Advances in high-throughput, high-capacity nonwoven membranes for chromatography in downstream processing: A review.

Nonwoven membranes are highly engineered fibrous materials that can be manufactured on a large scale from a wide range of different polymers, and their surfaces can be modified using a large variety of different chemistries and ligands. The fiber diameters, surface areas, pore sizes, total porosities, and thicknesses of the nonwoven mats can be carefully controlled, providing many opportunities for creative approaches for the development of novel membranes with unique properties to meet the needs of the future of downstream processing. Fibrous membranes are already finding use in ultrafiltration, microfiltration, depth filtration, and, more recently, in membrane chromatography for product capture and impurity removal. This article summarizes the various methods of manufacturing nonwoven fabrics, and the many methods available for the modification of the fiber surfaces. It also reviews recent studies focused on the use of nonwoven fabric devices in membrane chromatography and provides some perspectives on the challenges that need to be overcome to increase binding capacities, decrease residence times, and reduce pressure drops so that eventually they can replace resin column chromatography in downstream process operations.

Towards continuous mAb purification: Clearance of host cell proteins from CHO cell culture harvests via "flow-through affinity chromatography" using peptide-based adsorbents.

The growth of advanced analytics in manufacturing monoclonal antibodies (mAbs) has highlighted the challenges associated with the clearance of host cell proteins (HCPs). Of special concern is the removal of "persistent" HCPs, including immunogenic and mAb-degrading proteins, that co-elute from the Protein A resin and can escape the polishing steps. Responding to this challenge, we introduced an ensemble of peptide ligands that target the HCPs in Chinese hamster ovary (CHO) cell culture fluids and enable mAb purification via flow-through affinity chromatography. This study describes their integration into LigaGuard™, an affinity adsorbent featuring an equilibrium binding capacity of ~30 mg of HCPs per mL of resin as well as dynamic capacities up to 16 and 22 mg/ml at 1- and 2-min residence times, respectively. When evaluated against cell culture harvests with different mAb and HCP titers and properties, LigaGuard™ afforded high HCP clearance, with logarithmic removal values (LRVs) up to 1.5, and mAb yield above 90%. Proteomic analysis of the effluents confirmed the removal of high-risk HCPs, including cathepsins, histones, glutathione-S transferase, and lipoprotein lipases. Finally, combining LigaGuard™ for HCP removal with affinity adsorbents for product capture afforded a global mAb yield of 85%, and HCP and DNA LRVs > 4.

Biomanufacturing readiness levels [BRL]-A shared vocabulary for biopharmaceutical technology development and commercialization.

The Manufacturing Readiness Levels (MRLs) developed by the Department of Defense are well-established tools for describing the maturity of new technologies resulting from government-sponsored Research and Development programs, from the concept phase to commercial deployment. While MRLs are generally applicable to a wide range of industries and technologies, there is significant value in offering an industry-specific view on how the basic principles may be applied to biomanufacturing. This paper describes Biomanufacturing Readiness Levels (BRLs) developed by the National Institute for Innovation in Manufacturing Biopharmaceuticals (NIIMBL), a public/private partnership that is part of the Manufacturing USA network. NIIMBL brings together private, federal, nonprofit, and academic stakeholders to accelerate the deployment of innovative technologies for biopharmaceutical production and to educate and train a world-leading biomanufacturing workforce. We anticipate that these BRLs will lay the groundwork for a shared vocabulary for assessment of technology maturity and readiness for commercial biomanufacturing that effectively meets the needs of this critical, specialized, and highly regulated industry.

Use of a Branched Linker for Enhanced Biosensing Properties in IgG Detection from Mixed Chinese Hamster Ovary Cell Cultures.

Tris(2-aminoethyl)-amine (TREN), a branched amine, was coupled to planar surfaces of alkanethiol self-assembled monolayers (SAMs) to increase the grafting density of IgG-binding peptide (HWRGWV or HWRGWVG) on gold surfaces. One of the three primary amine pendant groups of TREN anchors onto the SAM, while the other two are available for grafting with the C-termini of the peptide. The ellipsometric peptide density on the SAM-branched amine was 1.24 molecules nm-2. The surfaces carrying the peptides were investigated via surface plasmon resonance (SPR) to quantify the adsorption of IgG and showed maximum binding capacity, Qm of 4.45 mg m-2, and dissociation constant, Kd of 8.7 × 10-7 M. Real-time dynamic adsorption data was used to determine adsorption rate constants, ka values, and the values were dependent on IgG concentration. IgG binding from complex mixtures of Chinese hamster ovary supernatant (CHO) was investigated and regeneration studies were carried out. Compared to the unbranched amine-based surfaces, the branched amines increased the overall sensitivity and selectivity for IgG adsorption from complex mixtures. Regeneration of the branched amine-based surfaces was achieved with 0.1 M NaOH, with less than 10% decline in peptide activity after 12 cycles of regeneration-binding.

Multiplexed Competitive Screening of One-Bead-One-Component Combinatorial Libraries Using a ClonePix 2 Colony Sorter.

Screening solid-phase combinatorial libraries of bioactive compounds against fluorescently labeled target biomolecules is an established technology in ligand and drug discovery. Rarely, however, do screening methods include comprehensive strategies-beyond mere library blocking and competitive screening-to ensure binding selectivity of selected leads. This work presents a method for multiplexed solid-phase peptide library screening using a ClonePix 2 Colony Picker that integrates (i) orthogonal fluorescent labeling for positive selection against a target protein and negative selection against competitor species with (ii) semi-quantitative tracking of target vs. competitor binding for every library bead. The ClonePix 2 technology enables global at-a-glance evaluation and customization of the parameters for bead selection to ensure high affinity and selectivity of the isolated leads. A case study is presented by screening a peptide library against green-labeled human immunoglobulin G (IgG) and red-labeled host cell proteins (HCPs) using ClonePix 2 to select HCP-binding ligands for flow-through chromatography applications. Using this approach, 79 peptide ligand candidates (6.6% of the total number of ligands screened) were identified as potential HCP-selective ligands, enabling a potential rate of >3,000 library beads screened per hour.

Optimization of Sequence, Display, and Mode of Operation of IgG-Binding Peptide Ligands to Develop Robust, High-Capacity Affinity Adsorbents That Afford High IgG Product Quality.

This work presents the use of peptide ligand HWRGWV and its cognate sequences to develop affinity adsorbents that compete with Protein A in terms of binding capacity and quality of the eluted product. First, the peptide ligand was conjugated to crosslinked agarose resins (WorkBeads) at different densities and using different spacer arms. The optimization of ligand density and display resulted in values of static and dynamic binding capacity of 85 mg/mL and 65 mg/mL, respectively. A selected peptide-WorkBeads adsorbent was utilized for purifying Mabs from Chinese Hamster Ovary (CHO) cell culture supernatants. The peptide-WorkBeads adsorbent was found able to withstand sanitization with strong alkaline solutions (0.5 M NaOH). The purity of the eluted product was consistently higher than 95%, with logarithmic removal value (LRV) of 1.5 for host cell proteins (HCPs) and 4.0 for DNA. HCP clearance was significantly improved by adding a post-load washing step with either 0.1 M Tris HCl pH 9 or 1 M NaCl. The cognate peptide of HWRGWV, constructed by replacing arginine (R) with citrulline, further increased the HCP LRV to 2.15. The peptide-based adsorbent also showed a remarkable performance in terms of removal of Mab aggregates; unlike Protein A, in fact, HWRGWV was found to bind only monomeric IgG. Collectively, these results demonstrate the potential of peptide-based adsorbents as alternative to Protein A for the purification of therapeutic antibodies.

Targeted Capture of Chinese Hamster Ovary Host Cell Proteins: Peptide Ligand Discovery.

The growing integration of quality-by-design (QbD) concepts in biomanufacturing calls for a detailed and quantitative knowledge of the profile of impurities and their impact on the product safety and efficacy. Particularly valuable is the determination of the residual level of host cell proteins (HCPs) secreted, together with the product of interest, by the recombinant cells utilized for production. Though often referred to as a single impurity, HCPs comprise a variety of species with diverse abundance, size, function, and composition. The clearance of these impurities is a complex issue due to their cell line to cell line, product-to-product, and batch-to-batch variations. Improvements in HCP monitoring through proteomic-based methods have led to identification of a subset of "problematic" HCPs that are particularly challenging to remove, both at the product capture and product polishing steps, and compromise product stability and safety even at trace concentrations. This paper describes the development of synthetic peptide ligands capable of capturing a broad spectrum of Chinese hamster ovary (CHO) HCPs with a combination of peptide species that allow for advanced mixed-mode binding. Solid phase peptide libraries were screened for identification and characterization of peptides that capture CHO HCPs while showing minimal binding of human IgG, utilized here as a model product. Tetrameric and hexameric ligands featuring either multipolar or hydrophobic/positive amino acid compositions were found to be the most effective. Tetrameric multipolar ligands exhibited the highest targeted binding ratio (ratio of HCP clearance over IgG loss), more than double that of commercial mixed-mode and anion exchange resins utilized by industry for IgG polishing. All peptide resins tested showed preferential binding to HCPs compared to IgG, indicating potential uses in flow-through mode or weak-partitioning-mode chromatography.

Affinity interactions of human immunoglobulin G with short peptides: role of ligand spacer on binding, kinetics, and mass transfer.

The interaction affinity between human IgG and a short peptide ligand (hexameric HWRGWV) was investigated by following the shifts in frequency and energy dissipation in a quartz crystal microbalance (QCM). HWRGWV was immobilized by means of poly(ethylene glycol) tethered on QCM sensors coated with silicon oxide, which enhanced the accessibility of the peptide to hIgG and also passivated the surface. Ellipsometry and ToF-SIMS were employed for surface characterization. The peptide ligand density was optimized to 0.88 chains nm(-2), which enabled the interaction of each hIgG molecule with at least one ligand. The maximum binding capacity was found to be 4.6 mg m(-2), corresponding to a monolayer of hIgG, similar to the values for chromatographic resins. Dissociation constants were lower than those obtained from resins, possibly due to overestimation of bound mass by QCM. Equilibrium thermodynamic and kinetic parameters were determined, shedding light on interfacial effects important for detection and bioseparation. Graphical Abstract The interaction affinity between human IgG and a short peptide ligand was investigated by using quartz crystal microgravimetry, ellipsometry and ToF-SIMS. Equilibrium thermodynamic and kinetics parameters were determined, shedding light on interfacial effects important for detection and bioseparation.

Novel multimodal cation-exchange membrane for the purification of a single-chain variable fragment from Pichia pastoris supernatant.

A novel salt-tolerant cation-exchange membrane, prepared with a multimodal ligand, 2-mercaptopyridine-3-carboxylic acid (MMC-MPCA), was examined for its purification properties in a bind-and-elute mode from the high conductivity supernatant of a Pichia pastoris fermentation producing and secreting a single-chain variable fragment (scFv). If successful, this approach would eliminate the need for a buffer exchange prior to product capture by ion-exchange. Two fed-batch fermentations of Pichia pastoris resulted in fermentation supernatants reaching an scFv titer of 395.0 mg/L and 555.7 mg/L, both with a purity of approximately 83 %. The MMC-MPCA membrane performance was characterized in terms of pH, residence time (RT), scFv load, and scFv concentration to identify the resulting dynamic binding capacity (DBC), yield, and purity achieved under optimal conditions. The MMC-MPCA membrane exhibited the highest DBC of 39.06 mg/mL at pH 5.5, with a residence time of 1 min, while reducing the pH below 5.0 resulted in a significant decrease of the DBC to around 2.5 mg/mL. With almost no diffusional limitations, reducing the RT from 2 to 0.2 min did not negatively impact the DBC of the MMC-MPCA membrane, resulting in a significant improvement in productivity of up to 180 mg/mL/min at 0.2 min RT. Membrane fouling was observed when reusing the membranes at 0.2 and 0.5 min RT, likely due to the enhanced adsorption of impurities on the membrane. Changing the amount of scFv loaded onto the membrane column did not show any changes in yield, instead a 10-20 % loss of scFv was observed, which suggested that some of the produced scFv were fragmented or had aggregated. When performing the purification under the optimized conditions, the resulting purity of the product improved from 83 % to approximately 92-95 %.

Specific binding of immunoglobulin G with bioactive short peptides supported on antifouling copolymer layers for detection in quartz crystal microgravimetry and surface plasmon resonance.

A new peptide-based system supported on copolymer brushes grafted from gold sensors and with resistance to nonspecific adsorption is reported for selective binding of human immunoglobulin G (IgG). A random copolymer rich in primary amines, poly(2-aminoethyl methacrylate hydrochloride-co-2-hydroxyethyl methacrylate) (poly(AMA-co-HEMA)) was first grafted from initiator-coated gold substrates via activators regenerated by electron transfer-atom transfer radical polymerization (ARGET-ATRP), followed by immobilization of acetylated-HWRGWVA peptide, which has specific binding affinity with IgG. The peptide ligands covalently linked to the soft copolymer layer were characterized by X-ray photoelectron spectroscopy (XPS), water contact angle, ellipsometry, and atomic force microscopy (AFM). The extent of binding, binding affinity, and selectivity for target IgG molecules as well as the capability to minimize nonspecific interactions with other proteins were examined by fluorescence imaging, surface plasmon resonance (SPR), and quartz crystal microgravimetry (QCM). The effect of copolymer molecular composition and analyte concentration was elucidated in order to design systems based on immobilized peptides for high signal-to-noise response and detection limits that meet the requirements for IgG biosensing in fluid matrixes.

mRNA display selection and solid-phase synthesis of Fc-binding cyclic peptide affinity ligands.

Cyclic peptides are attractive candidates for synthetic affinity ligands due to their favorable properties, such as resistance to proteolysis, and higher affinity and specificity relative to linear peptides. Here we describe the discovery, synthesis and characterization of novel cyclic peptide affinity ligands that bind the Fc portion of human Immunoglobulin G (IgG; hFc). We generated an mRNA display library of cyclic pentapeptides wherein peptide cyclization was achieved with high yield and selectivity, using a solid-phase crosslinking reaction between two primary amine groups, mediated by a homobifunctional linker. Subsequently, a pool of cyclic peptide binders to hFc was isolated from this library and chromatographic resins incorporating the selected cyclic peptides were prepared by on-resin solid-phase peptide synthesis and cyclization. Significantly, this approach results in resins that are resistant to harsh basic conditions of column cleaning and regeneration. Further studies identified a specific cyclic peptide--cyclo[Link-M-WFRHY-K]--as a robust affinity ligand for purification of IgG from complex mixtures. The cyclo[Link-M-WFRHY-K] resin bound selectively to the Fc fragment of IgG, with no binding to the Fab fragment, and also bound immunoglobulins from a variety of mammalian species. Notably, while the recovery of IgG using the cyclo[Link-M-WFRHY-K] resin was comparable to a Protein A resin, elution of IgG could be achieved under milder conditions (pH 4 vs. pH 2.5). Thus, cyclo[Link-M-WFRHY-K] is an attractive candidate for developing a cost-effective and robust chromatographic resin to purify monoclonal antibodies (mAbs). Finally, our approach can be extended to efficiently generate and evaluate cyclic peptide affinity ligands for other targets of interest.

Bioactive cellulose nanofibrils for specific human IgG binding.

Bioactive films were produced by conjugation of a short peptide onto modified cellulose nanofibrils (CNF). Specifically, a hydrophilic copolymer, poly(2-aminoethyl methacrylate hydrochloride-co-2-hydroxyethylmethacrylate) (poly(AMA-co-HEMA)), was grafted via surface initiated polymerization from an initiator coupled to CNF. The poly(AMA-co-HEMA) was used as a spacer and support layer for immobilization of the peptide, acetylated-HWRGWVA, which has specific affinity with human immunoglobulin G (hIgG). Two methods for peptide grafting were compared: modification of CNF in aqueous suspension followed by assembly into a bioactive film and peptide grafting on a preformed CNF film. The CNF-based networks were examined on solid supports via atomic force microscopy (AFM) and extreme resolution imaging with ultralow electron landing energies (scanning low energy electron microscopy). The specific binding capability of hIgG and nonspecific protein resistance of the resultant peptide-modified CNF were evaluated by using quartz crystal microgravimetry (QCM). The effects of initiator concentration and thickness of poly(AMA-co-HEMA) layer on hIgG adsorption were investigated in the developed systems, which exhibited high signal-to-noise response.

Development of peptide affinity ligands for the purification of polyclonal and monoclonal Fabs from recombinant fluids.

Engineered multi-specific monoclonal antibodies (msAbs) and antibody fragments offer valuable therapeutic options against metabolic disorders, aggressive cancers, and viral infections. The advancement in molecular design and recombinant expression of these next-generation drugs, however, is not equaled by the progress in downstream bioprocess technology. The purification of msAbs and fragments requires affinity adsorbents with orthogonal biorecognition of different portions of the antibody structure, namely its Fc (fragment crystallizable) and Fab (fragment antigen-binding) regions or the CH1-3 and CL chains. Current adsorbents rely on protein ligands that, while featuring high binding capacity and selectivity, need harsh elution conditions and suffer from high cost, limited biochemical stability, and potential release of immunogenic fragments. Responding to these challenges, we undertook the de novo discovery of peptide ligands that target different regions of human Fab and enable product release under mild conditions. The ligands were discovered by screening a focused library of 12-mer peptides against a feedstock comprising human Fab and Chinese hamster ovary host cell proteins (CHO HCPs). The identified ligands were evaluated via binding studies as well as molecular docking simulations, returning excellent values of binding capacity (Qmax ∼ 20 mg of Fab per mL of resin) and dissociation constant (KD = 2.16·10-6 M). Selected ligand FRWNFHRNTFFP and commercial Protein L ligands were further characterized by measuring the dynamic binding capacity (DBC10%) at different residence times (RT) and performing the purification of polyclonal and monoclonal Fabs from CHO-K1 cell culture fluids. The peptide ligand featured DBC10% ∼ 6-16 mg/mL (RT of 2 min) and afforded values of yield (93-96%) and purity (89-96%) comparable to those provided by Protein L resins.

Integrated in silico and experimental discovery of trimeric peptide ligands targeting Butyrylcholinesterase.

Butyrylcholinesterase (BChE) is recognized as a high value biotherapeutic in the treatment of Alzheimer's disease and drug addiction. This study presents the rational design and screening of an in-silico library of trimeric peptides against BChE and the experimental characterization of peptide ligands for purification. The selected peptides consistently afforded high BChE recovery (> 90 %) and purity, yielding up to a 1000-fold purification factor. This study revealed a marked anti-correlated conformational movement governed by the ionic strength and pH of the aqueous environment, which ultimately controls BChE binding and release during chromatographic purification; and highlighted the role of residues within and allosteric to the catalytic triad of BChE in determining biorecognition, thus providing useful guidance for ligand design and affinity maturation.

Purification of polyclonal antibodies from Cohn fraction II + III, skim milk, and whey by affinity chromatography using a hexamer peptide ligand.

HWRGWV, a peptide that binds specifically to the Fc fragment of human immunoglobulin G (IgG), was used for the purification of IgG from Cohn fraction II + III of human plasma and from bovine skim milk and whey. The concentration of sodium chloride and sodium caprylate in the binding buffer as well as the pH of the elution buffer were optimized to achieve high IgG yield and purity. Under optimized conditions, IgG was recovered from plasma fractions with yield and purity up to 84% and 95%, respectively. IgG was also purified from skim milk with 74% yield and 92% purity and from whey with 85% yield and 93% purity. Purification experiments were also performed with Protein A resin and the results were found to be similar to those obtained with the peptide adsorbent.

Purification of Adeno-Associated Virus (AAV) Serotype 2 from Spodoptera frugiperda (Sf9) Lysate by Chromatographic Nonwoven Membranes.

The success of adeno-associated virus (AAV)-based therapeutics in gene therapy poses the need for rapid and efficient processes that can support the growing clinical demand. Nonwoven membranes represent an ideal tool for the future of virus purification: owing to their small fiber diameters and high porosity, they can operate at high flowrates while allowing full access to target viral particles without diffusional limitations. This study describes the development of nonwoven ion-exchange membrane adsorbents for the purification of AAV2 from an Sf9 cell lysate. A strong anion-exchange (AEX) membrane was developed by UV grafting glycidyl methacrylate on a polybutylene terephthalate nonwoven followed by functionalization with triethylamine (TEA), resulting in a quaternary amine ligand (AEX-TEA membrane). When operated in bind-and-elute mode at a pH higher than the pI of the capsids, this membrane exhibited a high AAV2 binding capacity (9.6 × 1013 vp·mL-1) at the residence time of 1 min, and outperformed commercial cast membranes by isolating AAV2 from an Sf9 lysate with high productivity (2.4 × 1013 capsids·mL-1·min-1) and logarithmic reduction value of host cell proteins (HCP LRV ~ 1.8). An iminodiacetic acid cation-exchange nonwoven (CEX-IDA membrane) was also prepared and utilized at a pH lower than the pI of capsids to purify AAV2 in a bind-and-elute mode, affording high capsid recovery and impurity removal by eluting with a salt gradient. To further increase purity, the CEX-IDA and AEX-TEA membranes were utilized in series to purify the AAV2 from the Sf9 cell lysate. This membrane-based chromatography process also achieved excellent DNA clearance and a recovery of infectivity higher that that reported using ion-exchange resin chromatography.

Nonwoven Ion-Exchange Membranes with High Protein Binding Capacity for Bioseparations.

This study presents the preparation and characterization of UV-grafted polybutylene terepthalate (PBT) ion exchange nonwoven membranes for chromatographic purification of biomolecules. The PBT nonwoven was functionalized with sulfonate and secondary amine for cation and anion exchange (CEX and AEX), respectively. The anion exchange membrane showed an equilibrium static binding capacity of 1300 mg BSA/g of membrane, while the cationic membranes achieved a maximum equilibrium binding capacity of over 700 mg hIgG/g of membrane. The CEX and AEX membranes resulted in dynamic binding capacities under flow conditions, with a residence time of 0.1 min, of 200 mg hIgG/mL of membrane and 55 mg BSA/mL of membrane, respectively. The selectivity of the PBT-CEX membranes was demonstrated by purifying antibodies and antibody fragments (hIgG and scFv) from CHO cell culture supernatants in a bind-an-elute mode. The purity of the eluted samples exceeded 97%, with good log removal values (LRV) for both host cell proteins (HCPs) and DNA. The PBT-AEX nonwoven membranes exhibited a DNA LRV of 2.6 from hIgG solutions in a flow-through mode with little loss of product. These results indicate that these membranes have significant potential for use in downstream purification of biologics.

Development of Peptide Ligands for Targeted Capture of Host Cell Proteins from Cell Culture Production Harvests.

Capture of host cell proteins (HCPs) from cell culture production harvests is critical to ensure the maximum levels specified by international regulatory bodies of product purity for therapeutic monoclonal antibodies (mAbs). Peptide ligands that selectively target the whole spectrum of the HCPs, while letting the mAb product flow through unbound, are an ideal complement to the affinity-based capture step via Protein A chromatography. In this work, we describe the development of HCP-binding peptide ligands, especially focusing on the steps of (1) peptide selection via library screening and (2) quantification of HCP removal via proteomics by mass spectrometry.

Iminodiacetic Acid (IDA) Cation-Exchange Nonwoven Membranes for Efficient Capture of Antibodies and Antibody Fragments.

There is strong need to reduce the manufacturing costs and increase the downstream purification efficiency of high-value therapeutic monoclonal antibodies (mAbs). This paper explores the performance of a weak cation-exchange membrane based on the coupling of IDA to poly(butylene terephthalate) (PBT) nonwoven fabrics. Uniform and conformal layers of poly(glycidyl methacrylate) (GMA) were first grafted to the surface of the nonwovens. Then IDA was coupled to the polyGMA layers under optimized conditions, resulting in membranes with very high permeability and binding capacity. This resulted in IgG dynamic binding capacities at very short residence times (0.1-2.0 min) that are much higher than those achieved by the best cation-exchange resins. Similar results were obtained in the purification of a single-chain (scFv) antibody fragment. As is customary with membrane systems, the dynamic binding capacities did not change significantly over a wide range of residence times. Finally, the excellent separation efficiency and potential reusability of the membrane were confirmed by five consecutive cycles of mAb capture from its cell culture harvest. The present work provides significant evidence that this weak cation-exchange nonwoven fabric platform might be a suitable alternative to packed resin chromatography for low-cost, higher productivity manufacturing of therapeutic mAbs and antibody fragments.

Binding site on human immunoglobulin G for the affinity ligand HWRGWV.

Affinity ligand HWRGWV has demonstrated the ability to isolate human immunoglobulin G (hIgG) from mammalian cell culture media. The ligand specifically binds hIgG through its Fc portion. This work shows that deglycosylation of hIgG has no influence on its binding to the HWRGWV ligand and the ligand does not compete with Protein A or Protein G in binding hIgG. It is suggested by the mass spectrometry (MS) data and docking simulation that HWRGWV binds to the pFc portion of hIgG and interacts with the amino acids in the loop Ser383-Asn389 (SNGQPEN) located in the C(H)3 domain. Subsequent modeling has suggested a possible three-dimensional minimized solution structure for the interaction of hIgG and the HWRGWV ligand. The results support the fact that a peptide as small as a hexamer can have specific interactions with large proteins such as hIgG.