Stromal Rigidity Stress Accelerates Pancreatic Intraepithelial Neoplasia Progression and Chromosomal Instability via Nuclear Protein Tyrosine Kinase 2 Localization.

Because the mechanotransduction by stromal stiffness stimulates the rupture and repair of the nuclear envelope in pancreatic progenitor cells, accumulated genomic aberrations are under selection in the tumor microenvironment. Analysis of cell growth, micronuclei, and phosphorylated Ser-139 residue of the histone variant H2AX (γH2AX) foci linked to mechanotransduction pressure in vivo during serial orthotopic passages of mouse KrasLSL-G12D/+;Trp53flox/flox;Pdx1-Cre (KPC) cancer cells in the tumor and in migrating through the size-restricted 3-µm micropores. To search for pancreatic cancer cell-of-origin, analysis of single-cell data sets revealed that the extracellular matrix shaped an alternate route of acinar-ductal transdifferentiation of acinar cells into topoisomerase II α (TOP2A)-overexpressing cancer cells and derived subclusters with copy number amplifications in MYC-PTK2 (protein tyrosine kinase 2) locus and PIK3CA. High-PTK2 expression is associated with 171 differentially methylated CpG loci, 319 differentially expressed genes, and poor overall survival in The Cancer Genome Atlas-Pancreatic Adenocarcinoma cohort. Abolished RGD-integrin signaling by disintegrin KG blocked the PTK2 phosphorylation, increased cancer apoptosis, decreased vav guanine nucleotide exchange factor 1 (VAV1) expression, and prolonged overall survival in the KPC mice. Reduction of α-smooth muscle actin deposition in the CD248 knockout KPC mice remodeled the tissue stroma and down-regulated TOP2A expression in the epithelium. In summary, stromal stiffness induced the onset of cancer cells-of-origin by ectopic TOP2A expression, and the genomic amplification of MYC-PTK2 locus via alternative transdifferentiation of pancreatic progenitor cells is the vulnerability useful for disintegrin KG treatment.

Biomechanical analysis of the press-fit effect in a conical Morse taper implant system by using an in vitro experimental test and finite element analysis.

STATEMENT OF PROBLEM: The press-fit (Morse taper) implant system is commonly used to restore edentulous areas. However, abutment screws in this system may be damaged because of the 2- or 3-piece design, consequently causing complications. How these damaging situations occur is unclear. PURPOSE: The purpose of this in vitro and finite element analysis (FEA) study was to elucidate the mechanisms of the press-fit implant system underlying abutment screw damage. MATERIAL AND METHODS: The ANKYLOS implant system was used as a simulation model and for experimental test specimens. The experimental test was performed by using a material test system, and the obtained data were used to validate the FEA outcome. In the FEA simulation, the bilinear material property and nonlinear contact conditions were applied to simulate the process of tightening the abutment screw between the abutment and implant. A force of 300 N was then applied to the abutment to investigate the stress distribution and deformation of the implant system. RESULTS: In the experimental test, the fracture site of all specimens was observed at the abutment-screw thread. All implants and abutments exhibited permanent bending deformation. The results of the FEA simulation generally concurred with the experimental outcomes. CONCLUSIONS: The abutment torque used to generate the press-fit contact interface between the abutment and implant induced stresses within the implant components, substantially increasing the failure probability of the conical implant system during function.

AQP4 Attenuated TRAF6/NFκB Activation in Acrylamide-Induced Neurotoxicity.

Acrylamide (ACR) is present in high-temperature-processed high-carbohydrate foods, cigarette smoke, and industrial pollution. Chronic exposure to ACR may induce neurotoxicity from reactive oxygen species (ROS); however, the mechanisms underlying ACR-induced neurotoxicity remain unclear. We studied 28-day subacute ACR toxicity by repeatedly feeding ACR (0, 15, or 30 mg/kg) to rats. We conducted RNA sequencing and Western blot analyses to identify differences in mRNA expression in the blood and in protein expression in the brain tissues, respectively, of the rats. AQP4 transient transfection was performed to identify potential associations with protein regulation. The rats treated with 30 mg/kg ACR exhibited hind-limb muscle weakness. Matrix metalloproteinase (MMP9) expression was higher in the ACR-treated group than in the control group. ACR induced MMP-9 and AQP4 protein expression in the brain tissues of the rats, which subsequently presented with neurotoxicity. In the in vitro study, Neuro-2a cells were transiently transfected with AQP4, which inhibited MMP-9 and TNF receptor-associated factor 6 (TRAF6) expression, and inhibited ACR induced expression of TRAF6, IκBα, and nuclear factor κB (NFκB). Using a combination of in vivo and in vitro experiments, this study revealed that depressive symptoms associated with ACR-induced neurotoxicity are associated with downregulation of AQP4 and induction of the TRAF6 pathway.

Verification of the Efficacy of New Diagnostic Criteria for Retropharyngeal Nodes in a Cohort of Nasopharyngeal Carcinoma Patients.

Purpose: A multistage approach to diagnose lateral retropharyngeal nodes (LRPNs) of nasopharyngeal carcinoma (NPC) had been proposed and warranted for validation. Methods: Between 2012 and 2017, the patients with newly diagnosed NPC were enrolled. The responsive nodes or those that progressed during follow-up were positive. The criteria for the multistage approach delimited LRPNs with a minimal axial diameter (MIAD) ≥ 6.1 mm were assessed as positive and if the mean standard uptake value ≥ 2.6, or if the maximal coronal diameter ≥ 25 mm and maximal axial diameter ≥ 8 mm with nodes MIAD < 6.1 mm were also considered as positive. The outcomes were compared with the MIAD cutoff value ≥ 6 mm (traditional method). A chi-squared test was used to compare two areas under the curve of the receiver operating characteristic curves. Results: A total of 67 eligible NPC cases and 155 LRPNs (72 positive and 83 negative) were analyzed. The accuracy, specificity, and sensitivity of the traditional method were 0.91, 0.93, and 0.89, respectively. The values for the multistage approach all reached 0.94. The area under the curve was significantly greater for the multistage approach compared with the traditional method (p = 0.023). Conclusion: The results support the advantage of the multistage approach.

Role of an additional third screw in the fixation of transverse patellar fracture with two parallel cannulated screw and anterior wire.

BACKGROUND: Two parallel cannulated screws along with an anterior wire to construct a tension band is a popular approach in transverse patellar fractures. However, the optimal screw proximity, either deep or superficial screw placements, remains controversial. Hence, a new concept of the addition of a third screw to form a triangular configuration along with the original two parallel screws was proposed in this study. Therefore, the biomechanical effect of the additional third screw on the stability of the fractured patella was investigated with finite element (FE) simulation. METHODS: An FE knee model including the distal femur, proximal tibia, and fractured patella (type AT/OTA 34-C) was developed in this study. Four different screw configurations, including two parallel cannulated screws with superficial (5-mm proximity) and deep (10-mm proximity) placements and two parallel superficial screws plus a third deep screw, and two parallel deep screws plus a third superficial screw, with or without the anterior wire, were considered for the simulation. RESULTS: Results indicated that the addition of a third screw increased stability by reducing the dorsal gap opening when two parallel screws were deeply placed, particularly on the fractured patella without an anterior wire. However, the third screw was of little value when two parallel screws were superficially placed. In the existence of two deep parallel screws and the anterior wire, the third screw reduced the gap opening by 23.5% (from 1.15 mm to 0.88 mm) and 53.6% (from 1.21 mm to 0.61 mm) in knee flexion 45° and full extension, respectively. Furthermore, in the absence of the anterior wire, the third screw reduced the gap opening by 73.5% (from 2 mm to 0.53 mm) and 72.2% (from 1.33 mm to 0.37 mm) in knee flexion 45° and full extension, respectively. CONCLUSION: Based on the results, a third cannulated screw superficially placed (5-mm proximity) is recommended to increase stability and maintain contact of the fractured patella, fixed with two parallel cannulated screws deeply placed (10-mm proximity), particularly when an anterior wire was not used. Furthermore, the third screw deeply placed is not recommended in a fractured patella with two parallel superficial screws.

Biomechanical investigation of dynamic hip screw and wire fixation on an unstable intertrochanteric fracture.

BACKGROUND: Although use of a dynamic hip screw (DHS) for stable intertrochanteric hip fracture fixation has been successfully applied in fracture healing for more than 20 years, DHS fixation on unstable intertrochanteric fractures still has a high failure rate, especially in patients with osteoporosis. Although the wire fixation is usually incorporated with orthopedic device to treat fracture, the wiring techniques are developed through experiences. Thus, this study is objective to investigate the biomechanical property of different wire fixation methods incorporated with DHS system to provide the lesser trochanter fragment stable fixation on osteoporotic TypeA2.1 fracture for enhancing stability after bone reduction. RESULTS: Sawbone testing results demonstrated higher maximum load, stiffness, and energy in a DHS with wire fixation compared with DHS fixation only. In static biomechanical testing of a cadaver femur, we compared the stiffness of five fixation models and then tested a fatigue failure model in cycle loading with DHS fixation only. Wiring fixation can enhance stability and the cut-out failure model in the fatigue test was identical to the clinical failure model. CONCLUSIONS: Lesser trochanteric fragment fixation is a crucial concern in the stability of an A2.1 unstable fracture, and the combination of a wiring technique with a DHS seems beneficial for achieving better stability. The addition of an antirotational greater trochanter is likely to enhance stability through wiring of the greater trochanter.

Roles of the screw types, proximity and anterior band wiring in the surgical fixation of transverse patellar fractures: a finite element investigation.

BACKGROUND: Cannulated screws with an anterior wire are currently used for managing transverse patellar fracture. However, the addition of anterior wiring with various types of screws via open surgery to increase the mechanical stability is yet to be determined. Hence, this study aimed to compare the mechanical behaviors of a fractured patella fixed with various screws types and at various screw locations with and without the anterior wire. The present study hypothesized that using the anterior wire reduces the fracture gap formation. METHODS: A finite element (FE) model containing a fractured patella fixed with various types of cannulated screws and anterior wiring was created in this study. Three types of screws, namely partial thread, full thread, and headless compression screws, and two screw depths, namely 5 and 10 mm away from the anterior surface of the patella, were included. The effect of the anterior wire was clarified by comparing the results of surgical fixation with and without the wire. Two magnitudes and two loading directions were used to simulate and examine the mechanical responses of the fractured patella with various fixation conditions during knee flexion/extension. RESULTS: Compared with partial thread and headless compression screws, the full thread screw increased the stability of the fractured patella by reducing fragment displacement, fracture gap formation, and contact pressure while increasing the contact area at the fracture site. Under 400-N in the direction 45°, the full thread screw with 5-mm placement reduced the gap formation by 86.7% (from 2.71 to 0.36 mm) and 55.6% (from 0. 81 to 0. 36 mm) compared with the partial thread screw with 10-mm placement, respectively without and with the anterior wire. CONCLUSION: The anterior wire along with the full thread screw is preferentially recommended for maintaining the surgical fixation of the fractured patella. Without the use of anterior wiring, the full thread screw with 5-mm placement may be considered as a less invasive alternative; however, simple screw fixation at a deeper placement (10 mm) is least recommended for the fixation of transverse patellar fracture.

Mechanical analysis of a dental implant system under 3 contact conditions and with 2 mechanical factors.

STATEMENT OF PROBLEM: A unidiameter abutment attached to a large-diameter implant has been reported to result in an unexpectedly high failure rate, inconsistent with the general understanding of dental implant mechanics. PURPOSE: The purpose of this finite element analysis study was to investigate the mechanical mechanism underlying these unexpected failures with the hypothesis that the cold welding or interference fit interface between abutment and implant increases the failure probability of a large-diameter implant system with a unidiameter abutment. MATERIAL AND METHODS: A conical implant system with different abutment gingival heights and implant diameters was analyzed for 3 contact conditions of the abutment-implant interface (bond and frictional coefficients of 0.3 and 0.7). A computer model was created using computed tomography images, and an oblique load of 100 N was applied to the abutment to determine the mechanical effect of the implant diameter and gingival height under the 3 contact conditions. RESULTS: When the abutment-implant interface was bonded, the peak stress of the abutment increased and that of the bone decreased with increasing implant diameter. When friction was applied to the abutment-implant interface, the peak stress of the implant, screw, and bone decreased with increasing implant diameter. Furthermore, the peak stress of the implant system and bone increased when the abutment gingival height increased under all contact conditions. CONCLUSIONS: Cold wielding or interference fit at the abutment-implant interface can prevent a screw fracture; however, it puts high stress on the unidiameter abutment neck when the implant diameter is increased. Screw loosening may lead to a slide between the abutment and implant, considerably increasing the stress of the screw. A system with a narrow diameter implant may cause an implant fracture rather than an abutment fracture when friction is applied to the abutment-implant interface.

Litter quality, dispersal and invasion drive earthworm community dynamics and forest soil development.

In temperate deciduous forests of eastern USA, most earthworm communities are dominated by invasive species. Their structure and functional group composition have critical impacts on ecological properties and processes. However, the factors determining their community structure are still poorly understood, and little is known regarding their dynamics during forest succession and the mechanisms leading to these changes. Earthworm communities are usually assumed to be stable and driven by vegetation. In contrast, the importance of dispersal and ecological drift is seldom acknowledged. By analyzing a 19-year dataset collected from forest stands in eastern USA, we demonstrated that on a decadal timescale, earthworm community dynamics are shaped by the interplay of selection, dispersal, and ecological drift. We highlighted that forests at different successional stages have distinct earthworm species and functional groups as a result of environmental filtering through leaf litter quality. Specifically, young forests are characterized by soil-feeding species that rely on relatively fresh soil organic matter derived from fast-decomposing litter, whereas old forests are characterized by those feeding on highly processed soil organic matter derived from slow-decomposing litter. In addition, year-to-year species gains and losses are primarily driven by dispersal from regional to local species pools, and by local extinction resulted from competition and ecological drift. We concluded that with continued dispersal of European species and the recent "second wave" of earthworm invasion by Asian species from the surrounding landscape, earthworms at the investigated forests are well-established, and will remain as the major drivers of soil development for the foreseeable future.

Numerical investigation of fracture impaction in proximal humeral fracture fixation with locking plate and intramedullary nail.

INTRODUCTION: Fracture impaction is a surgical technique used to support the fractured humerus with locking plate or intramedullary nail when treating proximal humeral fractures. However, few studies have investigated the mechanical difference between fracture impaction with locking plate and with intramedullary nail. The mechanism of fracture impaction to increase stability is still unclear. The aim of this study was to use numerical methods to compare the biomechanical effect of treating proximal humeral fracture. METHODS: Six different humerus models, including intact and fractured humeri with various fixation patterns were used in this study. Fracture impaction was simulated by moving the distal fragment of the humeral shift upwards directly until touching the inferior surface of the proximal fragment. We also considered both poor- and normal-quality bone in the simulation. RESULTS: Results confirmed that fracture impaction increases fracture stabilityand decreases peak stress in both implant and bone. Also, fracture impaction and plating with medial shift of the humeral shaft provides the highest stability. The metallic implant shared loading with the bone in the impacted models, while implants sustained all the loading alone in the nonimpacted models. CONCLUSIONS: Based on the results, the technique of fracture impaction is suggested for both nail and plate to reduce stresses on bone and implants and to increase structural stability. Furthermore, impaction with medial shift of the humeral shaft with plate is found to achieve the highest stability when treating proximal humeral fractures.

Belowground competition among invading detritivores.

The factors regulating soil animal communities are poorly understood. Current theory favors niche complementarity and facilitation over competition as the primary forms of non-trophic interspecific interaction in soil fauna; however, competition has frequently been suggested as an important community-structuring factor in earthworms, ecosystem engineers that influence belowground processes. To date, direct evidence of competition in earthworms is lacking due to the difficulty inherent in identifying a limiting resource for saprophagous animals. In the present study, we offer the first direct evidence of interspecific competition for food in this dominant soil detritivore group by combining field observations with laboratory mesocosm experiments using 13C and 15N double-enriched leaf litter to track consumption patterns. In our experiments, the Asian invasive species Amynthas hilgendorfi was a dominant competitor for leaf litter against two European species currently invading the temperate deciduous forests in North America. This competitive advantage may account for recent invasion success of A. hilgendorfi in forests with established populations of European species, and we hypothesize that specific phenological differences play an important role in determining the outcome of the belowground competition. In contrast, Eisenoides lonnbergi, a common native species in the Eastern United States, occupied a unique trophic position with limited interactions with other species, which may contribute to its persistence in habitats dominated by invasive species. Furthermore, our results supported neither the hypothesis that facilitation occurs between species of different functional groups nor the hypothesis that species in the same group exhibit functional equivalency in C and N translocation in the soil. We propose that species identity is a more powerful approach to understand earthworm invasion and its impacts on belowground processes.

Biomechanical evaluation of a novel wheelchair backrest for elderly people.

BACKGROUND: Back pain is a common complication of wheelchair-bound elderly people. Seating system is a key factor that influences spinal curvature, back muscle activation, interface pressure, and comfortability. A seating system can maintain lumbar lordosis, lower back muscle activity, and decrease ischial tuberosities pressure, which reduces spinal load and directly influences sitting comfort. Our previous study has confirmed that backward thoracic support showed a relatively higher lumbar lordosis and lower back muscle activity. This study intends to evaluate the influence of backward thoracic support on interface pressure and subjective discomfort. METHODS: In this study, 18 elderly men were recruited to participate in a random comparison involving 4 sitting postures. These postures comprised relaxed slouching, flat back support, prominent lumbar support, and backward thoracic support sitting. All parameters, including interface pressure (total contact area, average pressure, and peak pressure on backrest and seat) and subjective discomfort (upper-back, mid-back, lower-back, buttocks, and thighs) were measured and compared. RESULTS: The results showed that compared with other sitting postures, backward thoracic support sitting significantly reduced average pressure and peak pressure on seat and increased average pressure and peak pressure on backrest. Concurrently, subjective discomfort in the upper-back, mid-back, lower-back, and buttocks were reduced. CONCLUSIONS: The results confirmed that backward thoracic support can maintain favorable wheelchair sitting posture, thereby preventing or reducing the risks of back pain. However, this study was no evaluations on shear forces on butts and neck postures. Future studies investigating shear forces on butts and neck postures are required.

Outcomes after minimally invasive lumbar decompression: a biomechanical comparison of unilateral and bilateral laminotomies.

BACKGROUND: The unilateral approach for bilateral decompression was developed as an alternative to laminectomy. Unilateral laminotomy has been rated technically considerably more demanding and associated with more perioperative complications than bilateral laminotomy. Several studies have indicated that bilateral laminotomy are associated with a substantial benefit in most outcome parameters and thus constituted a promising treatment alternative. However, no complete kinematic data and relative biomechanical analysis for evaluating spinal instability treated with unilateral and bilateral laminotomy are available. Therefore, the purpose of this study was to compare the stability of various decompression methods. METHODS: Ten porcine lumbar spines were biomechanically evaluated regarding their strain and range of motion, and the results were compared following unilateral or bilateral laminotomies and laminectomy. The experimental protocol included flexion and extension in the following procedures: intact, unilateral or bilateral laminotomies (L2-L5), and full laminectomy (L2-L5). The spinal segment kinematics was captured using a motion tracking system, and the strain was measured using a strain gauge. RESULTS: No significant differences were observed during flexion and extension between the unilateral and bilateral laminotomies, whereas laminectomy yielded statistically significant findings. Regarding strain, significant differences were observed between the laminectomy and other groups. These results suggest that laminotomy entails higher spinal stability than laminectomy, with no significant differences between bilateral and unilateral laminotomies. CONCLUSIONS: The laminectomy group exhibited more instability, including the index of the range of motion and strain. However, bilateral laminotomy seems to have led to stability similar to that of unilateral laminotomy according to our short-term follow-up. In addition, performing bilateral laminotomies is easier for surgeons than adopting a unilateral approach for bilateral decompression. The results provide recommendations for surgeons regarding final decision making. Future studies conducting long-term evaluation are required.

Earthworms from Matsu, Taiwan with descriptions of new species of the genera Amynthas (Oligochaeta: Megascolecidae) and Drawida (Oligochaeta: Moniligastridae).

In 2012, we conducted earthworm surveys in Matsu Islands, and described five new species of the genera Amynthas and Metaphire and reported two new records, Desmogaster sinensis Gates, 1930 and Ocnerodrilus occidentalis Eisen, 1878. This paper describes three new species, one of them with two new subspecies, Amynthas nanganensis nanganensis sp. nov. et ssp. nov. and Amynthas nanganensis beiganensis ssp. nov., Drawida beiganica sp. nov. and Drawida dongyinica sp. nov., provides a new record of Drawida koreana Kobayashi, 1938 from the remaining specimens collected in the surveys, reports DNA barcodes (the 5' end sequences of the mitochondrial cytochrome c oxidase subunit 1 gene) from type specimens and further reference specimens of the new species, and lists a total of 27 earthworm species and subspecies found from Matsu Islands. Pheretimoid earthworms made up 66.7% of the total number of the species, with Metaphire matsuensis Shen, 2014 and Metaphire californica (Kinberg, 1867) the most dominant. Our findings indicate that the earthworm fauna of Matsu Islands is more closely related to that of warm temperate China than to Taiwan or tropical southern China.

Effect of ankle kinesio taping on vertical jump with run-up and countermovement jump in athletes with ankle functional instability.

[Purpose] Limited research has been performed in spite of biomechanical evaluation of jump landing with kinesio taping. Therefore, the main objective of this study was to evaluate the effect of kinesio taping applied to athletes. In this study, the authors wished to investigate the effect of kinesio taping during a vertical jump with run-up and countermovement jump on ankle functional instability. [Subjects and Methods] Ten male athletes with ankle functional instability (FI) were recruited in this study from a college volleyball team. Each participant was requested to perform two tasks, the countermovement jump and vertical jump with run-up. Infrared high-speed cameras and force plates were used to assess the effect of ankle taping. [Results] The results showed that the peak ground reaction force in the sagittal plane during a vertical jump with run-up slowed down after kinesio taping and that the peak ankle plantar flexion moment in both types of jump also decreased. [Conclusion] In conclusion, this study proved the effect of kinesio taping on ankle functional instability, which was evaluated by measuring the vertical ground reaction force and peak plantar flexion moment. Its finding may allow us to provide some recommendations for athletes and trainers.

Predicting the holistic force-displacement relation of the periodontal ligament: in-vitro experiments and finite element analysis.

BACKGROUND: The biomechanical property of the periodontal ligament (PDL) is important in orthodontics and prosthodontics. The objective of this study was to evaluate the feasibility of measuring the biomechanical behavior of the periodontal ligament using micro-computed tomography (micro-CT). METHODS: A custom-made apparatus measured the force and displacement of a porcine PDL specimen within the micro-CT environment. Synchronized computed tomography (CT) images were used to obtain the deformation and displacement of the entire specimen and to reconstruct the three-dimensional mesh model. To match the experimental results, finite element analysis was then applied to simulate the biomechanical response of the PDL. The mechanical model of the PDL was assumed as the hyperelastic material in this study. RESULTS: The volume variations of the tooth and the alveolar bone were less than 1%, which implies that tooth displacement was caused mostly by displacement of the PDL. Only translational displacement was observed with each load step because the transformation matrix acquired from the CT image registration was identical. The force-displacement curve revealed the nonlinear behavior of the PDL. There was a high correlation between the experimental displacement results and the simulation displacement results. The numerical results (based on the assumption that the PDL is the hyperelastic material) showed good agreement with the experimental results. CONCLUSIONS: Nondestructive measurements by micro-CT obtained the biomechanical behavior of the PDL. Using the hyperelastic characteristic as the constitutive model can properly predict the force-displacement relation of the PDL after loading. This study provided a feasible approach for measuring the biomechanical behavior of the PDL for further dental application.

Surgical treatment for total root avulsion type brachial plexus injuries by neurotization: a prospective comparison study between total and hemicontralateral C7 nerve root transfer.

PURPOSE: We conducted a clinical study to evaluate the effects of neurotization, especially comparing the total contralateral C7 (CC7) root transfer to hemi-CC7 transfer, on total root avulsion brachial plexus injuries (BPI). METHODS: Forty patients who received neurotization for BPI were enrolled in this prospective study. Group 1 (n = 20) received hemi-CC7 transfer for hand function, while group 2 (n = 20) received total-CC7 transfer. Additional neurotization included spinal accessory, phrenic, and intercostal nerve transfer for shoulder and elbow function. The results were evaluated with an average of 6 years follow-up. RESULTS: Group 1 had fewer donor site complications (15%) than group 2 (45%); group 2 had significantly better hand M3 and M4 motor function (65%) than group 1 (30%; P = 0.02). There was no difference in sensory recovery. Significantly, better shoulder function was obtained by simultaneous neurotization on both suprascapular and axillary nerves. CONCLUSIONS: Total-CC7 transfer had better hand recovery but more donor complications than hemi-CC7. Neurotization on both supra-scapular and axillary nerves improved shoulder recovery.

New species of earthworms belonging to the Metaphire formosae species group (Clitellata: Megascolecidae) in Taiwan.

The Metaphire formosae species group is a member of the Pheretima complex of the family Megascolecidae. It is composed of 12 nominal taxa, Metaphire bununa Tsai et al., 2000, Metaphire feijani Chang & Chen, 2004, Metaphire formosae (Michaelsen, 1922), Metaphire glareosa Tsai et al., 2000, Metaphire nanaoensis Chang & Chen, 2005, Metaphire paiwanna paiwanna Tsai et al., 2000, Metaphire paiwanna hengchunensis (James et al., 2005), Metaphire paiwanna liliumfordi Tsai et al., 2000, Metaphire tahanmonta Chang & Chen, 2005, Metaphire taiwanensis Tsai et al., 2004, Metaphire trutina Tsai et al., 2003, and Metaphire yuhsi (Tsai, 1964). In this study, we describe a new species, Metaphire tengjhihensis sp. nov., and two new subspecies, Metaphire nanaoensis truku ssp. nov. and Metaphire taiwanensis tsaii ssp. nov., belonging to this species group. DNA barcodes (partial sequences of the mitochondrial cytochrome c oxidase subunit 1, COI) from type specimens of M. feijani, M. tengjhihensis sp. nov., M. nanaoensis truku ssp. nov., M. tahanmonta and M. taiwanensis tsaii ssp. nov. have been deposited in GenBank in previous studies and are explicitly linked to the type specimens for the first time, enabling unambiguous identification using both morphology and DNA barcodes. Finally, we comment on the systematics of the M. formosae species group and suggest an integrative taxonomic approach that combines morphology and DNA barcodes for future descriptions of new species of Amynthas and Metaphire.

A review of the earthworm Amynthasmasatakae (Beddard, 1892) (Clitellata, Megascolecidae), with designation of two new synonyms.

Correct and timely identification of an invasive species during quarantine or at an early stage of invasion before establishment or spread is critical for preventing biological invasions. However, taxonomic confusion of potential invasive earthworm species caused by incorrect taxonomic treatment or reckless taxonomic work has made it difficult to properly recognize potential invasion threats. Through analyzing publicly available DNA sequences of the mitochondrial cytochrome c oxidase subunit I (COI) gene, we confirmed the validity of the specific status of Amynthasmasatakae (Beddard, 1892), a peregrine earthworm species in East Asia with the potential to spread to other regions of the world, and designated two new synonyms of A.masatakae: Amynthastralfamadore Blakemore, 2012 syn. nov. and Amynthasscaberulus Sun and Jiang, 2021 syn. nov. Additionally, the name A.triastriatususualis Dong, Jiang, Yuan, Zhao and Qiu, 2020 is nomenclaturally unavailable since it was published in an electronic journal without ZooBank registration and an explicit statement establishing a new nominal taxon. Specimens described under this unavailable name actually belong to A.masatakae. Inadequate literature review and erroneous species identities associated with sequences in GenBank have caused even more problems in the already confusing earthworm taxonomy.