Micronuclear battery based on a coalescent energy transducer.

Micronuclear batteries harness energy from the radioactive decay of radioisotopes to generate electricity on a small scale, typically in the nanowatt or microwatt range1,2. Contrary to chemical batteries, the longevity of a micronuclear battery is tied to the half-life of the used radioisotope, enabling operational lifetimes that can span several decades3. Furthermore, the radioactive decay remains unaffected by environmental factors such as temperature, pressure and magnetic fields, making the micronuclear battery an enduring and reliable power source in scenarios in which conventional batteries prove impractical or challenging to replace4. Common radioisotopes of americium (241Am and 243Am) are α-decay emitters with half-lives longer than hundreds of years. Severe self-adsorption in traditional architectures of micronuclear batteries impedes high-efficiency α-decay energy conversion, making the development of α-radioisotope micronuclear batteries challenging5,6. Here we propose a micronuclear battery architecture that includes a coalescent energy transducer by incorporating 243Am into a luminescent lanthanide coordination polymer. This couples radioisotopes with energy transducers at the molecular level, resulting in an 8,000-fold enhancement in energy conversion efficiency from α decay energy to sustained autoluminescence compared with that of conventional architectures. When implemented in conjunction with a photovoltaic cell that translates autoluminescence into electricity, a new type of radiophotovoltaic micronuclear battery with a total power conversion efficiency of 0.889% and a power per activity of 139 microwatts per curie (µW Ci-1) is obtained.

Ultrafiltration separation of Am(VI)-polyoxometalate from lanthanides.

Partitioning of americium from lanthanides (Ln) present in used nuclear fuel plays a key role in the sustainable development of nuclear energy1-3. This task is extremely challenging because thermodynamically stable Am(III) and Ln(III) ions have nearly identical ionic radii and coordination chemistry. Oxidization of Am(III) to Am(VI) produces AmO22+ ions distinct with Ln(III) ions, which has the potential to facilitate separations in principle. However, the rapid reduction of Am(VI) back to Am(III) by radiolysis products and organic reagents required for the traditional separation protocols including solvent and solid extractions hampers practical redox-based separations. Herein, we report a nanoscale polyoxometalate (POM) cluster with a vacancy site compatible with the selective coordination of hexavalent actinides (238U, 237Np, 242Pu and 243Am) over trivalent lanthanides in nitric acid media. To our knowledge, this cluster is the most stable Am(VI) species in aqueous media observed so far. Ultrafiltration-based separation of nanoscale Am(VI)-POM clusters from hydrated lanthanide ions by commercially available, fine-pored membranes enables the development of a once-through americium/lanthanide separation strategy that is highly efficient and rapid, does not involve any organic components and requires minimal energy input.

Hydrogen Isotope Effect Endows a Breakthrough in Photoluminescent Covalent Organic Frameworks.

Luminescent covalent organic frameworks (LCOFs) have emerged as indispensable candidates in various applications due to their greater tunable emitting properties and structural robustness compared to small molecule emitters. An unsolved issue in this area is developing highly luminescent LCOFs of which the nonradiative quenching pathways were suppressed as much as possible. Here, a robust aminal-linked COF (DD-COF) possessing perdeuterated light-emitting monomers was designed and synthesized. The solid-state photoluminescence quantum yield of the DD-COF reaches 81%, significantly outcompeting all state-of-the-art LCOFs reported so far. The exceptional luminescent efficiency is attributed to the inhibition of different pathways of nonradiative decay, especially from bond vibrations where only substitution by a heavier isotope with a lower zero-point vibration frequency works. Furthermore, the prepared deuterated COF not only boosts higher photostability under UV irradiation but also enables superior fluorescence sensing performance for iodine detection compared to nondeuterated COF.

4f/5d Hybridization Induced Single-Electron Delocalization in an Azide-Bridged Dicerium Complex.

Dilanthanide complexes with one-electron delocalization are important targets for understanding the specific 4f/5d-bonding feature in lanthanide chemistry. Here, we report an isolable azide-bridged dicerium complex 3 [{(TrapenTMS)Ce}2(µ-N3)]• [Trapen = tris (2-aminobenzyl)amine; TMS = SiMe3], which is synthesized by the reaction of tripodal ligand-supported (TrapenTMS)CeIVCl complex 2 with NaN3. The structure and bonding nature of 3 are fully characterized by X-ray crystal diffraction analysis, electron paramagnetic resonance (EPR), magnetic measurement, cyclic voltammetry, X-ray absorption spectroscopy, and quantum-theoretical studies. Complex 3 presents a trans-bent central Ce-N3-Ce unit with a single electron of two mixed-valent Ce atoms. The unique low-temperature (2 K) anisotropic EPR signals [g = 1.135, 2.003, and 3.034] of 3 indicate that its spin density is distributed on the central Ce-N3-Ce unit with marked electron delocalization. Quantum chemical analyses show strong 4f/5d orbital mixing in the singly occupied molecular orbital of 3, which allows for the unpaired electron to extend throughout the cerium-azide-cerium unit via a multicentered one-electron (Ce-N3-Ce) interaction. This work extends the family of mixed-valent dilanthanide complexes and provides a paradigm for understanding the bonding motif of ligand-bridged dilanthanide complexes.

Isotope Effect-Enabled Crystal Enlargement in Metal-Organic Frameworks.

Synthesizing large metal-organic framework (MOF) single crystals has garnered significant research interest, although it is hindered by the fast nucleation kinetics that gives rise to numerous small nuclei. Given the different chemical origins inherent in various types of MOFs, the development of a general approach to enhancing their crystal sizes presents a formidable challenge. Here, we propose a simple isotopic substitution strategy to promote size growth in MOFs by inhibiting nucleation, resulting in a substantial increase in the crystal volume ranging from 1.7- to 165-fold. Impressively, the crystals prepared under optimized conditions by normal approaches can be further enlarged by the isotope effect, yielding the largest MOF single crystal (2.9 cm × 0.48 cm × 0.23 cm) among the one-pot synthesis method. Detailed in situ characterizations reveal that the isotope effect can retard crystallization kinetics, establish a higher nucleation energy barrier, and consequently generate fewer nuclei that eventually grow larger. Compared with the smaller crystals, the isotope effect-enlarged crystal shows 33% improvement in the X-ray dose rate detection limit. This work enriches the understanding of the isotope effect on regulating the crystallization process and provides inspiration for exploring potential applications of large MOF single crystals.

Recognition of Actinides by Siderocalin.

Plain simulations and enhanced sampling unveil a novel siderocalin (Scn) recognition mode for An-Ent (where An = actinides and Ent = enterobactin) complexes and identify a "seesaw" relationship between actinide affinity to Ent and Scn recognition to an An-Ent complex. Electrostatic interactions predominantly govern competitive binding in both processes. Additionally, hydrolysis-induced negative charge, water expulsion-driven entropy, and Ent's conformational adaptability collectively enhance high-affinity recognition.

One-Pot Synthesis of a Mixed-Valent Copper(I/II)-Coordinated Covalent Organic Framework Induced by γ-Ray Radiation.

Metal-anchored covalent organic frameworks (COFs), as a class of significant derivatives of COFs, are widely used as heterogeneous catalysts in diverse chemical reactions. However, they are typically synthesized via post-treatment strategies, which often lead to the decline of COF crystallinity, decrease of porous properties, instability in catalytic performances, generation of additional chemical waste, and consumption of excess time and energy. In this work, we demonstrate an approach to construct a metal-functionalized COF via a one-pot method induced by γ-ray radiation. Specifically, copper-coordinated COF was in situ synthesized by irradiating a mixture of monomers and copper salt under ambient conditions. Interestingly, the initial Cu2+ ions were reduced to Cu+ ions by the radiation-generated reducing species, affording a unique mixed-valent copper(I/II)-coordinated COF. Additionally, the copper-coordinated COF displayed enhanced crystallinity and porous properties compared to those of the parent COF, displaying an opposite trend to the postsynthetic method. Notably, the introduced copper on the COF skeleton endowed the parent COF with catalytic ability. The resulting copper-coordinated COF exhibited remarkable catalytic performances in the reduction of 4-nitrophenol to 4-aminophenol and maintained almost unchanged catalytic performance after five catalytic cycles.

A MOF@Metal Oxide Heterostructure Induced by Post-Synthetic Gamma-Ray Irradiation for Catalytic Reduction.

Metal-organic framework (MOF) based heterostructures, which exhibit enhanced or unexpected functionality and properties due to synergistic effects, are typically synthesized using post-synthetic strategies. However, several reported post-synthetic strategies remain unsatisfactory, considering issues such as damage to the crystallinity of MOFs, presence of impure phases, and high time and energy consumption. In this work, we demonstrate for the first time a novel route for constructing MOF based heterostructures using radiation-induced post-synthesis, highlighting the merits of convenience, ambient conditions, large-scale production, and notable time and energy saving. Specifically, a new HKUST-1@Cu2O heterostructure was successfully synthesized by simply irradiating a methanol solution dispersed of HKUST-1 with gamma ray under ambient conditions. The copper source of Cu2O was directly derived from in situ radiation etching and reduction of the parent HKUST-1, without the use of any additional copper reagents. Significantly, the resulting HKUST-1@Cu2O heterostructure exhibits remarkable catalytic performance, with a catalytic rate constant nearly two orders of magnitude higher than that of the parent HKUST-1.

Record High Iodate Anion Capture by a Redox-Active Cationic Polymer Network.

As a critical radioactive anionic contaminant, traditional adsorbents primarily remove iodate (IO3 -) through ion exchange or hard acid-hard base interactions, but suffer from limited affinity and capacity. Herein, employing the synergistic effect of ion exchange and redox, we successfully synthesized a redox-active cationic polymer network (SCU-CPN-6, [C9H10O2N5 ⋅ Cl]n) by merging guanidino groups with ion-exchange capability and phenolic groups with redox ability via a Schiff base reaction. SCU-CPN-6 exhibits a groundbreaking adsorption capacity of 896 mg/g for IO3 -. The inferior adsorption capacities of polymeric networks containing only redox (~0 mg/g) or ion exchange (232 mg/g) fragments underscore the synergistic "1+1>2" effect of the two mechanisms. Besides, SCU-CPN-6 shows excellent uptake selectivity for IO3 - in the presence of high concentrations of SO4 2-, Cl-, and NO3 -. Meanwhile, a high distribution coefficient indicates its exemplary deep-removal performance for low IO3 - concentration. The synergic strategy not only presents a breakthrough solution for the efficient removal of IO3 - but also establishes a promising avenue for the design of advanced adsorbents for diverse applications.

A Radioluminescent Metal-Organic Framework for Monitoring 225Ac in Vivo.

225Ac is considered as one of the most promising radioisotopes for alpha-therapy because its emitted high-energy α-particles can efficiently damage tumor cells. However, it also represents a significant threat to healthy tissues owing to extremely high radiotoxicity if targeted therapy fails. This calls for a pressing requirement of monitoring the biodistribution of 225Ac in vivo during the treatment of tumors. However, the lack of imageable photons or positrons from therapeutic doses of 225Ac makes this task currently quite challenging. We report here a nanoscale luminescent europium-organic framework (EuMOF) that allows for fast, simple, and efficient labeling of 225Ac in its crystal structure with sufficient 225Ac-retention stability based on similar coordination behaviors between Ac3+ and Eu3+. After labeling, the short distance between 225Ac and Eu3+ in the structure leads to exceedingly efficient energy transduction from225Ac-emitted α-particles to surrounding Eu3+ ions, which emits red luminescence through a scintillation process and produces sufficient photons for clearcut imaging. The in vivo intensity distribution of radioluminescence signal originating from the 225Ac-labeled EuMOF is consistent with the dose of 225Ac dispersed among the various organs determined by the radioanalytical measurement ex vivo, certifying the feasibility of in vivo directly monitoring 225Ac using optical imaging for the first time. In addition, 225Ac-labeled EuMOF displays notable efficiency in treating the tumor. These results provide a general design principle for fabricating 225Ac-labeled radiopharmaceuticals with imaging photons and propose a simple way to in vivo track radionuclides with no imaging photons, including but not limited to 225Ac.

Thermally Induced Orderly Alignment of Porphyrin Photoactive Motifs in Metal-Organic Frameworks for Boosting Photocatalytic CO2 Reduction.

Efficient transfer of charge carriers through a fast transport pathway is crucial to excellent photocatalytic reduction performance in solar-driven CO2 reduction, but it is still challenging to effectively modulate the electronic transport pathway between photoactive motifs by feasible chemical means. In this work, we propose a thermally induced strategy to precisely modulate the fast electron transport pathway formed between the photoactive motifs of a porphyrin metal-organic framework using thorium ion with large ionic radius and high coordination number as the coordination-labile metal node. As a result, the stacking pattern of porphyrin molecules in the framework before and after the crystal transformations has changed dramatically, which leads to significant differences in the separation efficiency of photogenerated carriers in MOFs. The rate of photocatalytic reduction of CO2 to CO by IHEP-22(Co) reaches 350.9 µmol·h-1·g-1, which is 3.60 times that of IHEP-21(Co) and 1.46 times that of IHEP-23(Co). Photoelectrochemical characterizations and theoretical calculations suggest that the electron transport channels formed between porphyrin molecules inhibit the recombination of photogenerated carriers, resulting in high performance for photocatalytic CO2 reduction. The interaction mechanism of CO2 with IHEP-22(Co) was clarified by using in-situ electron paramagnetic resonance, in-situ diffuse reflectance infrared Fourier transform spectroscopy, in-situ extended X-ray absorption fine structure spectroscopy, and theoretical calculations. These results provide a new method to regulate the efficient separation and migration of charge carriers in CO2 reduction photocatalysts and will be helpful to guide the design and synthesis of photocatalysts with superior performance for the production of solar fuels.

Radiation-Induced De Novo Defects in Metal-Organic Frameworks Boost CO2 Sorption.

Defects in metal-organic frameworks (MOFs) can significantly change their local microstructures, thus notably leading to an alteration-induced performance in sorption or catalysis. However, achieving de novo defect engineering in MOFs under ambient conditions without the scarification of their crystallinity remains a challenge. Herein, we successfully synthesize defective ZIF-7 through 60Co gamma ray radiation under ambient conditions. The obtained ZIF-7 is defect-rich but also has excellent crystallinity, enhanced BET surface area, and hierarchical pore structure. Moreover, the amount and structure of these defects within ZIF-7 were determined from the two-dimensional (2D) 13C-1H frequency-switched Lee-Goldburg heteronuclear correlation (FSLG-HETCOR) spectra, continuous rotation electron diffraction (cRED), and high-resolution transmission electron microscopy (HRTEM). Interestingly, the defects in ZIF-7 all strongly bind to CO2, leading to a remarkable enhancement of the CO2 sorption capability compared with that synthesized by the solvothermal method.

Near-Unity Energy Transfer from Uranyl to Europium in a Heterobimetallic Organic Framework with Record-Breaking Quantum Yield.

Lanthanide organic frameworks (Ln-MOFs) have attracted increasing research enthusiasm as photoluminescent materials. However, limited luminescence efficiency stemming from restricted energy transfer efficiency from the organic linker to the metal center hinders their applications. Herein, a uranyl sensitization approach was proposed to boost the luminescence efficiency of Ln-MOFs in a distinct heterobimetallic uranyl-europium organic framework. The record-breaking photoluminescence quantum yield (PLQY, 92.68%) among all reported Eu-MOFs was determined to benefit from nearly 100% energy transfer efficiency between UO22+ and Eu3+. Time-dependent density functional theory and ab initio wave-function theory calculations confirmed the overlap of excited state levels between UO22+ and Eu3+, which is responsible for the efficient energy transfer process. Coupled with intrinsically strong stopping power toward X-ray of the uranium center, SCU-UEu-2 features an ultralow detection limit of 1.243 µGyair/s, outperforming the commercial scintillator LYSO (13.257 µGyair/s) and satisfying the requirement of X-ray diagnosis (below 5.5 µGyair/s) in full.

Sequential Water Sorption/Desorption of a Nonporous Adaptive Organic Ligand Bridged Coordination Polymer for Atmospheric Moisture Harvesting.

Moisture harvesters with favourable attributes such as easy synthetic availability and good processability as alternatives for atmospheric moisture harvesting (AWH) are desirable. This study reports a novel nonporous anionic coordination polymer (CP) of uranyl squarate with methyl viologen (MV2+ ) as charge balancing ions (named U-Squ-CP) which displays intriguing sequential water sorption/desorption behavior as the relative humidity (RH) changes gradually. The evaluation of AWH performance of U-Squ-CP shows that it can absorb water vapor under air atmosphere at a low RH of 20 % typical of the levels found in most dry regions of the world, and have good cycling durability, thus demonstrating the capability as a potential moisture harvester for AWH. To the authors' knowledge, this is the first report on non-porous organic ligand bridged CP materials for AWH. Moreover, a stepwise water-filling mechanism for the water sorption/desorption process is deciphered by comprehensive characterizations combining single-crystal diffraction, which provides a reasonable explanation for the special moisture harvesting behaviour of this non-porous crystalline material.

An Aryl-ether-linked Covalent Organic Framework Modified with Thioamide Groups for Selective Extraction of Palladium from Strong Acid Solutions.

Efficient adsorption of palladium ions from acid nuclear waste solution is crucial for ensuring the safety of vitrification process for radioactive waste. However, the limited stability and selectivity of most current adsorbents hinder their practical applications under strong acid and intense radiation conditions. Herein, to address these limitations, we designed and synthesized an aryl-ether-linked covalent organic framework (COF-316-DM) grafted dimethylthiocarbamoyl groups on the pore walls. This unique structure endows COF-316-DM with high stability and exceptional palladium capture capacity. The robust polyarylether linkage enables COF-316-DM to withstand irradiation doses of 200 or 400 kGy of ß/γ ray. Furthermore, COF-316-DM demonstrates fast adsorption kinetics, high adsorption capacity (147 mg g-1 ), and excellent reusability in 4 M nitric acid. Moreover, COF-316-DM exhibits remarkable selectivity for palladium ions in the presence of 17 interference ions, simulating high level liquid waste scenario. The superior adsorption performance can be attributed to the strong binding affinity between the thioamide groups and Pd2+ ions, as confirmed by the comprehensive analysis of FT-IR and XPS spectra. Our findings highlight the potential of COFs with robust linkers and tailored functional groups for efficient and selective capture of metal ions, even in harsh environmental conditions.

Chelation Behaviors of 3,4,3-LI(1,2-HOPO) with Lanthanides and Actinides Implicated by Molecular Dynamics Simulations.

The hydroxypyridinone ligand 3,4,3-LI(1,2-HOPO) (denoted as t-HOPO) is a potential chelator agent for decorporation of in vivo actinides (An), while its coordination modes with actinides and the dynamics of the complexes (An(t-HOPO)) in aqueous phase remain unclear. Here, we report molecular dynamics simulations of the complexes with key actinides (Am3+, Cm3+, Th4+, U4+, Np4+, Pu4+) to study their coordination and dynamic behaviors. For comparison, the complexation of the ligand with a ferric ion and key lanthanides (Sm3+, Eu3+, Gd3+) was also studied. The simulations show that the nature of metal ions determines the properties of the complexes. The t-HOPO in the FeIII(t-HOPO)1- complex ion formed a compact and rigid cage to encapsulate the ferric ion, which was hexa-coordinated. Ln3+/An3+ cations were ennea-coordinated with eight ligating oxygen atoms from t-HOPO and one from an aqua ligand, and An4+ cations were deca-coordinated with a second aqua ligand. The t-HOPO shows strong affinity for metal ions (stronger for An4+ than Ln3+/An3+) benefited from its high denticity and its flexible backbone. Meanwhile, the complexes displayed different dynamic flexibilities, with the AnIV(t-HOPO) complexes more significant than the others, and in the AnIV(t-HOPO) complexes, the fluctuation of the t-HOPO ligand was highly correlated with that of the eight ligating O atoms. This is attributed to the more compact conformation of the ligand, which raises backbone tension, and the competition of the aqua ligand against the t-HOPO ligand in coordinating with the tetravalent actinides. This work enriches our understanding on the structures and conformational dynamics of the complexes of actinides with t-HOPO and is expected to benefit the design of HOPO analogues for actinide sequestering.

Theoretical Insights into the Substitution Effect of Phenanthroline Derivatives on Am(III)/Eu(III) Separation.

Separation of trivalent actinides (An(III)) and lanthanides (Ln(III)) poses a huge challenge in the reprocessing of spent nuclear fuel due to their similar chemical properties. N,N'-Diethyl-N,N'-ditolyl-2,9-diamide-1,10-phenanthroline (Et-Tol-DAPhen) is a potential ligand for the extraction of An(III) from Ln(III), while there are still few reports on the effect of its substituent including electron-withdrawing and electron-donating groups on An(III)/Ln(III) separation. Herein, the interaction of Et-Tol-DAPhen ligands modified by the electron-withdrawing groups (CF3, Br) and electron-donating groups (OH) with Am(III)/Eu(III) ions was investigated using scalar relativistic density functional theory (DFT). The analyses of bond order, quantum theory of atoms in molecules (QTAIM), and molecular orbital (MO) indicate that the substitution groups have a slight effect on the electronic structures of the [M(L-X)(NO3)3] (X = CF3, Br, OH) complexes. However, the thermodynamic results suggest that a ligand with the electron-donating group (L-OH) improves the extraction ability of metal ions, and the ligand modified by the electron-withdrawing group (L-Br) has the best Am(III)/Eu(III) selectivity. This work could render new insights into understanding the effect of electron-withdrawing and electron-donating groups in tuning the selectivity of Et-Tol-DAPhen derivatives and pave the way for designing new ligands modified by substituted groups with better extraction ability and An(III)/Ln(III) selectivity.

Theoretical Insights into the Selectivity of Hydrophilic Sulfonated and Phosphorylated Ligands to Am(III) and Eu(III) Ions.

The separation of lanthanides and actinides has attracted great attention in spent nuclear fuel reprocessing up to date. In addition, liquid-liquid extraction is a feasible and useful way to separate An(III) from Ln(III) based on their relative solubilities in two different immiscible liquids. The hydrophilic bipyridine- and phenanthroline-based nitrogen-chelating ligands show excellent performance in separation of Am(III) and Eu(III) as reported previously. To profoundly explore the separation mechanism, herein, we first of all designed four hydrophilic sulfonated and phosphorylated ligands L1, L2, L3, and L4 based on the bipyridine and phenanthroline backbones. In addition, we studied the structures of these ligands and their neutral complexes [ML(NO3)3] (M = Am, Eu) as well as the thermodynamic properties of complexing reactions through the scalar relativistic density functional theory. According to the changes of the Gibbs free energy for the back-extraction reactions, the phenanthroline-based ligands L2 and L4 have stronger complexing capacity for both Am(III) and Eu(III) ions while the phosphorylated ligand L3 with the bipyridine framework has the highest Am(III)/Eu(III) selectivity. In addition, the charge decomposition analysis revealed a higher degree of charge transfer from the ligand to Am(III), suggesting stronger donor-acceptor interactions in the Am(III) complexes. This study can provide theoretical insights into the separation of actinide(III)/lanthanide(III) using hydrophilic sulfonated and phosphorylated N-donor ligands.

Tetravalent Uranium and Thorium Complexes: Elucidating Disparate Reactivities of AnIVCl2 (An = U, Th) Supported by a Pyridine-Decorated Dianionic Ligand.

Although synthesis, reactivity, and bonding of U(IV) and Th(IV) complexes have been extensively studied, direct comparison of fully analogous compounds is rare. Herein, we report corresponding complexes 1-U and 1-Th, in which U(IV) and Th(IV) are supported by the tetradentate pyridine-decorated dianionic ligand N2NN' (1,1,1-trimethyl-N-(2-(((pyridin-2-ylmethyl)(2-((trimethylsilyl)amino)benzyl)amino)methyl)phenyl)silanamine). Although 1-U and 1-Th are structurally very similar, they display disparate reactivities with TMS3SiK (tris(trimethylsilyl)silylpotassium). The reaction of (N2NN')UCl2 (1-U) and 1 equiv of TMS3SiK in THF unexpectedly formed [Cl(N2NN')U]2O (2-U) featuring an unusual bent U-O-U moiety. In contrast, a salt elimination reaction between (N2NN')ThCl2 (1-Th) and 1 equiv of TMS3SiK led to thorium complex 2-Th, in which the pyridyl group has undergone a 1,4-addition nucleophilic attack. Complex 2-Th serves as a synthon for preparing dimetallic bis-azide complex 3-Th by reaction with NaN3. The complexes were characterized by X-ray crystal diffraction, solution NMR, FT-IR, and elemental analysis. Computations of the formation mechanism of 2-U from 1-U suggest reduced U(III) as a key intermediate for promoting the cleavage of the C-O bonds of THF. The inaccessible nature of Th(III) as an intermediate oxidation state explains the very different reactivity of 1-Th versus 1-U. Given that reactants 1-U and 1-Th and products 2-U and 2-Th all comprise tetravalent actinides, this is an unusual case of very disparate reactivity despite no net change in the oxidation state. Complexes 2-U and 3-Th provide a basis for the synthesis of other dinuclear actinide complexes with novel reactivity and properties.

Theoretical Insights on the Complexation of Americium(III) and Europium(III) with Diglycolamide- and Dimethylacetamide-Functionalized Calix[4]arenes.

Separation of minor actinides from lanthanides is one of the biggest challenges in spent fuel reprocessing due to the similar physicochemical properties of trivalent lanthanides (Ln(III)) and actinides (An(III)). Therefore, developing ligands with excellent extraction and separation performance is essential at present. As an excellent pre-organization platform, calixarene has received more attention on Ln(III)/An(III) separation. In this work, we systematically explored the complexation behaviors of the diglycolamide (DGA)/dimethylacetamide (DMA)-functionalized calix[4]arene extractants for Eu(III) and Am(III) using relativistic density functional theory (DFT). These calix[4]arene-derived ligands were obtained by functionalization with two or four binding units at the narrow edge of the calix[4]arene platform. All bonding nature analyses suggested that the Eu-L complexes possess stronger interaction compared to Am-L analogues, resulting in the higher extraction capacity of the these calix[4]arene ligands toward Eu(III). Thermodynamic analysis demonstrates that these pre-organized ligands on the calix[4]arene platform with four binding units yield better extraction abilities than the single ligands. Although DMA-functionalized ligands show stronger complexation stability for metal ions, in acidic solutions, the calix[4]arene ligands with DGA binding units have better extraction performance for Eu(III) and Am(III) due to the basicity of the DMA ligand. This work enabled us to gain a deeper understanding of the bonding properties between supramolecular ligands and lanthanides/actinides and afford useful insights into designing efficient supramolecular ligands for separating Ln(III)/An(III).