RESUMEN
Heterogenization of Eosin Y by 3D-printing and its application in photocatalysis are reported. The approach allows a fine tuning of the photocatalyst morphology and its rapid preparation. Photocatalytic activity was evaluated through model organic reactions involving oxidation, reduction, and photosensitization pathways. The efficiency, recyclability and stability of 3D printed EY is remarkable paving the way to new generation of heterogeneous photocatalysts with a perfect control of their shape and adaptable to any photoreactors.
RESUMEN
A photocatalytic thiol-ene aqueous emulsion polymerization under visible-light is described to prepare linear semicrystalline latexes using 2,2'-dimercaptodiethyl sulfide as dithiol and various dienes. The procedure involves low irradiance (3 mW cm-2 ), LED irradiation source, eosin-Y disodium as organocatalyst, low catalyst loading (<0.05% mol), and short reaction time scales (<1 h). The resulting latexes have molecular weights of about 10 kg mol-1 , average diameters of 100 nm, and a linear structure consisting only of thioether repeating units. Electron-transfer reaction from a thiol to the triplet excited state of the photocatalyst is suggested as the primary step of the mechanism (type I), whereas oxidation by singlet oxygen generated by energy transfer has a negligible effect (type II). Only polymers prepared with aliphatic dienes such as diallyl adipate or di(ethylene glycol) divinyl ether exhibit a high crystallization tendency as revealed by differential scanning calorimetry, polarized optical microscopy, and X-ray diffraction. Ordering and crystallization are driven by molecular packing of poly(thioether) chains combining structural regularity, compactness, and flexibility.
Asunto(s)
Compuestos de Sulfhidrilo , Sulfuros , Emulsiones , Polimerizacion , Polímeros/química , Compuestos de Sulfhidrilo/químicaRESUMEN
In the search of smarter routes to control the conditions of N-heterocyclic carbene (NHCs) formation, a two-component air-stable NHC photogenerating system is reported. It relies on the irradiation at 365â nm of a mixture of 2-isopropylthioxanthone (ITX) with 1,3-bis(mesityl)imidazoli(ni)um tetraphenylborate. The photoinduced liberation of NHC is evidenced by reaction with a mesitoyl radical to form an NHC-radical adduct detectable by electron spin resonance spectroscopy. The NHC yield can be determined by 1 Hâ NMR spectroscopy through the formation of a soluble and stable NHC-carbodiimide adduct. To deprotonate the azolium salt and liberate the NHC, a mechanism is proposed in which the role of base is played by ITX radical anion formed in situ by a primary photoinduced electron-transfer reaction between electronically excited ITX (oxidant) and BPh4 - (reductant). An NHC yield as high as 70 % is achieved upon starting with a stoichiometric ratio of ITX and azolium salt. Three different photoNHC-mediated polymerizations are described: synthesis of polyurethane and polyester by organocatalyzed step-growth polymerization and ring-opening copolymerization, respectively, and generation of polynorbornene by ring-opening metathesis polymerization using an NHC-coordinated Ru catalyst formed in situ.
RESUMEN
Latex templating using core-shell particles represents a unique opportunity to design mesoporous carbons with a high level of control on textural properties. This new class of organic colloid templates is synthesized by polymerization-induced self-assembly (PISA) in which a solvophilic poly(hydroxyethyl acrylate) (PHEA) homopolymer is chain extended with a solvophobic polystyrene (PS) via a photomediated reversible-addition-fragmentation-transfer (RAFT) polymerization. The resultant PHEA-b-PS diblock copolymer nanoparticles exhibit a PS core stabilized by a PHEA shell, with two blocks characterized by a low molecular weight dispersity (1.1-1.3) and an adjustable degree of polymerization (DP). The core-shell structured nanoparticles are used as soft template for the formation of mesostructured carbons from phloroglucinol and glyoxylic acid in methanol solution. A micro- and mesostructured cellular foam is obtained having uniform, interconnected, and narrowly distributed mesopores ranging between 15 and 30 nm in diameter, a specific surface area up to 719 m2 g-1, and a total pore volume of (0.4-1.3) cm3 g-1. The mesopore size can be controlled by adjusting the diameter of the PS core (16-29 nm), while the wall thickness can be tailored independently by varying the size of the solvated PHEA shell (5-25 nm). An increase of PHEA block's DP from 25 to 85 gradually extends the stabilizing shell dimension, thus increasing the wall thickness up to 10 nm, and causing the shift from interconnected to isolated mesopores. By comparison, much thinner walls (2-3 nm) are obtained with conventional latex templates such as polystyrene nanoparticles or colloidal silica. Decreasing PHEA DP to 17 induces the formation of copolymer vesicles that can be used as template to create mesoporous carbons with nonspherical mesopores.
RESUMEN
Although N-heterocyclic carbenes (NHCs) have brought profound changes in catalytic organic synthesis, their generation generally requires an inert atmosphere and harsh conditions. To overcome these limitations, an air-stable NHC photogenerator has been developed involving two mild components: 1,3-bis(mesityl)imidazolium tetraphenylborate (IMesH+BPh4-) and electronically excited isopropylthioxanthone (ITX). In this study, the photochemical mechanism is investigated via the accurate identification of the transient species and photoproducts. Electron transfer reaction between the excited triplet state of ITX and BPh4- is demonstrated as being the primary photochemical step. Nanosecond laser spectroscopy shows an efficient quenching and the formation of the expected ITX radical anion. The oxidized borane species is not observed, suggesting that this short-lived species could dissociate very rapidly to give the phenyl radical - successfully identified using electron paramagnetic resonance - and triphenylborane. As regards the final photoproducts, 1H and 13C NMR spectroscopies support the formation of the targeted NHC, 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes), suggesting the occurrence of a subsequent proton transfer reaction between ITX radical anion and imidazolium cation (IMesH+). Gas chromatography-mass spectrometry reveals three other products: biphenyl, isopropylthioxanthene and ITX. Their formation can be reconciled with a 2-step mechanism of photoinduced electron/proton transfer reactions. 11B NMR spectroscopy demonstrates that the main organoboron photoproduct is diphenylborinic acid formed by oxidation of BPh3. Due to its Lewis acidity, Ph2BOH can react with IMes to yield an NHC-boron adduct.
RESUMEN
1,3-Bis(mesityl)imidazolium tetraphenylborate (IMesH+ BPh4- ) can be synthesized in one step by anion metathesis between the corresponding imidazolium chloride and sodium tetraphenylborate. In the presence of 2-isopropylthioxanthone (sensitizer), an IMes N-heterocyclic carbene (NHC) ligand can be photogenerated under irradiation at 365â nm through coupled electron/proton transfer reactions. By combining this tandem NHC photogenerator system with metathesis inactive [RuCl2 (p-cymene)]2 precatalyst, the highly active RuCl2 (p-cymene)(IMes) complex can be formed in situ, enabling a complete ring-opening metathesis polymerization (ROMP) of norbornene in the matter of minutes at room temperature. To the best of our knowledge, this is the first example of a photogenerated NHC. Its exploitation in photoROMP has resulted in a simplified process compared to current photocatalysts, because only stable commercial or easily synthesized reagents are required.
RESUMEN
Initially developed as an elastomer with an excellent record of barrier and chemical resistance properties, poly(disulfide) has experienced a revival linked to the dynamic nature of the S-S covalent bond. A novel photobase-catalyzed oxidative polymerization of multifunctional thiols to poly(disulfide) network is reported. Based solely on air oxidation, the single-step process is triggered by the photodecarboxylation of a xanthone acetic acid liberating a strong bicyclic guanidine base. Starting with a 1 µm thick film based on trithiol poly(ethylene oxide) oligomer, the UV-mediated oxidation of thiols to disulfides occurs in a matter of minutes both selectively, i.e., without overoxidation, and quantitatively as assessed by a range of spectroscopic techniques. Thiolate formation and film thickness determine the reaction rates and yield. Spatial control of the photopolymerization serves to generate robust micropatterns, while the reductive cleavage of S-S bridges allows the recycling of 40% of the initial thiol groups.
Asunto(s)
Disulfuros/química , Guanidinas/química , Polietilenglicoles/química , Compuestos de Sulfhidrilo/química , Xantonas/química , Catálisis , Luz , Espectroscopía de Resonancia Magnética , Acoplamiento Oxidativo , Procesos Fotoquímicos , PolimerizacionRESUMEN
Oil-in-water miniemulsions containing a mixture of monomers as the dispersed organic phase have been shown recently to be promising media for the development of photoinitiated polymerization processes. Albeit a crucial factor for a successful application, the efficiency of light absorption by the photoinitiator in these highly scattering systems is difficult to evaluate. In this work, a well-characterized water insoluble chemical actinometer (DFIS) replaced the oil-soluble photoinitiator, and was used as a probe and a model for UV light absorption in miniemulsions of variable droplet sizes and organic phase compositions (i.e. at different levels of scattered light). In the first step, the photon flux absorbed by the actinometer was determined in model miniemulsions based on an inert solvent (ethyl acetate), at a low oil phase content (3.0-6.0 wt%). For these low to moderately scattering systems, the photon flux absorbed by the actinometer in the miniemulsions was comparable to that in a homogeneous solution of ethyl acetate. In the second step, the absorbed photon flux was investigated in photopolymerizable miniemulsions (a mixture of acrylate monomers as oil phase). Surprisingly, in spite of much higher scattering coefficients than those found for ethyl acetate based miniemulsions of otherwise the same composition, the photon flux absorbed by the actinometer in photopolymerizable miniemulsions showed only a small decreasing trend. Such a result may be considered favorable for the further development of applications of photopolymerizations in miniemulsions.
RESUMEN
Despite considerable achievements over the last two decades, nonporous organic-inorganic hybrid materials are mostly amorphous, especially in the absence of solvothermal processes. The organosilane self-assembly approach is one of the few opportunities for creating a regular assembly of organic and inorganic moieties. Additionally, well-established organosilicon chemistry enables the introduction of numerous organic functionalities. The synthesis of periodically ordered hybrids relies on mono-, bis-, or multisilylated organosilane building blocks self-assembling into hybrid mesostructures or superstructures, subsequently cross-linked by siloxane Si-O-Si condensation. The general synthesis procedure is template-free and one-step. However, three concurrent processes underlie the generation of self-organized hybrid networks: thermodynamics of amphiphilic aggregation, dynamic self-assembly, and kinetically controlled sol-gel chemistry. Hence, the set of experimental conditions and the precursor structure are of paramount importance in achieving long-range order. Since the first developments in the mid-1990s, the subject has seen considerable progress leading to many innovative advanced nanomaterials providing promising applications in membranes, pollutant remediation, catalysis, conductive coatings, and optoelectronics. This work reviews, comprehensively, the primary evolution of this expanding field of research.
RESUMEN
While the photopatterning of self-assembled monolayers (SAMs) has been extensively investigated, much less attention has been given to highly ordered multilayer systems. By being both thicker (0.5-2 µm) and more stable (cross-linked) than SAMs, patterned hybrid multilayers lend themselves more easily to the development of technology-relevant materials and characterization. This paper describes a facile two-step UV approach to patterning an alkylsilane multilayer by combining photoinduced self-assembly for multilayer synthesis and photodegradation through a mask for creating patterns within the film. In this second stage, a spatially resolved removal of the alkyl tail via a photooxidation mechanism took place, yielding regular and uniform silica microdomains. The result was a regular array of features (alkylsiloxane/silica) differing in chemical composition (hybrid/inorganic), ordering (crystal-like/disordered), and wettability (hydrophobic/hydrophilic). Such a photopatterned film was of utility for a range of applications in which water droplets, inorganic crystals, or aqueous polymer dispersions were selectively deposited in the hydrophilic silica microwells.
Asunto(s)
Polímeros/química , Dióxido de Silicio/química , Interacciones Hidrofóbicas e Hidrofílicas , FotólisisRESUMEN
Over the past ten years, understanding the self-assembly process within mesostructured silica films has been a major concern. Our characterization approach relies on two powerful and complementary techniques: in situ time-resolved FTIR spectroscopy and ex situ solid-state NMR. As model systems, three silica/surfactant films displaying various degrees of mesostructuration were synthesized using an amphiphilic block copolymer (PEO-b-PPO-b-PEO) via a UV light induced self-assembly process. The key idea is that the hydration state of the hydrophobic PPO chain is expected to be different depending upon whether the sample is amorphous (blend) or mesostructured (segregated). With real-time FTIR experiments, we show that the methyl deformation mode can act as a signature for the PPO microenvironment so as to trace the progressive copolymer self-association throughout the irradiation time. In (1)H solid-state NMR, the dependence of the (1)H chemical shift on the PPO hydration state has been exploited to evidence the extent of mesostructuration.
RESUMEN
A complex crystallization behavior was observed for the alternating copolymer DMDS-alt-DVE synthesized via thiol-ene step-growth polymerization. Understanding the underlying complex crystallization processes of such innovative polythioethers is critical for their application, for example, in polymer coating technologies. These alternating copolymers have polymorphic traits, resulting in different phases that may display distinct crystalline structures. The copolymer DMDS-alt-DVE was studied in an earlier work, where only two crystalline phases were reported: a low melting, L - Tm, and high melting, H - Tm phase. Remarkably, the H - Tm form was only achieved by the previous formation and melting of the L - Tm form. We applied calorimetric techniques encompassing seven orders of magnitude in scanning rates to further explore this complex polymorphic behavior. Most importantly, by rapidly quenching the sample to temperatures well below room temperature, we detected an additional polymorphic form (characterized by a very low melting phase, denoted VL - Tm). Moreover, through tailored thermal protocols, we successfully produced samples containing only one, two, or all three polymorphs, providing insights into their interrelationships. Understanding polymorphism, crystallization, and the resulting morphological differences can have significant implications and potential impact on mechanical resistance and barrier properties.
RESUMEN
Surface photopatterning of organosilane self-assembled monolayers (SAM) has received increasing attention since its introduction 20 years ago. Herein we report for the first time a cost-efficient soft photopatterning technique affording amplified 3D multilayer structures. The essential chemistry relies on a spatially controlled photoacid-catalyzed hydrolysis and polycondensation of n-alkyltrimethoxysilane precursors (n-C(12)H(25)Si(OCH(3))(3),). Amphiphilic siloxane species are photogenerated locally and are able to self-assemble spontaneously into a long-range-ordered lamellar mesostructure.
Asunto(s)
Membranas Artificiales , Silanos/química , Tamaño de la Partícula , Procesos Fotoquímicos , Propiedades de SuperficieRESUMEN
Self-assembled block copolymer nanoparticles (NPs) have emerged as major potential nanoscale vehicles for fluorescence bioimaging. The preparation of NPs with high yields possessing high kinetic stability to prevent the leakage of fluorophore molecules is crucial to their practical implementation. Here, we report a photomediated RAFT polymerization-induced self-assembly (PISA) yielding uniform and nanosized poly((oligo(ethylene glycol) acrylate)-block-poly(benzyl acrylate) particles (POEGA-b-PBzA) with a concentration of 22 wt%, over 20 times more than with micellization and nanoprecipitation. The spherical diblock copolymer nanoparticles have an average size of 10-50 nm controllable through the degree of polymerization of the stabilizing POEGA block. Subsequent dialysis against water and swelling with Nile red solution led to highly stable fluorescent NPs able to withstand the changes in concentration, ionic strength, pH or temperature. A PBzA/water interfacial tension of 48.6 mN m-1 hinders the exchange between copolymer chains, resulting in the trapping of NPs in a "kinetically frozen" state responsible for high stability. A spectroscopic study combining fluorescence and UV-vis absorption agrees with a preferential distribution of fluorophores in the outer POEGEA shell despite its hydrophobic nature. Nile red-doped POEGA-b-PBzA micelles without initiator residues and unimers but with high structural stability turn out to be noncytotoxic, and can be used for the optical imaging of cells. Real-time confocal fluorescence microscopy shows a fast cellular uptake using C2C12 cell lines in minutes, and a preferential localization in the perinuclear region, in particular in the vesicles.
Asunto(s)
Nanopartículas , Polímeros , Micelas , Polimerizacion , AguaRESUMEN
We describe a novel solvent- and water-free sol-gel process for n-octadecyltriclorosilane (C(18)H(37)SiCl(3)) film catalyzed by photogenerated Brönsted acids. Driven by hydrophobic van der Waals interactions, a photoinduced self-assembly process occurs to afford a long-range ordered lamellar mesostructure, characterized by X-ray diffraction and transmission electron microscopy. Real-time Fourier transform IR spectroscopy was instrumental to probe the fast hydrolysis kinetics and assess the change of conformational behavior of the alkyl chains during UV irradiation. A unique combination of different solid-state NMR techniques ((29)Si, (13)C, (1)H) provided an insight into the supramolecular organization of this hybrid film.
RESUMEN
Electron microscopy has proved to be a major tool to study the structure of self-assembled amphiphilic block copolymer particles. These specimens, like supramolecular biological structures, are problematic for electron microscopy because of their poor capacity to scatter electrons and their susceptibility to radiation damage and dehydration. Sub-50 nm core-shell spherical particles made up of poly(hydroxyethyl acrylate)-b-poly(styrene) are prepared via polymerization-induced self-assembly (PISA). For their morphological characterization, we discuss the advantages, limitations, and artefacts of TEM with or without staining, cryo-TEM, and SEM. A number of technical points are addressed such as precisely shaping of particle boundaries, resolving the particle shell, differentiating particle core and shell, and the effect of sample drying and staining. TEM without staining and cryo-TEM largely evaluate the core diameter. Negative staining TEM is more efficient than positive staining TEM to preserve native structure and to visualize the entire particle volume. However, no technique allows for a satisfactory imaging of both core and shell regions. The presence of long protruding chains is manifested by patched structure in cryo-TEM and a significant edge effect in SEM. This manuscript provides a basis for polymer chemists to develop their own specimen preparations and to tackle the interpretation of challenging systems.
RESUMEN
Base catalyst and oxidant are usually necessary to promote the polymerization of poly(disulfide) oligomers through oxidative coupling of the terminal SH groups into S-S bonds. In this study, we prove that self-polymerization of bifunctional (disulfide) oligomer films can take place in a matter of minutes under UVC irradiation (254 nm, 10.5 mW cm-2). The resulting insoluble polymer is characterized using solid-state NMR, 1H T2 NMR relaxation measurements, thermal analysis, and Fourier-transform infrared spectroscopy and proves to have similar composition as a model poly(disulfide) prepared under oxidative conditions, but distinct physical properties. These differences are explained by a change in polymer architecture due to a higher ratio of cyclization relative to linear polymerization. Homolytic photocleavage of internal S-S bonds creates thiyl groups close to each other, driving an increased kinetic feasibility for the cyclization reaction by radical coupling. The subsequent formation of mechanically interlocked macrocycles (polycatenane network) is proposed to account for film properties analogous to those of a cross-linked polymer.
RESUMEN
Although metathesis photoinduced catalysis is now well established, there is little development in thin film preparation using photochemically activated ring-opening metathesis polymerization (ROMP). Herein, a N-heterocyclic carbene (NHC) photogenerator (1,3-bis(mesityl)imidazolium tetraphenylborate) is combined with an inactive metathesis catalyst ([RuCl2(p-cymene)]2) to generate under UV irradiation an active catalyst (p-cymene)RuCl2 (NHC), that is capable of producing in a single step cross-linked copolymer films by ROMP of norbornene with dicyclopentadiene. The study shows that the photoinitiated catalytic system can be optimized by increasing the yield of photogenerated NHC through a sensitizer (2-isopropylthioxanthone), and by choosing [RuI2(p-cymene)]2 as precatalyst to provide a long-term photolatency. The cross-linked polymer structure is investigated by a range of techniques including gel content measurement, FT-IR and solid-state 13C NMR spectroscopy, TGA and DSC, which reveal a cross-linking mechanism proceeding through both metathesis and olefin coupling.
RESUMEN
We report a method to generate the N-heterocyclic carbene (NHC) 1,3-dimesitylimidazol-2-ylidene (IMes) under UV-irradiation at 365 nm to characterize IMes and determine the corresponding photochemical mechanism. Then, we describe a protocol to perform ring-opening metathesis polymerization (ROMP) in solution and in miniemulsion using this NHC-photogenerating system. To photogenerate IMes, a system comprising 2-isopropylthioxanthone (ITX) as the sensitizer and 1,3-dimesitylimidazolium tetraphenylborate (IMesH+BPh4-) as the protected form of NHC is employed. IMesH+BPh4- can be obtained in a single step by anion exchange between 1,3-dimesitylimidazolium chloride and sodium tetraphenylborate. A real-time steady-state photolysis setup is described, which hints that the photochemical reaction proceeds in two consecutive steps: 1) ITX triplet is photo-reduced by the borate anion and 2) subsequent proton transfer takes place from the imidazolium cation to produce the expected NHC IMes. Two separate characterization protocols are implemented. Firstly, CS2 is added to the reaction media to evidence the photogeneration of NHC through formation of the IMes-CS2 adduct. Secondly, the amount of NHC released in situ is quantified using acid-base titration. The use of this NHC photo-generating system for the ROMP of norbornene is also discussed. In solution, a photopolymerization experiment is conducted by mixing ITX, IMesH+BPh4-, [RuCl2(p-cymene)]2 and norbornene in CH2Cl2, then irradiating the solution in a UV reactor. In a dispersed medium, a monomer miniemulsion is first formed then irradiated inside an annular reactor to produce a stable poly(norbornene) latex.
Asunto(s)
Metano/análogos & derivados , Fotoquímica/métodos , Fotólisis , Metano/química , PolimerizacionRESUMEN
Historically, the synthesis of aqueous polymer dispersions has focused on radical chain-growth polymerization of low-cost acrylate or styrene emulsions. Herein, we demonstrate the potential of UV-initiated thiol-ene step-growth radical polymerization, departing from a nontransparent difunctional monomer miniemulsion based on ethylene glycol dithiol and diallyl adipate. Performed without solvent and at ambient conditions, the photopolymerization process is energy-effective, environmentally friendly, and ultrafast, leading to full monomer consumption in 2 s, upon irradiating a miniemulsion contained in a 1 mm thick quartz cell microreactor. The resultant linear poly(thioether ester) particles have an average diameter of 130 nm. After water evaporation, they yield a clear elastomeric film combining chemical resistance and high degree of crystallinity (55%).