Diamond-Reinforced Al(H2PO4)3@Epoxy Hybrid Thermal Adhesive With Ultra-High Thermal Conductivity and Bonding Strength.

The miniaturization, integration, and increased power of electronic devices have exacerbated serious heat dissipation issues. Thermally conductive adhesives, which effectively transfer heat and firmly bond components, are critical for addressing these challenges. This paper innovatively proposed a composite comprising inorganic phosphate/alumina as a matrix and diamond as filler. The composite achieved an isotropic thermal conductivity (TC) of up to 18.96 W m-1 K-1, significantly surpassing existing reports while maintaining electrical insulation. First-principles calculations and experimental tests confirmed that the high TC of phosphate and excellent interface contact ensured efficient heat transfer. To optimize bonding performance, a modified-diamond/Al(H2PO4)3@epoxy hybrid composite is subsequently developed using an organic modification method. The unique hybrid structure, combining inorganic thermal pathways and an organic adhesive network, enabled the hybrid composite to simultaneously possess a high TC (3.23 W m-1 K-1) and strong adhesion (14.35 MPa). Compared to previous reports, the comprehensive performance of this hybrid thermally conductive adhesive is exceptionally remarkable. The superior heat dissipation capability of the hybrid thermal adhesive is demonstrated in chip cooling scenarios. This organic/inorganic hybrid approach offered a new direction for obtaining advanced thermal interface materials, demonstrating significant application potential in chip soldering, packaging, and heat dissipation.

Amide Proton Transfer-Weighted Imaging in Assessing the Aggressive and Proliferative Potential of Bladder Cancer.

BACKGROUND: Ki-67 and human epidermal growth factor receptor 2 (HER2) are known oncogenes involved in bladder cancer (BCa) patient risk stratification. Preoperative assessment of their expression level can assist in clinical treatment decision-making. Recently, amide proton transfer-weighted (APTw) MRI has shown promising potential in the diagnosis of several malignancies. However, few studies reported the value of APTw imaging in evaluating Ki-67 and HER2 status of BCa. PURPOSE: To investigate the feasibility of APTw MRI in assessing the aggressive and proliferative potential regarding the expression levels of Ki-67 and HER2 in BCa. STUDY TYPE: Retrospective. SUBJECTS: 114 patients (mean age, 64.78 ± 11.93 [SD] years; 97 men) were studied. FIELD STRENGTH/SEQUENCE: APTw MRI acquired by a three-dimensional fast-spin-echo sequence at 3.0 T MRI system. ASSESSMENT: Patient pathologic findings, included histologic grade and the expression status of Ki-67 and HER2, were reviewed by one uropathologist. The APTw values of BCa were independently measured by two radiologists and were compared between high-/low-tumor grade group, high-/low-Ki-67 expression group, and high-/low-HER2 expression group. STATISTICAL TESTS: The interclass correlation coefficient, independent sample t-test, Mann-Whitney U test, Spearman's rank correlation, and receiver operating characteristic curve (ROC) analysis were used. P < 0.05 was considered statistically significant. RESULTS: Significantly higher APTw values were found in high-grade BCa patients (7.72% vs. 4.29%, P < 0.001), high-Ki-67 expression BCa patients (8.40% vs. 3.25%, P < 0.001) and HER2 positive BCa patients (8.24% vs. 5.40%, P = 0.001). APTw values were positively correlated with Ki-67 (r = 0.769) and HER2 (r = 0. 356) expression status. The area under the ROC curve of the APTw values for detecting Ki-67 and HER2 expression status were 0.883 (95% CI: 0.790-0.945) and 0.713 (95% CI: 0.592-0.816), respectively. DATA CONCLUSIONS: APTw MRI is a potential method to assess the biological and proliferation potential of BCa. TECHNICAL EFFICACY: Stage 2.

Porous Organic Materials in Tissue Engineering: Recent Advances and Applications for Severed Facial Nerve Injury Repair.

The prevalence of facial nerve injury is substantial, and the restoration of its structure and function remains a significant challenge. Autologous nerve transplantation is a common treatment for severed facial nerve injury; however, it has great limitations. Therefore, there is an urgent need for clinical repair methods that can rival it. Tissue engineering nerve conduits are usually composed of scaffolds, cells and neurofactors. Tissue engineering is regarded as a promising method for facial nerve regeneration. Among different factors, the porous nerve conduit made of organic materials, which has high porosity and biocompatibility, plays an indispensable role. This review introduces facial nerve injury and the existing treatment methods and discusses the necessity of the application of porous nerve conduit. We focus on the application of porous organic polymer materials from production technology and material classification and summarize the necessity and research progress of these in repairing severed facial nerve injury, which is relatively rare in the existing articles. This review provides a theoretical basis for further research into and clinical interventions on facial nerve injury and has certain guiding significance for the development of new materials.

Novel function of a putative TaCOBL ortholog associated with cold response.

The plant COBRA protein family plays an important role in secondary cell wall biosynthesis and the orientation of cell expansion. The COBRA gene family has been well studied in Arabidopsis thaliana, maize, rice, etc., but no systematic studies were conducted in wheat. In this study, the full-length sequence of TaCOBLs was obtained by homology cloning from wheat, and a conserved motif analysis confirmed that TaCOBLs belonged to the COBRA protein family. qRT-PCR results showed that the TaCOBL transcripts were induced by abiotic stresses, including cold, drought, salinity, and abscisic acid (ABA). Two haplotypes of TaCOBL-5B (Hap5B-a and Hap5B-b), harboring one indel (----/TATA) in the 5' flanking region (- 550 bp), were found on chromosome 5BS. A co-dominant marker, Ta5BF/Ta5BR, was developed based on the polymorphism of the two TaCOBL-5B haplotypes. Significant correlations between the two TaCOBL-5B haplotypes and cold resistance were observed under four environmental conditions. Hap5B-a, a favored haplotype acquired during wheat polyploidization, may positively contribute to enhanced cold resistance in wheat. Based on the promoter activity analysis, the Hap5B-a promoter containing a TATA-box was more active than that of Hap5B-b without the TATA-box under low temperature. Our study provides valuable information indicating that the TaCOBL genes are associated with cold response in wheat.

Self-Healable and Reprocessable Silicon Elastomers Based on Imine-Boroxine Bonds for Flexible Strain Sensor.

Silicon elastomers with excellent self-healing and reprocessing abilities are highly desirable for the advancement of next-generation energy, electronic, and robotic applications. In this study, a dual cross-linked self-healing polysiloxane elastomer was facilely fabricated by introducing an exchangeable imine bond and boroxine into polydimethylsiloxane (PDMS) networks. The PDMS elastomers exhibited excellent self-healing properties due to the synergistic effect of dynamic reversible imine bonds and boroxine. After healing for 2 h, the mechanical strength of the damaged elastomers completely and rapidly recovered at room temperature. Furthermore, the prepared PDMS elastomers could be repeatedly reprocessed multiple times under milder conditions without significant degradation in mechanical performance. In addition, a stretchable and self-healable electrical sensor was developed by integrating carbon nanotubes (CNTs) with the PDMS elastomer, which can be employed to monitor multifarious human motions in real time. Therefore, this work provides a new inspiration for preparing self-healable and reprocessable silicone elastomers for future flexible electronics.

Inhibition of MSTN signal pathway may participate in LIPUS preventing bone loss in ovariectomized rats.

INTRODUCTION: Menopause can lead to osteoporosis, which is characterized by destruction of bone microstructure, poor mechanical properties, and prone to fracture. LIPUS can effectively promote bone formation and fracture healing. MSTN is a transforming growth factor-ß family member that acts as a negative regulator of skeletal muscle growth. A MSTN deficiency also has a positive effect on bone formation. However, whether LIPUS could inhibit bone loss and promote healing of bone injury of menopause through the inhibition of the MSTN signaling pathway has not been previously investigated. We herein investigated the effects of LIPUS on bone architecture, mechanical properties, the healing of bone defects, and its potential molecular mechanisms in ovariectomized rats. MATERIALS AND METHODS: The rats were randomly divided into three groups: sham ovariectomized group (Sham), ovariectomized model group (OVX), ovariectomized model with LIPUS therapy group (OVX + LIPUS). The OVX + LIPUS rats were treated with LIPUS (1.5 MHz, 30 mW/cm2) on the femur for 20 min/day that lasted for 19 days. RESULTS: LIPUS effectively improved the bone microstructure, increased mechanical properties and promoted the healing of bone defects in ovariectomized rats. Moreover, LIPUS effectively decreased the MSTN content in serum and quadriceps muscle in ovariectomized rats, and inhibited the expression of MSTN downstream signaling molecules and activated the Wnt signaling pathway in the femur. CONCLUSIONS: The present study shows that LIPUS improved osteoporosis and promoted bone defect healing in the ovariectomized rats may through the inhibition of the MSTN signal pathway.

Absorption behavior of poly(methyl methacrylate)-multiwalled carbon nanotube composites: effects of UV irradiation.

Understanding the effects of carbon nanotubes (CNTs) and ultraviolet (UV) irradiation on solvent transport in polymers is of practical importance for the applications of polymer-CNT composites in electronics and photonics. The transport behavior of methanol in poly(methyl methacrylate)-multiwalled carbon nanotube (PMMA-MWCNT) composites with and without UV light irradiation has been studied. The anomalous transport has been investigated as a function of the weight percentage of MWCNTs and UV dose in the temperature range of 30-50 °C. The anomalous transport consists of Case I (controlled by concentration gradient) and Case II (controlled by stress relaxation) transport; both UV irradiation and the addition of MWCNTs in PMMA enhance the transport of methanol. The activation energies for Case I and Case II transport decrease with the increase of UV dose for the PMMA-MWCNT plates with the same weight percentage of MWCNTs. Without UV irradiation, the activation energy for Case I transport of methanol decreases with the increase of the weight percentage of MWCNTs, and the activation energy for Case II transport increases with the increase of the weight percentage of MWCNTs.

Facile Preparation of a Transparent, Self-Healing, and Recyclable Polysiloxane Elastomer Based on a Dynamic Imine and Boroxine Bond.

Transparent polysiloxane elastomers with good self-healing and reprocessing abilities have attracted significant attention in the field of artificial skin and flexible displays. Herein, we propose a simple one-pot method to fabricate a room temperature self-healable polysiloxane elastomer (HPDMS) by introducing dynamic and reversible imine bonds and boroxine into polydimethylsiloxane (PDMS) networks. The presence of imine bonds and boroxine is proved by FT-IR and NMR spectra. The obtained HPDMS elastomer is highly transparent with a transmittance of up to 80%. The TGA results demonstrated that the HPDMS elastomer has good heat resistance and can be used in a wide temperature range. A lower glass transition temperature (Tg, -127.4 °C) was obtained and revealed that the elastomer is highly flexible at room temperature. Because of the reformation of dynamic reversible imine bonds and boroxine, the HPDMS elastomers exhibited excellent autonomous self-healing properties. After healing for 3 h, the self-healing efficiency of HPDMS reached 96.3% at room temperature. Moreover, the elastomers can be repeatedly reprocessed multiple times under milder conditions. This work provides a simple but effective method to prepare transparent self-healable and reprocessable polysiloxane elastomers.

Phosphorylation of INF2 by AMPK promotes mitochondrial fission and oncogenic function in endometrial cancer.

Mitochondria are highly dynamic organelles capable of altering their sizes and shapes to maintain metabolic balance through coordinated fission and fusion processes. In various cancer types, mitochondrial hyperfragmentation has been frequently observed, contributing to the progression of cancer toward metastasis. Inverted formin 2 (INF2), which resides in the endoplasmic reticulum (ER), has been found to accelerate actin polymerization and drive mitochondrial fission. In this study, we demonstrate that INF2 expression is significantly upregulated in endometrial cancer (EC) and is associated with a poor prognosis in EC patients. INF2 promotes anchorage-dependent and independent EC cell growth in part by facilitating mitochondrial fission. Furthermore, in conditions of energy stress, AMP-activated protein kinase (AMPK) phosphorylates INF2 at Ser1077, leading to increased localization of INF2 to the ER and enhanced recruitment of the dynamin-related protein 1 (DRP1) to mitochondria. This AMPK-mediated phosphorylation of INF2 at Ser1077 facilitates mitochondrial division and promotes EC cell growth. Pathological examination using immunohistochemical analyses revealed a positive correlation between AMPK activity and phosphorylated INF2 (Ser1077) in EC specimens. Collectively, our findings uncover novel molecular mechanisms involving the AMPK-INF2 axis, which regulates mitochondrial dynamics and malignant cell growth in EC.

The appearance of cytoplasmic cytochrome C precedes apoptosis during Drosophila salivary gland degradation.

Apoptosis is an important process for organism development that functions to eliminate cell damage, maintain homeostasis, and remove obsolete tissues during morphogenesis. In mammals, apoptosis is accompanied by the release of cytochrome C (Cyt-c) from mitochondria to the cytoplasm. However, whether this process is conserved in the fruit fly, Drosophila melanogaster, remains controversial. In this study, we discovered that during the degradation of Drosophila salivary gland, the transcription of mitochondria apoptosis factors (MAPFs), Cyt-c, and death-associated APAF1-related killer (Dark) encoding genes are all upregulated antecedent to initiator and effector caspases encoding genes. The proteins Cyt-c and the active caspase 3 appear gradually in the cytoplasm during salivary gland degradation. Meanwhile, the Cyt-c protein colocates with mito-GFP, the marker indicating cytoplasmic mitochondria, and the change in mitochondrial membrane potential coincides with the appearance of Cyt-c in the cytoplasm. Moreover, impeding or promoting 20E-induced transcription factor E93 suppresses or enhances the staining of Cyt-c and the active caspase 3 in the cytoplasm of salivary gland, and accordingly decreases or increases the mitochondrial membrane potential, respectively. Our research provides evidence that cytoplasmic Cyt-c appears before apoptosis during Drosophila salivary gland degradation, shedding light on partial conserved mechanism in apoptosis between insects and mammals.

Amide Proton Transfer-Weighted MRI and Diffusion-Weighted Imaging in Bladder Cancer: A Complementary Tool to the VI-RADS.

RATIONALE AND OBJECTIVES: To investigate the feasibility of amide proton transfer-weighted (APTw) and diffusion-weighted Magnetic Resonance Imaging (MRI) as a means by which to add value to the Vesical Imaging Reporting and Data System (VI-RADS) for discriminating muscle invasive bladder cancer (MIBC) from nonmuscle invasive bladder cancer (NMIBC). MATERIALS AND METHODS: This prospective study enrolled participants with pathologically confirmed bladder cancer (BCa) who underwent preoperative multiparametric MRI, including APTw and diffusion-weighted MRI, from July 2020 to January 2023. The exclusion criteria were lesions smaller than 10 mm, missing smooth muscle layer in the operation specimen, neoadjuvant therapy before MRI, inadequate image quality, and malignancy other than urothelial neoplasm. Two radiologists independently assigned the VI-RADS score for each participant. Quantitative parameters derived from APTw and diffusion-weighted MRI were obtained by another two radiologists. Receiver operating characteristic (ROC) curve analysis with the area under the ROC curve (AUC) was performed to evaluate the diagnostic performances of quantitative parameters for discriminating BCa detrusor muscle invasion status. RESULTS: A total of 106 participants were enrolled (mean age, 64 ± 12 years [SD]; 90 men): 32 with MIBC and 74 with NMIBC. Lower apparent diffusion coefficient (ADC) values (0.88 × 10-3 mm2/s ± 0.12 vs. 1.08 × 10-3 mm2/s ± 0.25; P < 0.001) and higher APTw values (6.89% [interquartile range {IQR}, 5.05%-12.17%] vs. 3.61% [IQR, 2.23%-6.83%]; P < 0.001) were observed in the MIBC group. Compared to VI-RADS alone, both APTw (P = 0.003) and ADC (P = 0.020) values could improve the diagnostic performance of VI-RADS in differentiating MIBC from NMIBC. The combination of the three yielded the highest diagnostic performance (AUC, 0.93; 95% CI:0.87,0.97) for evaluating muscle invasion status. The addition of the APTw values to the combination of VI-RADS and ADC values notably improved the diagnostic performance for differentiating NMIBC from MIBC (VI-RADS+ADC vs. VI-RADS+APTw+ADC, P = 0.046). CONCLUSION: MRI parameters derived from APTw and diffusion-weighted MRI can be used to accurately assess muscle invasion status in BCa and provide additional value to VI-RADS.

Graphene/ chitosan tubes inoculated with dental pulp stem cells promotes repair of facial nerve injury.

Introduction: Facial nerve injury significantly impacts both the physical and psychological] wellbeing of patients. Despite advancements, there are still limitations associated with autografts transplantation. Consequently, there is an urgent need for effective artificial grafts to address these limitations and repair injuries. Recent years have witnessed the recognition of the beneficial effects of chitosan (CS) and graphene in the realm of nerve repair. Dental pulp stem cells (DPSCs) hold great promise due to their high proliferative and multi-directional differentiation capabilities. Methods: In this study, Graphene/CS (G/CST) composite tubes were synthesized and their physical, chemical and biological properties were evaluated, then DPSCs were employed as seed cells and G/CST as a scaffold to investigate their combined effect on promoting facial nerve injury repair. Results and Disscussion: The experimental results indicate that G/CST possesses favorable physical and chemical properties, along with good cyto-compatibility. making it suitable for repairing facial nerve transection injuries. Furthermore, the synergistic application of G/CST and DPSCs significantly enhanced the repair process for a 10 mm facial nerve defect in rabbits, highlighting the efficacy of graphene as a reinforcement material and DPSCs as a functional material in facial nerve injury repair. This approach offers an effective treatment strategy and introduces a novel concept for clinically managing facial nerve injuries.

Multiparametric MR characterization for human epithelial growth factor receptor 2 expression in bladder cancer: an exploratory study.

PURPOSE: To investigate the application value of multiparametric MRI in evaluating the expression status of human epithelial growth factor receptor 2 (HER2) in bladder cancer (BCa). METHODS: From April 2021 to July 2023, preoperative imaging manifestations of 90 patients with pathologically confirmed BCa were retrospectively collected and analyzed. All patients underwent multiparametric MRI including synthetic MRI, DWI, from which the T1, T2, proton density (PD) and apparent diffusion coefficient (ADC) values were obtained. The clinical and imaging characteristics as well as quantitative parameters (T1, T2, PD and ADC values) between HER2-positive and -negative BCa were compared using student t test and chi-square test. The diagnostic efficacy of parameters in predicting HER2 expression status was evaluated by calculating the area under ROC curve (AUC). RESULTS: In total, 76 patients (mean age, 63.59 years ± 12.84 [SD]; 55 men) were included: 51 with HER2-negative and 25 with HER2-positive BCa. HER2-positive group demonstrated significantly higher ADC, T1, and T2 values than HER2-negative group (all P < 0.05). The combination of ADC values and tumor grade yielded the best diagnostic performance in evaluating HER2 expression level with an AUC of 0.864. CONCLUSION: The multiparametric MR characterization can accurately evaluate the HER2 expression status in BCa, which may further guide the determination of individualized anti-HER2 targeted therapy strategies.

Histogram analysis of MR quantitative parameters: are they correlated with prognostic factors in prostate cancer?

PURPOSE: To investigate the correlation between quantitative MR parameters and prognostic factors in prostate cancer (PCa). METHOD: A total of 186 patients with pathologically confirmed PCa who underwent preoperative multiparametric MRI (mpMRI), including synthetic MRI (SyMRI), were enrolled from two medical centers. The histogram metrics of SyMRI [T1, T2, proton density (PD)] and apparent diffusion coefficient (ADC) values were extracted. The Mann‒Whitney U test or Student's t test was employed to determine the association between these histogram features and the prognostically relevant factors. Receiver operating characteristic (ROC) curve analysis was conducted to evaluate the differentiation performance. Spearman's rank correlation coefficients were calculated to determine the correlations between histogram parameters and the International Society of Urological Pathology (ISUP) grade group as well as pathological T stage. RESULTS: Significant correlations were found between the histogram parameters and the ISUP grade as well as pathological T stage of PCa. Among these histogram parameters, ADC_minimum had the strongest correlation with the ISUP grade (r = - 0.481, p < 0.001), and ADC_Median showed the strongest association with pathological T stage (r = - 0.285, p = 0.008). The ADC_10th percentile exhibited the highest performance in identifying clinically significant prostate cancer (csPCa) (AUC 0.833; 95% CI 0.771-0.883). When discriminating between the status of different prognostically relevant factors, a significant difference was observed between extraprostatic extension-positive and -negative cancers with regard to histogram parameters of the ADC map (10th percentile, 90th percentile, mean, median, minimum) and T1 map (minimum) (p = 0.002-0.032). Moreover, histogram parameters of the ADC map (90th percentile, maximum, mean, median), T2 map (10th percentile, median), and PD map (10th percentile, median) were significantly lower in PCa with perineural invasion (p = 0.009-0.049). The T2 values were significantly lower in patients with seminal vesicle invasion (minimum, p = 0.036) and positive surgical margin (10th percentile, 90th percentile, mean, median, and minimum, p = 0.015-0.025). CONCLUSION: Quantitative histogram parameters derived from synthetic MRI and ADC maps may have great potential for predicting the prognostic features of PCa.

Seaweed-inspired underwater anti-oil-fouling and anti-fogging coating with mechanical durability.

Ecofriendly fabrication of anti-oil-fouling materials is of interest. Surfaces with underwater superoleophobicity have been fabricated which exhibit limited mechanical durability and water resistance. In this study, we report on a bioinspired bilayer design of a transparent anti-oil-fouling coating. Seaweed surfaces show anti-oil-fouling in the sea due to its high surface hydration ability. Mussels can adhere tightly onto a surface with good stability in the sea by virtue of its levodopa-containing secretions. The surface layer was fabricated using a crosslinked combination of carboxymethyl cellulose (CMC) and sodium alginate (AlgS) inspired by seaweed, with the addition of calcium ions. Polydopamine (PDA), a derivative of levodopa, was used as the underlayer to enhance bonding strength and water resistance. Oil that adhered to the coated surface was spontaneously detached upon immersion in water. The mechanism underlying this anti-oil-fouling effect was elucidated using Gibbs free energy theory. The coating exhibited mechanical durability and water resistance. The coating is transparent and preserves the original color of the substrate. The coated glass showed stable anti-fogging and anti-frost performance. These coatings hold promise for a wide range of anti-oil-fouling applications.

Radiomics nomogram for predicting disease-free survival after partial resection or radical cystectomy in patients with bladder cancer.

OBJECTIVES: To create a MRI-derived radiomics nomogram that combined clinicopathological factors and radiomics signature (Rad-score) for predicting disease-free survival (DFS) in patients with bladder cancer (BCa) following partial resection (PR) or radical cystectomy (RC), including lymphadenectomy (LAE). METHODS: Finally, 80 patients with BCa after PR or RC with LAE were enrolled. Patients were randomly split into training (n = 56) and internal validation (n = 24) cohorts. Radiomic features were extracted from T2-weighted, dynamic contrast-enhanced, diffusion-weighted imaging, and apparent diffusion coefficient sequence. The least absolute shrinkage and selection operator (LASSO) Cox regression algorithm was applied to choose the valuable features and construct the Rad-score. The DFS prediction model was built using the Cox proportional hazards model. The relationship between the Rad-score and DFS was assessed using Kaplan-Meier analysis. A radiomics nomogram that combined the Rad-score and clinicopathological factors was created for individualized DFS estimation. RESULTS: In both the training and validation cohorts, the Rad-score was positively correlated with DFS (P < .001). In the validation cohort, the radiomics nomogram combining the Rad-score, tumour pathologic stage (pT stage), and lymphovascular invasion (LVI) achieved better performance in DFS prediction (C-index, 0.807; 95% CI, 0.713-0.901) than either the clinicopathological (C-index, 0.654; 95% CI, 0.467-0.841) or Rad-score-only model (C-index, 0.770; 95% CI, 0.702-0.837). CONCLUSION: The Rad-score was an independent predictor of DFS for patients with BCa after PR or RC with LAE, and the radiomics nomogram that combined the Rad-score, pT stage, and LVI achieved better performance in individual DFS prediction. ADVANCES IN KNOWLEDGE: This study provided a non-invasive and simple method for personalized and accurate prediction of DFS in BCa patients after PR or RC.

Strong, Tough, and Biocompatible Poly(vinyl alcohol)-Poly(vinylpyrrolidone) Multiscale Network Hydrogels Reinforced by Aramid Nanofibers.

Poly(vinyl alcohol) (PVA) hydrogels are water-rich, three-dimensional (3D) network materials that are similar to the tissue structure of living organisms. This feature gives hydrogels a wide range of potential applications, including drug delivery systems, articular cartilage regeneration, and tissue engineering. Due to the large amount of water contained in hydrogels, achieving hydrogels with comprehensive properties remains a major challenge, especially for isotropic hydrogels. This study innovatively prepares a multiscale-reinforced PVA hydrogel from molecular-level coupling to nanoscale enhancement by chemically cross-linking poly(vinylpyrrolidone) (PVP) and in situ assembled aromatic polyamide nanofibers (ANFs). The optimized ANFs-PVA-PVP (APP) hydrogels have a tensile strength of ≈9.7 MPa, an elongation at break of ≈585%, a toughness of ≈31.84 MJ/m3, a compressive strength of ≈10.6 MPa, and a high-water content of ≈80%. It is excellent among all reported PVA hydrogels and even comparable to some anisotropic hydrogels. System characterizations show that those performances are attributed to the particular multiscale load-bearing structure and multiple interactions between ANFs and PVA. Moreover, APP hydrogels exhibit excellent biocompatibility and a low friction coefficient (≈0.4). These valuable performances pave the way for broad potential in many advanced applications such as biological tissue replacement, flexible wearable devices, electronic skin, and in vivo sensors.

Cellulose Nanostructures as Tunable Substrates for Nanocellulose-Metal Hybrid Flexible Composites.

Nanocomposite represents the backbone of many industrial fabrication applications and exerts a substantial social impact. Among these composites, metal nanostructures are often employed as the active constituents, thanks to their various chemical and physical properties, which offer the ability to tune the application scenarios in thermal management, energy storage, and biostable materials, respectively. Nanocellulose, as an emerging polymer substrate, possesses unique properties of abundance, mechanical flexibility, environmental friendliness, and biocompatibility. Based on the combination of flexible nanocellulose with specific metal fillers, the essential parameters involving mechanical strength, flexibility, anisotropic thermal resistance, and conductivity can be enhanced. Nowadays, the approach has found extensive applications in thermal management, energy storage, biostable electronic materials, and piezoelectric devices. Therefore, it is essential to thoroughly correlate cellulose nanocomposites' properties with different metallic fillers. This review summarizes the extraction of nanocellulose and preparation of metal modified cellulose nanocomposites, including their wide and particular applications in modern advanced devices. Moreover, we also discuss the challenges in the synthesis, the emerging designs, and unique structures, promising directions for future research. We wish this review can give a valuable overview of the unique combination and inspire the research directions of the multifunctional nanocomposites using proper cellulose and metallic fillers.

Origami metamaterials for ultra-wideband and large-depth reflection modulation.

The dynamic control of electromagnetic waves is a persistent pursuit in modern industrial development. The state-of-the-art dynamic devices suffer from limitations such as narrow bandwidth, limited modulation range, and expensive features. To address these issues, we fuse origami techniques with metamaterial design to achieve ultra-wideband and large-depth reflection modulation. Through a folding process, our proposed metamaterial achieves over 10-dB modulation depth over 4.96 - 38.8 GHz, with a fractional bandwidth of 155% and tolerance to incident angles and polarizations. Its ultra-wideband and large-depth reflection modulation performance is verified through experiments and analyzed through multipole decomposition theory. To enhance its practical applicability, transparent conductive films are introduced to the metamaterial, achieving high optical transparency (>87%) from visible to near-infrared light while maintaining cost-effectiveness. Benefiting from lightweight, foldability, and low-cost properties, our design shows promise for extensive satellite communication and optical window mobile communication management.

SPOP mutations promote tumor immune escape in endometrial cancer via the IRF1-PD-L1 axis.

Blockade of programmed cell death 1 (PD-1)/programmed cell death 1 ligand (PD-L1) has evolved into one of the most promising immunotherapy strategies for cancer patients. Tumor cells frequently overexpress PD-L1 to evade T cell-mediated immune surveillance. However, the specific genetic alterations that drive aberrant overexpression of PD-L1 in cancer cells remain poorly understood. The gene encoding the E3 ubiquitin ligase substrate-binding adaptor SPOP is frequently mutated in endometrial cancer (EC). Here, we report that SPOP negatively regulates PD-L1 expression at the transcriptional level. Wild-type SPOP binds to IRF1, a primary transcription factor responsible for the inducible expression of PD-L1, and subsequently triggers its ubiquitin- proteasomal degradation to suppress IRF1-mediated transcriptional upregulation of PD-L1. In contrast, EC-associated SPOP mutants lose their capacity to degrade IRF1 but stabilize IRF1, and upregulate PD-L1 expression. EC-associated SPOP mutations accelerate xenograft tumor growth partially by increasing IRF1 and PD-L1 expression. Together, we identify SPOP as a negative regulator of the IRF1-PD-L1 axis and characterize the critical roles of IRF1 and PD-L1 in SPOP mutation-driven tumor immune evasion in EC.