Orbital period change of Dimorphos due to the DART kinetic impact.

The Double Asteroid Redirection Test (DART) spacecraft successfully performed the first test of a kinetic impactor for asteroid deflection by impacting Dimorphos, the secondary of near-Earth binary asteroid (65803) Didymos, and changing the orbital period of Dimorphos. A change in orbital period of approximately 7 min was expected if the incident momentum from the DART spacecraft was directly transferred to the asteroid target in a perfectly inelastic collision1, but studies of the probable impact conditions and asteroid properties indicated that a considerable momentum enhancement (ß) was possible2,3. In the years before impact, we used lightcurve observations to accurately determine the pre-impact orbit parameters of Dimorphos with respect to Didymos4-6. Here we report the change in the orbital period of Dimorphos as a result of the DART kinetic impact to be -33.0 ± 1.0 (3σ) min. Using new Earth-based lightcurve and radar observations, two independent approaches determined identical values for the change in the orbital period. This large orbit period change suggests that ejecta contributed a substantial amount of momentum to the asteroid beyond what the DART spacecraft carried.

Ejecta from the DART-produced active asteroid Dimorphos.

Some active asteroids have been proposed to be formed as a result of impact events1. Because active asteroids are generally discovered by chance only after their tails have fully formed, the process of how impact ejecta evolve into a tail has, to our knowledge, not been directly observed. The Double Asteroid Redirection Test (DART) mission of NASA2, in addition to having successfully changed the orbital period of Dimorphos3, demonstrated the activation process of an asteroid resulting from an impact under precisely known conditions. Here we report the observations of the DART impact ejecta with the Hubble Space Telescope from impact time T + 15 min to T + 18.5 days at spatial resolutions of around 2.1 km per pixel. Our observations reveal the complex evolution of the ejecta, which are first dominated by the gravitational interaction between the Didymos binary system and the ejected dust and subsequently by solar radiation pressure. The lowest-speed ejecta dispersed through a sustained tail that had a consistent morphology with previously observed asteroid tails thought to be produced by an impact4,5. The evolution of the ejecta after the controlled impact experiment of DART thus provides a framework for understanding the fundamental mechanisms that act on asteroids disrupted by a natural impact1,6.

Successful kinetic impact into an asteroid for planetary defence.

Although no known asteroid poses a threat to Earth for at least the next century, the catalogue of near-Earth asteroids is incomplete for objects whose impacts would produce regional devastation1,2. Several approaches have been proposed to potentially prevent an asteroid impact with Earth by deflecting or disrupting an asteroid1-3. A test of kinetic impact technology was identified as the highest-priority space mission related to asteroid mitigation1. NASA's Double Asteroid Redirection Test (DART) mission is a full-scale test of kinetic impact technology. The mission's target asteroid was Dimorphos, the secondary member of the S-type binary near-Earth asteroid (65803) Didymos. This binary asteroid system was chosen to enable ground-based telescopes to quantify the asteroid deflection caused by the impact of the DART spacecraft4. Although past missions have utilized impactors to investigate the properties of small bodies5,6, those earlier missions were not intended to deflect their targets and did not achieve measurable deflections. Here we report the DART spacecraft's autonomous kinetic impact into Dimorphos and reconstruct the impact event, including the timeline leading to impact, the location and nature of the DART impact site, and the size and shape of Dimorphos. The successful impact of the DART spacecraft with Dimorphos and the resulting change in the orbit of Dimorphos7 demonstrates that kinetic impactor technology is a viable technique to potentially defend Earth if necessary.

Momentum transfer from the DART mission kinetic impact on asteroid Dimorphos.

The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on 26 September 2022 as a planetary defence test1. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defence, intended to validate kinetic impact as a means of asteroid deflection. Here we report a determination of the momentum transferred to an asteroid by kinetic impact. On the basis of the change in the binary orbit period2, we find an instantaneous reduction in Dimorphos's along-track orbital velocity component of 2.70 ± 0.10 mm s-1, indicating enhanced momentum transfer due to recoil from ejecta streams produced by the impact3,4. For a Dimorphos bulk density range of 1,500 to 3,300 kg m-3, we find that the expected value of the momentum enhancement factor, ß, ranges between 2.2 and 4.9, depending on the mass of Dimorphos. If Dimorphos and Didymos are assumed to have equal densities of 2,400 kg m-3, [Formula: see text]. These ß values indicate that substantially more momentum was transferred to Dimorphos from the escaping impact ejecta than was incident with DART. Therefore, the DART kinetic impact was highly effective in deflecting the asteroid Dimorphos.

Compositions of iron-meteorite parent bodies constrain the structure of the protoplanetary disk.

Magmatic iron-meteorite parent bodies are the earliest planetesimals in the Solar System, and they preserve information about conditions and planet-forming processes in the solar nebula. In this study, we include comprehensive elemental compositions and fractional-crystallization modeling for iron meteorites from the cores of five differentiated asteroids from the inner Solar System. Together with previous results of metallic cores from the outer Solar System, we conclude that asteroidal cores from the outer Solar System have smaller sizes, elevated siderophile-element abundances, and simpler crystallization processes than those from the inner Solar System. These differences are related to the formation locations of the parent asteroids because the solar protoplanetary disk varied in redox conditions, elemental distributions, and dynamics at different heliocentric distances. Using highly siderophile-element data from iron meteorites, we reconstruct the distribution of calcium-aluminum-rich inclusions (CAIs) across the protoplanetary disk within the first million years of Solar-System history. CAIs, the first solids to condense in the Solar System, formed close to the Sun. They were, however, concentrated within the outer disk and depleted within the inner disk. Future models of the structure and evolution of the protoplanetary disk should account for this distribution pattern of CAIs.

A revised trapped melt model for iron meteorites applied to the IIIAB group.

As the largest magmatic iron meteorite group, the IIIAB group is often used to investigate the process of core crystallization in asteroid-sized bodies. However, previous IIIAB crystallization models have not succeeded in both explaining the scatter among IIIAB irons around the main crystallization trends and using elemental partitioning behavior consistent with experimental determinations. This study outlines a revised approach for modeling the crystallization of irons that uses experimentally determined partition coefficients and can reproduce the IIIAB trends and their associated scatter for 12 siderophile elements simultaneously. A key advancement of this revised trapped melt model is the inclusion of an effect on the resulting solid metal composition due to the formation of troilite. The revised trapped melt model supports the previous conclusion that trapped melt played an important role in the genesis of IIIAB irons and matches the trace element fractionation trends observed in the Cape York suite as due to different amounts of trapped melt. Applying the revised trapped melt model to 16 elements as well as S and Fe, the bulk composition of the IIIAB core is found to have a composition consistent with that expected from a chondritic precursor for refractory siderophile elements but with evidence for depletions of more volatile elements. The bulk S composition of the IIIAB core is estimated as 9 ± 1 wt%, implying that a substantial amount of S-rich material from the IIIAB core is underrepresented in our meteorite collections. Future applications of the revised trapped melt model to other magmatic iron meteorite groups can enable comparisons between the core compositions and crystallization processes across the early solar system.

MEGANE investigations of Phobos and the Small Body Mapping Tool.

The MEGANE instrument onboard the MMX mission will acquire gamma-ray and neutron spectroscopy data of Phobos to determine the elemental composition of the martian moon and provide key constraints on its origin. To produce accurate compositional results, the irregular shape of Phobos and its proximity to Mars must be taken into account during the analysis of MEGANE data. The MEGANE team is adapting the Small Body Mapping Tool (SBMT) to handle gamma-ray and neutron spectroscopy investigations, building on the demonstrated record of success of the SBMT being applied to scientific investigations on other spacecraft missions of irregularly shaped bodies. This is the first application of the SBMT to a gamma-ray and neutron spectroscopy dataset, and the native, three-dimensional foundation of the SBMT is well suited to MEGANE's needs. In addition, the SBMT will enable comparisons between the MEGANE datasets and other datasets of the martian moons, including data from previous spacecraft missions and MMX's multi-instrument suite.

Analytical protocols for Phobos regolith samples returned by the Martian Moons eXploration (MMX) mission.

Japan Aerospace Exploration Agency (JAXA) will launch a spacecraft in 2024 for a sample return mission from Phobos (Martian Moons eXploration: MMX). Touchdown operations are planned to be performed twice at different landing sites on the Phobos surface to collect > 10 g of the Phobos surface materials with coring and pneumatic sampling systems on board. The Sample Analysis Working Team (SAWT) of MMX is now designing analytical protocols of the returned Phobos samples to shed light on the origin of the Martian moons as well as the evolution of the Mars-moon system. Observations of petrology and mineralogy, and measurements of bulk chemical compositions and stable isotopic ratios of, e.g., O, Cr, Ti, and Zn can provide crucial information about the origin of Phobos. If Phobos is a captured asteroid composed of primitive chondritic materials, as inferred from its reflectance spectra, geochemical data including the nature of organic matter as well as bulk H and N isotopic compositions characterize the volatile materials in the samples and constrain the type of the captured asteroid. Cosmogenic and solar wind components, most pronounced in noble gas isotopic compositions, can reveal surface processes on Phobos. Long- and short-lived radionuclide chronometry such as 53Mn-53Cr and 87Rb-87Sr systematics can date pivotal events like impacts, thermal metamorphism, and aqueous alteration on Phobos. It should be noted that the Phobos regolith is expected to contain a small amount of materials delivered from Mars, which may be physically and chemically different from any Martian meteorites in our collection and thus are particularly precious. The analysis plan will be designed to detect such Martian materials, if any, from the returned samples dominated by the endogenous Phobos materials in curation procedures at JAXA before they are processed for further analyses.

Experimental Partitioning of Trace Elements into Schreibersite with Applications to IIG Iron Meteorites.

Some of the defining characteristics of the IIG iron meteorite group are their high bulk P contents and massive, coarse schreibersite, which have been calculated to make up roughly 11-14 wt% of each specimen. In this study, we produced two datasets to investigate the formation of schreibersites in IIG irons: measurements of trace elements in the IIG iron meteorite Twannberg and experimental determinations of trace element partitioning into schreibersite. The schreibersite-bearing experiments were conducted with schreibersite in equilibrium with a P-rich melt and with bulk Ni contents ranging from 0-40 wt%. The partitioning behavior for the 20 elements measured in this study did not vary with Ni content. Comparison of the Twannberg measurements with the experimental results required a correction factor to account for the fact that the experiments were conducted in a simplified system that did not contain a solid metal phase. Previously determined solid metal/P-rich melt partition coefficients were applied to infer schreibersite/solid metal partitioning behavior from the experiments, and once this correction was applied, the two datasets showed broad similarities between the schreibersite/solid metal distribution of elements. However, there were also differences noted, in particular between the Ni and P contents of the solid metal relative to the schreibersite inferred from the experiments compared to that measured in the Twannberg sample. These differences support previous interpretations that subsolidus schreibersite evolution has strongly influenced the Ni and P content now present in the solid metal phase of IIG irons. Quantitative attempts to match the IIG solid metal composition to that of late-stage IIAB irons through subsolidus schreibersite growth were not successful, but qualitatively, this study corroborates the striking similarities between the IIAB and IIG groups, which are highly suggestive of a possible genetic link between the groups as has been previously proposed.

Experimental Determination of Partitioning in the Fe-Ni System for Applications to Modeling Meteoritic Metals.

Experimental trace element partitioning values are often used to model the chemical evolution of metallic phases in meteorites, but limited experimental data were previously available to constrain the partitioning behavior in the basic Fe-Ni system. In this study, we conducted experiments that produced equilibrium solid metal and liquid metal phases in the Fe-Ni system and measured the partition coefficients of 25 elements. The results are in good agreement with values modeled from IVB iron meteorites and with the limited previous experimental data. Additional experiments with low levels of S and P were also conducted, to help constrain the partitioning behaviors of elements as a function of these light elements. The new experimental results were used to derive a set of parameterization values for element solid metal-liquid metal partitioning behavior in the Fe-Ni-S, Fe-Ni-P, and Fe-Ni-C ternary systems at 0.1 MPa. The new parameterizations require that the partitioning behaviors in the light-element-free Fe-Ni system are those determined experimentally by this study, in contrast to previous parameterizations that allowed this value to be determined as a best-fit parameter. These new parameterizations, with self-consistent values for partitioning in the end-member Fe-Ni system, provide a valuable resource for future studies that model the chemical evolution of metallic phases in meteorites.

Imaging Mercury's Polar Deposits during MESSENGER's Low-altitude Campaign.

Images obtained during MESSENGER's low-altitude campaign in the final year of the mission provide the highest-spatial-resolution views of Mercury's polar deposits. Images for distinct areas of permanent shadow within 35 north polar craters were successfully captured during the campaign. All of these regions of permanent shadow were found to have low-reflectance surfaces with well-defined boundaries. Additionally, brightness variations across the deposits correlate with variations in the biannual maximum surface temperature across the permanently shadowed regions, supporting the conclusion that multiple volatile organic compounds are contained in Mercury's polar deposits, in addition to water ice. A recent large impact event or ongoing bombardment by micrometeoroids could deliver water as well as many volatile organic compounds to Mercury. Either scenario is consistent with the distinctive reflectance properties and well-defined boundaries of Mercury's polar deposits and the presence of volatiles in all available cold traps.

Mechanical properties of rubble pile asteroids (Dimorphos, Itokawa, Ryugu, and Bennu) through surface boulder morphological analysis.

Planetary defense efforts rely on estimates of the mechanical properties of asteroids, which are difficult to constrain accurately from Earth. The mechanical properties of asteroid material are also important in the interpretation of the Double Asteroid Redirection Test (DART) impact. Here we perform a detailed morphological analysis of the surface boulders on Dimorphos using images, the primary data set available from the DART mission. We estimate the bulk angle of internal friction of the boulders to be 32.7 ± 2. 5° from our measurements of the roundness of the 34 best-resolved boulders ranging in size from 1.67-6.64 m. The elongated nature of the boulders around the DART impact site implies that they were likely formed through impact processing. Finally, we find striking similarities in the morphology of the boulders on Dimorphos with those on other rubble pile asteroids (Itokawa, Ryugu and Bennu). This leads to very similar internal friction angles across the four bodies and suggests that a common formation mechanism has shaped the boulders. Our results provide key inputs for understanding the DART impact and for improving our knowledge about the physical properties, the formation and the evolution of both near-Earth rubble-pile and binary asteroids.

The geology and evolution of the Near-Earth binary asteroid system (65803) Didymos.

Images collected during NASA's Double Asteroid Redirection Test (DART) mission provide the first resolved views of the Didymos binary asteroid system. These images reveal that the primary asteroid, Didymos, is flattened and has plausible undulations along its equatorial perimeter. At high elevations, its surface is rough and contains large boulders and craters; at low elevations its surface is smooth and possesses fewer large boulders and craters. Didymos' moon, Dimorphos, possesses an intimate mixture of boulders, several asteroid-wide lineaments, and a handful of craters. The surfaces of both asteroids include boulders that are large relative to their host body, suggesting that both asteroids are rubble piles. Based on these observations, our models indicate that Didymos has a surface cohesion ≤ 1 Pa and an interior cohesion of ∼10 Pa, while Dimorphos has a surface cohesion of <0.9 Pa. Crater size-frequency analyzes indicate the surface age of Didymos is 40-130 times older than Dimorphos, with likely absolute ages of ~ 12.5 Myr and <0.3 Myr, respectively. Solar radiation could have increased Didymos' spin rate leading to internal deformation and surface mass shedding, which likely created Dimorphos.

Compositions of carbonaceous-type asteroidal cores in the early solar system.

The parent cores of iron meteorites belong to the earliest accreted bodies in the solar system. These cores formed in two isotopically distinct reservoirs: noncarbonaceous (NC) type and carbonaceous (CC) type in the inner and outer solar system, respectively. We measured elemental compositions of CC-iron groups and used fractional crystallization modeling to reconstruct the bulk compositions and crystallization processes of their parent asteroidal cores. We found generally lower S and higher P in CC-iron cores than in NC-iron cores and higher HSE (highly siderophile element) abundances in some CC-iron cores than in NC-iron cores. We suggest that the different HSE abundances among the CC-iron cores are related to the spatial distribution of refractory metal nugget-bearing calcium aluminum-rich inclusions (CAIs) in the protoplanetary disk. CAIs may have been transported to the outer solar system and distributed heterogeneously within the first million years of solar system history.

Heavy iron isotope composition of iron meteorites explained by core crystallization.

Similar to Earth, many large planetesimals in the Solar System experienced planetary-scale processes such as accretion, melting, and differentiation. As their cores cooled and solidified, significant chemical fractionation occurred due to solid metal-liquid metal fractionation. Iron meteorites -- core remnants of these ancient planetesimals -- record a history of this process. Recent Fe isotope analyses of iron meteorites found δ57/54Fe to be heavier than chondritic by approximately 0.1 to 0.2 ‰ for most meteorites, indicating that a common parent body process was responsible. However, the mechanism for this fractionation remains poorly understood. Here we experimentally show that the Fe isotopic composition of iron meteorites can be explained solely by core crystallization. In our experiments of core crystallization at 1300 °C, we find that solid metal becomes enriched in δ57/54Fe by 0.13 ‰ relative to liquid metal. Fractional crystallization modelling of the IIIAB iron meteorite parent body shows that observed Ir, Au and Fe isotopic compositions can be simultaneously reproduced during core crystallization. The model implies the formation of complementary S-rich components of the iron meteorite parental cores that remain unsampled by meteorite records and may be the missing reservoir of isotopically-light Fe. The lack of sulfide meteorites and previous trace element modeling predicting significant unsampled volumes of iron meteorite parent cores support our findings.

New Illumination and Temperature Constraints of Mercury's Volatile Polar Deposits.

Images from the Mercury Dual Imaging System (MDIS) aboard the MErcury Surface, Space ENvironment, GEochemistry, and Ranging mission reveal low-reflectance polar deposits that are interpreted to be lag deposits of organic-rich, volatile material. Interpretation of these highest-resolution images of Mercury's polar deposits has been limited by the available topography models, so local high-resolution (125 m pixel-1) digital elevation models (DEMs) were made using a combination of data from the Mercury Laser Altimeter (MLA) and from shape-from-shading techniques using MDIS images. Local DEMs were made for eight of Mercury's north polar craters; these DEMs were then used to create high-resolution simulated image, illumination, and thermal models. The simulated images reveal that the pixel brightness variations imaged within Mercury's low-reflectance deposits are consistent with scattered light reflecting off of topography and do not need to be explained by volatile compositional differences as previously suggested. The illumination and thermal models show that these low-reflectance polar deposits extend beyond the permanently shadowed region, more than 1.0 km in some locations, and correspond to a maximum surface temperature of greater than 250 K but less than 350 K. The low-reflectance boundaries of all eight polar deposits studied here show a close correspondence with the surface stability boundary of coronene (C24H12). While coronene should only be viewed as a proxy for the myriad volatile compounds that may exist in Mercury's polar deposits, coronene's surface stability boundary supports the idea that Mercury's low-reflectance polar deposits are composed of macromolecular organic compounds, consistent with the hypotheses of exogenous transport and in situ production.

The thickness of radar-bright deposits in Mercury's northern hemisphere from individual Mercury Laser Altimeter tracks.

The discovery of Mercury's radar-bright deposits has expanded our understanding of volatiles in the solar system. Key to deciphering the history and origin of the radar-bright deposits is an estimate of the volume of radar-bright material that in turn requires a measure of the average thickness of the deposits. In this study we investigate changes in topography across radar-bright deposits hosted in flat-floored, complex craters using individual edited Mercury Laser Altimeter (MLA) tracks. We compare the difference in heights of radar-bright regions and non-radar-bright regions of the crater floor and the difference of similarly sized and located regions in non-radar-bright craters and show that the two populations cannot be distinguished. The similarity of topography in these two sets of craters allows an upper limit of 15 m to be placed on the thickness of the radar-bright deposits.

Investigating Mercury's South Polar Deposits: Arecibo Radar Observations and High-resolution Determination of Illumination Conditions.

There is strong evidence that Mercury's polar deposits are water ice hosted in permanently shadowed regions. In this study, we present new Arecibo radar observations of Mercury's south pole, which reveal numerous radar-bright deposits and substantially increase the radar imaging coverage. We also use images from MESSENGER's full mission to determine the illumination conditions of Mercury's south polar region at the same spatial resolution as the north polar region, enabling comparisons between the two poles. The area of radar-bright deposits in Mercury's south is roughly double that found in the north, consistent with the larger permanently shadowed area in the older, cratered terrain at the south relative to the younger smooth plains at the north. Radar-bright features are strongly associated with regions of permanent shadow at both poles, consistent with water ice being the dominant component of the deposits. However, both of Mercury's polar regions show that roughly 50% of permanently shadowed regions lack radar-bright deposits, despite some of these locations having thermal environments that are conducive to the presence of water ice. The observed uneven distribution of water ice among Mercury's polar cold traps may suggest that the source of Mercury's water ice was not a steady, regular process but rather that the source was an episodic event, such as a recent, large impact on the innermost planet.

Comparison of areas in shadow from imaging and altimetry in the north polar region of Mercury and implications for polar ice deposits.

Earth-based radar observations and results from the MESSENGER mission have provided strong evidence that permanently shadowed regions near Mercury's poles host deposits of water ice. MESSENGER's complete orbital image and topographic datasets enable Mercury's surface to be observed and modeled under an extensive range of illumination conditions. The shadowed regions of Mercury's north polar region from 65°N to 90°N were mapped by analyzing Mercury Dual Imaging System (MDIS) images and by modeling illumination with Mercury Laser Altimeter (MLA) topographic data. The two independent methods produced strong agreement in identifying shadowed areas. All large radar-bright deposits, those hosted within impact craters ≥6 km in diameter, collocate with regions of shadow identified by both methods. However, only ∼46% of the persistently shadowed areas determined from images and ∼43% of the permanently shadowed areas derived from altimetry host radar-bright materials. Some sizable regions of shadow that do not host radar-bright deposits experience thermal conditions similar to those that do. The shadowed craters that lack radar-bright materials show a relation with longitude that is not related to the thermal environment, suggesting that the Earth-based radar observations of these locations may have been limited by viewing geometry, but it is also possible that water ice in these locations is insulated by anomalously thick lag deposits or that these shadowed regions do not host water ice.

Hollows on Mercury: MESSENGER evidence for geologically recent volatile-related activity.

High-resolution images of Mercury's surface from orbit reveal that many bright deposits within impact craters exhibit fresh-appearing, irregular, shallow, rimless depressions. The depressions, or hollows, range from tens of meters to a few kilometers across, and many have high-reflectance interiors and halos. The host rocks, which are associated with crater central peaks, peak rings, floors, and walls, are interpreted to have been excavated from depth by the crater-forming process. The most likely formation mechanisms for the hollows involve recent loss of volatiles through some combination of sublimation, space weathering, outgassing, or pyroclastic volcanism. These features support the inference that Mercury's interior contains higher abundances of volatile materials than predicted by most scenarios for the formation of the solar system's innermost planet.