Genome sequencing of Porostereum spadiceum to study the degradation of levofloxacin.

Despite various plans to rationalize antibiotic use, antibiotic resistance in environmental bacteria is increasing due to the accumulation of antibiotic residues in the environment. This study aimed to test the ability of basidiomycete fungal strains to biotransform the antibiotic levofloxacin, a widely-used third-generation broad-spectrum fluoroquinolone, and to propose enzyme targets potentially involved in this biotransformation. The biotransformation process was performed using fungal strains. Levofloxacin biotransformation reached 100% after 9 days of culture with Porostereum spadiceum BS34. Using genomics and proteomics analyses coupled with activity tests, we showed that P. spadiceum produces several heme-peroxidases together with H2O2-producing enzymes that could be involved in the antibiotic biotransformation process. Using UV and high-resolution mass spectrometry, we were able to detect five levofloxacin degradation products. Their putative identity based on their MS2 fragmentation patterns led to the conclusion that the piperazine moiety was the main target of oxidative modification of levofloxacin by P. spadiceum, leading to a decrease in antibiotic activity.

Differential Proteome Profiling Analysis under Pesticide Stress by the Use of a Nano-UHPLC-MS/MS Untargeted Proteomic-Based Approach on a 3D-Developed Neurospheroid Model: Identification of Protein Interactions, Prognostic Biomarkers, and Potential Therapeutic Targets in Human IDH Mutant High-Grade Gliomas.

High-grade gliomas represent the most common group of infiltrative primary brain tumors in adults associated with high invasiveness, agressivity, and resistance to therapy, which highlights the need to develop potent drugs with novel mechanisms of action. The aim of this study is to reveal changes in proteome profiles under stressful conditions to identify prognostic biomarkers and altered apoptogenic pathways involved in the anticancer action of human isocitrate dehydrogenase (IDH) mutant high-grade gliomas. Our protocol consists first of a 3D in vitro developing neurospheroid model and then treatment by a pesticide mixture at relevant concentrations. Furthermore, we adopted an untargeted proteomic-based approach with high-resolution mass spectrometry for a comparative analysis of the differentially expressed proteins between treated and nontreated spheroids. Our analysis revealed that the majority of altered proteins were key members in glioma pathogenesis, implicated in the cellular metabolism, biological regulation, binding, and catalytic and structural activity and linked to many cascading regulatory pathways. Our finding revealed that grade-IV astrocytomas promote the downstream of the mitogen-activated-protein-kinases/extracellular-signal-regulated kinase (MAPK1/ERK2) pathway involving massive calcium influx. The gonadotrophin-releasing-hormone signaling enhances MAKP activity and may serve as a negative feedback compensating regulator. Thus, our study can pave the way for effective new therapeutic and diagnostic strategies to improve the overall survival.

Shotgun Proteomic-Based Approach with a Q-Exactive Hybrid Quadrupole-Orbitrap High-Resolution Mass Spectrometer for Protein Adductomics on a 3D Human Brain Tumor Neurospheroid Culture Model: The Identification of Adduct Formation in Calmodulin-Dependent Protein Kinase-2 and Annexin-A1 Induced by Pesticide Mixture.

Pesticides are increasingly used in combinations in crop protection, resulting in enhanced toxicities for various organisms. Although protein adductomics is challenging, it remains a powerful bioanalytical tool to check environmental exposure and characterize xenobiotic adducts as putative toxicity biomarkers with high accuracy, facilitated by recent advances in proteomic methodologies and a mass spectrometry high-throughput technique. The present study aims to predict the potential neurotoxicity effect of imidacloprid and λ-cyhalothrin insecticides on human neural cells. Our protocol consisted first of 3D in vitro developing neurospheroids derived from human brain tumors and then treatment by pesticide mixture. Furthermore, we adopted a bottom-up proteomic-based approach using nanoflow ultraperformance liquid chromatography coupled with a high-resolution mass spectrometer for protein-adduct analysis with prediction of altered sites. Two proteins were selected, namely, calcium-calmodulin-dependent protein kinase-II (CaMK2) and annexin-A1 (ANXA1), as key targets endowed with primordial roles. De novo sequencing revealed several adduct formations in the active site of 82-ANXA1 and 228-CaMK2 as a result of neurotoxicity, predicted by the added mass shifts for the structure of electrophilic precursors. To the best of our knowledge, our study is the first to adopt a proteomic-based approach to investigate in depth pesticide molecular interactions and their potential to adduct proteins which play a crucial role in the neurotoxicity mechanism.

Trends in microalgal-based systems as a promising concept for emerging contaminants and mineral salt recovery from municipal wastewater.

In the context of climate change leading to water scarcity for many people in the world, the treatment of municipal wastewater becomes a necessity. However, the reuse of this water requires secondary and tertiary treatment processes to reduce or eliminate a load of dissolved organic matter and various emerging contaminants. Microalgae have shown hitherto high potential applications of wastewater bioremediation thanks to their ecological plasticity and ability to remediate several pollutants and exhaust gases from industrial processes. However, this requires appropriate cultivation systems allowing their integration into wastewater treatment plants at appropriate insertion costs. This review aims to present different open and closed systems currently used in the treatment of municipal wastewater by microalgae. It provides an exhaustive approach to wastewater treatment systems using microalgae, integrating the most suitable used microalgae species and the main pollutants present in the treatment plants, with an emphasis on emerging contaminants. The remediation mechanisms as well as the capacity to sequester exhaust gases were also described. The review examines constraints and future perspectives of microalgae cultivation systems in this line of research.

Microbiological and physicochemical quality enhancement of treated wastewater using raw and chemically modified clays from Sidi Bouzid region, Tunisia.

Environmental discharge of wastewater represents a source of chemical and biological pollutants. This study firstly evaluates the microbiological and physicochemical quality of treated wastewaters collected from two wastewater treatment plants (WWTPs) located in two different Tunisian cities namely Sidi Bouzid (SB) and Gafsa (G). Then, the capacity of three raw and acid/base-activated local clays to enhance the quality of wastewaters was assessed. The results indicate that the quantities of enteric bacteria (oscillating from 1.381 × 103 to 1.4 × 108 CFU/100 mL), fungi (between 1.331 × 103 and 1.781 × 104 CFU/100 mL), as well as SARS-CoV-2 (between 4.25 × 103 and 5.05 × 105 CFU/100 mL) and Hepatitis A virus RNA (form 4.25 × 103 to 7.4 × 104 CFU/100 mL) detected in effluent wastewaters were not in compliance with the Tunisian standards for both studied WWTPs. Likewise for other indicators such as electrical conductivity (ranging 4.9-5.4 mS/cm), suspended matter (145-160 g l-1), chemical oxygen demand (123-160 mg l-1), biological oxygen demand 5 (172-195 mg l-1), chloride, Total Kjeldahl nitrogen (TKN) and phosphorus contents (710, 58-66 and 9.47-10.83 mg l-1 respectively), the registered values do not agree with the set standards established for wastewater treatment. On the other hand, the pH values fitted (oscillating from 6.86 (at G) to 7.24 (at SB) with the Tunisian standards for both WWTPs. After treatment, wastewaters showed better values for the microbiological parameters, especially for the clays designed as AM and HJ1, which eliminated 100% of viruses. In addition, when acid-activated AM clays were applied, a marked improvement in the quality of physicochemical parameters was obtained, especially for suspended matter (2 and 4 g l-1 for SB and G, respectively), TKN (5.2 (SB) and 6.40 (G) mg/l), phosphorus (1.01 (SB) and 0.81 (G) mg/l). Our results open perspectives for the possibility of efficiently using these specific clays in the enhancement of the quality of treated wastewaters.

The response surface methodology for optimization of Halomonas sp. C2SS100 lipase immobilization onto CaCO3 for treatment of tuna wash processing wastewater.

An immobilized enzyme could exhibit selectively modified physicochemical properties, and it might offer a better environment for the enzyme activity. In this study, the immobilization yield of crude Halomonas sp. lipase was optimized to improve its stability. Thanks to its high adsorption capacity, CaCO3 has been chosen as support for the immobilization process. Furthermore, response surface methodology (RSM) was used to determine optimal conditions for the immobilization of the bacterial lipase. Five tested factors (enzyme solution, support amount, time, temperature, and acetone volume) were optimized applying a central composite design of RSM. The maximum yield of lipase immobilization was improved to 96%. Furthermore, a biochemical characterization proved a significant improvement of the immobilized lipase stability. The immobilized enzyme is more stable at extreme pH values and high temperatures than the free one. We also tested the reusability of the immobilized lipase by evaluating the recovery of the support using simple filtration. Thanks to its high stability, the immobilized lipase was invested in an effective treatment of tuna wash processing wastewater. The oil biodegradation efficiency was established at 81.5% and was confirmed by Fourier transformation infrared spectrometry. Likewise, the biological oxygen demand values were reduced which makes a possible reduction of the wastewater pollution degree.

Expression and characterization of an organic solvent tolerant recombinant lipase from Staphylococcus capitis SH6 for food wastewater treatment.

The study illustrated here aims on an organic solvent tolerant lipase from Staphylococcus capitis (SCL). The gene part, encoding the mature lipase, was cloned and sequenced. The concluded polypeptide sequence, equivalent to the protein, consist of 388 amino acid residues with a molecular mass of about 45 kDa. A structure-based alignment of the SCL amino acid sequence shows high identities with those many staphylococcal lipases. From this alignment of sequences, the catalytic triad (Ser 117, Asp 308 and His 347) of SCL could be identified. The mature part of the SCL was expressed in Escherichia coli and the recombinant lipase (r-SCL) was purified to homogeneity. The purified r-SCL presented a quite interesting stability at low temperatures (< 30 °C) and the enzyme was found to be highly stable in polar organic solvent and at a pH ranging from 3 to 12. After that, we have demonstrated that the recombinant enzyme may be implicated in the biodegradability of oily wastewater from effluents of fast-food restaurants; the maximum conversion yield into fatty acids obtained at 30 °C, was 65%.

A novel bioprocess combining anaerobic co-digestion followed by ultra-filtration and microalgae culture for optimal olive mill wastewater treatment.

Treatment of olive mill wastewater (OMW) has received considerable research globally due to its influence on the technical, economic, and environmental sustainability of wastewater biogas production. This work presents a novel combined biological process for OMW treatment in terms to produce for the first time, treated OMW and a valuable microalgae biomass. The process involves anaerobic co-digestion (AD), a low cut-off membrane ultra-filtration (UF) and a subsequent Scenedesmus sp. culture. The AD of OMW was conducted at high initial COD ranging from 28 to 38 g/L using an up-flow anaerobic fixed bed bio-reactor (300 L). Results revealed that the maximum biogas production was about 0.507 L/g CODintroduced.day containing 73% of methane corresponding to a methane yield of 0.370 L/g CODintroduced.day obtained at an organic loading rate of 4.58 g COD/L.day. High removal levels of COD, total phenolic compounds, and total suspended solids in the anaerobic liquid digestate (ALD) were achieved after AD and UF. Scenedesmus sp. was then cultivated on the ultra-filtrated ALD. A maximum biomass productivity of 0.15 g/L.day was recorded when Scenedesmus sp. is grown on 25% of ultra-filtrated ALD with a maximum nitrogen removal rate of 15.18 mg/L.day and an almost total elimination of phosphorus and phenolic compounds.

Optimization of an organic solvent-tolerant lipase production by Staphylococcus capitis SH6. Immobilization for biodiesel production and biodegradation of waste greases.

Using the statistical approach, this work seeks to optimize the process parameters to boost the generation of an organic solvent-tolerant lipase by Staphylococcus capitis SH6. The main parameters influencing the enzyme production were identified by using Plackett-Burman's screening design. Among the test variables, only tryptone (25 g/L), malt extract (2.5 g/L), NaCl (10 g/L) and pH (7.0) contributed positively to enzyme production. Then, the crude lipase was immobilized by adsorption on CaCO3 at pH 10. A maximum immobilization efficiency of 82% was obtained by incubating 280 mg of enzyme with CaCO3 (1 g) during 30 min. The immobilized lipase was more stable toward organic solvents than the free enzyme. It retained about 90% of its original activity in the presence of ethanol and methanol. After that, the immobilized enzyme was used for biodiesel production by transesterification process between waste oil and methanol or ethanol during 24 h at 30 °C. Our results show that the lipase can be utilized efficiently in biodiesel industry. Likewise, we have demonstrated that the immobilized enzyme may be implicated in the biodegradability of waste grease; the maximum conversion yield into fatty acids obtained after 12 h at 30 °C, was 57%.

Pistacia lentiscus L. Distilled Leaves as a Potential Cosmeceutical Ingredient: Phytochemical Characterization, Transdermal Diffusion, and Anti-Elastase and Anti-Tyrosinase Activities.

The present work was performed to investigate the phenolic composition of P. lentiscus L. distilled leaves (PDL) and examine its potential against certain key enzymes related to skin aging. High-pressure liquid chromatography coupled to mass spectrometry (HPLC-MS) and various separation procedures combined with nuclear magnetic resonance (NMR) and MS analysis were performed to isolate and identify compounds present in the ethyl acetate extract (EAE) of PDL. A high amount of flavonol glycoside was detected in EAE. Indeed, quercetin-3-O-rhamnoside (FC), myricetin-3-O-rhamnoside (FM2), and kaempferol-3-O-rhamnoside (FB2) were isolated from EAE, and are present in high quantities of 10.47 ± 0.26, 12.17 ± 0.74, and 4.53 ± 0.59 mg/g dry weight, respectively. A transdermal diffusion study was carried out to determine the EAE-molecules that may transmit the cutaneous barrier and showed that FM2 transmits the membrane barrier with a high amount followed by FC. EAE, FM2, and FC were tested against tyrosinase and elastase enzymes. Moreover, intracellular tyrosinase inhibition and cytotoxicity on skin melanoma cells (B16) were evaluated. The results indicated that EAE, FC, and FM2 have important inhibitory activities compared to the well-known standards, at non-cytotoxic concentrations. Therefore, they could be excellent agents for treating skin pigmentation and elasticity problems.

Lipopeptides production by a newly Halomonas venusta strain: Characterization and biotechnological properties.

A halotolerant marine strain PHKT of Halomonas venusta was isolated from contaminated seawater as an efficient biosurfactant producer candidate, on low-value substrate (glycerol). The produced biosurfactants (Bios-PHKT) were characterized as lipopeptides molecules, belonging to surfactin and pumilacidin families, by using Thin Layer Chromatography (TLC), Fourier Transform Infrared Spectroscopy (FT-IR) and Tandem Mass Spectrometry (MALDI-TOF/MS-MS). Bios-PHKT has a critical micelle concentration (CMC) of 125 mg/L, and showed a high steadiness against a wide spectrum of salinity (0-120 g/L NaCl), temperature (4-121 °C) and pH (2-12), supporting its powerful tensioactive properties under various environmental conditions. Likewise, the cytotoxic test revealed that the biosurfactant Bios-PHKT, at concentrations lower than 125 µg/mL, was not cytotoxic for human HEK-293 cells since the cell survival is over than 80%. Furthermore, Bios-PHKT lipopeptides showed excellent anti-adhesive and anti-biofilm activities, being able to avoid and disrupt the biofilm formation by certain pathogenic microorganisms. In addition, the biosurfactant Bios-PHKT showed a remarkable anti-proliferative activity towards tumor B16 melanoma cell line. Besides, Bios-PHKT exhibited an excellent in vitro and in vivo wound healing process. In light of these promising findings, Bios-PHKT could be successfully used in different biotechnological applications.

Investigation of halotolerant marine Staphylococcus sp. CO100, as a promising hydrocarbon-degrading and biosurfactant-producing bacterium, under saline conditions.

A halotolerant strain CO100 of Staphylococcus sp. was isolated from contaminated sediments taken from the fishing harbour of Sfax, Tunisia, as an efficient hydrocarbonoclastic candidate. Strain CO100 exhibited a high capacity to break down almost 72% of the aliphatic hydrocarbons contained in crude oil (1%, v/v), used as the sole carbon and energy source, after 20 days of culture, at 100 g/l NaCl, 37 °C and 180 rpm. The isolate CO100 displayed also its ability to grow on phenanthrene, fluoranthene and pyrene (100 mg/l), at 100 g/l NaCl. Moreover, the isolate CO100 showed a notable aptitude to synthesize an efficient tensioactive agent namely BS-CO100, on low-value substrates including residual frying oil and expired milk powder, thus reducing the high cost of biosurfactant production. The ESI/MS analysis designated that BS-CO100 belonged to lipopeptide class, in particular lichenysin and iturine members. Critical micelle concentrations of BS-CO100 were varying between 65 and 750 mg/l, depending on of the purity of the biosurfactant and the used carbon sources. BS-CO100 showed a high steadiness against a wide spectrum of pH (4.3-12), temperature (4-121 °C) and salinity (0-300 g/l NaCl), supporting its powerful tensioactive properties under various environmental conditions. Likewise, BS-CO100 exhibited no cytotoxic effect toward human HEK293 cells, at concentrations within 125 and 1000 µg/ml. Furthermore, the biosurfactant BS-CO100 exhibited remarkable anti-adhesive and anti-biofilm activities, being able to avoid and disrupt the biofilm formation by certain pathogenic microorganisms. In addition, BS-CO100 was found to have more potential to remove hydrocarbons from contaminated soils, compared to some chemical surfactants. In light of these promising findings, strain CO100, as well as its biosurfactant, could be successfully used in different biotechnological applications including the bioremediation of oil-polluted areas, even under saline conditions.

Effect of olive mill wastewaters on Scenedesmus sp. growth, metabolism and polyphenols removal.

BACKGROUND: The three-phase extraction process of olive oil produces highly contaminated wastewater (OMW). The elimination of this toxic by-product is an important environmental issue that requires the development of an appropriate management solution. The cultivation of microalgae using OMW as growth medium was therefore studied using single (the culture medium was formed by 0% to 80% ultrafiltered olive mill wastewater (OMUF) or OMW added to BG11) and two-stage strategies (microalgae were firstly cultivated in the BG11 medium. In the second stage, 40% and 80% of OMUF and OMW were added to the culture). In this work, biodegradation of OMW and subsequent extraction of lipid and antioxidant molecules was investigated as an ecofriendly method for the bioremediation and valorization of OMW. RESULTS: For two-stage cultivation, OMUF and OMW stress enhanced the intracellular amount of polyphenol accumulated in Scenedesmus sp. and exhibited the highest 2, 2-diphenyl-1- picrylhydrazyl radical (DPPH) and 2,2'-azino-bis (3-ethylbenzoline-6-sulfonate) radical (ABTS) scavenging ability compared with single-stage cultivation. Moreover, the lipid profile is dominated by polyunsaturated acids. In the single-stage cultivation, the Ch a, Ch b, carotenoid, carbohydrate and lipid content of 2.57, 7.4, 1.69, 368, and 644 g kg-1 were observed in 40% OMUF added culture, respectively, along with high biomass productivity and 58% of polyphenol removal. Moreover, the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay showed that the biomass of Scenedesmus sp. cultured on 40% OMUF did not show any toxic effect, making it an efficient strategy. CONCLUSION: The results indicate that Scenedesmus sp. is a promising microalga for the biotreatment of OMW and the extraction of bioactive metabolites. © 2021 Society of Chemical Industry.

Production, characterization and biotechnological potential of lipopeptide biosurfactants from a novel marine Bacillus stratosphericus strain FLU5.

This work aimed at studying the potential of a new hydrocarbonoclastic marine bacterium, Bacillus stratosphericus FLU5, to produce an efficient surface-active agent BS-FLU5. Biosurfactant production was examined on different carbon sources; using the surface tension measurement and the oil displacement test. Strain FLU5 showed its capacity to produce biosurfactants from all tested substrates, in particular the residual frying oil, which is a cheap renewable carbon source alternative, thus minimizing the high cost of producing those surfactants. MALDI-TOF MS/MS analysis confirmed the presence of lipopeptides, which are identified as members of surfactin and pumilacidin series. The critical micelle concentration (CMC) of the purified lipopeptides produced by strain FLU5 was 50 mg/l. At this concentration, the surface tension of the water was reduced from 72 to 28 mN/m. Furthermore, the crude lipopeptides showed an interesting stability against a broad range of pH, temperature and salinity. In addition, the application of BS-FLU5 in oil recovery from hydrocarbons-contaminated soil (used motor oil) showed that it was more effective on the hydrocarbon-remobilization than some tested synthetic surfactants. Interestingly, the biosurfactant BS-FLU5 showed a negligible cytotoxic effect against the mammalian cells HEK293. These results highlight the applicability of the lipopeptides BS-FLU5 in different fields, especially in environmental remediation processes.

A non-toxic microbial surfactant from Marinobacter hydrocarbonoclasticus SdK644 for crude oil solubilization enhancement.

This study aims to investigate the ability of a biosurfactant produced by Marinobacter hydrocarbonoclasticus strain SdK644 isolated from hydrocarbon contaminated sediment to enhance the solubilization rate of crude oil contaminated seawater. Phylogenetic analysis shows that strain SdK644 was very closely related to M. hydrocarbonoclasticus with 16S rRNA gene sequence similarity of 97.44%. Using waste frying oil as inducer carbon source, the producing biosurfactant by strain SdK644 was applied to improve crude oil solubilization in seawater. The preliminary characterization of the produced biosurfactant by FT-IR analysis indicates its possible classification in a glycolipids group. Results from crude oil solubilization assay showed that SdK644 strain biosurfactant was 2-fold greater than Tween 80 surfactant in crude oil solubilization and 12-fold higher than seawater control, as shown by GC-MS analysis of aliphatic compounds. Furthermore, this bioactive compound was shown to be nontoxic against Artemia larvae in short-term acute toxicity bioassay. Generally, the results showed the possible use of M. hydrocarbonoclasticus strain SdK644 biosurfactant in bioremediation processes of the marine environments.

Rhamnolipids from Pseudomonas aeruginosa strain W10; as antibiofilm/antibiofouling products for metal protection.

Industrial biofouling-problems associated with the accumulation of microorganisms from flowing water and fluids on processing surfaces can cause severe problems. A Pseudomonas aeruginosa strain W10 was isolated from industrial setting and found to produce predominantly di-rhamnolipids (Rha-Rha-C10-C10) with a yield of around 10 g L-1 and a critical micelle concentration (CMC) of 80 mg L-1 . P. aeruginosa W10 rhamnolipids were able to disrupt up to 99% of 48 h pre-formed biofilms of the Gram-positive organisms Bacillus licheniformis CAN55, Staphylococcus capitis SH6, and a mixed culture (strains CAN55, SH6, and W10), under static conditions, at concentrations of 0.1, 0.5, and 1 mg ml-1 on a stainless steel surface commonly used in industrial process pipelines. CFU measurements and LIVE/DEAD BacLight staining confirmed these observations. Furthermore, a purified di-rhamnolipid fraction was found to be responsible for the microbial inhibition of B. licheniformis strain CAN55. This study provides evidence that rhamnolipids may have valuable applications in preventing biofilms and biofouling in industrial plants and, in a wider context, may also apply to metal medical devices.

Microbial diversity in polyextreme salt flats and their potential applications.

Recent geological, hydrochemical, and mineralogical studies performed on hypersaline salt flats have given insights into similar geo-morphologic features on Mars. These salt-encrusted depressions are widely spread across the Earth, where they are characterized by high salt concentrations, intense UV radiation, high evaporation, and low precipitation. Their surfaces are completely dry in summer; intermittent flooding occurs in winter turning them into transitory hypersaline lakes. Thanks to new approaches such as culture-dependent, culture-independent, and metagenomic-based methods, it is important to study microbial life under polyextreme conditions and understand what lives in these dynamic ecosystems and how they function. Regarding these particular features, new halophilic microorganisms have been isolated from some salt flats and identified as excellent producers of primary and secondary metabolites and granules such as halocins, enzymes, carotenoids, polyhydroxyalkanoates, and exopolysaccharides. Additionally, halophilic microorganisms are implemented in heavy metal bioremediation and hypersaline wastewater treatment. As a result, there is a growing interest in the distribution of halophilic microorganisms around the world that can be looked upon as good models to develop sustainable biotechnological processes for all fields. This review provides insights into diversity, ecology, metabolism, and genomics of halophiles in hypersaline salt flats worldwide as well as their potential uses in biotechnology.

Investigation on the effect of several parameters involved in the biodegradation of polyethylene (PE) and low-density polyethylene (LDPE) under various seawater environments.

This work investigates the biodegradation of polyethylene (PE) and low-density polyethylene (LDPE) and the leaching of their harmful additives. Micro/macro-plastics of both types were subjected to different laboratory-controlled conditions for 3 months. Gas Chromatography-Mass Spectroscopy (GC-MS) results revealed that leachate concentrations ranged from 0.40 ± 0.07 µg/L to 96.36 ± 0.11 µg/L. It was concluded that the additives' leaching process was promoted by light. However, light was not the only factor examined; microorganisms, pH, salinity, aeration/mixing and temperature influenced the biodegradation process, too. GC-MS results showed a prodigious impact on the biodegradation process when Pseudomonas aeruginosa was added to the artificial seawater compared to plastics exposed to light/air only. Scanning Electron Microscopy (SEM) micrographs demonstrated a significant alteration in the plastics' morphologies. Similarly, Fourier-Transform Infrared Spectroscopy (FTIR) spectra showed obvious changes in plastics characteristic peaks, especially microplastics. Furthermore, it was shown that PE was more susceptible to degradation/biodegradation than LDPE. Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) findings showed that some toxic metals were present in water samples after experiments, with concentrations above the permissible limits. For instance, bio-augmentation/bio-stimulation experiments showed that the concentrations of Pb, Sr, and Zn were 0.59 mg/L, 70.09 mg/L, and 0.17 mg/L, respectively; values above the permissible limits. It is crucial to emphasise that plastics must be meticulously engineered to avoid environmental and human impacts, originated from their degradation by-products. Furthermore, a holistic approach engaging stakeholders, researchers, policymakers, industries and consumers, is essential to effectively tackle the global challenge of marine plastic pollution.

Characterization of the microbial diversity in production waters of mesothermic and geothermic Tunisian oilfields.

The microbial diversity of production waters of five Tunisian oilfields was investigated using Single Strand Conformation Polymorphism (SSCP) technique followed by cloning-sequencing. Dynamics of bacterial populations in production waters collected from four wellheads were also evaluated. For all production water samples collected, DNA from Archaea and Eucarya was not sufficiently abundant to permit detection rRNA genes from these groups by PCR-SSCP. In contrast, the bacterial rRNA genes were detected in all samples, except for samples from DOULEB12 and RAMOURA wells. SSCP profiles attested that two of the studied geothermic wells (ASHTART47 and ASHTART48) had shown a clear change over time, whereas a stable diversity was found with the mesophilic DOULEB well (DL3). PCR amplification of rRNA genes was unsuccessful with samples from DOULEB (DL12) at all three sampling time. The bacterial diversity present in production waters collected from pipelines of SERCINA and LITAYEM oilfields was high, while production waters collected from wellheads (ASHTART and DOULEB) exhibited lower diversity. The partial study of the biodiversity showed a dominance of uncultured bacteria and Pseudomonas genus (class of the Gammaproteobacteria) in three of the studied oilfields (ASHTART47, ASHTART48 and DOULEB3). However, for LITAYEM oilfield, a significant dominance of 5 phyla (Proteobacteria, Thermotogae, Firmicutes, Synergistetes, Bacteroidetes) was shown. Our study gives a real picture of the microbiology of some Tunisian oilfield production waters and shows that some of the sequenced bacterial clones have a great similarity to previous sequenced clones described from other oilfields all over the world, indicating that these ecosystems harbour specific microbial communities. These findings can be considered as an indirect indication of the indigenous origin of these clones.