Nanographene-Based Decoration as a Panchromatic Antenna for Metalloporphyrin Conjugates.

Porphyrins, a type of heterocyclic aromatic compounds consisting of tetrapyrroles connected by four substituted methine groups, are appealing building blocks for solar energy applications. However, their photosensitization capability is limited by their large optical energy gap, which results in a mismatch in absorption toward efficient harvesting of the solar spectrum. Porphyrin π-extension by edge-fusing with nanographenes can be employed for narrowing their optical energy gap from 2.35 to 1.08 eV, enabling the development of porphyrin-based panchromatic dyes with an optimized energy onset for solar energy conversion in dye-sensitized solar fuel and solar cell configurations. By combining time-dependent density functional theory with fs transient absorption spectroscopy, it is found that the primary singlets, which are delocalized across the entire aromatic part, are transferred into metal centred triplets in only 1.2 ps; and subsequently, relax toward ligand-delocalized triplets. This observation implies that the decoration of the porphyrin moiety with nanographenes, while having a large impact on the absorption onset of the novel dye, promotes the formation of a ligand-centred lowest triplet state of large spatial extension, potentially interesting for boosting interactions with electron scavengers. These results reveal a design strategy for broadening the applicability of porphyrin-based dyes in optoelectronics.

2D Cu(I)-I Coordination Polymer with Smart Optoelectronic Properties and Photocatalytic Activity as a Versatile Multifunctional Material.

This work presents two isostructural Cu(I)-I 2-fluoropyrazine (Fpyz) luminescent and semiconducting 2D coordination polymers (CPs). Hydrothermal synthesis allows the growth of P-1 space group single crystals, whereas solvent-free synthesis produces polycrystals. Via recrystallization in acetonitrile, P21 space group single crystals are obtained. Both show a reversible luminescent response to temperature and pressure. Structure determination by single-crystal X-ray diffraction at 200 and 100 K allows us to understand their response as a function of temperature. Applying hydrostatic/uniaxial pressure or grinding also generates significant variations in their emission. The high structural flexibility of the Cu(I)-I chain is significantly linked to the corresponding alterations in structure. Remarkably, pressure can increase the conductivity by up to 3 orders of magnitude. Variations in resistivity are consistent with changes in the band gap energy. The experimental results are in agreement with the DFT calculations. These properties may allow the use of these CPs as optical pressure or temperature sensors. In addition, their behavior as a heterogeneous photocatalyst of persistent organic dyes has also been investigated.

Donor-Acceptor-Donor 1H-Benzo[d]imidazole Derivatives as Optical Waveguides.

A new series of donor-acceptor-donor (D-A-D) structures derived from arylethynyl 1H-benzo[d]imidazole was synthesized and processed into single crystals with the goal of testing such crystals' ability to act as optical waveguides. Some crystals displayed luminescence in the 550-600 nm range and optical waveguiding behavior with optical loss coefficients around 10-2 dB/µm, which indicated a notable light transport. The crystalline structure, confirmed by X-ray diffraction, contains internal channels that are important for light propagation, as we previously reported. The combination of a 1D assembly, a single crystal structure, and notable light emission properties with low losses from self-absorption made 1H-benzo[d]imidazole derivatives appealing compounds for optical waveguide applications.

Boosting the Photoluminescent Properties of Protein-Stabilized Gold Nanoclusters through Protein Engineering.

This work reports on the use of protein engineering as a versatile tool to rationally design metal-binding proteins for the synthesis of highly photoluminescent protein-stabilized gold nanoclusters (Prot-AuNCs). The use of a single repeat protein scaffold allowed the incorporation of a set of designed metal-binding sites to understand the effect of the metal-coordinating residues and the protein environment on the photoluminescent (PL) properties of gold nanoclusters (AuNCs). The resulting Prot-AuNCs, synthesized by two sustainable procedures, showed size-tunable color emission and outstanding PL properties. In a second stage, tryptophan (Trp) residues were introduced at specific positions to provide an electron-rich protein environment and favor energy transfer from Trps to AuNCs. This modification resulted in improved PL properties relevant for future applications in sensing, biological labeling, catalysis, and optics.

Cove-Edged Hexa-peri-hexabenzo-bis-peri-octacene: Molecular Conformations and Amplified Spontaneous Emission.

The bottom-up synthesis of an unprecedentedly large cove-edged nanographene, hexa-peri-hexabenzo-bis-peri-octacene (HBPO), is reported in this work. Chiral high-performance liquid chromatography and density functional theory (DFT) calculations revealed multiple conformations in solution. Two different molecular conformations, "waggling" and "butterfly", were found in crystals by X-ray crystallography, and the selectivity of conformations could be tuned by solvents. The optoelectronic properties of HBPO were investigated by UV/Vis absorption and fluorescence spectroscopies, cyclic voltammetry, and DFT calculations. The contorted geometry and branched alkyl groups suppress the aggregation of HBPO in solution, leading to a high fluorescence quantum yield of 79 %. The optical-gain properties were explored through transient absorption and amplified spontaneous emission spectroscopies, which enrich the choices of edge structures for potential applications in laser cavities.

Organic Semiconductor Micro/Nanocrystals for Laser Applications.

Organic semiconductor micro/nanocrystals (OSMCs) have attracted great attention due to their numerous advantages such us free grain boundaries, minimal defects and traps, molecular diversity, low cost, flexibility and solution processability. Due to all these characteristics, they are strong candidates for the next generation of electronic and optoelectronic devices. In this review, we present a comprehensive overview of these OSMCs, discussing molecular packing, the methods to control crystallization and their applications to the area of organic solid-state lasers. Special emphasis is given to OSMC lasers which self-assemble into geometrically defined optical resonators owing to their attractive prospects for tuning/control of light emission properties through geometrical resonator design. The most recent developments together with novel strategies for light emission tuning and effective light extraction are presented.

Subppm Amine Detection via Absorption and Luminescence Turn-On Caused by Ligand Exchange in Metal Organic Frameworks.

Luminescent metal-organic frameworks (LMOFs) are promising materials for lighting and sensing applications. Herein, exposure of the highly luminescent Zn2(bpdc)2(bpee) MOF (H2bpdc = 4,4'-biphenyldicarboxylic acid and bpee = 1,2-bipyridylethene) to subppm amine contents turns on a new absorption band unambiguously ascribed to free bpee molecules concomitant with the gradual appearance of a new photoluminescence band at shorter wavelengths. These findings combined with Fourier-transform infrared spectra, powder X-ray diffraction and thermogravimetric analysis of exposed LMOF powders confirm that bpee ligands are exchanged by amines and released inside the LMOF, triggering absorption and luminescence features which can be exploited for highly sensitive amine recognition. This principle was demonstrated in mixed matrix membranes (MMMs) prepared by a simple solvent-free method consisting of mixing Zn2(bpdc)2(bpee) with dimethylvinyl-terminated dimethylsiloxane and dimethylhydrogen siloxane. This method enabled the production of free-standing, permeable, and highly transparent MMMs which showed enormous potential and sensitivity to the detection of amines in gas phase and aqueous medium.

A Simple Approach to Design Proteins for the Sustainable Synthesis of Metal Nanoclusters.

Metal nanoclusters (NCs) are considered ideal nanomaterials for biological applications owing to their strong photoluminescence (PL), excellent photostability, and good biocompatibility. This study presents a simple and versatile strategy to design proteins, via incorporation of a di-histidine cluster coordination site, for the sustainable synthesis and stabilization of metal NCs with different metal composition. The resulting protein-stabilized metal NCs (Prot-NCs) of gold, silver, and copper are highly photoluminescent and photostable, have a long shelf life, and are stable under physiological conditions. The biocompatibility of the clusters was demonstrated in cell cultures in which Prot-NCs showed efficient cell internalization without affecting cell viability or losing luminescence. Moreover, the approach is translatable to other proteins to obtain Prot-NCs for various biomedical applications such as cell imaging or labeling.

Effect of structure and interlayer diffusion in organic position sensitive photodetectors based on complementary wedge donor/acceptor layers.

We have developed organic photodetectors based on two complementary wedge layers made of CuPc and C60 and observed a strong spatial dependence of the spectral response on the position of the incident light spot. Photocurrent measurements are correlated with atomic force microscopy (AFM), micro-Raman and ellipsometry maps in order to provide insights into the local donor/acceptor concentration, layer thickness and nature of the donor-acceptor interface along the direction of the thickness gradient. Deviations in spatial dependence between experimental photocurrent values and those predicted with a model assuming a sharp and well defined organic-organic interface are discussed in terms of inter-diffusion layers.

Microstructure-driven annihilation effects and dispersive excited state dynamics in solid-state films of a model sensitizer for photon energy up-conversion applications.

Bimolecular processes involving exciton spin-state interactions gain attention for their deployment as wavelength-shifting tools. Particularly triplet-triplet annihilation induced photon energy up-conversion (TTA-UC) holds promise to enhance the performance of solar cell and photodetection technologies. Despite the progress noted, a correlation between the solid-state microstructure of photoactuating TTA-UC organic composites and their photophysical properties is missing. This lack of knowledge impedes the effective integration of functional TTA-UC interlayers as ancillary components in operating devices. We here investigate a solution-processed model green-to-blue TTA-UC binary composite. Solid-state films of a 9,10 diphenyl anthracene (DPA) blue-emitting activator blended with a (2,3,7,8,12,13,17,18-octaethyl-porphyrinato) PtII (PtOEP) green-absorbing sensitizer are prepared with a range of compositions and examined by a set of complementary characterization techniques. Grazing incidence X-ray diffractometry (GIXRD) measurements identify three PtOEP composition regions wherein the DPA:PtOEP composite microstructure varies due to changes in the packing motifs of the DPA and PtOEP phases. In Region 1 (≤2 wt%) DPA is semicrystalline and PtOEP is amorphous, in Region 2 (between 2 and 10 wt%) both DPA and PtOEP phases are amorphous, and in Region 3 (≥10 wt%) DPA remains amorphous and PtOEP is semicrystalline. GIXRD further reveals the metastable DPA-ß polymorph species as the dominant DPA phase in Region 1. Composition dependent UV-vis and FT-IR measurements identify physical PtOEP dimers, irrespective of the structural order in the PtOEP phase. Time-gated photoluminescence (PL) spectroscopy and scanning electron microscopy imaging confirm the presence of PtOEP aggregates, even after dispersing DPA:PtOEP in amorphous poly(styrene). When arrested in Regions 1 and 2, DPA:PtOEP exhibits delayed PtOEP fluorescence at 580 nm that follows a power-law decay on the ns time scale. The origin of PtOEP delayed fluorescence is unraveled by temperature- and fluence-dependent PL experiments. Triplet PtOEP excitations undergo dispersive diffusion and enable TTA reactions that activate the first singlet-excited (S1) PtOEP state. The effect is reproduced when PtOEP is mixed with a poly(fluorene-2-octyl) (PFO) derivative. Transient absorption measurements on PFO:PtOEP films find that selective PtOEP photoexcitation activates the S1 of PFO within ∼100 fs through an up-converted 3(d, d*) PtII-centered state.

Synergistic binding sites in a metal-organic framework for the optical sensing of nitrogen dioxide.

Luminescent metal-organic frameworks are an emerging class of optical sensors, able to capture and detect toxic gases. Herein, we report the incorporation of synergistic binding sites in MOF-808 through post-synthetic modification with copper for optical sensing of NO2 at remarkably low concentrations. Computational modelling and advanced synchrotron characterization tools are applied to elucidate the atomic structure of the copper sites. The excellent performance of Cu-MOF-808 is explained by the synergistic effect between the hydroxo/aquo-terminated Zr6O8 clusters and the copper-hydroxo single sites, where NO2 is adsorbed through combined dispersive- and metal-bonding interactions.

Multidimensional Ln-Aminophthalate Photoluminescent Coordination Polymers.

The development of straightforward reproducible methods for the preparation of new photoluminescent coordination polymers (CPs) is an important goal in luminescence and chemical sensing fields. Isophthalic acid derivatives have been reported for a wide range of applications, and in addition to their relatively low cost, have encouraged its use in the preparation of novel lanthanide-based coordination polymers (LnCPs). Considering that the photoluminescent properties of these CPs are highly dependent on the existence of water molecules in the crystal structure, our research efforts are now focused on the preparation of CP with the lowest water content possible, while considering a green chemistry approach. One- and two-dimensional (1D and 2D) LnCPs were prepared from 5-aminoisophthalic acid and Sm3+/Tb3+ using hydrothermal and/or microwave-assisted synthesis. The unprecedented LnCPs were characterized by single-crystal X-ray diffraction (SCRXD), powder X-ray diffraction (PXRD), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM), and their photoluminescence (PL) properties were studied in the solid state, at room temperature, using the CPs as powders and encapsulated in poly(methyl methacrylate (PMMA) films, envisaging the potential preparation of devices for sensing. The materials revealed interesting PL properties that depend on the dimensionality, metal ion, co-ligand used and water content.

Towards rainbow photo/electro-luminescence in copper(i) complexes with the versatile bridged bis-pyridyl ancillary ligand.

The synthesis and characterization of a family of copper(i) complexes bearing a bridged bis-pyridyl ancillary ligand is reported, highlighting how the bridge nature impacts the photo- and electro-luminescent behaviours within the family. In particular, the phosphonium bridge led to copper(i) complexes featuring good electrochemical stability and high ionic conductivity, as well as a stark blue-to-orange luminescence shift compared to the others. This resulted in high performance light-emitting electrochemical cells reaching stabilities of 10 mJ at ca. 40 cd m-2 that are one order of magnitude higher than those of the other complexes. Overall, this work sheds light onto the crucial role of the bridge nature of the bis-pyridyl ancillary ligand on the photophysical features, film forming and, in turn, on the final device performances.

Covalent modification of franckeite with maleimides: connecting molecules and van der Waals heterostructures.

The building of van der Waals heterostructures and the decoration of 2D materials with organic molecules share a common goal: to obtain ultrathin materials with tailored properties. Performing controlled chemistry on van der Waals heterostructures would add an extra level of complexity, providing a pathway towards 2D-2D-0D mixed-dimensional heterostructures. Here we show that thiol-ene-like "click" chemistry can be used to decorate franckeite, a naturally occurring van der Waals heterostructure with maleimide reagents. ATR-IR and NMR analyses corroborate the Michael addition mechanism via the formation of a S-C covalent bond, while Raman and HR-TEM show that the SnS2-PbS alternating structure of franckeite is preserved, and suggest that SnS2 reacts preferentially, which is confirmed through XPS. We illustrate how this methodology can be used to add functional molecular moieties by decorating franckeite with porphyrins. UV-vis-NIR spectroscopy confirms that the chromophore ground state remains operative, showing negligible ground-state interactions with the franckeite. Excited-state interactions across the hybrid interface are revealed. Time-resolved photoluminescence confirms the presence of excited-state deactivation in the linked porphyrin ascribed to energy transfer to the franckeite.

Revealing the Impact of Heat Generation Using Nanographene-Based Light-Emitting Electrochemical Cells.

Self-heating in light-emitting electrochemical cells (LECs) has been long overlooked, while it has a significant impact on (i) device chromaticity by changing the electroluminescent band shape, (ii) device efficiency because of thermal quenching and exciton dissociation reducing the external quantum efficiency (EQE), and (iii) device stability because of thermal degradation of excitons and eliminate doped species, phase separation, and collapse of the intrinsic emitting zone. Herein, we reveal, for the first time, a direct relationship between self-heating and the early changes in the device chromaticity as well as the magnitude of the error comparing theoretical/experimental EQEs-that is, an overestimation error of ca. 35% at usual pixel working temperatures of around 50 °C. This has been realized in LECs using a benchmark nanographene-that is, a substituted hexa-peri-hexabenzocoronene-as an emerging class of emitters with outstanding device performance compared to the prior art of small-molecule LECs-for example, luminances of 345 cd/m2 and EQEs of 0.35%. As such, this work is a fundamental contribution highlighting how self-heating is a critical limitation toward the optimization and wide use of LECs.

Bright, stable, and efficient red light-emitting electrochemical cells using contorted nanographenes.

This work rationalizes, for the first time, the electroluminescent behavior of a representative red-emitting contorted nanographene -i.e., hexabenzoovalene derivative - in small molecule light-emitting electrochemical cells (SM-LECs). This new emitter provides devices with irradiances of ca. 220 µW cm-2 (242 cd m-2), external quantum efficiencies (EQE) of 0.78% (<25% loss of the maximum theoretical EQE), and stabilities over 200 h. Upon optimizing the device architecture, the stability increased up to 3600 h (measured) and 13 000 h (extrapolated) at a high brightness of ca. 30 µW cm-2 (34 cd m-2). This represents a record stability at a high brightness level compared to the state-of-the-art SM-LECs (1000 h at 0.3 µW cm-2). In addition, we rationalized one of the very rare LEC examples in which the changes of the electroluminescence band shape relates to the dependence of the relative intensity of the vibrational peaks with electric field, as corroborated by dynamic electrochemical impedance spectroscopy assays. Nevertheless, this exclusive electroluminescence behavior does not affect the device color, realizing one of the most stable, bright, and efficient red-emitting SM-LECs up to date.

Divergent Adsorption-Dependent Luminescence of Amino-Functionalized Lanthanide Metal-Organic Frameworks for Highly Sensitive NO2 Sensors.

A novel gas sensing mechanism exploiting lanthanide luminescence modulation upon NO2 adsorption is demonstrated here. Two isostructural lanthanide-based metal-organic frameworks (MOFs) are used, including an amino group as the sensitive recognition center for NO2 molecules. The transfer of energy from the organic ligands to Ln is strongly dependent on the presence of NO2, resulting in an unprecedented photoluminescent sensing scheme. Thereby, NO2 exposition triggers either a reversible enhancement or a decrease in the luminescence intensity, depending on the lanthanide ion (Eu or Tb). Our experimental studies combined with density functional theory and complete active space self-consistent field calculations provide an understanding of the nature and effects of NO2 interactions within the MOFs and the signal transduction mechanism.

A near infrared light emitting electrochemical cell with a 2.3 V turn-on voltage.

We report on an organic electroluminescent device with simplified geometry and emission in the red to near infrared (NIR) spectral region which, has the lowest turn-on voltage value, 2.3 V, among light emitting electrochemical cells (LEECs). We have synthesized and characterized three novel ruthenium π-extended phenanthroimidazoles which differ on their N^N ligands. The use of dimethyl electron donating groups along with the π-extended phenanthroimidazole moiety promotes ambipolar transport thereby avoiding the use of additional charge transport layers. Furthermore, a facile cathode deposition method based on transfer of a molten alloy (Ga:In) on top of the active layer is deployed, thus avoiding high vacuum thermal deposition which adds versatile assets to our approach. We combine ambipolar charge transport organic complex design and a simple ambient cathode deposition to achieve a potentially cost effective red to NIR emitting device with outstanding performance, opening new avenues towards the development of simplified light emitting sources through device optimization.

Concurrent Optical Gain Optimization and Electrical Tuning in Novel Oligomer:Polymer Blends with Yellow-Green Laser Emission.

Electrically pumped organic lasing requires the integration of electrodes contact into the laser cavity in an organic light-emitting diode (OLED) or organic field effect transistor configuration to enable charge injection. Efficient and balanced carrier injection requires in turn alignment of the energy levels of the organic active layers with the Fermi levels of the cathode and anode. This can be achieved through chemical substitution with specific aromatic functional groups, although paying the price for a substantial (and often detrimental) change in the emission and light amplifying properties of the organic gain medium. Here, using host-guest energy transfer mixtures with hosts bearing a systematic and gradual shift in molecular orbitals is proposed, which reduces the amplified spontaneous emission (ASE) threshold of the organic gain medium significantly while leaving the peak emission unaffected. By virtue of the low guest doping required for complete host-to-guest energy transfer, the injection levels in the blends are attributed to the host whereas the gain properties solely depend on the guest. It is demonstrated that the ASE peak and thresholds of blends with different hosts do not differ while the current efficiency of OLEDs devices is deeply influenced by molecular orbital tuning of the hosts.

Hierarchical Uniform Supramolecular Conjugated Spherulites with Suppression of Defect Emission.

Easily processed, well-defined, and hierarchical uniform artificial architectures with intrinsic strong crystalline emission properties are necessary for a range of light-emitting optoelectronic devices. Herein, we designed and prepared ordered supramolecular spherulites, comprising planar conformational molecules as primary structures and multiple hydrogen bonds as physical cross-links. Compared with serious aggregation-induced fluorescence quenching (up to 70%), these highly ordered architectures exhibited unique and robust crystalline emission with a high PLQY of 55%, which was much higher than those of other terfluorenes. The primary reasons for the high PLQY are the uniform exciton energetic landscape created in the planar conformation and the highly ordered molecular packing in spherulite. Meanwhile, minimal residual defect (green-band) emissions are effectively suppressed in our oriented crystalline framework, whereas the strong and stable blue light radiations are promoted. These findings may confirm that supramolecular ordered artificial architectures may offer higher control and tunability for optoelectronic applications.