (500 K). The morphology of the bimetallic particles was checked by scanning tunneling microscopy (STM). The chemical composition of the particles was characterized by low energy ion scattering (LEIS) method. It was shown that the "seeding + growing" method described previously for growth of monometallic particles in narrow size distribution (Berko, A. et al. J. Catal. 1999, 182, 511) can also be applied for fabrication of bimetallic nanoparticles. The large mean free path of surface diffusion of gold on the oxide support makes the accumulation of Au possible exclusively on the Rh seeds formed in the first step of the procedure. By performing careful STM and LEIS experiments, it was proven that, for appropriate Au and Rh coverages, the postdeposited Au completely and uniformly covers the Rh nanoparticles.

Adsorption of Azobenzene on Hexagonal Boron Nitride Nanomesh Supported by Rh(111).

Adsorption properties of azobenzene, the prototypical molecular switch, were investigated on a hexagonal boron nitride (h-BN) monolayer ("nanomesh") prepared on Rh(111). The h-BN layer was produced by decomposing borazine (B3N3H6) at 1000-1050 K. Temperature-programmed desorption (TPD) studies revealed that azobenzene molecules adsorbed on the "wire" and "pore" regions desorb at slightly different temperatures. Angle-resolved high-resolution electron energy loss spectroscopy (HREELS) measurements demonstrated that the first molecular layer is characterized predominantly by an adsorption geometry with the molecular plane parallel to the surface. Scanning tunneling microscopy (STM) indicated a clear preference for adsorption in the pores, manifesting a templating effect, but in some cases one-dimensional molecular stripes also form, implying attractive molecule-molecule interaction. Density functional theory (DFT) calculations provided further details regarding the adsorption energetics and bonding and confirmed the experimental findings that the molecules adsorb with the phenyl rings parallel to the surface, preferentially in the pores, and indicated also the presence of an attractive molecule-molecule interaction.

Attenuation of inflammation and cytokine production in rat colitis by a novel selective inhibitor of leukotriene A4 hydrolase.

BACKGROUND AND PURPOSE: Leukotriene B(4) (LTB(4)), formed by the sequential actions of the 5-lipoxygenase (5-LO) and leukotriene A(4) hydrolase (LTA(4)H), is a pro-inflammatory mediator implicated in the pathogenesis of inflammatory bowel disease. However, inhibitors of 5-LO have not proved to be consistent in their therapeutic efficacy in colitis. Another approach to inhibiting LTB(4) synthesis is through the use of inhibitors of LTA(4)H, such as the novel, potent and selective compound, JNJ 26993135. EXPERIMENTAL APPROACH: The effect of oral administration of JNJ 26993135 has been evaluated in a rat model of colitis provoked by colonic instillation of trinitrobenzenesulphonic acid (TNBS). The extent and severity of the macroscopic inflammatory response, the colonic levels of myeloperoxidase (MPO) and LTB(4) and of the pro-inflammatory cytokines, tumour necrosis factor-alpha (TNF-alpha) and interleukin-6 (IL-6) were measured. KEY RESULTS: Oral administration of JNJ 26993135 (5, 15 and 30 mg kg(-1), twice a day) dose-dependently reduced both the extent and intensity of the colonic inflammatory damage observed 3 days after TNBS challenge. JNJ 26993135 also dose-dependently reduced the elevated colonic levels of LTB(4), as well as the inflammatory biomarkers, MPO, IL-6 and TNF-alpha. This dosing regimen was supported by the pharmacokinetic profile of JNJ 26993135, along with the demonstration of the inhibition of ex vivo production of LTB(4) in whole blood following oral administration. CONCLUSIONS AND IMPLICATIONS: These results with JNJ 26993135 in the rat TNBS model support the role of LTB(4) in colitis and the potential value of targeting LTA(4)H for the treatment of inflammatory bowel diseases.

Inhibitory effect of vasopressin receptor antagonist OPC-31260 on experimental brain oedema induced by global cerebral ischaemia.

The effects of the non-peptide vasopressin V(2) receptor antagonist 5-dimethylamino-1-[4-(2-methylbenzoylamino)benzoyl]-2,3,4,5-tetrahydro-1H-benzazepine hydrochloride (OPC-31260) on the cerebral oedema induced by general cerebral hypoxia were studied in rats. The general cerebral hypoxia was produced by bilateral common carotid ligation in Sprague-Dawley rats of the CFY strain. By 6 h after the ligation, half of the rats had died, but the survival rate was significantly higher following OPC-31260 administration. Electron microscopic examinations revealed typical ischaemic changes after the carotid ligation. The carotid ligation increased the brain contents of water and Na(+) and enhanced the plasma vasopressin level. The increased brain water and Na(+) accumulation was prevented by OPC-31260 administration, but the plasma vasopressin level was further enhanced by OPC-31260. These results demonstrate the important role of vasopressin in the development of the disturbances in brain water and electrolyte balance in response to general cerebral hypoxia. The carotid ligation-induced cerebral oedema was significantly reduced following oral OPC-31260 administration. The protective mechanism exerted by OPC-31260 stems from its influence on the renal vasopressin V(2) receptors. These observations might suggest an effective approach to the treatment of global hypoxia-induced cerebral oedema in humans.

[Nervous system involvement in hemorrhagic fever with renal syndrome].

The authors of the article describe two cases of hemorrhagic fever with renal syndrome (HFRS) with prevalence of signs of nervous system involvement. The first case was a 40-year-old woman with moderate HFRS, who developed Guillain-Barre syndrome of axonal-demyelinating polyneuropathy. An important observation was the absence of hemorrhagic or renal syndrome; combined therapy including plasmapheresis was successful. The second case demonstrated polymorphism of HFRS clinical manifestations with prevalence of neurological symptoms, which consisted in encephalopathy and no renal failure signs; hemorrhagic syndrome was moderate. In both cases the diagnosis was confirmed by elevated titer of antibodies to HFRS virus, belonging to the group of hantaviruses.

Raloxifene, an oestrogen-receptor modulator, prevents decreased constitutive nitric oxide and vasoconstriction in ovariectomized rats.

Administration of graded doses of [Arg(8)]vasopressin (0.06-0.18 microg kg(-1), i.v.) induced a dose-dependent increase in arterial blood pressure in the catecholamine-depleted (phentolamine; 10 mg kg(-1), i.p.) intact and ovariectomized female rat, with the elevation of blood pressure more marked following ovariectomy. In addition, ovariectomy caused the down-regulation of aortic Ca(2+)-dependent constitutive nitric oxide synthase (assessed by the citrulline assay). The down-regulation of the Ca(2+)-dependent constitutive nitric oxide synthase and augmentation of vasopressin-induced blood pressure responses were prevented by the therapy (1 month, p.o.) with the selective oestrogen receptor modulator, raloxifene (0.3-1.0 mg kg(-1) day(-1)), or with 17beta-oestradiol (0.3 mg kg(-1) day(-1)) in ovariectomized rats. Thus, oestrogen deficiency down-regulates vascular constitutive nitric oxide synthase, which appears to be involved in the increased sensitivity of the vasculature to vasopressin, since both effects can be reversed by the exogenous administration of the natural oestrogen 17beta-oestradiol or the selective oestrogen-receptor modulator raloxifene.

[A biological rhythm approach to psychological correction of postural tone disorders in pregnant women with arterial hypotension]. / Bioritmologicheskii podkhod k psikhicheskoi korrektsii narushenii postural'nogo tonusa u beremennykh zhenshchin s arterial'noi gipotenziei.

The studies have demonstrated a correcting and synchronizing effect of differentiated psychotherapy and dosed exercise on the maternal and fetal reactions to active postural load in women with gestational arterial hypotension, developing a blood circulatory disadaptation in the mother-fetus system and circadian desynchronization of the postural tone. Traditional physiopsychoprophylactic preparation to labor, carried out in the reference group of pregnant women, was of no avail in this respect.