Human aortic endothelial cells respond to shear flow in well-plate microfluidic devices.

Although chronic progressive cardiovascular diseases such as atherosclerosis are often challenging to fully model in vitro, it has been shown that certain in vitro methods can effectively evaluate some aspects of disease progression. This has been demonstrated in in vitro and in vivo studies of endothelial cells that have illustrated the effects of nitric oxide (NO) production, filamentous actin (F-actin) formation, and cell and actin angle alignment on vascular function and homeostasis. Systems utilising shear flow have been established, in order to create a physiologically relevant environment for cells that require shear flow for homeostasis. Here, we investigated the use of a well-plate microfluidic system and associated devices (0-20dyn/cm²) to demonstrate applied shear effects on primary Human Aortic Endothelial Cells (HAECs). Changes in cell and actin alignment in the direction of flow, real-time production of NO and gross cell membrane shape changes in response to physiological shear flow were observed. These commercial systems have a range of potential applications, including within the consumer and pharmaceutical industries, thereby reducing the dependency on animal testing for regulatory safety assessments.

Assessment of in vitro COPD models for tobacco regulatory science: Workshop proceedings, conclusions and paths forward for in vitro model use.

The Family Smoking Prevention and Tobacco Control Act of 2009 established the Food and Drug Administration Center for Tobacco Products (FDA-CTP), and gave it regulatory authority over the marketing, manufacture and distribution of tobacco products, including those termed 'modified risk'. On 8-10 December 2014, IIVS organised a workshop conference, entitled Assessment of In Vitro COPD Models for Tobacco Regulatory Science, to bring together stakeholders representing regulatory agencies, academia, industry and animal protection, to address the research priorities articulated by the FDA-CTP. Specific topics were covered to assess the status of current in vitro technologies as they are applied to understanding the adverse pulmonary events resulting from tobacco product exposure, and in particular, the progression of chronic obstructive pulmonary disease (COPD). The four topics covered were: a) Inflammation and Oxidative Stress; b) Ciliary Dysfunction and Ion Transport; c) Goblet Cell Hyperplasia and Mucus Production; and d) Parenchymal/Bronchial Tissue Destruction and Remodelling. The 2.5 day workshop included 18 expert speakers, plus poster sessions, networking and breakout sessions, which identified key findings and provided recommendations to advance the in vitro technologies and assays used to evaluate tobacco-induced disease etiologies. The workshop summary was reported at the 2015 Society of Toxicology Annual Meeting, and the recommendations led to an IIVS-organised technical workshop in June 2015, entitled Goblet Cell Hyperplasia, Mucus Production, and Ciliary Beating Assays, to assess these assays and to conduct a proof-of-principle multi-laboratory exercise to determine their suitability for standardisation. Here, we report on the proceedings, recommendations and outcomes of the December 2014 workshop, including paths forward to continue the development of non-animal methods to evaluate tissue responses that model the disease processes that may lead to COPD, a major cause of mortality worldwide.

Evaluation of cytotoxicity of different tobacco product preparations.

Acute exposure to cigarette smoke or its components triggers diverse cellular effects, including cytotoxicity. However, available data regarding the potential cytotoxic effects of smokeless tobacco (ST) extracts lack consensus. Here, we investigated the relative biological effects of 2S3 reference ST, and whether ST elicits differential cellular/molecular responses compared to combustible tobacco product preparations (TPPs) prepared from 3R4F cigarettes. Total particulate matter (TPM) and whole smoke conditioned medium (WS-CM) were employed as combustible TPPs, while the ST extract was used as non-combustible TPP. HL60, THP1 cells and human PBMCs were used to examine the effects of TPPs in short-term cell culture. Corresponding EC(50) values, normalized for nicotine content of the TPPs, suggest that combustible TPPs induced higher cytotoxicity as follows: WS-CM TPM ≥ ≫ST extract>nicotine. While all three TPPs induced detectable levels of DNA damage and IL8 secretion, the combustible TPPs were significantly more potent than the ST preparation. The major PBMC subsets showed differential cytotoxicity to combustible TPPs as follows: CD4>CD8>monocytes>NK cells. These findings suggest that, relative cytotoxic and other cell biological effects of TPPs are dose-dependent, and that ST extract is the least cytotoxic TPP tested in this study.

Genotoxicity evaluation of tobacco and nicotine delivery products: Part Two. In vitro micronucleus assay.

In this study, a variety of test matrices from tobacco and nicotine delivery products were assessed against a 3R4F Kentucky reference cigarette using the in vitro micronucleus assay. Testing was conducted using two Chinese hamster cell lines (CHO and V79), and a human lymphoblastoid cell line (TK6), in accordance with established guidelines. Total particulate matter (TPM) from a 3R4F Reference cigarette was compared to an electronic cigarette e-liquid, electronic cigarette TPM and TPM from a commercial tobacco heating product using a standard and an extended treatment condition with recovery period. Cells were assessed with 3R4F TPM prior to assessment of the other tobacco and nicotine product test matrices. These cell lines gave varied responses to 3R4F TPM with the most robust response using V79 cells. The use of an extended exposure/recovery period was seen to increase assay sensitivity for CHO and V79 cell lines but was less clear for TK6 cells. Negative responses were observed for all products except 3R4F across all treatment conditions in V79 cells. The most potent response to cigarette smoke was following extended treatment with recovery, suggesting this may be a more appropriate treatment for the future assessment of tobacco and nicotine product test matrices.

Genotoxicity evaluation of tobacco and nicotine delivery products: Part One. Mouse lymphoma assay.

Conduct of the mouse lymphoma assay (MLA) is underpinned by Organisation for Economic Co-operation and Development (OECD) Test Guideline 490 and International Conference on Harmonisation S2(R1) guidance and is a recognised in vitro genotoxicity test battery assay. It has been used on a limited number of occasions for the assessment of some tobacco and nicotine products, such as e-cigarettes and tobacco heating products (THP). The aim of this study was to assess the suitability of the MLA for genotoxicity testing with a variety of tobacco and nicotine products. Total particulate matter (TPM) from a 3R4F cigarette was compared against a commercial electronic cigarette liquid (e-liquid), electronic cigarette (e-cigarette) aerosol matter captured from the same e-liquid, and TPM from a commercial THP. Treatment conditions included 3 h exposures with and without metabolic activation and a longer 24 h exposure without metabolic activation (-S9) at concentrations up to 500 µg/mL. Under all treatment conditions, 3R4F produced a clear positive response with regard to induction of mutation. In contrast, no marked induction of mutation was observed for the e-liquid, e-cigarette aerosol or THP. Additionally, data are presented as a function of nicotine equivalents for comparisons between these different tobacco products and test matrices.

Development of a quantitative method for assessment of dose in in vitro evaluations using a VITROCELL® VC10® smoke exposure system.

The assessment of potential cytotoxicity or genotoxicity of combustible tobacco products has historically been performed using partitioned exposures (i.e. total particulate matter [TPM], gas vapor phase [GVP]) rather than whole smoke. The VITROCELL® VC10® smoke exposure system offers multiple platforms for air liquid interface (ALI) or air agar interface (AAI) exposure to mimic in vivo-like conditions for assessing the toxicological impact of whole smoke using in vitro assays (e.g. cytotoxicity, mutagenicity and DNA modifications). The aims of this study were to investigate dosimetry during whole smoke exposure in the VITROCELL® VC10® smoking robot using quartz crystal microbalances (QCMs) and to support the use of photometers for concurrent assessment of 'dose' during whole smoke exposures. QCM results showed consistent deposition across different exposure chambers, between dilution bars, experiments and modules. Higher levels of variation were noted at higher airflows (i.e., >8 L/min). Dosimetry assessed using photometers also showed a high level of consistency between experiments, with no notable impact on deposition on the QCM when the photometers were placed 'in-line' between the dilution bar and the exposure module. However, the use of photometers alone may be not be sufficient to estimate deposition; the predictability of the data-generated equation was poor. Further development of dosimetry methodology and information for use in validated in vitro biological test methods is needed to facilitate on-going aerosol-based research and relative assessment.

The time course of expression of genes involved in specific pathways in normal human bronchial epithelial cells following exposure to cigarette smoke.

This study was conducted to determine the time course of gene expression associated with specific signaling pathways in normal human bronchial epithelial (NHBE) cells after exposure to 2 concentrations of 2R4F tobacco mainstream smoke (MSS). Expression of 84 genes representing 18 signal transduction pathways was quantitated in MSS- and air-exposed cultures using real-time polymerase chain reaction (PCR) arrays at 1, 4, and 24 hours following exposure. A confidence score, calculated based on statistical analysis of the degree and reproducibility of expression changes, was used to identify potential biologically significant changes in gene expression. Stimulation of NIAP, an apoptosis inhibitor, suppression of NFKB1 and MYC, representing pro-apoptotic activity, and down-regulation of TCF7 and up-regulation of KLK2, representing anti-/pro-inflammatory responses, were altered 1 hour after exposure to the high concentration of MSS. At the 4-hour time point, the pattern had changed such that 10 different genes were now up-regulated and an additional gene was now down-regulated. Significant changes included genes involved in inflammatory response (LTA, SELPLG, and IL8), repair and wound-healing activity (MMP10), and growth activity (GREB1, EGR1), suggesting repair in this period. By 24 hours, the only up-regulated genes in common with the 4-hour profile were SELPLG and IL8, suggesting continued inflammatory signaling. These results suggest that identification of specific gene expression-based biomarkers of MSS toxicity is promising for investigating specific mechanisms of cellular damage. As expected, the expressed signals were dependent on the concentration of MSS and the postexposure times.

Development, qualification, validation and application of the Ames test using a VITROCELL® VC10® smoke exposure system.

The Ames test has established use in the assessment of potential mutagenicity of tobacco products but has generally been performed using partitioned exposures (e.g. total particulate matter [TPM], gas vapor phase [GVP]) rather than whole smoke (WS). The VITROCELL®VC10® smoke exposure system offers multiple platforms for air liquid interface (ALI), or air agar interface (AAI) in the case of the Ames test exposure to mimic in vivo-like conditions for assessing the toxicological impact of fresh WS in in vitro assays. The goals of this study were to 1) qualify the VITROCELL®VC10® to demonstrate functionality of the system, 2) develop and validate the Ames test following WS exposure with the VITROCELL®VC10® and 3) assess the ability of the Ames test to differentiate between a reference combustible product (3R4F Kentucky reference cigarette) and a primarily tobacco heating product (Eclipse). Based on critical function assessments, the VITROCELL®VC10® was demonstrated to be fit for the purpose of consistent generation of WS. Assay validation was conducted for 5 bacterial strains (TA97, TA98, TA100, TA1535 and TA102) and reproducible exposure-related changes in revertants were observed for TA98 and TA100 in the presence of rat liver S-9 following exposure to 3R4F WS. In the comparative studies, exposure-related changes in in vitro mutagenicity following exposure of TA98 and TA100 in the presence of S9 to both 3R4F and Eclipse WS were observed, with the response for Eclipse being significantly less than that for 3R4F (p < 0.001) which is consistent with the fewer chemical constituents liberated by primarily-heating the product.

Toxicological evaluation of cigarettes with two banded cigarette paper technologies.

A tiered testing strategy has been employed to evaluate the potential of tobacco processes, ingredients, or technological developments to change the biological activity resulting from burning cigarette tobacco. The strategy is based on comparative chemical and biological testing. The introduction of banded cigarette papers in cigarettes to meet New York state "Fire Safety Standards for Cigarettes" constitutes an example of a technological development evaluated utilizing this tiered testing strategy that included a comparison of the chemical and biological effects of cigarettes with and without the banded cigarette paper technologies (BCPT) (representative of current marketed technologies). Specific testing included mainstream cigarette smoke chemistry studies; in vitro studies included genotoxicity (Ames and sister chromatid exchange) and cytotoxicity studies (neutral red); in vivo studies included a 13-week inhalation study in Sprague-Dawley rats and a 30-week dermal tumor promotion study in SENCAR mice. Collectively, data indicated that cigarettes with and without BCPT had a similar toxicological profile in this test battery.

Development, qualification, validation and application of the neutral red uptake assay in Chinese Hamster Ovary (CHO) cells using a VITROCELL® VC10® smoke exposure system.

Cytotoxicity assessment of combustible tobacco products by neutral red uptake (NRU) has historically used total particulate matter (TPM) or solvent captured gas vapor phase (GVP), rather than fresh whole smoke. Here, the development, validation and application of the NRU assay in Chinese Hamster Ovary (CHO) cells, following exposure to fresh whole smoke generated with the VITROCELL® VC10® system is described. Whole smoke exposure is particularly important as both particulate and vapor phases of tobacco smoke show cytotoxicity in vitro. The VITROCELL® VC10® system provides exposure at the air liquid interface (ALI) to mimic in vivo conditions for assessing the toxicological impact of smoke in vitro. Instrument and assay validations are crucial for comparative analyses. GOALS OF THIS STUDY: 1) demonstrate functionality of the VITROCELL® VC10® system by installation, operational and performance qualification, 2) develop and validate a cellular system for assessing cytotoxicity following whole smoke exposure and 3) assess the whole smoke NRU assay sensitivity for statistical differentiation between a reference combustible cigarette (3R4F) and a primarily "heat-not-burn" cigarette (Eclipse). RESULTS: The VITROCELL® VC10® provided consistent generation and delivery of whole smoke; exposure-related changes in in vitro cytotoxicity were observed with reproducible IC50 values; comparative analysis showed that the heat-not-burn cigarette was significantly (P<0.001) less cytotoxic than the 3R4F combustible cigarette, consistent with the lower levels of chemical constituents liberated by primarily-heating the cigarette versus burning.