RESUMEN
Large-scale, in-lake enclosures (limnocorrals) were used to simulate spills of diluted bitumen (dilbit) in a boreal lake. In this study we use these simulated spills, which covered a range of sizes (oil:water ratio) representative of the upper 25% of onshore crude oil spills in North America (2008-2019), to assess the fate of dilbit-derived hydrocarbons and metals as well as the impacts of the spills on standard water quality parameters. The systems were monitored over 70 days following the application of dilbit amounts ranging between 1.5 and 179.8 L into 10-m diameter, ~100 m3 limnocorrals. The concentration of total petroleum hydrocarbons (TPH) in the water column increased rapidly over the first two weeks reaching a plateau that ranged between 200 µg/L and 2200 µg/L for the lowest and highest treatment respectively. The concentration of total polycyclic aromatic compounds (PACs) also increased over the first two weeks, prior to a slow decrease until day 70. The maximum measured concentrations in the highest treatment were 2858 ng/L for the sum of all 46 quantified PACs, 2716 ng/L for alkylated PACs and 154 ng/L for the 16 EPA priority PAHs. The concentrations of PACs in the sediment increased continuously over the study in the three highest treatments with maximum observed concentrations of 189 ng/g for ΣPAC46, 169 ng/g for ΣPACalk. No significant treatment-related changes in the 16 EPA priority PAHs were observed in the sediment. Of the 25 metals quantified in the water column, only manganese, molybdenum, and vanadium displayed a significant treatment effect with increases of 280, 76 and 25% respectively in the total fraction. These results can help us understand and predict the fate of oil-derived contaminants following a spill and characterize the exposure of freshwater organisms living within them. These results should help inform the risk assessment of future dilbit transportation projects.