Using Digital and Physical Simulation to Focus on Human Factors and Ergonomics in Aviation Maintainability.

OBJECTIVE: This research aimed to evaluate the differences in the assessments made by three simulation tools used in a maintainability design office to perform human factor/ergonomics (HFE) analysis: digital human modeling (DHM), virtual reality (VR), and physical mock-up (PMU). BACKGROUND: Maintainability engineers use digital/physical simulation tools in the early design phase to analyze whether the design is well adapted for maintenance operators. Knowing the potential of these simulation tools would encourage maintainability stakeholders to integrate HFE in the design process more efficiently. METHOD: Eleven maintenance tasks were analyzed from the participation of six maintenance operators. Various HFE indicators including physical, cognitive, and organizational indicators were assessed. Each operator repeated 11 maintenance tasks on VR and PMU. Based on the anthropometric parameters, six manikins were created to analyze 11 maintenance tasks on DHM. RESULTS: A significant difference was found for the organizational indicators between VR and PMU, whereas the physical and cognitive indicators are similar. DHM, VR, and PMU are compared with the common HFE indicators for the physical dimension and present a significant difference for individual tasks. CONCLUSION: To reduce the gap between simulation tools, a better physical representation is requested on the VR platform, improving the perception of work sequences in the virtual world. Concerning DHM, a new paradigm is proposed to study a few tasks per work area instead of studying each task independently. APPLICATION: This study will help develop a new methodology and tools specifically for non-HFE experts in the maintainability department.

Identification of suitable qPCR reference genes in leaves of Brassica oleracea under abiotic stresses.

Real-time quantitative PCR is nowadays a standard method to study gene expression variations in various samples and experimental conditions. However, to interpret results accurately, data normalization with appropriate reference genes appears to be crucial. The present study describes the identification and the validation of suitable reference genes in Brassica oleracea leaves. Expression stability of eight candidates was tested following drought and cold abiotic stresses by using three different softwares (BestKeeper, NormFinder and geNorm). Four genes (BolC.TUB6, BolC.SAND1, BolC.UBQ2 and BolC.TBP1) emerged as the most stable across the tested conditions. Further gene expression analysis of a drought- and a cold-responsive gene (BolC.DREB2A and BolC.ELIP, respectively), confirmed the stability and the reliability of the identified reference genes when used for normalization in the leaves of B. oleracea. These four genes were finally tested upon a benzene exposure and all appeared to be useful reference genes along this toxicological condition. These results provide a good starting point for future studies involving gene expression measurement on leaves of B. oleracea exposed to environmental modifications.

Impact of cadmium on forage kale (Brassica oleracea var. viridis cv "Prover") after 3-,10- and 56-day exposure to a Cd-spiked field soil.

Cadmium (Cd) is a highly toxic element for living organisms and is widespread in metal-contaminated soils. As organisms which can grow up on these polluted areas, plants have some protection mechanisms against Cd issues. Among the plant kingdom, the Brassicaceae family includes species which are known to be able to tolerate and accumulate Cd in their tissues. In this study, Brassica oleracea var. viridis cv "Prover" was exposed to a range of artificially Cd-contaminated soils (from 2.5 up to 20 mg kg-1) during 3, 10, and 56 days and the effects on life traits, photosynthesis activity, antioxidant enzymatic activities were studied. Metal accumulation was quantified, as well as DNA damage, by means of the comet assay and immunodetection of 8-OHdG levels. Globally, B. oleracea was relatively tolerant to those Cd exposures. However, comet assay and detection of 8-OHdG revealed some DNA damage but which are not significant. According to metal accumulation analysis, B. oleracea var. viridis cv Prover could be a good candidate for alternative growing in contaminated areas.

Metallic trace element body burdens and gene expression analysis of biomarker candidates in Eisenia fetida, using an "exposure/depuration" experimental scheme with field soils.

Smelting plant activities lead to the accumulation of Metal Trace Elements (MTEs) in soils. The presence of high concentrations of MTEs can generate an environmental stress likely to affect macroinvertebrates living in close soil contact such as the Annelida Oligochaeta. Eisenia fetida, an ecotoxicologically important test species, was successively exposed to two field soils: (1) a highly contaminated agricultural topsoil collected near the former smelter Metaleurop Nord (Noyelles-Godault, France) which contaminated surrounding soils by its atmospheric emissions [exposure phase], and then (2) a slightly contaminated topsoil from an urban garden located in the conurbation of Lille (Wambrechies) [depuration phase]. Two analyses were performed during each phase. Firstly, the gene expression levels of four biomarker candidates identified in previous studies were analyzed in E. fetida coelomocytes. These candidates are Cd-metallothionein, phytochelatin synthase, coactosin-like protein and lysenin. Secondly, the body burdens of the following elements Cd, Pb, Zn, Cu, Fe, Ca, and P were measured. Moreover, both analyses were also performed in Lumbricus rubellus, an Annelid species collected from the two tested soil-originating sites. Analysis of gene expression and MTE body burdens in both species are discussed to: (1) evaluate expression biomarkers; (2) gain insight the detoxification processes and the long-term response to a metallic stress and (3) compare the responses observed in a test species (E. fetida) with the responses of a field species (L. rubellus).

The role of epicuticular waxes on foliar metal transfer and phytotoxicity in edible vegetables: case of Brassica oleracea species exposed to manufactured particles.

The rapid industrialization and urbanization of intra- and peri-urban areas at the world scale are responsible for the degradation of the quality of edible crops, because of their contamination with airborne pollutants. Their consumption could lead to serious health risks. In this work, we aim to investigate the phytotoxicity induced by foliar transfer of atmospheric particles of industrial/urban origin. Leaves of cabbage plants (Brassica oleracea var. Prover) were contaminated with metal-rich particles (PbSO4 CuO and CdO) of micrometer size. A trichloroacetic acid (TCA) treatment was used to inhibit the synthesis of the epicuticular waxes in order to investigate their protective role against metallic particles toxicity. Besides the location of the particles on/in the leaves by microscopic techniques, photosynthetic activity measurements, genotoxicity assessment, and quantification of the gene expression have been studied for several durations of exposure (5, 10, and 15 days). The results show that the depletion of epicuticular waxes has a limited effect on the particle penetration in the leaf tissues. The stomatal openings appear to be the main pathway of particles entry inside the leaf tissues, as demonstrated by the overexpression of the BolC.CHLI1 gene. The effects of particles on the photosynthetic activity are limited, considering only the photosynthetic Fv/Fm parameter. The genotoxic effects were significant for the contaminated TCA-treated plants, especially after 10 days of exposure. Still, the cabbage plants are able to implement repair mechanisms quickly, and to thwart the physiological effects induced by the particles. Finally, the foliar contamination by metallic particles induces no serious damage to DNA, as observed by monitoring the BolC.OGG1 gene.

Insight into the expression variation of metal-responsive genes in the seedling of date palm (Phoenix dactylifera).

Phytochelatin synthase and metallothionein gene expressions were monitored via qPCR in order to investigate the molecular mechanisms involved in Cd and Cr detoxification in date palm (Phoenix dactylifera). A specific reference gene validation procedure using BestKeeper, NormFinder and geNorm programs allowed selection of the three most stable reference genes in a context of Cd or Cr contamination among six reference gene candidates, namely elongation factor α1, actin, aldehyde dehydrogenase, SAND family, tubulin 6 and TaTa box binding protein. Phytochelatin synthase (pcs) and metallothionein (mt) encoding gene expression were induced from the first days of exposure. At low Cd stress (0.02 mM), genes were still up-regulated until 60th day of exposure. At the highest metal concentrations, however, pcs and mt gene expressions decreased. pcs encoding gene was significantly up-regulated under Cr exposure, and was more responsive to increasing Cr concentration than mt encoding gene. Moreover, exposure to Cd or Cr influenced clearly seed germination and hypocotyls elongation. Thus, the results have proved that both analyzed genes participate in metal detoxification and their expression is regulated at transcriptional level in date palm subjected to Cr and Cd stress. Consequently, variations of expression of mt and pcs genes may serve as early-warning biomarkers of metal stress in this species.

Physical risk factors identification based on body sensor network combined to videotaping.

The aim of this study was to perform an ergonomic analysis of a material handling task by combining a subtask video analysis and a RULA computation, implemented continuously through a motion capture system combining inertial sensors and electrogoniometers. Five workers participated to the experiment. Seven inertial measurement units, placed on the worker's upper body (pelvis, thorax, head, arms, forearms), were implemented through a biomechanical model of the upper body to continuously provide trunk, neck, shoulder and elbow joint angles. Wrist joint angles were derived from electrogoniometers synchronized with the inertial measurement system. Worker's activity was simultaneously recorded using video. During post-processing, joint angles were used as inputs to a computationally implemented ergonomic evaluation based on the RULA method. Consequently a RULA score was calculated at each time step to characterize the risk of exposure of the upper body (right and left sides). Local risk scores were also computed to identify the anatomical origin of the exposure. Moreover, the video-recorded work activity was time-studied in order to classify and quantify all subtasks involved into the task. Results showed that mean RULA scores were at high risk for all participants (6 and 6.2 for right and left sides respectively). A temporal analysis demonstrated that workers spent most part of the work time at a RULA score of 7 (right: 49.19 ± 35.27%; left: 55.5 ± 29.69%). Mean local scores revealed that most exposed joints during the task were elbows, lower arms, wrists and hands. Elbows and lower arms were indeed at a high level of risk during the total time of a work cycle (100% for right and left sides). Wrist and hands were also exposed to a risky level for much of the period of work (right: 82.13 ± 7.46%; left: 77.85 ± 12.46%). Concerning the subtask analysis, subtasks called 'snow thrower', 'opening the vacuum sealer', 'cleaning' and 'storing' have been identified as the most awkward for right and left sides given mean RULA scores and percentages of time spent at risky levels. Results analysis permitted to suggest ergonomic recommendations for the redesign of the workstation. Contributions of the proposed innovative system dedicated to physical ergonomic assessment are further discussed.