A fluoride-induced aggregation test to quickly assess the efficiency of ligand exchange procedures from citrate capped AuNPs.

Hypothesis: Citrate capped gold nanoparticles (AuNPs-citrate) are the starting material for most of the academic and industrial applications using gold nanoparticles. AuNPs-citrate must usually be functionalized with organic (bio)molecules, through a ligand exchange process, to become suitable for the envisaged application. The evaluation of the efficiency of the ligand-exchange process with a simple and convenient procedure is challenging. Experiments: Fluoride was used to evaluate the efficiency of a ligand exchange process from AuNPs-citrate with five standard types of ligands. The relationship between the aggregation level of the AuNPs exposed to fluoride and the amount of residual citrate ligands at the surface of the AuNPs was studied. The fluoride-induced aggregation process was characterized with various techniques such as TEM, UV-Vis, ATR-FTIR or MANTA and then used to quickly identify the optimal conditions for the functionalization of AuNPs-citrate with a new ligand, i.e. a PEGylated calixarene-tetradiazonium salt (X4-(PEG)4). Findings: It was observed that the fluoride-induced aggregation of AuNPs is proportional to the efficiency of the ligands exchange. We believe that these results could benefit to everyone engineering AuNPs for advanced applications, as the fluoride-aggregation of AuNPs can be used as a general and versatile quality test to verify the coating density of organic (bio)molecules on AuNPs.

Ultrastable Silver Nanoparticles for Rapid Serology Detection of Anti-SARS-CoV-2 Immunoglobulins G.

Dipstick assays using silver nanoparticles (AgNPs) stabilized by a thin calix[4]arene-based coating were developed and used for the detection of Anti-SARS-CoV-2 IgG in clinical samples. The calixarene-based coating enabled the covalent bioconjugation of the SARS-CoV-2 Spike Protein via the classical EDC/sulfo-NHS procedure. It further conferred remarkable stability to the resulting bioconjugated AgNPs, as no degradation was observed over several months. In comparison with lateral-flow immunoassays (LFIAs) based on classical gold nanoparticles, our AgNP-based system constitutes a clear step forward, as the limit of detection for Anti-SARS-CoV-2 IgG was reduced by 1 order of magnitude and similar signals were observed with 10 times fewer particles. In real clinical samples, the AgNP-based dipstick assays showed impressive results: 100% specificity was observed for negative samples, while a sensitivity of 73% was determined for positive samples. These values match the typical sensitivities obtained for reported LFIAs based on gold nanoparticles. These results (i) represent one of the first examples of the use of AgNP-based dipstick assays in the case of real clinical samples, (ii) demonstrate that ultrastable calixarene-coated AgNPs could advantageously replace AuNPs in LFIAs, and thus (iii) open new perspectives in the field of rapid diagnostic tests.

Bifunctional Calix[4]arene-Coated Gold Nanoparticles for Orthogonal Conjugation.

Gold nanoparticles (AuNPs) are currently intensively exploited in the biomedical field as they possess interesting chemical and optical properties. Although their synthesis is well-known, their controlled surface modification with defined densities of ligands such as peptides, DNA, or antibodies remains challenging and has generally to be optimized case by case. This is particularly true for applications like in vivo drug delivery that require AuNPs with multiple ligands, for example a targeting ligand and a drug in well-defined proportions. In this context, we aimed to develop a calixarene-modification strategy that would allow the controlled orthogonal conjugation of AuNPs, respectively, via amide bond formation and copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC). To do this, we synthesized a calix[4]arene-tetradiazonium salt bearing four PEG chains ended by an alkyne group (C1) and, after optimization of its grafting on 20 nm AuNPs, we demonstrated that CuAAC can be used to conjugate an azide containing dye (N3-cya7.5). It was observed that AuNPs coated with C1 (AuNPs-C1) can be conjugated to approximately 600 N3-cya7.5 that is much higher than the value obtained for AuNPs decorated with traditional thiolated PEG ligands terminated by an alkyne group. The control over the number of molecules conjugated via CuAAC was even possible by incorporating a non-functional calixarene (C2) into the coating layer. We then combined C1 with a calix[4]arene-tetradiazonium salt bearing four carboxyl groups (C3) that allows conjugation of an amine (NH2-cya7.5) containing dye. The conjugation potential of these bifunctional AuNPs-C1/C3 was quantified by UV-vis spectroscopy: AuNPs decorated with equal amount of C1 and C3 could be conjugated to approximately 350 NH2-dyes and 300 N3-dyes using successively amide bond formation and CuAAC, demonstrating the control over the orthogonal conjugation. Such nanoconstructs could benefit to anyone in the need of a controlled modification of AuNPs with two different molecules via two different chemistries.

Magnetic Self-Healing Composites: Synthesis and Applications.

Magnetic composites and self-healing materials have been drawing much attention in their respective fields of application. Magnetic fillers enable changes in the material properties of objects, in the shapes and structures of objects, and ultimately in the motion and actuation of objects in response to the application of an external field. Self-healing materials possess the ability to repair incurred damage and consequently recover the functional properties during healing. The combination of these two unique features results in important advances in both fields. First, the self-healing ability enables the recovery of the magnetic properties of magnetic composites and structures to extend their service lifetimes in applications such as robotics and biomedicine. Second, magnetic (nano)particles offer many opportunities to improve the healing performance of the resulting self-healing magnetic composites. Magnetic fillers are used for the remote activation of thermal healing through inductive heating and for the closure of large damage by applying an alternating or constant external magnetic field, respectively. Furthermore, hard magnetic particles can be used to permanently magnetize self-healing composites to autonomously re-join severed parts. This paper reviews the synthesis, processing and manufacturing of magnetic self-healing composites for applications in health, robotic actuation, flexible electronics, and many more.

Ultrastable PEGylated Calixarene-Coated Gold Nanoparticles with a Tunable Bioconjugation Density for Biosensing Applications.

Many in vivo and in vitro applications using gold nanoparticles (AuNPs) require (i) their PEGylation, as it increases their stability and prevents nonspecific protein adsorption, and (ii) their conjugation to biomolecules, that provides them with specific recognition properties. Currently, the functionalization of AuNPs is based on thiol chemistry that suffers from two major drawbacks: (i) the Au-S bond is labile and confers limited chemical robustness to the organic layer, and (ii) control over the bioconjugation density is highly challenging. We report here a novel functionalization strategy based on calix[4]arene-tetradiazonium platforms for the coating of AuNPs with a robust PEG layer and their controlled bioconjugation. AuNPs were first modified with a functional calix[4]arene-diazonium salt bearing three PEG chains ended by a methoxy group and one by a carboxyl group. The resulting particles showed excellent chemical and colloidal stabilities, compared to similar systems obtained via a classical thiol chemistry, and could even be dispersed in human serum without degrading or aggregating. In addition to that, the carboxyl groups protruding from the PEG layer allowed their conjugation via amide bond formation with amine-containing biomolecules such as peptides. The control of the bioconjugation was obtained by grafting mixed layers of functional and nonfunctional PEGylated calix[4]arenes, that allowed varying the number of functional groups carried by the AuNPs and subsequently their bioconjugation capacity while preserving their dense protective PEG shell. Finally, we used these nanomaterials, modified with peptide aptamers, for the in vitro biosensing of a cancer biomarker, Mdm2.

Kinetics of Nanoparticle-Membrane Adhesion Mediated by Multivalent Interactions.

Multivalent adhesive interactions mediated by a large number of ligands and receptors underpin many biological processes, including cell adhesion and the uptake of particles, viruses, parasites, and nanomedical vectors. In materials science, multivalent interactions between colloidal particles have enabled unprecedented control over the phase behavior of self-assembled materials. Theoretical and experimental studies have pinpointed the relationship between equilibrium states and microscopic system parameters such as the ligand-receptor binding strength and their density. In regimes of strong interactions, however, kinetic factors are expected to slow down equilibration and lead to the emergence of long-lived out-of-equilibrium states that may significantly influence the outcome of self-assembly experiments and the adhesion of particles to biological membranes. Here we experimentally investigate the kinetics of adhesion of nanoparticles to biomimetic lipid membranes. Multivalent interactions are reproduced by strongly interacting DNA constructs, playing the role of both ligands and receptors. The rate of nanoparticle adhesion is investigated as a function of the surface density of membrane-anchored receptors and the bulk concentration of nanoparticles and is observed to decrease substantially in regimes where the number of available receptors is limited compared to the overall number of ligands. We attribute such peculiar behavior to the rapid sequestration of available receptors after initial nanoparticle adsorption. The experimental trends and the proposed interpretation are supported by numerical simulations.

Submerging a Biomimetic Metallo-Receptor in Water for Molecular Recognition: Micellar Incorporation or Water Solubilization? A Case Study.

Molecular recognition in water is an important topic, but a challenging task due to the very competitive nature of the medium. The focus of this study is the comparison of two different strategies for the water solubilization of a biomimetic metallo-receptor based on a poly(imidazole) resorcinarene core. The first relies on a new synthetic path for the introduction of hydrophilic substituents on the receptor, at a remote distance from the coordination site. The second involves the incorporation of the organosoluble metallo-receptor into dodecylphosphocholine (DPC) micelles, which mimic the proteic surrounding of the active site of metallo-enzymes. The resorcinarene ligand can be transferred into water through both strategies, in which it binds ZnII over a wide pH window. Quite surprisingly, very similar metal ion affinities, pH responses, and recognition properties were observed with both strategies. The systems behave as remarkable receptors for small organic anions in water at near-physiological pH. These results show that, provided the biomimetic site is well structured and presents a recognition pocket, the micellar environment has very little impact on either metal ion binding or guest hosting. Hence, micellar incorporation represents an easy alternative to difficult synthetic work, even for the binding of charged species (metal cations or anions), which opens new perspectives for molecular recognition in water, whether for sensing, transport, or catalysis.

Versatile Self-Adapting Boronic Acids for H-Bond Recognition: From Discrete to Polymeric Supramolecules.

Because of the peculiar dynamic covalent reactivity of boronic acids to form tetraboronate derivatives, interest in using their aryl derivatives in materials science and supramolecular chemistry has risen. Nevertheless, their ability to form H-bonded complexes has been only marginally touched. Herein we report the first solution and solid-state binding studies of the first double-H-bonded DD·AA-type complexes of a series of aromatic boronic acids that adopt a syn-syn conformation with suitable complementary H-bonding acceptor partners. The first determination of the association constant (Ka) of ortho-substituted boronic acids in solution showed that Ka for 1:1 association is in the range between 300 and 6900 M-1. Crystallization of dimeric 1:1 and trimeric 1:2 and 2:1 complexes enabled an in-depth examination of these complexes in the solid state, proving the selection of the -B(OH)2 syn-syn conformer through a pair of frontal H-bonds with the relevant AA partner. Non-ortho-substituted boronic acids result in "flat" complexes. On the other hand, sterically demanding analogues bearing ortho substituents strive to retain their recognition properties by rotation of the ArB(OH)2 moiety, forming "T-shaped" complexes. Solid-state studies of a diboronic acid and a tetraazanaphthacene provided for the first time the formation of a supramolecular H-bonded polymeric ribbon. On the basis of the conformational dynamicity of the -B(OH)2 functional group, it is expected that these findings will also open new possibilities in metal-free catalysis or organic crystal engineering, where double-H-bonding donor boronic acids could act as suitable organocatalysts or templates for the development of functional materials with tailored organizational properties.

Controlled Functionalization of Gold Nanoparticles with Mixtures of Calix[4]arenes Revealed by Infrared Spectroscopy.

Labile ligands such as thiols and carboxylates are commonly used to functionalize AuNPs, though little control over the composition is possible when mixtures of ligands are used. It was shown recently that robustly functionalized AuNPs can be obtained through the reductive grafting of calix[4]arenes bearing diazonium groups on the large rim. Here, we report a calix[4]arene-tetradiazonium decorated by four oligo(ethylene glycol) chains on the small rim, which upon grafting gave AuNPs with excellent stability thanks to the C-Au bonds. Mixtures of this calixarene and one with four carboxylate groups were grafted on AuNPs. The resulting particles were analyzed by infrared spectroscopy, which revealed that the composition of the ligand shell clearly reflected the ratio of calixarenes that was present in solution. This strategy opens the way to robustly protected AuNPs with well-defined numbers of functional or postfunctionalizable groups.

Kinetic and Thermodynamic Stabilization of Metal Complexes by Introverted Coordination in a Calix[6]azacryptand.

The Huisgen thermal reaction between an organic azide and an acetylene was employed for the selective monofunctionalization of a X6 -azacryptand ligand bearing a tren coordinating unit [X6 stands for calix[6]arene and tren for tris(2-aminoethyl)amine]. Supramolecular assistance, originating from the formation of a host-guest inclusion complex between the reactants, greatly accelerates the reaction while self-inhibition affords a remarkable selectivity. The new ligand possesses a single amino-leg appended at the large rim of the calixarene core and the corresponding Zn(2+) complex was characterized both in solution and in the solid state. The coordination of Zn(2+) not only involves the tren cap but also the introverted amino-leg, which locks the metal ion in the cavity. Compared with the parent ligand deprived of the amino-leg, the affinity of the new monofunctionalized X6 tren ligand 6 for Zn(2+) is found to have a 10-fold increase in DMSO, which is a very competitive solvent, and with an enhancement of at least three orders of magnitude in CDCl3 /CD3 OD (1:1, v/v). In strong contrast with the fast binding kinetics, decoordination of Zn(2+) as well as transmetallation appeared to be very slow processes. The monofunctionalized X6 tren ligand 6 fully protects the metal ion from the external medium thanks to the combination of a cavity and a closed coordination sphere, leading to greater thermodynamic and kinetic stabilities.

Triplet-triplet annihilation upconversion followed by FRET for the red light activation of a photodissociative ruthenium complex in liposomes.

Upconversion is a promising way to trigger high-energy photochemistry with low-energy photons. However, combining upconversion schemes with non-radiative energy transfer is challenging because bringing several photochemically active components in close proximity results in complex multi-component systems where quenching processes may deactivate the whole assembly. In this work, PEGylated liposomes were prepared that contained three photoactive components: a porphyrin dye absorbing red light, a perylene moiety emitting in the blue, and a light-activatable ruthenium prodrug sensitive to blue light. Time-dependent spectroscopic studies demonstrate that singlet perylene excited states are non-radiatively transferred to the nearby ruthenium complex by Förster resonance energy transfer (FRET). Under red-light irradiation of the three-component membranes, triplet-triplet annihilation upconversion (TTA-UC) occurs followed by FRET, which results in a more efficient activation of the ruthenium prodrug compared to a physical mixture of two-component upconverting liposomes and liposomes containing only the ruthenium complex. This work represents a rare example where TTA-UC and Förster resonance energy transfer are combined to achieve prodrug activation in the phototherapeutic window.

Binding of a ruthenium complex to a thioether ligand embedded in a negatively charged lipid bilayer: a two-step mechanism.

The interaction between the ruthenium polypyridyl complex [Ru(terpy)(dcbpy)(H2O)](2+) (terpy = 2,2';6',2"-terpyridine, dcbpy = 6,6'-dichloro-2,2'-bipyridine) and phospholipid membranes containing either thioether ligands or cholesterol were investigated using UV-visible spectroscopy, Langmuir-Blodgett monolayer surface pressure measurements, and isothermal titration calorimety (ITC). When embedded in a membrane, the thioether ligand coordinated to the dicationic metal complex only when the phospholipids of the membrane were negatively charged, that is, in the presence of attractive electrostatic interaction. In such a case coordination is much faster than in homogeneous conditions. A two-step model for the coordination of the metal complex to the membrane-embedded sulfur ligand is proposed, in which adsorption of the complex to the negative surface of the monolayers or bilayers occurs within minutes, whereas formation of the coordination bond between the surface-bound metal complex and ligand takes hours. Finally, adsorption of the aqua complex to the membrane is driven by entropy. It does not involve insertion of the metal complex into the hydrophobic lipid layer, but rather simple electrostatic adsorption at the water-bilayer interface.

Molecular origin of the hydrolytic activity and fixed regioselectivity of a Zr(IV) -substituted polyoxotungstate as artificial protease.

A multitechnique approach has been applied in order to identify the thermodynamic and kinetic parameters related to the regioselective hydrolysis of human serum albumin (HSA) promoted by the Wells-Dawson polyoxometalate (POM), K15 H[Zr(α2 -P2 W17 O61 )2 ]. Isothermal titration calorimetry (ITC) studies indicate that up to four POM molecules interact with HSA. While the first interaction site is characterized by a 1:1 binding and an affinity constant of 2×10(8) M(-1) , the three remaining sites are characterized by a lower global affinity constant of 7×10(5) M(-1) . The higher affinity constant at the first site is in accordance with a high quenching constant of 2.2×10(8) M(-1) obtained for fluorescence quenching of the Trp214 residue located in the only positively charged cleft of HSA, in the presence of K15 H[Zr(α2 -P2 W17 O61 )2 ]. In addition, Eu(III) luminescence experiments with an Eu(III) -substituted POM analogue have shown the replacement of water molecules in the first coordination sphere of Eu(III) due to binding of the metal ion to amino acid side chain residues of HSA. All three interaction studies are in accordance with a stronger POM dominated binding at the positive cleft on the one hand, and interaction mainly governed by metal anchoring at the three remaining positions, on the other hand. Hydrolysis experiments in the presence of K15 H[Zr(α2 -P2 W17 O61 )2 ] have demonstrated regioselective cleavage of HSA at the Arg114Leu115, Ala257Asp258, Lys313Asp314 or Cys392Glu393 peptide bonds. This is in agreement with the interaction studies as the Arg114Leu115 peptide bond is located in the positive cleft of HSA and the three remaining peptide bonds are each located near an upstream acidic residue, which can be expected to coordinate to the metal ion. A detailed kinetic study has evidenced the formation of additional fragments upon prolonged reaction times. Edman degradation of the additional reaction products has shown that these fragments result from further hydrolysis at the initially observed cleavage positions, indicating a fixed selectivity for K15 H[Zr(α2 -P2 W17 O61 )2 ].

Fluorescent chemosensors for anions and contact ion pairs with a cavity-based selectivity.

The association of a concave macrocyclic compound to one or multiple fluorophores is an appealing strategy for the design of chemosensors. Indeed, as with biological systems, a cavity-based selectivity can be expected with such fluorescent receptors. Examples of calix[6]arene-based systems using this strategy are rare in the literature, and to our knowledge, no examples of fluorescent receptors that can bind organic contact ion pairs have been reported. This report describes the straightforward synthesis of fluorescent calix[6]arene-based receptors 4a and 4b bearing three pyrenyl subunits and the study of their binding properties toward anions and ammonium salts using different spectroscopies. It was found that receptor 4a exhibits a remarkable selectivity for the sulfate anion in DMSO, enabling its selective sensing by fluorescence spectroscopy. In CDCl3, the receptor is able to bind ammonium ions efficiently only in association with the sulfate anion. Interestingly, this cooperative binding of ammonium sulfate salts was also evidenced in a protic environment. Finally, a cavity-based selectivity in terms of size and shape of the guest was observed with both receptors 4a and 4b, opening interesting perspectives on the elaboration of fluorescent cavity-based systems for the selective sensing of biologically relevant ammonium salts such as neurotransmitters.

Ultra-stable silver nanoplates: efficient and versatile colorimetric reporters for dipstick assays.

Noble metal anisotropic nanostructures, such as silver nanoplates (AgNPls), are interesting because they possess enhanced plasmonic properties compared to their spherical counterparts: increased extinction coefficient and tunable maximum of absorption wavelength. However, their use for biosensing application is limited as these structures are intrinsically unstable and, to maintain the anisotropic structure, a coating protecting the metallic surface is required. In this work, we report on the capacity of a thin but robust coating based on calixarene-diazonium salts to maintain the structure anisotropy of silver nanoplates in conditions in which traditionally used coatings fail. We synthesized AgNPls of various sizes and coated them with two different calixarenes, differing by the functional groups attached to their small rim. After characterization of the efficiency of the ligand exchange process between the initial citrate anions and the calixarenes, the chemical and colloidal stabilities of the resulting calixarene-coated AgNPls were compared to citrate-capped AgNPls. A radical improvement of the lifetime of the material from 1 day for AgNPls coated with citrate to more than 900 days for calixarene-coated AgNPls, as well as the stability in acidic conditions, phosphate saline buffer (PBS) or biofluid, were observed. Benefiting from this exceptional robustness, calixarene-coated AgNPls were exploited to design dipstick assays. Rabbit immunoglobulin G (IgG) detection was developed first as proof-of-concept. The optimal system was then used for the detection of Anti-SARS-CoV-2 IgG. In both cases, a picomolar limit of detection (LOD) was achieved as well as the detection in 100% of pooled human plasma. This sensitivity competes with that of ELISA and is better than the one previously obtained with gold or even silver nanospheres for the same target and in similar conditions. Finally, the wide range of colors provided by the AgNPls allowed the design of a multicolor multiplex assay for the simultaneous detection of multiple analytes.

Empirical Optimization of Peptide Sequence and Nanoparticle Colloidal Stability: The Impact of Surface Ligands and Implications for Colorimetric Sensing.

Surface ligands play a critical role in controlling and defining the properties of colloidal nanocrystals. These aspects have been exploited to design nanoparticle aggregation-based colorimetric sensors. Here, we coated 13-nm gold nanoparticles (AuNPs) with a large library of ligands (e.g., from labile monodentate monomers to multicoordinating macromolecules) and evaluated their aggregation propensity in the presence of three peptides containing charged, thiolate, or aromatic amino acids. Our results show that AuNPs coated with the polyphenols and sulfonated phosphine ligands were good choices for electrostatic-based aggregation. AuNPs capped with citrate and labile-binding polymers worked well for dithiol-bridging and π-π stacking-induced aggregation. In the example of electrostatic-based assays, we stress that good sensing performance requires aggregating peptides of low charge valence paired with charged NPs with weak stability and vice versa. We then present a modular peptide containing versatile aggregating residues to agglomerate a variety of ligated AuNPs for colorimetric detection of the coronavirus main protease. Enzymatic cleavage liberates the peptide segment, which in turn triggers NP agglomeration and thus rapid color changes in <10 min. The protease detection limit is 2.5 nM.

Peptide-Conjugated Silver Nanoparticles for the Colorimetric Detection of the Oncoprotein Mdm2 in Human Serum.

The development of efficient, reliable, and easy-to-use biosensors allowing early cancer diagnosis is of paramount importance for patients. Herein, we report a biosensor based on silver nanoparticles functionalized by peptide aptamers for the detection of a cancer biomarker, i. e. the Mdm2 protein. Silver nanoparticles (AgNPs) were produced and stabilized with a thin PEGylated-calix[4]arene layer that allows (i) the steric stabilization of the AgNPs and (ii) the covalent conjugation of the peptide aptamers via the formation of an amide bond. These peptide-conjugated AgNPs were then used to detect Mdm2 via a dual trapping strategy that was previously reported with gold nanoparticles (AuNPs). Our results showed that replacing AuNPs by AgNPs improves the detection limit by nearly one order of magnitude, down to 5 nM, while the high selectivity of the system and the stability of the particles provided by the calixarene coating allow the detection of Mdm2 in human serum.

Peptide-Conjugated Silver Nanoparticles for the Colorimetric Detection of the Oncoprotein Mdm2 in Human Serum.

Invited for this month's cover are the collaborating groups of Prof. Gilles Bruylants and Prof. Ivan Jabin, Université libre de Bruxelles, Belgium. The cover picture shows the principle of a colorimetric sensor, based on peptide-conjugated silver nanoparticles, for the detection of the cancer biomarker Mdm2. The particles were functionalized via a recently developed strategy based on the use of calixarene diazonium salts. The calixarene-based coating provides an unprecedented stability to the silver nanoparticles, enabling their use as colorimetric reporters for in vitro diagnostics. The cover was designed by I. Jabin. More information can be found in the Research Article by I. Jabin, G. Bruylants, and co-workers.

Atomic Force Manipulation of Single Magnetic Nanoparticles for Spin-Based Electronics.

Magnetic nanoparticles (MNPs) are instrumental for fabrication of tailored nanomagnetic structures, especially where top-down lithographic patterning is not feasible. Here, we demonstrate precise and controllable manipulation of individual magnetite MNPs using the tip of an atomic force microscope. We verify our approach by placing a single MNP with a diameter of 50 nm on top of a 100 nm Hall bar fabricated in a quasi-two-dimensional electron gas (q2DEG) at the oxide interface between LaAlO3 and SrTiO3 (LAO/STO). A hysteresis loop due to the magnetic hysteresis properties of the magnetite MNPs was observed in the Hall resistance. Further, the effective coercivity of the Hall resistance hysteresis loop could be changed upon field cooling at different angles of the cooling field with respect to the measuring field. The effect is associated with the alignment of the MNP magnetic moment along the easy axis closest to the external field direction across the Verwey transition in magnetite. Our results can facilitate experimental realization of magnetic proximity devices using single MNPs and two-dimensional materials for spin-based nanoelectronics.

Highly stable silver nanohybrid electrocatalysts for the oxygen reduction reaction.

Silver nanoparticles (AgNPs) were deliberately functionalized via aryl diazonium chemistry with a monolayer of calix[4]arenes. The resulting nanohybrids show high efficiency and high selectivity toward the ORR in alkaline media along with an exceptional durability and a high methanol tolerance.