Genetics in neovascular age-related macular degeneration susceptibility and treatment response to anti-VEGF intravitreal injection: A case series study.

BACKGROUND: To identify genotypes associated with neovascular age-related macular degeneration (nAMD) and investigate the associations between genotype variations and anti-vascular endothelial growth factor (VEGF) treatment response. METHODS: This observational, retrospective, case series study enrolled patients diagnosed with nAMD who received anti-VEGF treatment in National Taiwan University Hospital with at least one-year follow-up between 2012 and 2020. A genome-wide association study (GWAS) was conducted on enrolled patients and controls. Correlations between the genotypes identified from GWAS and the treatment response of functional/anatomical biomarkers, including visual acuity (VA), presence of intraretinal or subretinal fluid (SRF), serous or fibrovascular pigmented epithelium detachment (PED), and disruption of the ellipsoid zone (EZ), were analysed. RESULTS: In total, 182 patients with nAMD and 1748 controls were enrolled. GWAS revealed 16 single nucleotide polymorphisms (SNPs) as risk loci for nAMD, including seven loci in CFH and ARMS2/HTRA1 and nine novel loci, including rs117517872 and rs79835234(COPB2-DT), rs7525578(RAP1A), rs2123738(LOC105376755), rs1374879(CNTN3), rs3812692(SAR1A), rs117501587(PRKCA), rs9965945(CNDP1), and rs189769231(MATK). Our study revealed rs800292(CFH), rs11200638(HTRA1), and rs2123738(LOC105376755) correlated with poor treatment response in VA (P = 0.005), SRF (P = 0.044), and fibrovascular PED (P = 0.007), respectively. Rs9965945(CNDP1) was correlated with poor response in disruption of EZ (P = 0.046) and serous PED (P = 0.049). CONCLUSIONS: Among the 16 SNPs found in the GWAS, four loci-CFH, ARMS2/HTRA1, and two novel loci-were correlated with the susceptibility of nAMD and anatomical/functional responses after anti-VEGF treatment.

A two-stage cultivation process for the growth enhancement of Chlorella vulgaris.

This study proposes a two-stage cultivation process with an autotrophic growth followed by a mixotrophic process. The results indicated that a two-stage cultivation process using a daily dose of 3 g/L of glucose could achieve 7.4 g/L of biomass, which was about a 64 % increase over simple autotrophic cultivation. In the second stage of mixotrophic cultivation, glucose was regarded as a better carbon source for cell growth, than was glycerol. Linoleic acid (C18:2) would be the primary component in the two-stage cultivation as in the autotrophic cultivation. Even carbon source was provided in the second stage of mixotrophic cultivation; lower light intensity limited the mixotrophic growth, which indicated that photosynthesis still plays an important role in the second stage of mixotrophical cultivation. The final biomass was higher after this two-stage cultivation process, which made it suitable for application in the production scale-up of algal biomass.

CCN3 increases BMP-4 expression and bone mineralization in osteoblasts.

The nephroblastoma overexpressed (NOV) gene, also called CCN3, regulates differentiation of skeletal mesenchymal cells. Bone morphogenetic proteins (BMPs) play important roles in osteoblast differentiation and bone formation, but the effects of CCN3 on BMP expression and bone formation in cultured osteoblasts are largely unknown. Here we found that CCN3 increased BMP-4 expression and bone nodule formation in cultured osteoblast. Monoclonal antibodies for α5ß1 and αvß5 integrins, and inhibitors of integrin-linked kinase (ILK), p38, and JNK, all inhibited CCN3-induced bone nodule formation and BMP-4 up-regulation of osteoblasts. CCN3 stimulation increased the kinase activity of ILK and phosphorylation of p38 and JNK. Inhibitors of activator protein-1 (AP-1) also suppressed bone nodule formation and BMP-4 expression enhanced by CCN3. Moreover, CCN3-induced c-Jun translocation into the nucleus, and the binding of c-Jun to the AP-1 element on the BMP-4 promoter were both inhibited by specific inhibitors of the ILK, p38, and JNK cascades. Taken together, our results provide evidence that CCN3 enhances BMP-4 expression and bone nodule formation in osteoblasts, and that the integrin receptor, ILK, p38, JNK, and AP-1 signaling pathways may be involved.

Application of the stabilization method to temporary anion states of CH3CN, CH3NC, CH3SCN, and CH3NCS in density functional theory with asymptotically corrected potentials.

In this paper, density functional theory (DFT) with asymptotically corrected potentials is used to investigate CH(3)CN, CH(3)NC, CH(3)SCN, and CH(3)NCS molecules. For the energies of σ* and π* temporary anion states, the stabilized Koopmans' theorem (S-KT) using long-range correction functional and stabilized Koopmans-based (S-KB) approximation using local functional, are adopted. The stabilization procedure is accomplished by varying the exponents of appropriate diffuse functions. Results indicate that the calculations based on asymptotically corrected density functionals can yield better energy results of temporary anion states over conventional DFT methods.

Bradykinin enhances cell migration in human chondrosarcoma cells through BK receptor signaling pathways.

Bradykinin (BK) is an inflammatory mediator, and shows elevated levels in regions of severe injury and inflammatory diseases. BK has recently been shown to be involved in carcinogenesis and cancer progression. In this study, we found that BK increased the migration and the expression of alpha2beta1 integrin in human chondrosarcoma cells. We also found that human chondrosarcoma tissues had significantly higher expression of the B1 and B2 receptors comparing to normal cartilage. BK-mediated migration and integrin up-regulation was attenuated by B1 and B2 BK receptor siRNA or antagonist. Activations of phospholipase C (PLC), protein kinase Cdelta (PKCdelta), and NF-kappaB pathways after BK treatment was demonstrated, and BK-induced integrin expression and migration activity was inhibited by the specific inhibitor of PLC, PKCdelta, and NF-kappaB cascades. Taken together, our results indicated that BK enhances the migration of chondrosarcoma cells by increasing alpha2beta1 integrin expression through the BK receptors/PLC/PKCdelta/NF-kappaB signal transduction pathway.

Application of the stabilization method to temporary anion states of pi-ligand transition-metal carbonyls in density functional theory.

In this paper, density functional theory is used to investigate (benzene)chromium tricarbonyl, (cyclopentadienyl)manganese tricarbonyl, (1,3-butadiene)iron tricarbonyl, and (cyclopentadienyl)cobalt dicarbonyl. For the energies of low-lying temporary anion states, the stabilized Koopmans-based (S-KB) and stabilized Koopmans theorem (S-KT) methods are adopted. Stabilization is accomplished by varying the exponents of appropriate diffuse functions. Results indicate that the calculations of S-KB using PBEPBE and S-KT using CAM-B3LYP are able to yield energies of temporary anion states in good agreement with the experimental values. Furthermore, the ionization potentials can be determined accurately via the Koopmans-based (KB) PBEPBE method.

Temporary anion states of ferrocene and dibenzene chromium using stabilization method in density functional theory.

The Koopmans-based (KB) approximation is used to investigate the ionization potentials of ferrocene and dibenzene chromium in density functional theory. As to the energies of low-lying temporary anion states of these transition metal complexes, the stabilization method coupled with KB approximation (S-KB) is adopted. Here, the stabilization is accomplished by varying the exponents of appropriate diffuse functions. Results indicate that the S-KB method is much more successful than other methods in predicting absolute and relative energies of temporary anion states. Furthermore, the ionization potentials via KB approach are very close to the experimental values.

Demonstration of disinfection procedure for the development of accurate blood glucose meters in accordance with ISO 15197:2013.

Despite measures to reduce disease transmission, a risk can occur when blood glucose meters (BGMs) are used on multiple individuals or by caregivers assisting a patient. The laboratory and in-clinic performance of a BGM system before and after disinfection should be demonstrated to guarantee accurate readings and reliable control of blood glucose (BG) for patients. In this study, an effective disinfection procedure, conducting wiping 10 times to assure a one minute contact time of the disinfectant on contaminated surface, was first demonstrated using test samples of the meter housing materials, including acrylonitrile butadiene styrene (ABS), polymethyl methacrylate (PMMA), and polycarbonate (PC), in accordance with ISO 15197:2013. After bench studies comprising 10,000 disinfection cycles, the elemental compositions of the disinfected ABS, PMMA, and PC samples were almost the same as in the original samples, as indicated by electron spectroscopy for chemical analysis. Subsequently, the validated disinfection procedure was then directly applied to disinfect 5 commercial BGM systems composed of ABS, PMMA, or PC to observe the effect of the validated disinfection procedure on meter accuracy. The results of HBsAg values after treatment with HBV sera and disinfectant wipes for each material were less than the LoD of each material of 0.020 IU/mL. Before and after the multiple disinfection cycles, 900 of 900 samples (100%) were within the system accuracy requirements of ISO 15197:2013. All of the systems showed high performance before and after the series of disinfection cycles and met the ISO 15197:2013 requirements. In addition, our results demonstrated multiple cleaning and disinfection cycles that represented normal use over the lifetime of a meter of 3-5 years. Our validated cleaning and disinfection procedure can be directly applied to other registered disinfectants for cleaning commercial BGM products in the future.

Growth of oleaginous Rhodotorula glutinis in an internal-loop airlift bioreactor by using lignocellulosic biomass hydrolysate as the carbon source.

The conversion of abundant lignocellulosic biomass (LCB) to valuable compounds has become a very attractive idea recently. This study successfully used LCB (rice straw) hydrolysate as a carbon source for the cultivation of oleaginous yeast-Rhodotorula glutinis in an airlift bioreactor. The lipid content of 34.3 ± 0.6% was obtained in an airlift batch with 60 g reducing sugars/L of LCB hydrolysate at a 2 vvm aeration rate. While using LCB hydrolysate as the carbon source, oleic acid (C18:1) and linoleic acid (C18:2) were the predominant fatty acids of the microbial lipids. Using LCB hydrolysate in the airlift bioreactor at 2 vvm achieved the highest cell mass growth as compared to the agitation tank. Despite the low lipid content of the batch using LCB hydrolysate, this low cost feedstock has the potential of being adopted for the production of ß-carotene instead of lipid accumulation in the airlift bioreactor for the cultivation of R. glutinis.

The effect of component of microemulsions on transdermal delivery of buspirone hydrochloride.

The aim of this study was to evaluate the influence of components such as type, level, and hydrophilic-lipophilic balance (HLB) value of surfactant, type and amount of cosurfactant, and drug concentration on the permeability of buspirone hydrochloride microemulsions through rat skin. The cumulative amount at 24 h ranged from 502.2 ± 57.8 to 1754.3 ± 616.6 µg/cm(2), flux ranged from 23.03 ± 1.84 to 83.36 ± 25.08 µg/(cm(2)/h), and lag time ranged from 3.0 to 4.7 h, indicating that the permeation parameters of buspirone from microemulsions were markedly influenced by the composition of microemulsions. In comparison with the effect of composition of microemulsions on the buspirone permeation capacity, it was found that microemulsions containing surfactant with HLB value of 11.16 possessed higher flux. The viscosity of microemulsions increased, flux decreased, and lag time was prolonged when amount of surfactant in microemulsions increased. The various cosurfactants can also influence the microemulsion formation and drug permeability. The microemulsion with ethanol as cosurfactant had higher permeation rate. However, the buspirone microemulsion with higher flux can provide the therapeutic minimum effective concentration, at workable administrated area about 3.3-5.8 cm(2), demonstrating microemulsions could be a promising drug carrier for transdermal delivery systems.