RESUMEN
Single crystal studies provide a better understanding of the basic properties of organic photovoltaic devices. Therefore, in this work, rubrene single crystals with a thickness of 250 nm to 1000 nm were used to produce an inverted bilayer organic solar cell. Subsequently, polycrystalline rubrene (orthorhombic, triclinic) and amorphous bilayer solar cells of the same thickness as single crystals were studied to make comparisons across platforms. To investigate how single crystal, polycrystalline (triclinic-orthorhombic) and amorphous forms alter the charge carrier recombination mechanism at the rubrene/PCBM interface, light intensity measurements were carried out. The light intensity dependency of the JSC, VOC and FF parameters in organic solar cells with different forms of rubrene was determined. Monomolecular (Shockley Read Hall) recombination is observed in devices employing amorphous and polycrystalline rubrene in addition to bimolecular recombination, whereas the single crystal device is weakly affected by trap assisted SRH recombination due to reduced trap states at the donor acceptor interface. To date, the proposed work is the only systematic study examining transport and interface recombination mechanisms in organic solar cells produced by different structure forms of rubrene.
RESUMEN
For organic semiconductor crystals exhibiting anisotropic charge transport along different crystallographic directions, nanoconfinement is a powerful strategy to control crystal orientation by aligning the fast crystallographic growth direction(s) with the unconfined axis(es) of nanoconfining scaffolds. Here, design rules are presented to relate crystal morphology, scaffold geometry, and orientation control in solution-processed small-molecule crystals. Specifically, organic semiconductor triisopropylsilylethynyl pyranthrene needle-like crystals with a dimensionality of n = 1 and perylene platelike crystals with n = 2 were grown from solution within nanoconfining scaffolds comprising cylindrical nanopores with a dimensionality of m = 1, representing one unconfined dimension along the cylinder axis, and those comprising nanopillar arrays with a dimensionality of m = 2. For m = n systems, native crystal growth habits were preserved while the crystal orientation in n = m direction(s) was dictated by the geometry of the scaffold. For n≠m systems, on the other hand, orientation control was restricted within a single plane, either parallel or perpendicular to the substrate surface. Intriguingly, control over crystal shape was also observed for perylene crystals grown in cylindrical nanopores (n > m). Within the nanopores, crystal growth was restricted along a single direction to form a needle-like morphology. Once growth proceeded above the scaffold surface, the crystals adopted their native growth habit to form asymmetric T-shaped single crystals with concave corners. These findings suggest that nanoporous scaffolds with spatially-varying dimensionalities can be used to grow single crystals of complex shapes.
RESUMEN
Vibronic spectra of molecules are typically described within the Franck-Condon model. Here, we show that highly resolved vibronic spectra of large organic molecules on a single layer of MoS_{2} on Au(111) show spatial variations in their intensities, which cannot be captured within this picture. We explain that vibrationally mediated perturbations of the molecular wave functions need to be included into the Franck-Condon model. Our simple model calculations reproduce the experimental spectra at arbitrary position of the scanning tunneling microscope's tip over the molecule in great detail.
RESUMEN
A series of rubrene derivatives were synthesized and the influence of the side group in enhancing photo-oxidative stability was evaluated. Photo-oxidation half-lives were determined via UV-vis absorption spectroscopy, which revealed thiophene containing derivatives to be the most stable species. The electron affinity of the compounds did not correlate with stability as previously reported in literature. Our work shows that shorter excited-state lifetimes result in increased photo-oxidative stability in these rubrene derivatives. These results confirm that faster relaxation kinetics out-compete the formation of reactive oxygen species that ultimately degrade linear oligoacenes. This report highlights the importance of using molecular design to tune excited-state lifetimes in order to generate more stable oligoacenes.
RESUMEN
We report on the graphene-assisted growth, crystallization, and phase transition of zinc phthalocyanine (ZnPc) vertically oriented single crystal nanopillars. Postcrystallization thermal annealing of the nanostructures results in a molecular packing change while maintaining the vertical orientation of the single crystals orthogonal to the underlying substrate. Grazing incidence X-ray diffraction and high-resolution TEM studies characterized this phase transition from a metastable crystal phase to the more stable ß-phase commonly observed in bulk crystals. These vertical arrays of crystalline nanopillars exhibit a high-surface-to-volume ratio, which is advantageous for applications such as gas sensors. We fabricated chemiresistor sensors with ZnPc nanopillars grown on graphene and demonstrated its selectivity for ammonia vapors, and improvement in sensitivity in the ß-phase crystal packing pillars due to their molecular orientation increasing the exposure of the Zn2+ ion to the ammonia analyte. This work highlights the first morphology-retentive phase transition in organic single crystal nanopillars through simple postprocessing thermal annealing. This study opens up the possibility of molecular packing control without large variations in morphology, a necessity for high-performance devices and establishing structure-property relations.
RESUMEN
The smooth surface of crystalline rubrene films formed through an abrupt heating process provides a valuable platform to study organic homoepitaxy. By varying growth rate and substrate temperature, we are able to manipulate the onset of a transition from layer-by-layer to island growth modes, while the crystalline thin films maintain a remarkably smooth surface (less than 2.3 nm root-mean-square roughness) even with thick (80 nm) adlayers. We also uncover evidence of point and line defect formation in these films, indicating that homoepitaxy under our conditions is not at equilibrium or strain-free. Point defects that are resolved as screw dislocations can be eliminated under closer-to-equilibrium conditions, whereas we are not able to eliminate the formation of line defects within our experimental constraints at adlayer thicknesses above â¼25 nm. We are, however, able to eliminate these line defects by growing on a bulk single crystal of rubrene, indicating that the line defects are a result of strain built into the thin film template. We utilize electron backscatter diffraction, which is a first for organics, to investigate the origin of these line defects and find that they preferentially occur parallel to the (002) plane, which is in agreement with expectations based on calculated surface energies of various rubrene crystal facets. By combining the benefits of crystallinity, low surface roughness, and thickness-tunability, this system provides an important study of attributes valuable to high-performance organic electronic devices.
RESUMEN
Air-stable organic semiconductors based on tetrathiafuluvalene (TTF) were developed by synthesising a series of dinaphthotetrathiafulvalene bisimides (DNTTF-Im) using electron-donating TTF, π-extended naphthalene, and electron-withdrawing imide. Electron-spin-resonance spectroscopy and X-ray single-crystal structure analysis of aryl-substituted DNTTF-Im radical cations confirmed that localisation of the spin resides on the electron-donating TTF moiety. The organic field-effect transistor properties derived from the use of highly crystalline n-butyl (C4) and n-hexyl(C6)-substituted DNTTF-Im were assessed. The hole carrier mobility of C6-DNTTF-Im was improved from 3.7×10-3 â cm2 V-1 s-1 to 0.30â cm2 V-1 s-1 in ambient conditions. This is attributed to the raise of the substrate temperature from 25 °C to 200 °C during sublimation. The XRD and microscopy analysis suggested that increasing the substrate temperature accelerates the end-on packing resulting in larger grains suitable for hole charge transport parallel to the substrate.
RESUMEN
We investigate the delocalization of holes in the semicrystalline conjugated polymer poly(2,5-bis(3-alkylthiophene-2-yl)thieno[3,2-b]thiophene) (PBTTT) by directly measuring the hyperfine coupling between photogenerated polarons and bound nuclear spins using electron nuclear double resonance spectroscopy. An extrapolation of the corresponding oligomer spectra reveals that charges tend to delocalize over 4.0-4.8 nm with delocalization strongly dependent on molecular order and crystallinity of the PBTTT polymer thin films. Density functional theory calculations of hyperfine couplings confirm that long-range corrected functionals appropriately describe the change in coupling strength with increasing oligomer size and agree well with the experimentally measured polymer limit. Our discussion presents general guidelines illustrating the various pitfalls and opportunities when deducing polaron localization lengths from hyperfine coupling spectra of conjugated polymers.
RESUMEN
Polycyclic aromatic hydrocarbons (PAHs), consisting of laterally fused benzene rings, are among the most widely studied small-molecule organic semiconductors, with potential applications in organic field-effect transistors (OFETs) and organic photovoltaics (OPVs). Linear acenes, including tetracene, pentacene, and their derivatives, have received particular attention due to the synthetic flexibility in tuning their chemical structure and properties and to their high device performance. Unfortunately, longer acenes, which could exhibit even better performance, are susceptible to oxidation, photodegradation, and, in solar cells which contain fullerenes, Diels-Alder reactions. This Account highlights recent advances in the molecular design of two-dimensional (2-D) PAHs that combine device performance with environmental stability. New synthetic techniques have been developed to create stable PAHs that extend conjugation in two dimensions. The stability of these novel compounds is consistent with Clar's sextet rule as the 2-D PAHs have greater numbers of sextets in their ground-state configuration than their linear analogues. The ionization potentials (IPs) of nonlinear acenes decrease more slowly with annellation in comparison to their linear counterparts. As a result, 2-D bistetracene derivatives that are composed of eight fused benzene rings are measured to be about 200 times more stable in chlorinated organic solvents than pentacene derivatives with only five fused rings. Single crystals of the bistetracene derivatives have hole mobilities, measured in OFET configuration, up to 6.1 cm(2) V(-1) s(-1), with remarkable Ion/Ioff ratios of 10(7). The density functional theory (DFT) calculations can provide insight into the electronic structures at both molecular and material levels and to evaluate the main charge-transport parameters. The 2-D acenes with large aspect ratios and appropriate substituents have the potential to provide favorable interstack electronic interactions, and correspondingly high carrier mobilities. In stark contrast to the 1-D acenes that form mono- and bis-adducts with fullerenes, 2-D PAHs show less reactivity with fullerenes. The geometry of 2-D PAHs plays a crucial role in determining both the barrier and the adduct stability. The reactivity and stability of the 2-D PAHs with regard to Diels-Alder reactions at different reactive sites were explained via DFT calculations of the reaction kinetics and of thermodynamics of reactions and simple Hückel molecular orbital considerations. Also, because of their increased stability in the presence of fullerenes, these compounds have been successfully used in OPVs. The small-molecule semiconductors highlighted in this Account exhibit good charge-transport properties, comparable to those of traditional linear acenes, while being much more environmentally stable. These features have made these 2-D PAHs excellent molecules for fundamental research and device applications.
RESUMEN
We present scanning tunneling microscopy and spectroscopy (STM/STS) investigations of the electronic structures of different alkyl-substituted oligothiophenes on the Au(111) surface. STM imaging showed that on Au(111), oligothiophenes adopted distinct straight and bent conformations. By combining STS maps with STM images, we visualize, in real space, particle-in-a-box-like oligothiophene molecular orbitals. We demonstrate that different planar conformers with significant geometrical distortions of oligothiophene backbones surprisingly exhibit very similar electronic structures, indicating a low degree of conformation-induced electronic disorder. The agreement of these results with gas-phase density functional theory calculations implies that the oligothiophene interaction with the Au(111) surface is generally insensitive to molecular conformation.
RESUMEN
Replacing or minimizing the use of halogenated organic solvents in the processing and manufacturing of conjugated polymer-based organic electronics has emerged as an important issue due to concerns regarding toxicity, environmental impact, and high cost. To date, however, the processing of well-ordered conjugated polymer nanostructures has been difficult to achieve using environmentally benign solvents. In this work, we report the development of water and alcohol processable nanowires (NWs) with well-defined crystalline nanostructure based on the solution assembly of azide functionalized poly(3-hexylthiophene) (P3HT-azide) and subsequent photo-cross-linking and functionalization of these NWs. The solution-assembled P3HT-azide NWs were successfully cross-linked by exposure to UV light, yielding good thermal and chemical stability. Residual azide units on the photo-cross-linked NWs were then functionalized with alkyne terminated polyethylene glycol (PEG-alkyne) using copper catalyzed azide-alkyne cycloaddition chemistry. PEG functionalization of the cross-linked P3HT-azide NWs allowed for stable dispersion in alcohols and water, while maintaining well-ordered NW structures with electronic properties suitable for the fabrication of organic field effect transistors (OFETs).
RESUMEN
We demonstrate the use of poly(sulfobetaine methacrylate) (PSBMA), and its pyrene-containing copolymer, as solution-processable work function reducers for inverted organic electronic devices. A notable feature of PSBMA is its orthogonal solubility relative to solvents typically employed in the processing of organic semiconductors. A strong permanent dipole moment on the sulfobetaine moiety was calculated by density functional theory. PSBMA interlayers reduced the work function of metals, graphene, and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) by over 1 eV, and an ultrathin interlayer of PSBMA reduced the electron injection barrier between indium tin oxide (ITO) and C70 by 0.67 eV. As a result, the performance of organic photovoltaic devices with PSBMA interlayers is significantly improved, and enhanced electron injection is demonstrated in electron-only devices with ITO, PEDOT:PSS, and graphene electrodes. This work makes available a new class of dipole-rich, counterion-free, pH insensitive polymer interlayers with demonstrated effectiveness in inverted devices.
RESUMEN
High molecular weight PBTTT-C12 is blended with the pure trimer, BTTT-3, to enhance intergrain connectivity and charge transport. Analysis of the morphology and crystallinity of the blends shows that the polymer and oligomer are well-integrated, leading to high hole mobilities, greater than 0.1 cm(2) V(-1) s(-1), in films that contain as much as 83% oligomer.
RESUMEN
The most efficient architecture for achieving high donor/acceptor interfacial area in organic photovoltaics (OPVs) would employ arrays of vertically interdigitated p- and n- type semiconductor nanopillars (NPs). Such morphology could have an advantage in bulk heterojunction systems; however, precise control of the dimension morphology in a crystalline, interpenetrating architecture has not yet been realized. Here we present a simple, yet facile, crystallization technique for the growth of vertically oriented NPs utilizing a modified thermal evaporation technique that hinges on a fast deposition rate, short substrate-source distance, and ballistic mass transport. A broad range of organic semiconductor materials is beneficial from the technique to generate NP geometries. Moreover, this technique can also be generalized to various substrates, namely, graphene, PEDOT-PSS, ZnO, CuI, MoO3, and MoS2. The advantage of the NP architecture over the conventional thin film counterpart is demonstrated with an increase of power conversion efficiency of 32% in photovoltaics. This technique will advance the knowledge of organic semiconductor crystallization and create opportunities for the fabrication and processing of NPs for applications that include solar cells, charge storage devices, sensors, and vertical transistors.
RESUMEN
Due to the unique crystallinity of poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT), it is an excellent model polymer to study the structure-property relationship in organic devices, especially those relying on junctions of electron- and hole-transporting materials. Here, we report the synthesis and characterization of a series of monodisperse PBTTT oligothiophenes (n = 1-5) and systematically examine the evolution of crystalline behavior, morphology, and interaction with [6,6]-phenyl C61-butyric acid methyl ester (PCBM) as the molecular conjugation length increases. We discovered that fullerene intercalation occurs when there is enough free volume between the side chains to accommodate the fullerene molecule. The intercalation of PCBM is observed beyond BTTT-2 and longer oligomers, likely similar to that of PBTTT. Interestingly, both experiments and molecular simulations show that PCBM intercalation also appears to "catalyze" a more efficient packing of the BTTT-2 dimers. Crystal structure analysis revealed that the straight BTTT-2 side chains form one-dimensional (1D) channels that could perfectly host PCBM but, in the pure material, accommodate the interdigitated side chains from adjacent layers. In the blend with PCBM, these channels are maintained and enable the cocrystallization and intercalation of PCBM. This is the first time the actual sublattice cell of PCBM has been determined from the X-ray data, and demonstration the utility of the oligomers as model systems for their polymer counterparts. Among the organic photovoltaic devices (OPVs) made from the BTTT oligomers and [6,6]-phenyl C71-butyric acid methyl ester (PC71BM) blends, the ones containing the BTTT-2 dimer exhibit the highest performance.
RESUMEN
The Diels-Alder (DA) reactions of pentacene (PT), 6,13-bis(2-trimethylsilylethynyl)pentacene (TMS-PT), bistetracene (BT), and 8,17-bis(2-trimethylsilylethynyl)bistetracene (TMS-BT) with the [6,6] double bond of [60]fullerene have been investigated by density functional theory calculations. Reaction barriers and free energies have been obtained to assess the effects of frameworks and substituent groups on the DA reactivity and product stability. Calculations indicate that TMS-BT is about 5 orders of magnitude less reactive than TMS-PT in the reactions with [60]fullerene. This accounts for the observed much higher stability of TIPS-BT than TIPS-PT when mixed with PCBM. Surprisingly, calculations predict that the bulky silylethynyl substituents of TMS-PT and TMS-BT have only a small influence on reaction barriers. However, the silylethynyl substituents significantly destabilize the corresponding products due to steric repulsions in the adducts. This is confirmed by experimental results here. Architectures of the polycyclic aromatic hydrocarbons (PAHs) play a crucial role in determining both the DA barrier and the adduct stability. The reactivities of different sites in various PAHs are related to the loss of aromaticity, which can be predicted using the simple Hückel molecular orbital localization energy calculations.
RESUMEN
We report the synthesis and characterization of "bistetracene", an unconventional, linearly extended conjugated core with eight fused rings. The annellation mode of the system allows for increased stability of the conjugated system relative to linear analogues due to the increased number of Clar aromatic sextets. By attaching the appropriate solubilizing substituents, efficient molecular packing with large transfer integrals can be obtained. The electronic structure calculations suggest these large polycyclic aromatic hydrocarbons (PAHs) exhibit excellent intrinsic charge transport properties. Charge carrier mobilities as large as 6.1 cm(2) V(-1) s(-1) and current on/off ratios of 10(7) were determined experimentally for one of our compounds. Our study provides valuable insight into the design of unconventional semiconductor compounds based on higher PAHs for use in high-performance devices.
RESUMEN
The primary role of substituted side chains in organic semiconductors is to increase their solubility in common organic solvents. In the recent past, many literature reports have suggested that the side chains play a critical role in molecular packing and strongly impact the charge transport properties of conjugated polymers. In this work, we have investigated the influence of side-chains on the charge transport behavior of a novel class of diketopyrrolopyrrole (DPP) based alternating copolymers. To investigate the role of side-chains, we prepared four diketopyrrolopyrrole-diketopyrrolopyrrole (DPP-DPP) conjugated polymers with varied side-chains and carried out a systematic study of thin film microstructure and charge transport properties in polymer thin-film transistors (PTFTs). Combining results obtained from grazing incidence X-ray diffraction (GIXD) and charge transport properties in PTFTs, we conclude side-chains have a strong influence on molecular packing, thin film microstructure, and the charge carrier mobility of DPP-DPP copolymers. However, the influence of side-chains on optical properties was moderate. The preferential "edge-on" packing and dominant n-channel behavior with exceptionally high field-effect electron mobility values of >1 cm(2) V(-1) s(-1) were observed by incorporating hydrophilic (triethylene glycol) and hydrophobic side-chains of alternate DPP units. In contrast, moderate electron and hole mobilities were observed by incorporation of branched hydrophobic side-chains. This work clearly demonstrates that the subtle balance between hydrophobicity and hydrophilicity induced by side-chains is a powerful strategy to alter the molecular packing and improve the ambipolar charge transport properties in DPP-DPP based conjugated polymers. Theoretical analysis supports the conclusion that the side-chains influence polymer properties through morphology changes, as there is no effect on the electronic properties in the gas phase. The exceptional electron mobility is at least partially a result of the strong intramolecular conjugation of the donor and acceptor as evidenced by the unusually wide conduction band of the polymer.
RESUMEN
The use of Rozen's reagent (HOFâ CH3 CN) to convert polythiophenes to polymers containing thiophene-1,1-dioxide (TDO) is described. The oxidation of polythiophenes can be controlled with this potent, yet orthogonal reagent under mild conditions. The oxidation of poly(3-alkylthiophenes) proceeds at room temperature in a matter of minutes, introducing up to 60 % TDO moieties in the polymer backbone. The resulting polymers have a markedly low-lying lowest unoccupied molecular orbital (LUMO), consequently exhibiting a small bandgap. This approach demonstrates that modulating the backbone electronic structure of well-defined polymers, rather than varying the monomers, is an efficient means of tuning the electronic properties of conjugated polymers.