Assessment of the status of municipal solid waste management in metro cities, state capitals, class I cities, and class II towns in India: an insight.

Solid waste management is one of the most challenging issues in urban cities, which are facing a serious pollution problem due to the generation of huge quantities of solid waste. This paper presents an assessment of the existing situation of municipal solid waste management (MSWM) in major cities in India. The quantity and composition of MSW vary from place to place, and bear a rather consistent correlation with the average standard of living. Extensive field investigations were carried out for quantification, analysis of physical composition, and characterization of MSW in each of the identified cities. The MSW management status (per the MSW Rules, 2000) has also been assessed, and an action plan for better management has been formulated; both are presented in this paper. Studies carried out in 59 selected cities in India have revealed that there are many shortcomings in the existing practices used in managing the MSW. These shortcomings pertain mainly to inadequate manpower, financial resources, implements, and machinery required for effectively carrying out various activities for MSWM. To overcome the deficiencies in the existing MSWM systems, an indicative action plan has been presented incorporating strategies and guidelines. Based on this plan, municipal agencies can prepare specific action plans for their respective cities.

Microbial dynamics and enzyme activities during rapid composting of municipal solid waste - a compost maturity analysis perspective.

An investigation was carried out in the laboratory to find out the microbial dynamics and enzyme activities during rapid composting of municipal solid waste (MSW). Various treatments such as aeration (A), addition of chemical agents (glucose (G) and acetic acid (AA) and application of cellulolytic microbial (M) inoculum (Phanerochaete chrysosporium and Trichoderma reesei) were used to facilitate the decomposition of MSW. The result of the present investigation revealed that the degradation of organic substrates were quick (within 9-12 days) in case of rapid composting as indicated by the reduction (below 20) in C/N ratio. Whereas, normal composting took more than 20 days to attain C/N ratio of below 20. Estimation of selected enzymes (amylase, protease, phosphatase and cellulase) provided information on the substrate specific degradation profiles of various labile substrates contained in organic waste.

Effect of heavy metals on earthworm activities during vermicomposting of municipal solid waste.

The effect of heavy metals on the activities of earthworm species Eudrillus eugineae was studied during vermicomposting of municipal solid waste (MSW) spiked with heavy metals. The activities of earthworms, in terms of growth and biomass production and number of cocoons produced, were monitored periodically, and the concentration of heavy metals in earthworms and substrates was determined at definite intervals. Laboratory-scale experiments were performed by mixing individual heavy metals in MSW. Copper, cadmium, chromium, lead, and zinc were selected for the study. The study concludes that heavy metals tend to accumulate in the body of earthworms; hence, the inherent concentration of heavy metals in the substrate before vermicomposting must be considered in view of composting of MSW and its application to soil. It was observed that copper and cadmium were toxic for the worms at 1.5 and 0.1 g/kg of the waste, respectively. The studies also suggest that earthworms are susceptible to the free form of heavy metals. Cadmium is the most toxic metal, followed by copper. Based on the investigation and observation, it was also found that earthworms should be separated from castings before the use of castings in soil amendments.

Studies on acidification in two-phase biomethanation process of municipal solid waste.

Biomethanation of municipal solid waste (MSW) is a slow process and the yield of biogas is usually low. Enhancement of acidification is necessary to increase the biogas yield in biomethanation of MSW. MSW contains a significant fraction of ligno-cellulosic material. The acidification of these materials influences the biogas yield. In the present study, hydrolysis and acidification have been considered as a combined phase. Experiments have been conducted to study the effect of recirculation of leachate on the acidification stage of the two-phase biomethanation process. Chemical oxygen demand (COD) and volatile fatty acid (VFA) were considered as indicator parameters. The study was also conducted to investigate the effect of using acid and alkali solution of 0.1% concentration in the acidification study. It was observed that daily recirculation of leachate does not have any major impact on the acidification process. It was also observed that treatment of MSW with sodium hydroxide yields leachate of significantly higher COD and VFA values compared to others.

Characterization of municipal solid waste in high-altitude sub-tropical regions.

Solid waste management (SWM) is one of the most challenging issues owing to lack of authentic data on different elements of SWM, namely, storage, collection, transportation, separation, processing and disposal. This study presents an assessment of existing status of SWM in conjunction with municipal solid waste (MSW) generation rates, physical and chemical characterization of MSW in high-altitude sub-tropical regions. Weighing of empty and fully loaded trucks per trip revealed total quantity of MSW collected. The average efficiency of MSW collection was 70%. From the baseline data, it is inferred that the population and MSW generation rates are not co-related. The collected MSW included biodegradables (organic wastes), paper, plastic, glass, ceramics, metals, inert materials, ash and debris. The data analysis indicated that the biodegradable components dominate the characterization at 54.83% followed by inert, ash and debris at 21.06%, paper at 8.77%, plastic at 8.18%, glass and ceramics at 4.45% and metals at 2.71%. Statistical measures were also applied and 90% confidence interval (CI) was generated for the characterization data measuring its statistical significance.

GIS based solid waste management information system for Nagpur, India.

Solid waste management is one of the major problems of today's world and needs to be addressed by proper utilization of technologies and design of effective, flexible and structured information system. Therefore, the objective of this paper was to design and develop a GIS based solid waste management information system as a decision making and planning tool for regularities and municipal authorities. The system integrates geo-spatial features of the city and database of existing solid waste management. GIS based information system facilitates modules of visualization, query interface, statistical analysis, report generation and database modification. It also provides modules like solid waste estimation, collection, transportation and disposal details. The information system is user-friendly, standalone and platform independent.

Treatment and disposal of refinery sludges: Indian scenario.

Crude oil is a major source of energy and feedstock for petrochemicals. Oily sludge, bio-sludge and chemical sludge are the major sludges generated from the processes and effluent treatment plants of the refineries engaged in crude oil refining operations. Refineries in India generate about 28,220 tons of sludge per annum. Various types of pollutants like phenols, heavy metals, etc. are present in the sludges and they are treated as hazardous waste. Oily sludge, which is generated in much higher amount compared to other sludges, contains phenol (90-100 mg/kg), nickel (17-25 mg/kg), chromium (27-80 mg/kg), zinc (7-80 mg/kg), manganese (19-24 mg/kg), cadmium (0.8-2 mg/kg), copper (32-120 mg/kg) and lead (0.001-0.12 mg/ kg). Uncontrolled disposal practices of sludges in India cause degradation of environmental and depreciation of aesthetic quality. Environmental impact due to improper sludge management has also been identified. Salient features of various treatment and disposal practices have been discussed. Findings of a case study undertaken by the authors for Numaligarh Refinery in India have been presented. Various system alternatives have been identified for waste management in Numaligarh Refinery. A ranking exercise has been carried out to evaluate the alternatives and select the appropriate one. A detailed design of the selected waste management system has been presented.