High-entropy polymer produces a giant electrocaloric effect at low fields.

More than a decade of research on the electrocaloric (EC) effect has resulted in EC materials and EC multilayer chips that satisfy a minimum EC temperature change of 5 K required for caloric heat pumps1-3. However, these EC temperature changes are generated through the application of high electric fields4-8 (close to their dielectric breakdown strengths), which result in rapid degradation and fatigue of EC performance. Here we report a class of EC polymer that exhibits an EC entropy change of 37.5 J kg-1 K-1 and a temperature change of 7.5 K under 50 MV m-1, a 275% enhancement over the state-of-the-art EC polymers under the same field strength. We show that converting a small number of the chlorofluoroethylene groups in poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) terpolymer into covalent double bonds markedly increases the number of the polar entities and enhances the polar-nonpolar interfacial areas of the polymer. The polar phases in the polymer adopt a loosely correlated, high-entropy state with a low energy barrier for electric-field-induced switching. The polymer maintains performance for more than one million cycles at the low fields necessary for practical EC cooling applications, suggesting that this strategy may yield materials suitable for use in caloric heat pumps.

Binding of Copper and Cisplatin to Atox1 Is Mediated by Glutathione through the Formation of Metal-Sulfur Clusters.

Copper is an essential nutrient required for many biological processes involved in primary metabolism, but free copper is toxic due to its ability to catalyze formation of free radicals. To prevent toxic effects, in the cell copper is bound to proteins and low molecular weight compounds, such as glutathione, at all times. The widely used chemotherapy agent cisplatin is known to bind to copper-transporting proteins, including copper chaperone Atox1. Cisplatin interactions with Atox1 and other copper transporters are linked to cancer resistance to platinum-based chemotherapy. Here we analyze the binding of copper and cisplatin to Atox1 in the presence of glutathione under redox conditions that mimic intracellular environment. We show that copper(I) and glutathione form large polymers with a molecular mass of approximately 8 kDa, which can transfer copper to Atox1. Cisplatin also can form polymers with glutathione, albeit at a slower rate. Analysis of simultaneous binding of copper and cisplatin to Atox1 under physiological conditions shows that both metals are bound to the protein through copper-sulfur-platinum bridges.

Dilute Nanocomposites: Tuning Polymer Chain Local Nanostructures to Enhance Dielectric Responses.

Dielectric polymers possessing high energy and low losses are of great interest for electronic and electric devices and systems. Nanocomposites in which high dielectric constant (high-K) nanofillers at high loading (>10 vol%) are admixed with polymer matrix have been investigated for decades, aiming at enhancing the dielectric performance, but with limited success. In 2017, it is discovered that reducing nanofiller loading to less than 0.5 vol% in polymer matrix can lead to marked enhancement in dielectric performance. Here, we reviewed the discoveries and advances of this unconventional approach to enhance dielectric performance of polymers. Experimental studies uncover that nanofillers lead to interfaces changes over distances larger than 100 nm. Experimental and modeling results show that introducing free volume in polymers reduces the constraints of glass matrix on dipoles in polymers, leading to enhanced K without affecting breakdown. Moreover, low-K nanofillers at low-volume loading serve as deep traps for charges, lowering conduction losses and increasing breakdown strength. The dilute nanocomposites provide new avenues for designing dielectric polymers with high K, minimal losses, and robust breakdown fields, thus achieving high energy and power density and low loss for operation over a broad temperature regime.

On-surface cyclodehydrogenation reaction pathway determined by selective molecular deuterations.

Understanding the reaction mechanisms of dehydrogenative Caryl-Caryl coupling is the key to directed formation of π-extended polycyclic aromatic hydrocarbons. Here we utilize isotopic labeling to identify the exact pathway of cyclodehydrogenation reaction in the on-surface synthesis of model atomically precise graphene nanoribbons (GNRs). Using selectively deuterated molecular precursors, we grow seven-atom-wide armchair GNRs on a Au(111) surface that display a specific hydrogen/deuterium (H/D) pattern with characteristic Raman modes. A distinct hydrogen shift across the fjord of Caryl-Caryl coupling is revealed by monitoring the ratios of gas-phase by-products of H2, HD, and D2 with in situ mass spectrometry. The identified reaction pathway consists of a conrotatory electrocyclization and a distinct [1,9]-sigmatropic D shift followed by H/D eliminations, which is further substantiated by nudged elastic band simulations. Our results not only clarify the cyclodehydrogenation process in GNR synthesis but also present a rational strategy for designing on-surface reactions towards nanographene structures with precise hydrogen/deuterium isotope labeling patterns.

Engineering Edge States of Graphene Nanoribbons for Narrow-Band Photoluminescence.

Solid-state narrow-band light emitters are on-demand for quantum optoelectronics. Current approaches based on defect engineering in low-dimensional materials usually introduce a broad range of emission centers. Here, we report narrow-band light emission from covalent heterostructures fused to the edges of graphene nanoribbons (GNRs) by controllable on-surface reactions from molecular precursors. Two types of heterojunction (HJ) states are realized by sequentially synthesizing GNRs and graphene nanodots (GNDs) and then coupling them together. HJs between armchair GNDs and armchair edges of the GNR are coherent and give rise to narrow-band photoluminescence. In contrast, HJs between the armchair GNDs and the zigzag ends of GNRs are defective and give rise to nonradiative states near the Fermi level. At low temperatures, sharp photoluminescence emissions with peak energy range from 2.03 to 2.08 eV and line widths of 2-5 meV are observed. The radiative HJ states are uniform, and the optical transition energy is controlled by the band gaps of GNRs and GNDs. As these HJs can be synthesized in a large quantity with atomic precision, this finding highlights a route to programmable and deterministic creation of quantum light emitters.

Self-organized and cu-coordinated surface linear polymerization.

We demonstrate a controllable surface-coordinated linear polymerization of long-chain poly(phenylacetylenyl)s that are self-organized into a "circuit-board" pattern on a Cu(100) surface. Scanning tunneling microscopy/spectroscopy (STM/S) corroborated by ab initio calculations, reveals the atomistic details of the molecular structure, and provides a clear signature of electronic and vibrational properties of the poly(phenylacetylene)s chains. Notably, the polymerization reaction is confined epitaxially to the copper lattice, despite a large strain along the polymerized chain that subsequently renders it metallic. Polymerization and depolymerization reactions can be controlled locally at the nanoscale by using a charged metal tip. This control demonstrates the possibility of precisely accessing and controlling conjugated chain-growth polymerization at low temperature. This finding may lead to the bottom-up design and realization of sophisticated architectures for molecular nano-devices.

Mechanism of copper(II)-induced misfolding of Parkinson's disease protein.

α-synuclein (aS) is a natively unfolded pre-synaptic protein found in all Parkinson's disease patients as the major component of fibrillar plaques. Metal ions, and especially Cu(II), have been demonstrated to accelerate aggregation of aS into fibrillar plaques, the precursors to Lewy bodies. In this work, copper binding to aS is investigated by a combination of quantum and molecular mechanics simulations. Starting from the experimentally observed attachment site, several optimized structures of Cu-binding geometries are examined. The most energetically favorable attachment results in significant allosteric changes, making aS more susceptible to misfolding. Indeed, an inverse kinematics investigation of the configuration space uncovers a dynamically stable ß-sheet conformation of Cu-aS that serves as a nucleation point for a second ß-strand. Based on these findings, we propose an atomistic mechanism of copper-induced misfolding of aS as an initial event in the formation of Lewy bodies and thus in PD pathogenesis.

Insights into prion protein function from atomistic simulations.

Computer simulations are a powerful tool for studies of biological systems. They have often been used to study prion protein (PrP), a protein responsible for neurodegenerative diseases, which include "mad cow disease" in cattle and Creutzfeldt-Jacob disease in humans. An important aspect of the prion protein is its interaction with copper ion, which is thought to be relevant for PrP's yet undetermined function and also potentially play a role in prion diseases. for studies of copper attachment to the prion protein, computer simulations have often been used to complement experimental data and to obtain binding structures of Cu-PrP complexes. This paper summarizes the results of recent ab initio calculations of copper-prion protein interactions focusing on the recently discovered concentration-dependent binding modes in the octarepeat region of this protein. In addition to determining the binding structures, computer simulations were also used to make predictions about PrP's function and the role of copper in prion diseases. The results demonstrate the predictive power and applicability of ab initio simulations for studies of metal-biomolecular complexes.

Doping-dependent negative differential resistance in hybrid organic/inorganic Si-porphyrin-Si junctions.

Quantum transport properties of porphyrin-bridged p-n junctions with Si leads are investigated by ab initio calculations. It is shown that this system exhibits strong negative differential resistance (NDR) peaks, whose magnitude and position can be controlled by the doping levels of the leads and by changing the central transition metal atom of the porphyrin. These results are explained by bias-induced on-off switching of resonant tunneling channels associated with specific molecular orbitals. The predicted behavior is general and should be observable for other organic molecules bridging doped semiconducting leads.