RESUMEN
Crystalline films of the Cu3(BTC)2 (BTC3- = 1,3,5-benzenetricarboxylate) metal-organic framework (MOF) have been grown by dip-coating an alumina/Si(111) substrate in solutions of Cu(II) acetate and the organic linker H3BTC. Atomic force microscopy (AFM) experiments demonstrate that the substrate is completely covered by the MOF film, while grazing incidence wide-angle X-ray scattering (GIWAXS) establishes the crystallinity of the films. Forty cycles of dip-coating results in a film that is â¼70 nm thick with a root mean squared roughness of 25 nm and crystallites ranging from 50-160 nm in height. Co2+ ions were exchanged into the MOF framework by immersing the Cu3(BTC)2 films in solutions of CoCl2. By varying the temperature and exchange times, different concentrations of Co were incorporated into the films, as determined by X-ray photoelectron spectroscopy experiments. AFM studies showed that morphologies of the bimetallic films were largely unchanged after transmetalation, and GIWAXS indicated that the bimetallic films retained their crystallinity.
RESUMEN
For most applications, zirconia (ZrO2) is doped with yttria. Doping leads to the stabilization of the tetragonal or cubic phase and increased oxygen ion conductivity. Most previous surface studies of yttria-doped zirconia were plagued by impurities, however. We have studied doping of pure, 5-monolayer ZrO2 films on Rh(111) by x-ray photoelectron spectroscopy (XPS), scanning tunneling microscopy (STM), and low-energy electron diffraction (LEED). STM and LEED show that the tetragonal phase is stabilized by unexpectedly low dopant concentrations, 0.5 mol % Y2O3, even when the films are essentially fully oxidized (as evidenced by XPS core level shifts). XPS also shows Y segregation to the surface with an estimated segregation enthalpy of -23 ± 4 kJ/mol.
RESUMEN
The effect of donor (D)-acceptor (A) alignment on the materials electronic structure was probed for the first time using novel purely organic porous crystalline materials with covalently bound two- and three-dimensional acceptors. The first studies towards estimation of charge transfer rates as a function of acceptor stacking are in line with the experimentally observed drastic, eight-fold conductivity enhancement. The first evaluation of redox behavior of buckyball- or tetracyanoquinodimethane-integrated crystalline was conducted. In parallel with tailoring the D-A alignment responsible for "static" changes in materials properties, an external stimulus was applied for "dynamic" control of the electronic profiles. Overall, the presented D-A strategic design, with stimuli-controlled electronic behavior, redox activity, and modularity could be used as a blueprint for the development of electroactive and conductive multidimensional and multifunctional crystalline porous materials.
RESUMEN
The activity of Pt-Re surfaces was studied for the water-gas shift (WGS) reaction in order to understand how Pt-Re interactions and cluster-support interactions influence activity. The results from these studies were also compared with previous reports of WGS activity on Pt-Re clusters grown on TiO2. Platinum on Re surfaces were prepared by annealing Re films on Pt(111) to form Pt-Re surface alloys, depositing Pt on Re/Pt(111), and depositing Pt on Re clusters supported on highly oriented pyrolytic graphite (HOPG) surfaces. In all cases, the turnover frequency (TOF) for the WGS reaction was higher for Pt with subsurface Re compared to pure Pt. Furthermore, the TOF for 2 ML Pt/TiO2 clusters was greater than that of Pt(111) and 2 ML Pt/HOPG clusters, indicating that the TiO2 support enhances activity for the WGS reaction on Pt. For Pt/TiO2 clusters, a plot of the fraction of perimeter/surface sites as a function of Pt coverage closely follows TOF vs Pt coverage, strongly suggesting that activity occurs at the Pt-TiO2 interface. Notably, the fraction of undercoordinated sites as a function of Pt coverage does not follow the same behavior as the TOFs.
RESUMEN
We report the first study of a gas-phase reaction catalyzed by highly dispersed sites at the metal nodes of a crystalline metal-organic framework (MOF). Specifically, CuRhBTC (BTC3- =benzenetricarboxylate) exhibited hydrogenation activity, while other isostructural monometallic and bimetallic MOFs did not. Our multi-technique characterization identifies the oxidation state of Rh in CuRhBTC as +2, which is a Rh oxidation state that has not previously been observed for crystalline MOF metal nodes. These Rh2+ sites are active for the catalytic hydrogenation of propylene to propane at room temperature, and the MOF structure stabilizes the Rh2+ oxidation state under reaction conditions. Density functional theory calculations suggest a mechanism in which hydrogen dissociation and propylene adsorption occur at the Rh2+ sites. The ability to tailor the geometry and ensemble size of the metal nodes in MOFs allows for unprecedented control of the active sites and could lead to significant advances in rational catalyst design.
RESUMEN
We report the first examples of purely organic donor-acceptor materials with integrated π-bowls (πBs) that combine not only crystallinity and high surface areas but also exhibit tunable electronic properties, resulting in a four-orders-of-magnitude conductivity enhancement in comparison with the parent framework. In addition to the first report of alkyne-azide cycloaddition utilized for corannulene immobilization in the solid state, we also probed the charge transfer rate within the Marcus theory as a function of mutual πB orientation for the first time, as well as shed light on the density of states near the Fermi edge. These studies could foreshadow new avenues for πB utilization for the development of optoelectronic devices or a route for highly efficient porous electrodes.
RESUMEN
The development of porous well-defined hybrid materials (e.g., metal-organic frameworks or MOFs) will add a new dimension to a wide number of applications ranging from supercapacitors and electrodes to "smart" membranes and thermoelectrics. From this perspective, the understanding and tailoring of the electronic properties of MOFs are key fundamental challenges that could unlock the full potential of these materials. In this work, we focused on the fundamental insights responsible for the electronic properties of three distinct classes of bimetallic systems, Mx-yM'y-MOFs, MxM'y-MOFs, and Mx(ligand-M'y)-MOFs, in which the second metal (M') incorporation occurs through (i) metal (M) replacement in the framework nodes (type I), (ii) metal node extension (type II), and (iii) metal coordination to the organic ligand (type III), respectively. We employed microwave conductivity, X-ray photoelectron spectroscopy, diffuse reflectance spectroscopy, powder X-ray diffraction, inductively coupled plasma atomic emission spectroscopy, pressed-pellet conductivity, and theoretical modeling to shed light on the key factors responsible for the tunability of MOF electronic structures. Experimental prescreening of MOFs was performed based on changes in the density of electronic states near the Fermi edge, which was used as a starting point for further selection of suitable MOFs. As a result, we demonstrated that the tailoring of MOF electronic properties could be performed as a function of metal node engineering, framework topology, and/or the presence of unsaturated metal sites while preserving framework porosity and structural integrity. These studies unveil the possible pathways for transforming the electronic properties of MOFs from insulating to semiconducting, as well as provide a blueprint for the development of hybrid porous materials with desirable electronic structures.
RESUMEN
OBJECTIVE: We estimate the short-term associations between daily changes in ambient air pollutants and daily asthma-related emergency department (ED) visits in Indianapolis, IN. METHODS: We identified asthma-related ED visits among Indianapolis residents aged ≥5 years. We used Poisson regression in a time-series framework to estimate the increased risk for asthma-related ED visits from exposure to ambient SO2, PM2.5 and ozone during the warm season (April-September) and SO2 and PM2.5 during the cold (October-March) season, from 2007 to 2011. Our models controlled for measured confounders, including weather and respiratory infections, as well as unmeasured confounders using a natural cubic spline to account for long-term seasonal trends. RESULTS: During 2007-2011 in Indianapolis, 165,056 asthma-related ED visits occurred. We found statistically significant positive associations (p < 0.05) between ambient air pollutants and ED visits during the warm season for persons aged 5-44 years. Interquartile range increases in daily ozone concentrations with same day, 2-day lagged, and 3-day moving average were associated with increased risks for ED visits of 3.2% (95% CI: 0.2%, 6.3%), 4.4% (0.1%, 8.9%) and 4.8% (0.2%, 9.6%), respectively. Interquartile range increases in 3-day moving averages for SO2 were associated with an increased risk of 3.3% (95% CI: 0.2%, 6.5%). We identified statistically significant associations (p < 0.05) between increased SO2 and PM2.5 levels and decreased ED visits among some age groups, primarily during the cold season, and no significant positive associations between changes in PM2.5 concentration and asthma-related ED visits. CONCLUSIONS: During the warm season, increases in ozone and SO2 concentrations were associated with increased asthma morbidity in children and young adults in Indianapolis. These results will enable reliable estimation of the health impacts of increases in these pollutants on asthma-related ED visits in Indianapolis and similar communities.
Asunto(s)
Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Asma/epidemiología , Servicio de Urgencia en Hospital/estadística & datos numéricos , Exposición a Riesgos Ambientales/análisis , Estaciones del Año , Adolescente , Adulto , Anciano , Niño , Femenino , Humanos , Indiana , Masculino , Persona de Mediana Edad , Ozono/análisis , Material Particulado/análisis , Análisis de Regresión , Dióxido de Azufre/análisis , Tiempo (Meteorología) , Adulto JovenRESUMEN
Metal node engineering in combination with modularity, topological diversity, and porosity of metal-organic frameworks (MOFs) could advance energy and optoelectronic sectors. In this study, we focus on MOFs with multinuclear heterometallic nodes for establishing metal-property trends, i.e., connecting atomic scale changes with macroscopic material properties by utilization of inductively coupled plasma mass spectrometry, conductivity measurements, X-ray photoelectron and diffuse reflectance spectroscopies, and density functional theory calculations. The results of Bader charge analysis and studies employing the Voronoi-Dirichlet partition of crystal structures are also presented. As an example of frameworks with different nodal arrangements, we have chosen MOFs with mononuclear, binuclear, and pentanuclear nodes, primarily consisting of first-row transition metals, that are incorporated in HHTP-, BTC-, and NIP-systems, respectively (HHTP3- = triphenylene-2,3,6,7,10,11-hexaone; BTC3- = 1,3,5-benzenetricarboxylate; and NIP2- = 5-nitroisophthalate). Through probing framework electronic profiles, we demonstrate structure-property relationships, and also highlight the necessity for both comprehensive analysis of trends in metal properties, and novel avenues for preparation of heterometallic multinuclear isoreticular structures, which are critical components for on-demand tailoring of properties in heterometallic systems.