Designing of potent anti-diabetic molecules by targeting SIK2 using computational approaches.

Diabetes mellitus (DM) is one of the major health problems worldwide. WHO have estimated that 439 million people may have DM by the year 2030. Several classes of drugs such as sulfonylureas, meglitinides, thiazolidinediones etc. are available to manage this disease, however, there is no cure for this disease. Salt inducible kinase 2 (SIK2) is expressed several folds in adipose tissue than in normal tissues and thus SIK2 is one of the attractive targets for DM treatment. SIK2 inhibition improves glucose homeostasis. Several analogues have been reported and experimentally proven against SIK for DM treatment. But, identifying potential SIK2 inhibitors with improved efficacy and good pharmacokinetic profiles will be helpful for the effective treatment of DM. The objective of the present study is to identify selective SIK2 inhibitors with good pharmacokinetic profiles. Due to the unavailability of SIK2 structure, the modeled structure of SIK2 will be an important to understand the atomic level of SIK2 inhibitors in the binding site pocket. In this study, different molecular modeling studies such as Homology Modeling, Molecular Docking, Pharmacophore-based virtual screening, MD simulations, Density Functional Theory calculations and WaterMap analysis were performed to identify potential SIK2 inhibitors. Five molecules from different databases such as Binding_4067, TosLab_837067, NCI_349155, Life chemicals_ F2565-0113, Enamine_7623111186 molecules were identified as possible SIK2 inhibitors.

Design of novel PhMTNA inhibitors, targeting neurological disorder through homology modeling, molecular docking, and dynamics approaches.

Vanishing white matter (VWM) is a hereditary human disease, mostly prevalent in childhood caused by the defects in the eukaryotic initiation factor beta subunits. It is the first disease involved in the translation initiation factor, eIF2B. There is no specific treatment for VWM which mainly affect the brain and ovaries. The gray matter remains normal in all characteristics while the white matter changes texture, coming to the pathophysiology, many initiation factors are involved in the initiation of translation of mRNAs into polypeptides. In this study, the three-dimensional structure of PhMTNA protein was modeled and the stability ascertained through Molecular dynamic simulation (MDS) for 100 ns. The active site residues are conserved with the reported BsMTNA structure which is also confirmed through sitemap prediction. Through virtual screening and induced fit docking, top five leads against PhMTNA protein was identified based on their binding mode and affinity. ADME properties and DFT (Density Functional Theory) studies of these compounds were studied. In addition to that, computational mutagenesis studies were performed to identify the hotspot residues involved in the protein-ligand interactions. Overall analysis showed that the compound NCI_941 has a highest binding energy of -46.256 kcal mol-1 in the Arg57Ala mutant. Thus, the results suggest that NCI_941 would act as a potent inhibitor against PhMTNA protein.

ß-lactam substituted polycyclic fused pyrrolidine/pyrrolizidine derivatives eradicate C. albicans in an ex vivo human dentinal tubule model by inhibiting sterol 14-α demethylase and cAMP pathway.

BACKGROUND: Further quest for new anti-fungal compounds with proven mechanisms of action arises due to resistance and dose limiting toxicity of existing agents. Among the human fungal pathogens C. albicans predominate by infecting several sites in the body and in particular oral cavity and root canals of human tooth. METHODS: In the present study, we screened a library of ß-lactam substituted polycyclic fused pyrrolidine/pyrrolizidine compounds against Candida sp. Detailed molecular studies were carried out with the active compound 3 on C. albicans. Morphological damage and antibiofilm activity of compound 3 on C. albicans was studied using scanning electron microscopy (SEM). Biochemical evidence for membrane damage was studied using flow cytometry. In silico docking studies were carried out to elucidate the mechanism of action of compound 3. Further, the antifungal activity of compound 3 was evaluated in an ex vivo dentinal tubule infection model. RESULTS: Screening data showed that several new compounds were active against Candida sp. Among them, Compound 3 was most potent and exerted time kill effect at 4h, post antifungal effect up to 6h. When used in combination with fluconazole or nystatin, compound 3 revealed an minimum inhibitory concentration (MIC) decrease by 4 fold for both drugs used. In-depth molecular studies with compound 3 on C. albicans showed that this compound inhibited yeast to hyphae (Y-H) conversion and this involved the cAMP pathway. Further, SEM images of C. albicans showed that compound 3 caused membrane damage and inhibited biofilm formation. Biochemical evidence for membrane damage was confirmed by increased propidium iodide (PI) uptake in flow cytometry. Further, in silico studies revealed that compound 3 docks with the active site of the key enzyme 14-α-demethylase and this might inhibit ergosterol synthesis. In support of this, ergosterol levels were found to be decreased by 32 fold in compound 3 treated samples as analyzed by high performance liquid chromatography (HPLC). Further, the antifungal activity of compound 3 was evaluated in an ex vivo dentinal tubule infection model, which mimics human tooth root canal infection. Confocal laser scanning microscopy studies showed 83% eradication of C. albicans and a 6 log reduction in colony forming unit (CFU) after 24h treatment in the infected tooth samples in this model. CONCLUSION: Compound 3 was found to be very effective in eradicating C. albicans by inhibiting cAMP pathway and ergosterol biosynthesis. GENERAL SIGNIFICANCE: The results of this study can pave the way for developing new antifungal agents with well deciphered mechanisms of action and can be a promising antifungal agent or medicament against root canal infection.

Mechanical insights of oxythiamine compound as potent inhibitor for human transketolase-like protein 1 (TKTL1 protein).

Transketolase is a connecting link between glycolytic and pentose phosphate pathway, which is considered as the rate-limiting step due to synthesis of large number of ATP molecule and it can be proposed as a plausible target facilitating the growth of cancerous cells suggesting its potential role in cancer. Oxythiamine, an antimetabolite has been proved to be an efficient anticancerous compound in vitro, but its structural elucidation of the inhibitory mechanism has not yet been done against the human transketolase-like 1 protein (TKTL1). The three-dimensional (3D) structure of TKTL1 protein was modeled and subjected for refinement, stability and validation. Based on the reported homologs of transketolase (TKT), the active site residues His46, Ser49, Ser52, Ser53, Ile56, Leu82, Lys84, Leu123, Ser125, Glu128, Asp154, His160, Thr216 and Lys218 were identified and considered for molecular-modeling studies. Docking studies reveal the H-bond interactions with residues Ser49 and Lys218 that could play a major role in the activity of TKTL1. Molecular dynamics (MD) simulation study was performed to reveal the comparative stability of both native and complex forms of TKTL1. MD trajectory at 30 ns, confirm the role of active site residues Ser49, Lys84, Glu128, His160 and Lys218 in suppressing the activity of TKTL1. Glu128 is observed to be the most important residue for deprotonation state of the aminopyrimidine moiety and preferred to be the site of inhibitory action. Thus, the proposed mechanism of inhibition through in silico studies would pave the way for structure-oriented drug designing against cancer.

A microfluidic route for synthesis of scandium oxide microspheres, their characterization and neutron activation.

Radioactive scandium-46 microspheres have applications in mapping flow in a chemical reactor through a technique known as radioactive particle tracking (RPT). In the present study a novel microfluidic method has been developed for synthesis of controlled size scandium oxide microspheres. An inline/in-situ mixing of the scandium precursor and gelling agents was implemented which makes the microfluidic platform amenable for truly continuous operation. Microspheres of size varying from 937 to 666 µm were produced by varying O/A ratio from 10 to 30. Perfectly spherical and monodispersed (PDI <10 %) microspheres were obtained at O/A 15 and beyond. The morphology, elemental composition, and structure of the microspheres were analysed by SEM, EDS and XRD, respectively. Subsequently the microspheres were irradiated with thermal neutrons in a nuclear reactor to obtain radioactive Sc-46 oxide microspheres. The activity produced on each Sc-46 microspheres with different sizes was in the range 19.5-34.0 MBq.

Investigation of flow dynamics of molten glass in different solar glass production units using radiotracer method.

A radiotracer investigation was previously carried out to characterize the flow of the molten glass and to identify the cause of poor quality of the glass sheets produced in an industrial solar glass production unit (SGPU-1) (Pant et al., 2016). Based on the investigations, several flow abnormalities were identified and the design of the unit was modified to improve the quality of the product and meet the product specifications. Subsequently, the radiotracer investigation was repeated in the modified unit (SGPU-1m). The results of the study showed that the dead volume and homogenization time in the modified unit were significantly reduced with improvement in mixing of the molten glass as compared to the SGPU-1. Based on the results of the two investigations, a new glass production unit (SGPU-2) with enhanced capacity was designed, fabricated and commissioned. The radiotracer investigation was repeated in the newly designed unit with an objective to evaluate and validate its design. The results indicated that the performance of SGPU-2 was as per the design criteria and the quality of the glass sheets produced was as per the desired specifications.

Discovery of potent Camkk1 kinase inhibitors through e-pharmacophore and molecular screening approaches.

Diabetes is recognized as a major health problem and according to WHO estimates global prevalence of diabetes is expected to increase from 171 million in 2000 to 366 million in 2030, among which 21.7% will be Indians. The chronic nature of diabetes leads to several metabolic complications like kidney failure, cardiac problems and hypertension, etc.Camkk family members are attractive and emerging targets for the development of anti-diabetic drugs. However, the selectivity of inhibitors is a crucial property as a lack of selectivity could lead to serious adverse effects. STO-609 recently reported the role of Camkks a as potent inhibitor. In this study, Combined Molecular Docking and Pharmacophore Mapping were employed to identify potent lead molecules. E-Pharmacophore based virtual screening was performed against commercially available databases to identify the best lead molecule which was docked with the targets and analyzed for the binding pattern. Also, ADME and density function theory (DFT) studies of the compound were performed and the hits that showed good binding to the active sites and that matched with the pharmacophore models were considered as possible functional molecules against Camkk1. The results from e-pharmacophore based virtual screening and MD simulations evidenced that the top three compounds namely (Lifechemicals_1, Zinc_0910993 and Binding_10131) will be a promising inhibitor for Camkk1 family.Communicated by Ramaswamy H. Sarma.

Preparation and characterization of cobalt-60 glass microspheres for radioactive particle tracking applications.

The current work describes development and optimization of a process for preparation of cobalt-60 glass microspheres. These microspheres have potential for applications in radioactive particle tracking (RPT) studies in multiphase flow systems. In the first step of preparation, soda lime glass containing 5-10 wt% cobalt oxide was produced through melt-quench method. Subsequently, cobalt glass microspheres (CMSs) were prepared by microwave heating of tiny glass grains in presence of graphite. In the final step, radioactive cobalt-60 microspheres (RMSs) were produced by neutron irradiation of the CMSs in a nuclear reactor. The CMSs were characterized for surface morphology, elemental composition, homogeneity, crystalinity using SEM, EDX and XRD, respectively. The thermal behaviour of the microspheres was characterized by TG and DSC analysis. The size distribution of CMSs analyzed by SEM was found to be in the range 500-2000 µm. The preparation step was optimized to produce adequate activity in a single microsphere, so that they can be utilized for RPT applications.

Water Mapping and Scoring Approaches to Predict the Role of Hydration Sites in the Binding Affinity of PAK1 Inhibitors.

AIM: This study aims to develop and establish a computational model that can identify potent molecules for p21-activating kinase 1 (PAK1) Background: PAK1 is a well-established drug target that has been explored for various therapeutic interventions. Control of this protein requires an indispensable inhibitor to curb the structural changes and subsequent activation of signalling effectors responsible for the progression of diseases, such as cancer, inflammatory, viral, and neurological disorders. OBJECTIVE: The study aims to establish a computational model that could identify active molecules which will further provide a platform for developing potential PAK1 inhibitors. METHODS: A congeneric series of 27 compounds were considered for this study, with Ki (nm) covering a minimum of 3 log range. The compounds were developed based on a previously reported Group-I PAK inhibitor, namely G-5555. The 27 compounds were subjected to the SP and XP mode of docking to understand the binding mode, its conformation and interaction patterns. To understand the relevance of biological activity from computational approaches, the compounds were scored against generated water maps to obtain WM/MM ΔG binding energy. Moreover, molecular dynamics analysis was performed for the highly active compound to understand the conformational variability and stability of the complex. We then evaluated the predictable binding pose obtained from the docking studies. RESULTS: From the SP and XP modes of docking, the common interaction pattern with the amino acid residues Arg299 (cation-π), Glu345 (Aromatic hydrogen bond), hinge region Leu347, salt bridges Asp393 and Asp407 was observed, among the congeneric compounds. The interaction pattern was compared with the co-crystal inhibitor FRAX597 of the PAK1 crystal structure (PDB id: 4EQC). The correlation with different docking parameters in the SP and XP modes was insignificant and thereby revealed that the SP and XP's scoring functions could not predict the active compounds. This was due to the limitations in the docking methodology that neglected the receptor flexibility and desolvation parameters. Hence, to recognise the desolvation and explicit solvent effects, as well as to study the Structure-Activity Relationships (SARs) extensively, WaterMap (WM) calculations were performed on the congeneric compounds. Based on displaceable unfavourable hydration sites (HS) and their associated thermodynamic properties, the WM calculations facilitated in understanding the significance of correlation in the folds of activity of highly active (19 and 17), moderately active (16 and 21) and less active (26 and 25) compounds. Furthermore, the scoring function from WaterMap, namely WM/MM, led to a significant R2 value of 0.72 due to a coupled conjunction with MM treatment and displaced unfavourable waters at the binding site. To check the "optimal binding conformation", molecular dynamics simulation was carried out with the highly active compound 19 to explain the binding mode, stability, interactions, solvent-accessible area, etc., which could support the predicted conformation with bioactive conformation. CONCLUSION: This study determined the best scoring function, established SARs and predicted active molecules through a computational model. This will contribute to the development of the most potent PAK1 inhibitors.

Methods of preparation of microparticles for radioactive particle tracking experiments.

Radioactive particle tracking (RPT) technique is a relatively newer technique for the characterization of flow of process materials (liquids, solids) in laboratory- and pilot-scale industrial systems. The technique uses a single particle labelled with a suitable radioisotope having similar physical properties to that of the bulk of the process material. The preparation of a representative radioactive microparticle is a challenging task in the implementation of the technique. There are no standard methods available for the preparation of radioactive microparticles. This paper discusses some of the methods of preparation of radioactive microparticles for RPT studies. A few examples of RPT applications using the prepared microparticles are also discussed.

WaterMap and Molecular Dynamic Simulation-Guided Discovery of Potential PAK1 Inhibitors Using Repurposing Approaches.

p21-Activated kinase 1 (PAK1) is positioned at the nexus of several oncogenic signaling pathways. Currently, there are no approved inhibitors for disabling the transfer of phosphate in the active site directly, as they are limited by lower affinity, and poor kinase selectivity. In this work, a repurposing study utilizing FDA-approved drugs from the DrugBank database was pursued with an initial selection of 27 molecules out of ∼2162 drug molecules, based on their docking energies and molecular interaction patterns. From the molecules that were considered for WaterMap analysis, seven molecules, namely, Mitoxantrone, Labetalol, Acalabrutinib, Sacubitril, Flubendazole, Trazodone, and Niraparib, ascertained the ability to overlap with high-energy hydration sites. Considering many other displaced unfavorable water molecules, only Acalabrutinib, Flubendazole, and Trazodone molecules highlighted their prominence in terms of binding affinity gains through ΔΔG that ranges between 6.44 and 2.59 kcal/mol. Even if Mitoxantrone exhibited the highest docking score and greater interaction strength, it did not comply with the WaterMap and molecular dynamics simulation results. Moreover, detailed MD simulation trajectory analyses suggested that the drug molecules Flubendazole, Niraparib, and Acalabrutinib were highly stable, observed from their RMSD values and consistent interaction pattern with Glu315, Glu345, Leu347, and Asp407 including the hydrophobic interactions maintained in the three replicates. However, the drug molecule Trazodone displayed a loss of crucial interaction with Leu347, which was essential to inhibit the kinase activity of PAK1. The molecular orbital and electrostatic potential analyses elucidated the reactivity and strong complementarity potentials of the drug molecules in the binding pocket of PAK1. Therefore, the CADD-based reposition efforts, reported in this work, helped in the successful identification of new PAK1 inhibitors that requires further investigation by in vitro analysis.

Structural insights on binding mechanism of CAD complexes (CPSase, ATCase and DHOase).

Pyrimidine biosynthetic pathway enzymes constitute an important target for the development of antitumor drugs. To understand the role of binding mechanisms underlying the inborn errors of pyrimidine biosynthetic pathway, structure and function of enzymes have been analyzed. Pyrimidine biosynthetic pathway is initiated by CAD enzymes that harbor the first three enzymatic activities facilitated by Carbamoyl Phosphate Synthetase (CPSase), Aspartate Transcarbamoylase (ATCase) and Dihydroorotase (DHOase). While being an attractive therapeutic target, the lack of data driven us to study the CPSase (CarA and CarB) and its mode of binding to ATCase and DHOase which are the major limitation for its structural optimization. Understanding the binding mode of CPSase, ATCase and DHOase could help to identify the potential interface hotspot residues that favor the mechanism behind it. The mechanistic insight into the CAD complexes were achieved through Molecular modeling, Protein-Protein docking, Alanine scanning and Molecular dynamics (MD) Studies. The hotspot residues present in the CarB region of carboxy phosphate and carbamoyl phosphate synthetic domains are responsible for the assembly of CAD (CPSase-ATCase-DHOase) complexes. Overall analysis suggests that the identified hotspot residues were confirmed by alanine scanning and important for the regulation of pyrimidine biosynthesis. MD simulations analysis provided the prolonged stability of the interacting complexes. The present study reveals the novel hotspot residues such as Glu134, Glu147, Glu154, Asp266, Lys269, Glu274, Asp333, Trp459, Asp526, Asp528, Glu533, Glu544, Glu546, Glu800, Val855, Asp877, Tyr884 and Gln919 which could be targeted for structure-based inhibitor design to potentiate the CAD mediated regulation of aggressive tumors.Communicated by Ramaswamy H. Sarma.

Computational screening of potential inhibitors targeting MurF of Brugia malayi Wolbachia through multi-scale molecular docking, molecular dynamics and MM-GBSA analysis.

Lymphatic filariasis is a parasitic disease caused by the worms Wuchereria bancrofti, Brugia malayi and Brugia timori. Three anti-filarial drugs namely Diethylcarbamazine, Ivermectin and Albendazole and their combinations are used as the control strategies for filariasis. The disease has received much attention in drug discovery due to the unavailability of vaccines and the toxic pharmaceutical properties of the existing drugs. In Wolbachia endosymbiont Brugia malayi, the UDP-N-acetylmuramoyl-tripeptide-d-alanyl-d-alanine ligase (MurF) plays a key role in peptidoglycan biosynthesis pathway and therefore can be considered as effective drug target against filariasis disease. Therefore, in the present study, MurF was selected as the therapeutic target to identify specific inhibitors against filariasis. Homology modeling was performed to predict the three-dimensional structure of MurF due to the absence of the experimental structure. Further molecular dynamics simulation and structure-based high throughput virtual screening with three different chemical databases (Zinc, Maybridge and Specs) were carried out to identify potent inhibitors and also to check their conformations inside the binding site of MurF, respectively. Top three compounds with high docking score and high relative binding affinity against MurF were selected. Further, validation studies, including predicted ADME (Absorption, Distribution, Metabolism, Excretion) assessment, binding free energy using MM-GBSA (Molecular Mechanics Generalized Born Surface Area) and DFT (Density Functional Theory) calculations were performed for the top three compounds. From the results, it was observed that all the three compounds were predicted to show high reactivity, acceptable range of pharmacokinetic properties and high binding affinity with the drug target MurF. Overall, the results could provide more understanding on the inhibition of MurF enzyme and the screened compounds could lead to the development of new specific anti-filarial drugs.

Small peptide inhibitor from the sequence of RUNX3 disrupts PAK1-RUNX3 interaction and abrogates its phosphorylation-dependent oncogenic function.

P21 Activated Kinase 1 (PAK1) is an oncogenic serine/threonine kinase known to play a significant role in the regulation of cytoskeleton and cell morphology. Runt-related transcription factor 3 (RUNX3) was initially known for its tumor suppressor function, but recent studies have reported the oncogenic role of RUNX3 in various cancers. Previous findings from our laboratory provided evidence that Threonine 209 phosphorylation of RUNX3 acts as a molecular switch in dictating the tissue-specific dualistic functions of RUNX3 for the first time. Based on these proofs and to explore the translational significance of these findings, we designed a small peptide (RMR) from the protein sequence of RUNX3 flanking the Threonine 209 phosphorylation site. The selection of this specific peptide from multiple possible peptides was based on their binding energies, hydrogen bonding, docking efficiency with the active site of PAK1 and their ability to displace PAK1-RUNX3 interaction in our prediction models. We found that this peptide is stable both in in vitro and in vivo conditions, not toxic to normal cells and inhibits the Threonine 209 phosphorylation in RUNX3 by PAK1. We also tested the efficacy of this peptide to block the RUNX3 Threonine 209 phosphorylation mediated tumorigenic functions in in vitro cell culture models, patient-derived explant (PDE) models and in in vivo tumor xenograft models. These results proved that this peptide has the potential to be developed as an efficient therapeutic molecule for targeting RUNX3 Threonine 209 phosphorylation-dependent tumor phenotypes.

Identification of Pak1 inhibitors using water thermodynamic analysis.

p21-activated kinases (Paks) play an integral component in various cellular diverse processes. The full activation of Pak is dependent upon several serine residues present in the N-terminal region, a threonine present at the activation loop, and finally the phosphorylation of these residues ensure the complete activation of Pak1. The present study deals with the identification of novel potent candidates of Pak1 using computational methods as anti-cancer compounds. A diverse energy based pharmacophore (e-pharmacophore) was developed using four co-crystal inhibitors of Pak1 having pharmacophore features of 5 (DRDRR), 6 (DRHADR), and 7 (RRARDRP and DRRDADH) hypotheses. These models were used for rigorous screening against e-molecule database. The obtained hits were filtered using ADME/T and molecular docking to identify the high affinity binders. These hits were subjected to hierarchical clustering using dendritic fingerprint inorder to identify structurally diverse molecules. The diverse hits were scored against generated water maps to obtain WM/MM ΔG binding energy. Furthermore, molecular dynamics simulation and density functional theory calculations were performed on the final hits to understand the stability of the complexes. Five structurally diverse novel Pak1 inhibitors (4835785, 32198676, 32407813, 76038049, and 32945545) were obtained from virtual screening, water thermodynamics and WM/MM ΔG binding energy. All hits revealed similar mode of binding pattern with the hinge region residues replacing the unstable water molecules in the binding site. The obtained novel hits could be used as a platform to design potent drugs that could be experimentally tested against cancer patients having increased Pak1 expression.

Exploration of N5-CAIR Mutase Novel Inhibitors from Pyrococcus horikoshii OT3: A Computational Study.

In bacterial and archaeal purine biosynthetic pathways, sixth step involves utilization of enzyme PurE, catalyzing the translation of aminoimidazole ribonucleotide to 4-carboxy-5-aminoimidazole ribonucleotide (CAIR) with carbon dioxide. The formation of CAIR takes place through an unstable intermediate N5-CAIR, played by two enzymes-N5-CAIR synthetase (PurK) and N5-CAIR mutase (PurE) that further catalyzes the reaction of N5-CAIR to CAIR. In this study, N5-CAIR mutase (PH0320) from Pyrococcus horikoshii OT3 (PurE) was considered. The three-dimensional structure of Pyrococcus horikoshii OT3 was modeled based on the structure of PurE from Escherichia coli. The modeled structure was subjected to molecular dynamics simulation up to 100 ns, and least energy structure from the simulation was subjected to virtual screening and induced fit docking to identify the best potent leads. A total of five best antagonists were identified based on their affinity and mode of binding leading with conserved residues Ser18, Ser20, Asp21, Ser45, Ala46, His47, Arg48, Ala72, Gly73, Ala75, and His77 promotes the activity of Ph-N5-CAIR mutase. In addition to molecular dynamics, absorption, digestion, metabolism, and excretion properties, binding free energy and density functional theory calculations of compounds were carried out. Based on analyses, compound from National Cancer Institute (NCI) database, NCI_826 was adjudged as the best potent lead molecule and could be suggested as the suitable inhibitor of N5-CAIR mutase.

Application of thin layer activation technique for monitoring corrosion of carbon steel in hydrocarbon processing environment.

Acidic crude oil transportation and processing in petroleum refining and petrochemical operations cause corrosion in the pipelines and associated components. Corrosion monitoring is invariably required to test and prove operational reliability. Thin Layer Activation (TLA) technique is a nuclear technique used for measurement of corrosion and erosion of materials. The technique involves irradiation of material with high energy ion beam from an accelerator and measurement of loss of radioactivity after the material is subjected to corrosive environment. In the present study, TLA technique has been used to monitor corrosion of carbon steel (CS) in crude oil environment at high temperature. Different CS coupons were irradiated with a 13 MeV proton beam to produce Cobalt-56 radioisotope on the surface of the coupons. The corrosion studies were carried out by subjecting the irradiated coupons to a corrosive environment, i.e, uninhibited straight run gas oil (SRGO) containing known amount of naphthenic acid (NA) at high temperature. The effects of different parameters, such as, concentration of NA, temperature and fluid velocity (rpm) on corrosion behaviour of CS were studied.

Investigation of vital pathogenic target orotate phosphoribosyltransferases (OPRTase) from Thermus thermophilus HB8: Phylogenetic and molecular modeling approach.

Biosynthesis pathways of pyrimidine and purine are shown to play an important role in regular cellular activities. The biosynthesis can occur either through de novo or salvage pathways based on the requirement of the cell. The pyrimidine biosynthesis pathway has been linked to several disorders and various autoimmune diseases. Orotate phosphoribosyl transferase (OPRTase) is an important enzyme which catalyzes the conversion of orotate to orotate monophosphate in the fifth step of pyrimidine biosynthesis. Phylogenetic analysis of 228 OPRTase sequences shows the distribution of proteins across different living forms of life. High structural similarities between Thermusthermophilus and other organisms kindled us to concentrate on OPRTase as an anti-pathogenic target. In this study, a homology model of OPRTase was constructed using 2P1Z as a template. About 100 ns molecular dynamics simulation was performed to investigate the conformational stability and dynamic patterns of the protein. The amino acid residues (Met1, Asp2, Glu43, Ala44, Glu47, Lys51, Ala157 and Leu158) lining in the binding site were predicted using SiteMap. Further, structure based virtual screening was performed on the predicted binding site using ChemBridge, Asinex, Binding, NCI, TosLab and Zinc databases. Compounds retrieved from the screening collections were manually clustered. The resultant protein-ligand complexes were subjected to molecular dynamics simulations, which further validates the binding modes of the hits. The study may provide better insight for designing potent anti-pathogenic agent.

Identification of potential inhibitors for AIRS from de novo purine biosynthesis pathway through molecular modeling studies - a computational approach.

In cancer, de novo pathway plays an important role in cell proliferation by supplying huge demand of purine nucleotides. Aminoimidazole ribonucleotide synthetase (AIRS) catalyzes the fifth step of de novo purine biosynthesis facilitating in the conversion of formylglycinamidine ribonucleotide to aminoimidazole ribonucleotide. Hence, inhibiting AIRS is crucial due to its involvement in the regulation of uncontrollable cancer cell proliferation. In this study, the three-dimensional structure of AIRS from P. horikoshii OT3 was constructed based on the crystal structure from E. coli and the modeled protein is verified for stability using molecular dynamics for a time frame of 100 ns. Virtual screening and induced fit docking were performed to identify the best antagonists based on their binding mode and affinity. Through mutational studies, the residues necessary for catalytic activity of AIRS were identified and among which the following residues Lys35, Asp103, Glu137, and Thr138 are important in determination of AIRS function. The mutational studies help to understand the structural and energetic characteristics of the specified residues. In addition to Molecular Dynamics, ADME properties, binding free-energy, and density functional theory calculations of the compounds were carried out to find the best lead molecule. Based on these analyses, the compound from the NCI database, NCI_121957 was adjudged as the best molecule and could be suggested as the suitable inhibitor of AIRS. In future studies, experimental validation of these ligands as AIRS inhibitors will be carried out.

Radiotracer investigation in a glass production unit.

A radiotracer investigation was carried out in a glass production unit in a glass industry. Lanthanum-140 as lanthanium oxide mixed with silica was used as a radiotracer to trace the molten glass in various sections of the unit. Residence time distributions of molten glass were measured and analyzed to identify the flow abnormities. The flow parameters such as breakthrough time, mean residence time, homogenization time, dead volume and flow patterns in different sections of the unit were obtained from the measured RTD data. The results of the investigation were used to improve and optimize the operation of the glass production unit.