Multiplex micro-SERS imaging of cancer-related markers in cells and tissues using poly(allylamine)-coated Au@Ag nanoprobes.

Surface-enhanced Raman scattering (SERS) nanoprobes based on Au@Ag core@shell nanoparticles coated with poly(allylamine) were functionalized with small targeting molecules to evaluate simultaneously the level of expression of two cancer-related markers, both in cells and in tissues. The Au@Ag nanoparticles provide a high SERS signal enhancement in the visible range when combined with resonant Raman-active molecules. The poly(allylamine) coating plays a dual key role in (i) protecting the metal surface against the complex biological medium, leading to a stable signal of the Raman-active molecules, and (ii) enabling specific biofunctionalization through its amine functions. Using small targeting molecules linked to the polymer coating, two different nanoprobes (duplex approach) were designed. Each was able to specifically target a particular cancer-related marker: folate receptors (FRs) and sialic acid (SA). We demonstrate that the level of expression of these targeted markers can be evaluated following the SERS signal of the probes incubated on cells or tissues. The potential overexpression of folate receptors and of sialic acid was evaluated and measured in breast and ovarian cancerous tissue sections. In addition, FR and/or SA overexpression in the tumor region can be visualized with high contrast with respect to the healthy region and with high spatial accuracy consistent with histology by SERS imaging of the nanoprobe signal. Owing to the unique spectral signature of the designed nanoprobes, this approach offers an efficient tool for the spatially resolved, in situ measurement of the expression level of several cancer-related markers in tumors at the same time.Graphical abstract.

OLFM4, KNG1 and Sec24C identified by proteomics and immunohistochemistry as potential markers of early colorectal cancer stages.

BACKGROUND: Despite recent advances in colorectal cancer (CRC) diagnosis and population screening programs, the identification of patients with preneoplastic lesions or with early CRC stages remains challenging and is important for reducing CRC incidence and increasing patient's survival. METHODS: We analysed 76 colorectal tissue samples originated from early CRC stages, normal or inflamed mucosa by label-free proteomics. The characterisation of three selected biomarker candidates was performed by immunohistochemistry on an independent set of precancerous and cancerous lesions harbouring increasing CRC stages. RESULTS: Out of 5258 proteins identified, we obtained 561 proteins with a significant differential distribution among groups of patients and controls. KNG1, OLFM4 and Sec24C distributions were validated in tissues and showed different expression levels especially in the two early CRC stages compared to normal and preneoplastic tissues. CONCLUSION: We highlighted three proteins that require further investigations to better characterise their role in early CRC carcinogenesis and their potential as early CRC markers.

Selected protein monitoring in histological sections by targeted MALDI-FTICR in-source decay imaging.

Matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI MSI) is a rapidly growing method in biomedical research allowing molecular mapping of proteins on histological sections. The images can be analyzed in terms of spectral pattern to define regions of interest. However, the identification and the differential quantitative analysis of proteins require off line or in situ proteomic methods using enzymatic digestion. The rapid identification of biomarkers holds great promise for diagnostic research, but the major obstacle is the absence of a rapid and direct method to detect and identify with a sufficient dynamic range a set of specific biomarkers. In the current work, we present a proof of concept for a method allowing one to identify simultaneously a set of selected biomarkers on histological slices with minimal sample treatment using in-source decay (ISD) MSI and MALDI-Fourier transform ion cyclotron resonance (FTICR). In the proposed method, known biomarkers are spotted next to the tissue of interest, the whole MALDI plate being coated with 1,5-diaminonaphthalene (1,5-DAN) matrix. The latter enhances MALDI radical-induced ISD, providing large tags of the amino acid sequences. Comparative analysis of ISD fragments between the reference spots and the specimen in imaging mode allows for unambiguous identification of the selected biomarker while preserving full spatial resolution. Moreover, the high resolution/high mass accuracy provided by FTICR mass spectrometry allows the identification of proteins. Well-resolved peaks and precise measurements of masses and mass differences allow the construction of reliable sequence tags for protein identification. The method will allow the use of MALDI-FTICR MSI as a method for rapid targeted biomarker detection in complement to classical histology.

An analytical pipeline for MALDI in-source decay mass spectrometry imaging.

In-source decay (ISD) fragmentation as combined with matrix-assisted laser desorption/ionization (MALDI) mass spectrometry allows protein sequencing directly from mass spectra. Acquisition of MALDI-ISD mass spectra from tissue samples is achieved using an appropriate MALDI matrix, such as 1,5-diaminonaphthalene (DAN). Recent efforts have focused on combining MALDI-ISD with mass spectrometry imaging (MSI) to provide simultaneous sequencing and localization of proteins over a thin tissue surface. Successfully coupling these approaches requires the development of new data analysis tools, but first, investigating the properties of MALDI-ISD as applied to mixtures of protein standards reveals a high sensitivity to the relative protein ionization efficiency. This finding translates to the protein mixtures found in tissues and is used to inform the development of an analytical pipeline for data analysis in MALDI-ISD MS imaging, including software to identify the most pertinent spectra, to sequence protein mixtures, and to generate ion images for comparison with tissue morphology. The ability to simultaneously identify and localize proteins is demonstrated by using the analytical pipeline on three tissue sections from porcine eye lens, resulting in localizations for crystallins and cytochrome c. The variety of protein identifications provided by MALDI-ISD-MSI between tissue sections creates a discovery tool, and the analytical pipeline makes this process more efficient.

MALDI-in source decay applied to mass spectrometry imaging: a new tool for protein identification.

Matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) imaging is a powerful technique giving access to the distribution of a large range of biomolecules directly from a tissue section, allowing, for example, the discovery of new pathological biomarkers. Nevertheless, one main difficulty lies in the identification of the detected species, especially proteins. MALDI-in source decay (ISD) is used to fragment ions directly in the mass spectrometer ion source. This technique does not require any special sample treatment but only the use of a specific MALDI matrix such as 2,5-dihydroxybenzoic acid or 1,5-diaminonaphthalene. MALDI-ISD is generally employed on classical, purified samples, but here we demonstrate that ISD can also be performed directly on mixtures and on a tissue slice leading to fragment ions, allowing the identification of major proteins without any further treatment. On a porcine eye lens slice, de novo sequencing was even performed. Crystallins not yet referenced in databases were identified by sequence homology with other mammalian species. On a mouse brain slice, we demonstrate that results obtained with ISD are comparable and even better than those obtained with a classical in situ digestion.

Biocompatibility of polymer-infiltrated-ceramic-network (PICN) materials with Human Gingival Keratinocytes (HGKs).

OBJECTIVE: Biocompatibility of polymer-infiltrated-ceramic-network (PICN) materials, a new class of CAD-CAM composites, is poorly explored in the literature, in particular, no data are available regarding Human Gingival Keratinocytes (HGK). The first objective of this study was to evaluate the in vitro biocompatibility of PICNs with HGKs in comparison with other materials typically used for implant prostheses. The second objective was to correlate results with PICN monomer release and indirect cytotoxicity. METHODS: HGK attachment, proliferation and spreading on PICN, grade V titanium (Ti), yttrium zirconia (Zi), lithium disilicate glass-ceramic (eM) and polytetrafluoroethylene (negative control) discs were evaluated using a specific insert-based culture system. For PICN and eM samples, monomer release in the culture medium was quantified by high performance liquid chromatography and indirect cytotoxicity tests were performed. RESULTS: Ti and Zi exhibited the best results regarding HGK viability, number and coverage. eM showed inferior results while PICN showed statistically similar results to eM but also to Ti regarding cell number and to Ti and Zi regarding cell viability. No monomer release from PICN discs was found, nor indirect cytotoxicity, as for eM. SIGNIFICANCE: The results confirmed the excellent behavior of Ti and Zi with gingival cells. Even if polymer based, PICN materials exhibited intermediate results between Ti-Zi and eM. These promising results could notably be explained by PICN high temperature-high pressure (HT-HP) innovative polymerization mode, as confirmed by the absence of monomer release and indirect cytotoxicity.

Photoreversibility and Biocompatibility of Polydimethylsiloxane-Coumarin as Adjustable Intraocular Lens Material.

Polydimethylsiloxane (PDMS) constitutes an interesting material for a variety of biomedical applications, especially as intraocular lenses (IOLs), for its excellent transparency. In this work, a photoreversible PDMS-coumarin network, whose shape and properties can be adjusted postoperatively in a noninvasive manner, is developed. The synthesis of PDMS-coumarin is achieved by amidation of a coumarin acid chloride derivative with amine-functionalized PDMSs. Under exposure of λ > 300 nm, these polymers can be cured by dimerization of coumarin. The cured polymers can be uncrosslinked via photocleavage of cyclobutane dimers upon illumination at λ < 290 nm. The diffusion of linear PDMSs in a crosslinked network and the controlled shape modification are studied, which demonstrate that these polymers are good candidates for adjustable IOL application. IOL disks prepared from these materials show high hydrophobicity and good transparency. In vitro cytotoxicity, lens epithelial cell adhesion assays, and rabbit host reaction against implanted disks demonstrate the biocompatibility of the polymer.

Evaluation of a class of polyurethane materials for intraocular lens manufacturing.

Ophthalmic lenses are medical devices with considerable requirements in terms of optical, biomechanical and biological performance. There is limited number of materials used for their manufacturing, comprising mainly silicones and poly(meth)acrylates. This series of publications aims at investigating the applicability of thermoplastic polyurethane elastomers (TPU) for the manufacturing of ophthalmic lenses and examining the properties of the respective devices. This study is related to the synthesis of TPUs with chemical compositions that comprise chemically grafted filters for the hazardous-light. GC-MS, attenuated total reflectance Fourier transform infrared spectroscopy, and UV-vis spectroscopies confirmed the reaction completion and the beneficial effect of the filters on the light transmittance, respectively. Relatively high refractive index of the material was measured and allows for the manufacturing of thinner lenses. The contrast sensitivity determined for a model intraocular lens (IOL) was satisfactory. Few optical defects were, however, present on the model lens prepared by thermoplastic injection molding. The elasticity of the materials was evaluated in view to their potential applicability as foldable IOLs by determining their glass transition temperature and their Young modulus and measuring their shore A. The TPU materials demonstrated more bioadhesive character compared with a benchmark hydrophilic acrylic reference material, which is already used for IOL manufacturing.

Comparison of two FFPE preparation methods using label-free shotgun proteomics: Application to tissues of diverticulitis patients.

Formalin-fixed paraffin-embedded (FFPE) specimens of patients are useful sources of materials for clinical research and have recently gained interest for use in the discovery of clinical proteomic biomarkers. However, the critical step in this field is the ability to obtain an efficient and repeatable extraction using the limited quantities of material available for research in hospital biobanks. This work describes the evaluation of the peptide/protein extraction using FFPE sections treated by the following two methods before shotgun proteomic analysis: a commercial solution (FFPE-FASP) (filter aided sample preparation) and an antigen retrieval-derived protocol (On Slice AR). Their efficiencies and repeatabilities are compared using data-independent differential quantitative label-free analysis. FFPE-FASP was shown to be globally better both qualitatively and quantitatively than On Slice AR. FFPE-FASP was tested on several samples, and differential analysis was used to compare the tissues of diverticulitis patients (healthy and inflammatory tissues). In this differential proteomic analysis using retrospective clinical FFPE material, FFPE-FASP was reproducible and provided a high number of confident protein identifications, highlighting potential protein biomarkers. BIOLOGICAL SIGNIFICANCE: In clinical proteomics, FFPE is an important resource for retrospective analysis and for the discovery of biomarkers. The challenge for FFPE shotgun proteomic analysis is preparation by an efficient and reproducible protocol, which includes protein extraction and digestion. In this study, we analyzed two different methods and evaluated their repeatabilities and efficiencies. We illustrated the reproducibility of the most efficient method, FFPE-FASP, by a pilot study on diverticulitis tissue and on FFPE samples amount accessible in hospital biobanks. These data showed that FFPE is suitable for use in clinical proteomics, especially when the FFPE-FASP method is combined with label-free shotgun proteomics as described in the workflow presented in this work.

RGD surface functionalization of the hydrophilic acrylic intraocular lens material to control posterior capsular opacification.

Posterior Capsular Opacification (PCO) is the capsule fibrosis developed on implanted IntraOcular Lens (IOL) by the de-differentiation of Lens Epithelial Cells (LECs) undergoing Epithelial Mesenchymal Transition (EMT). Literature has shown that the incidence of PCO is multifactorial including the patient's age or disease, surgical technique, and IOL design and material. Reports comparing hydrophilic and hydrophobic acrylic IOLs have shown that the former has more severe PCO. On the other hand, we have previously demonstrated that the adhesion of LECs is favored on hydrophobic compared to hydrophilic materials. By combining these two facts and contemporary knowledge in PCO development via the EMT pathway, we propose a biomimetically inspired strategy to promote LEC adhesion without de-differentiation to reduce the risk of PCO development. By surface grafting of a cell adhesion molecule (RGD peptide) onto the conventional hydrophilic acrylic IOL material, the surface-functionalized IOL can be used to reconstitute a capsule-LEC-IOL sandwich structure, which has been considered to prevent PCO formation in literature. Our results show that the innovative biomaterial improves LEC adhesion, while also exhibiting similar optical (light transmittance, optical bench) and mechanical (haptic compression force, IOL injection force) properties compared to the starting material. In addition, compared to the hydrophobic IOL material, our bioactive biomaterial exhibits similar abilities in LEC adhesion, morphology maintenance, and EMT biomarker expression, which is the crucial pathway to induce PCO. The in vitro assays suggest that this biomaterial has the potential to reduce the risk factor of PCO development.

Biointerface multiparametric study of intraocular lens acrylic materials.

PURPOSE: To compare hydrophilic and hydrophobic acrylic materials designed for intraocular lenses in a multiparametric investigation in a liquid environment to highlight their properties in terms of adhesion forces, lens epithelial cell (LEC) adhesion, and tissue response as indicators of the risk for posterior capsule opacification (PCO) development. SETTING: University of Liège, Liège, Belgium. DESIGN: Experimental study. METHODS: The hydrophobicity and surface adhesion force were assessed using contact-angle and atomic force microscopy measurements. The bioadhesiveness of the disks and the tissue response were determined by in vitro experiments using bovine serum albumin and porcine LECs and by in vivo rabbit subcutaneous implantation, respectively. RESULTS: Increasing surface hydrophobicity led to a greater surface-adhesion force and greater LEC adhesion. After 1 month, the rabbit subcutaneous implants showed a similar thin layer of fibrous capsule surrounding the disks without extensive inflammation. A layer of rounded cells in contact with disks was detected on the hydrophobic samples only. CONCLUSIONS: Hydrophobic acrylic disks that have been associated with a reduced risk for PCO in clinical studies showed increased tackiness. FINANCIAL DISCLOSURES: Proprietary or commercial disclosures are listed after the references.

Assessment of new-generation glistening-free hydrophobic acrylic intraocular lens material.

PURPOSE: To determine the hydrophobic, antiglistening, and bioadhesiveness properties of a new polymer, GF raw material, and to determine the suitability of this material for use in intraocular lenses (IOLs). SETTING: University of Liege, Liege, Belgium. DESIGN: Experimental study. METHODS: Intraocular lenses made of the new hydrophobic acrylic material were tested and compared with reference acrylic materials. The stability of their polymer matrix was estimated by testing for glistenings. The relative surface hydrophobicity was quantified via contact-angle measurements. The degrees of bioadhesiveness of the reference and test materials were assessed by in vitro porcine lens epithelial cell (LEC) culture. RESULTS: The glistening test showed that the new material had greater stability under worst-case conditions than previous-generation hydrophobic acrylic materials. The new polymer had the same hydrophobic properties as the hydrophobic Acrysof IQ SN60WF material; both materials were less hydrophobic than the hydrophobic Sensar AR40e material and more hydrophobic than the hydrophilic Ioflex IOL material. The in vitro bioadhesiveness tests showed that porcine LEC adhesion levels of the new material were intermediate with respect to those of the 2 reference hydrophobic materials. CONCLUSIONS: When equilibrated in aqueous medium, the new-generation hydrophobic acrylic material reached a low water content at equilibrium, making it glistening free. The hydrophobicity and bioadhesiveness of the new raw material were comparable to those of state-of-the-art reference materials; these properties may resist the formation of posterior capsule opacification. FINANCIAL DISCLOSURE: Dr. Pagnoulle has a proprietary interest in the GF material. Drs. Pagnoulle, Gobin, and Bozukova are employees of Physiol S.A. Mme. V. Bertrand and Dr. Gillet-De Pauw have no financial or proprietary interest in any material or method mentioned.

Identification and quantification of concentration-dependent biomarkers in MCF-7/BOS cells exposed to 17ß-estradiol by 2-D DIGE and label-free proteomics.

This paper reports the identification of biomarkers resulting from the exposure of MCF-7/BOS cells to 17ß-estradiol (E(2)). The biomarkers were identified using 2 independent and complementary techniques, 2-D DIGE/MALDI-TOF peptide mass fingerprint, and 2-D UPLC-ESI MS/MS. They were identified from the cytosolic fractions of cells treated for 24h with mitogenic concentrations of 1, 30 and 500 pM of 17ß-estradiol. Five biomarkers were up-regulated proteins, namely HSP 74, EF2, FKBP4, EF1 and GDIB and one was a down-regulated protein, namely K2C8. Three of these proteins, EF2, FKBP4 and K2C8 are implicated in a network centered on the estrogen receptors ESR1 and ESR2 as well as on AKT1. After the discovery phase, three biomarkers were selected to test the presence of estrogens using selected reaction monitoring (SRM). They were monitored using SRM after incubation of MCF-7/BOS in the presence of E(2) for confirmation or selected xenoestrogens. Daidzein, coumestrol and enterolactone induced an up-regulation of EF2 and FKPB4 proteins, while tamoxifen and resveratrol induced a down-regulation. The exposure of all phytoestrogens induced the down-regulation of K2C8. These markers form a preliminary molecular signature that can be used when testing the estrogenic activity of xenobiotics, either pure or in mixtures.