RESUMEN
A simple strategy for generating stimuli-responsive peptide-based hydrogels via charge-conversion of a self-assembling peptide (SAP) is described. These materials are formulated as soluble, polyanionic peptides, containing maleic acid, citraconic acid, or dimethylmaleic acid masking groups on each lysine residue, which do not form assemblies, but instead flow easily through high gauge needles and catheters. Acid-induced mask hydrolysis renews the zwitterionic nature of the peptides with concomitant and rapid self-assembly via ß-sheet formation into rehealable hydrogels. The use of different masks enables one to tune pH responsiveness and assembly kinetics. In anticipation of their potential for in vivo hydrogel delivery and use, progelators exhibit hemocompatibility in whole human blood, and their peptide components are shown to be noncytotoxic. Finally, demonstration of stimuli-induced self-assembly for dye sequestration suggests a simple, non-covalent strategy for small molecule encapsulation in a degradable scaffold. In summary, this simple, scalable masking strategy allows for preparation of responsive, dynamic self-assembling biomaterials. This work sets the stage for implementing biodegradable therapeutic hydrogels that assemble in response to physiological, disease-relevant states of acidosis.
RESUMEN
We describe cyclic peptide progelators which cleave in response to UV light to generate linearized peptides which then self-assemble into gel networks. Cyclic peptide progelators were synthesized, where the peptides were sterically constrained, but upon UV irradiation, predictable cleavage products were generated. Amino acid sequences and formulation conditions were altered to tune the mechanical properties of the resulting gels. Characterization of the resulting morphologies and chemistry was achieved through liquid phase and standard TEM methods, combined with matrix assisted laser desorption ionization imaging mass spectrometry (MALDI-IMS).
Asunto(s)
Bioimpresión/métodos , Geles/química , Péptidos Cíclicos/química , Materiales Biocompatibles/química , Fotólisis/efectos de la radiación , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción , Rayos UltravioletaRESUMEN
Open-to-air aqueous-phase ring-opening metathesis polymerization-induced self-assembly (ROMPISA) is reported for forming well-defined peptide polymer nanoparticles at room temperature and with high solids concentrations (10 w/w%). For these materials, ROMPISA is shown to provide control over molecular weight with high conversion while open-to-air. Moreover, these peptide polymer nanoparticles can spontaneously rearrange into larger aggregate scaffolds in the presence of the proteolytic enzyme, thermolysin. This work demonstrates the robust nature of ROMPISA, highlighted here for the preparation of stimuli-responsive nanostructures in one pot, in air.
Asunto(s)
Técnicas de Química Sintética/métodos , Nanopartículas/química , Polimerizacion , Polímeros/química , Termolisina/metabolismo , Secuencia de Aminoácidos , Interacciones Hidrofóbicas e Hidrofílicas , Microscopía Electrónica de Transmisión , Peso Molecular , Nanopartículas/ultraestructura , Péptidos/síntesis química , Péptidos/química , Péptidos/metabolismo , Polímeros/síntesis química , Polímeros/metabolismo , Estructura Secundaria de ProteínaRESUMEN
Aptamers are nucleic acid-based ligands that exhibit promising features including specific and reversible target binding and inhibition. Aptamers can function as anticoagulants if they are directed against enzymes of the coagulation cascade. However, they typically suffer from nucleolytic digestion and fast clearance from the bloodstream. We present thrombin-binding aptamer amphiphiles that self-assemble into nanoscale polymeric micelles with a densely functionalized aptamer-displaying corona. We show that these micellar aptamers retain their native secondary structure in a crowded environment and are stabilized against degradation by nucleases in human serum. Moreover, they are effective inhibitors of human plasma clotting in vitro. The inhibitory effect can be rapidly reversed by complementary nucleic acids that break the aptamers' secondary structure upon hybridization. Compared to free aptamers, the increased molecular weight and size of the overall assembly promotes extended blood circulation times in vivo.
Asunto(s)
Anticoagulantes/química , Aptámeros de Nucleótidos/química , Coagulación Sanguínea/efectos de los fármacos , Nanopartículas/química , Trombina/química , Anticoagulantes/farmacología , Aptámeros de Nucleótidos/farmacología , ADN/química , Humanos , Micelas , Estructura Molecular , Tamaño de la Partícula , Polímeros/química , Propiedades de Superficie , Trombina/farmacologíaRESUMEN
Matrix metalloproteinase enzymes, overexpressed in HT-1080 human fibrocarcinoma tumors, were used to guide the accumulation and retention of an enzyme-responsive nanoparticle in a xenograft mouse model. The nanoparticles were prepared as micelles from amphiphilic block copolymers bearing a simple hydrophobic block and a hydrophilic peptide brush. The polymers were end-labeled with Alexa Fluor 647 dyes leading to the formation of labeled micelles upon dialysis of the polymers from DMSO/DMF to aqueous buffer. This dye-labeling strategy allowed the presence of the retained material to be visualized via whole animal imaging in vivo and in ex vivo organ analysis following intratumoral injection into HT-1080 xenograft tumors. We propose that the material is retained by virtue of an enzyme-induced accumulation process whereby particles change morphology from 20 nm spherical micelles to micrometer-scale aggregates, kinetically trapping them within the tumor. This hypothesis is tested here via an unprecedented super-resolution fluorescence analysis of ex vivo tissue slices confirming a particle size increase occurs concomitantly with extended retention of responsive particles compared to unresponsive controls.
Asunto(s)
Enzimas/química , Microscopía Fluorescente/métodos , Nanopartículas , Neoplasias/metabolismo , Animales , Línea Celular , Xenoinjertos , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , RatonesRESUMEN
The increasing concern about climate change has led scientists around the world to develop clean energy technologies that may replace the traditional use of fossil fuels. A promising approach is the utilization of unicellular organisms as electron donors in bio-fuel cells. To date, this method has been limited to microorganisms such as bacteria, yeast, and microalgae. In this work, we show for the first time the concept of using mammalian cell cultures and organoids as electron donors in biofuel cells. We apply cyclic voltammetry to show that upon association of ARPE19 cells with the anode, they release reducing molecules to produce electricity. Furthermore, we apply 2D-fluorescence measurements and show that upon illumination, photosensitive stem cell-derived retinal organoids, which consist of rod photoreceptors and interneurons, secrete NADH and NADPH molecules that can donate electrons at the anode to produce photocurrent.
Asunto(s)
Fuentes de Energía Bioeléctrica , Electricidad , RetinaRESUMEN
Self-assembling peptides (SAPs), which form hydrogels through physical cross-linking of soluble structures, are an intriguing class of materials that have been applied as tissue engineering scaffolds and drug delivery vehicles. For feasible application of these tissue mimetics via minimally invasive delivery, their bulk mechanical properties must be compatible with current delivery strategies. However, injectable SAPs which possess shear-thinning capacity, as well as the ability to reassemble after cessation of shearing can be technically challenging to generate. Many SAPs either clog the high-gauge needle/catheter at high concentration during delivery or are incapable of reassembly following delivery. In this chapter, we provide a detailed protocol for topological control of enzyme-responsive peptide-based hydrogels that enable the user to access both advantages. These materials are formulated as sterically constrained cyclic peptide progelators to temporarily disrupt self-assembly during injection-based delivery, which avoids issues with clogging of needles and catheters as well as nearby vasculature. Proteolytic cleavage by enzymes produced at the target tissue induces progelator linearization and hydrogelation. The scope of this approach is demonstrated by their ability to flow through a catheter without clogging and activated gelation upon exposure to target enzymes.
Asunto(s)
Péptidos Cíclicos/química , Hidrogeles , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
Polymer brush patterns have a central role in established and emerging research disciplines, from microarrays and smart surfaces to tissue engineering. The properties of these patterned surfaces are dependent on monomer composition, polymer height, and brush distribution across the surface. No current lithographic method, however, is capable of adjusting each of these variables independently and with micrometer-scale resolution. Here we report a technique termed Polymer Brush Hypersurface Photolithography, which produces polymeric pixels by combining a digital micromirror device (DMD), an air-free reaction chamber, and microfluidics to independently control monomer composition and polymer height of each pixel. The printer capabilities are demonstrated by preparing patterns from combinatorial polymer and block copolymer brushes. Images from polymeric pixels are created using the light reflected from a DMD to photochemically initiate atom-transfer radical polymerization from initiators immobilized on Si/SiO2 wafers. Patterning is combined with high-throughput analysis of grafted-from polymerization kinetics, accelerating reaction discovery, and optimization of polymer coatings.
RESUMEN
In this paper, we report the preparation of paclitaxel-terminated peptide brush polymers wherein cell uptake and toxicity are tunable based on peptide sequence. Synthesis was enabled using a new paclitaxel-containing chain termination agent for ring-opening metathesis polymerization (ROMP). Critically, reverse phase HPLC could be used to efficiently separate peptide brush polymers consisting of one fluorophore and one terminal paclitaxel from crude polymer mixtures. These purified terminally-modified polymers showed greater potency than the original mixtures. Drug-terminated peptide brush polymers carrying positive charges exhibited enhanced cell uptake and cytotoxicity as compared to their neutral and negatively charged analogues.
Asunto(s)
Antineoplásicos Fitogénicos/administración & dosificación , Paclitaxel/administración & dosificación , Péptidos/administración & dosificación , Polímeros/administración & dosificación , Células A549 , Antineoplásicos Fitogénicos/química , Supervivencia Celular/efectos de los fármacos , Colorantes Fluorescentes/administración & dosificación , Colorantes Fluorescentes/química , Humanos , Paclitaxel/química , Péptidos/química , Polímeros/químicaRESUMEN
We describe the observation of stimuli-induced peptide-based nanoscale assemblies by liquid cell transmission electron microscopy (LCTEM). LCTEM offers the opportunity to directly image nanoscale materials in liquid. Despite broad interest in characterizing biological phenomena, electron beam-induced damage remains a significant problem. Concurrently, methods for verifying chemical structure during or following an LCTEM experiment have been few, with key examples limited to electron diffraction or elemental analysis of crystalline materials; this strategy is not translatable to biopolymers observed in nature. In this proof-of-concept study, oligomeric peptides are biologically or chemically stimulated within the liquid cell in a TEM to assemble into nanostructures. The resulting materials are analyzed by MALDI-imaging mass spectrometry (MALDI-IMS) to verify their identity. This approach confirms whether higher-order assemblies observed by LCTEM consist of intact peptides, verifying that observations made during the in situ experiment are because of those same peptides and not aberrant electron beam damage effects.
Asunto(s)
Microscopía Electrónica de Transmisión/métodos , Nanoestructuras/ultraestructura , Péptidos/análisis , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/métodos , Nanoestructuras/química , Péptidos/química , Prueba de Estudio ConceptualRESUMEN
Injectable biopolymer hydrogels have gained attention for use as scaffolds to promote cardiac function and prevent negative left ventricular (LV) remodeling post-myocardial infarction (MI). However, most hydrogels tested in preclinical studies are not candidates for minimally invasive catheter delivery due to excess material viscosity, rapid gelation times, and/or concerns regarding hemocompatibility and potential for embolism. We describe a platform technology for progelator materials formulated as sterically constrained cyclic peptides which flow freely for low resistance injection, and rapidly assemble into hydrogels when linearized by disease-associated enzymes. Their utility in vivo is demonstrated by their ability to flow through a syringe and gel at the site of MI in rat models. Additionally, synthetic functionalization enables these materials to flow through a cardiac injection catheter without clogging, without compromising hemocompatibility or cytotoxicity. These studies set the stage for the development of structurally dynamic biomaterials for therapeutic hydrogel delivery to the MI.
Asunto(s)
Hidrogeles/química , Infarto del Miocardio/terapia , Péptidos Cíclicos/química , Animales , Catéteres Cardíacos , Hidrogeles/administración & dosificación , Hidrogeles/uso terapéutico , Miocardio/patología , Péptidos Cíclicos/administración & dosificación , Péptidos Cíclicos/uso terapéutico , RatasRESUMEN
In this paper, experiment and simulation were combined to provide a view of the molecular rearrangements underlying the equilibrium and nonequilibrium transitions occurring in stimuli-responsive block copolymer amphiphile self-assemblies. Three block copolymer amphiphiles were prepared, each consisting of a hydrophilic peptide brush, responsive to proteolytic enzymes, and containing one of three possible hydrophobic blocks: (1) poly(ethyl acrylate), (2) poly(styrene), or (3) poly(lauryl acrylate). When assembled, they generate three spherical micelles each responsive to the addition of the bacterial protease, thermolysin. We found core-block-dependent phase transitions in response to the hydrophilic block being truncated by the stimulus. In one example, we found an unexpected, well-defined, pathway-dependent spherical micelle to vesicle phase transition induced by enzymatic stimulus.
RESUMEN
The synthesis of functional polymers encoded with biomolecules has been an extensive area of research for decades. As such, a diverse toolbox of polymerization techniques and bioconjugation methods has been developed. The greatest impact of this work has been in biomedicine and biotechnology, where fully synthetic and naturally derived biomolecules are used cooperatively. Despite significant improvements in biocompatible and functionally diverse polymers, our success in the field is constrained by recognized limitations in polymer architecture control, structural dynamics, and biostabilization. This Perspective discusses the current status of functional biosynthetic polymers and highlights innovative strategies reported within the past five years that have made great strides in overcoming the aforementioned barriers.
RESUMEN
A method for targeting to and retaining intravenously injected nanoparticles at the site of acute myocardial infarction in a rat model is described. Enzyme-responsive peptide-polymer amphiphiles are assembled as spherical micellar nanoparticles, and undergo a morphological transition from spherical-shaped, discrete materials to network-like assemblies when acted upon by matrix metalloproteinases (MMP-2 and MMP-9), which are up-regulated in heart tissue post-myocardial infarction.