Atom-Dependent Edge-Enhanced Second-Harmonic Generation on MoS2 Monolayers.

Edge morphology and lattice orientation of single-crystal molybdenum disulfide (MoS2) monolayers, a transition metal dichalcogenide (TMD), possessing a triangular shape with different edges grown by chemical vapor deposition are characterized by atomic force microscopy and transmission electron microscopy. Multiphoton laser scanning microscopy is utilized to study one-dimensional atomic edges of MoS2 monolayers with localized midgap electronic states, which result in greatly enhanced optical second-harmonic generation (SHG). Microscopic S-zigzag edge and S-Mo Klein edge (bare Mo atoms protruding from a S-zigzag edge) terminations and the edge-atom dependent resonance energies can therefore be deduced based on SHG images. Theoretical calculations based on density functional theory clearly explain the lower energy of the S-zigzag edge states compared to the corresponding S-Mo Klein edge states. Characterization of the atomic-scale variation of edge-enhanced SHG is a step forward in this full-optical and high-yield technique of atomic-layer TMDs.

Synthesis of Large-Area InSe Monolayers by Chemical Vapor Deposition.

Recently, 2D materials of indium selenide (InSe) layers have attracted much attention from the scientific community due to their high mobility transport and fascinating physical properties. To date, reports on the synthesis of high-quality and scalable InSe atomic films are limited. Here, a synthesis of InSe atomic layers by vapor phase selenization of In2 O3 in a chemical vapor deposition (CVD) system, resulting in large-area monolayer flakes or thin films, is reported. The atomic films are continuous and uniform over a large area of 1 × 1 cm2 , comprising of primarily InSe monolayers. Spectroscopic and microscopic measurements reveal the highly crystalline nature of the synthesized InSe monolayers. The ion-gel-gated field-effect transistors based on CVD InSe monolayers exhibit n-type channel behaviors, where the field effect electron mobility values can be up to ≈30 cm2 V-1 s-1 along with an on/off current ratio, of >104 at room temperature. In addition, the graphene can serve as a protection layer to prevent the oxidation between InSe and the ambient environment. Meanwhile, the synthesized InSe films can be transferred to arbitrary substrates, enabling the possibility of reassembly of various 2D materials into vertically stacked heterostructures, prompting research efforts to probe its characteristics and applications.

Pressure-dependent optical and vibrational properties of monolayer molybdenum disulfide.

Controlling the band gap by tuning the lattice structure through pressure engineering is a relatively new route for tailoring the optoelectronic properties of two-dimensional (2D) materials. Here, we investigate the electronic structure and lattice vibrational dynamics of the distorted monolayer 1T-MoS2 (1T') and the monolayer 2H-MoS2 via a diamond anvil cell (DAC) and density functional theory (DFT) calculations. The direct optical band gap of the monolayer 2H-MoS2 increases by 11.7% from 1.85 to 2.08 eV, which is the highest reported for a 2D transition metal dichalcogenide (TMD) material. DFT calculations reveal a subsequent decrease in the band gap with eventual metallization of the monolayer 2H-MoS2, an overall complex structure-property relation due to the rich band structure of MoS2. Remarkably, the metastable 1T'-MoS2 metallic state remains invariant with pressure, with the J2, A1g, and E2g modes becoming dominant at high pressures. This substantial reversible tunability of the electronic and vibrational properties of the MoS2 family can be extended to other 2D TMDs. These results present an important advance toward controlling the band structure and optoelectronic properties of monolayer MoS2 via pressure, which has vital implications for enhanced device applications.

Three-dimensional molybdenum sulfide sponges for electrocatalytic water splitting.

Electroactive MoSx catalysts on porous 3D sponges synthezied by a simple and scalable thermolysis process are proposed. Although no conducting materials are used to host the MoSx catalysts, they still serve as efficient electrodes for hydrogen evolution. The high current density of the MoSx-coated sponges are attributed to the large electrochemical surface area and their S-rich chemical structure.

A flexible hydrophilic-modified graphene microprobe for neural and cardiac recording.

A graphene-based flexible microprobe developed by microelectromechanical system technology shows high resolution for the detection of electrophysiological signals from various bio-objects. The hydrophilization post-treatment using steam plasma was performed on the graphene surface to decrease the interfacial impedance between graphene and electrolyte, and thus improve the signal-to-noise ratio during neural and cardiac recording. The signal-to-noise ratio of the action potentials from axons of a crayfish measured by hydrophilic-modified graphene microprobe (27.8±4.0dB) is higher than that of untreated device (20.3±3.3dB). Also, the form of the QRS complex and T wave in the electrocardiogram of the zebrafish heart can be clearly distinguished using the modified device. The total measured noise levels of the overall stability of the system were 4.2µVrms (hydrophilic graphene) and 7.64µVrms (hydrophobic graphene). The graphene-based implant can be further used for in vivo, long-term recording and retina prosthesis. FROM THE CLINICAL EDITOR: In this study a graphene-based flexible microprobe developed using microelectromechanical system technology was demonstrated to enable high resolution detection of electrophysiological signals, including EKG in zebrafish models. Both hydrophilic and hydrophobic graphene were studied, paving the way to potential future clinical applications of this new technology.

Electrical probing of submicroliter liquid using graphene strip transistors built on a nanopipette.

Graphene sheets made by chemical vapor deposition are transferred onto a glass nanopipette to form graphene strips. Two strips are connected at the nanopipette tip end to form a transistor channel. This graphene-based transistor can be operated in a liquid-gating condition, thereby allowing the electrical detection of the pH value of a droplet with submicroliter volume.

Spatial Control of Dynamic p-i-n Junctions in Transition Metal Dichalcogenide Light-Emitting Devices.

Emerging transition metal dichalcogenides (TMDCs) offer an attractive platform for investigating functional light-emitting devices, such as flexible devices, quantum and chiral devices, high-performance optical modulators, and ultralow threshold lasers. In these devices, the key operation is to control the light-emitting position, that is, the spatial position of the recombination zone to generate electroluminescence, which permits precise light guides/passes/confinement to ensure favorable device performance. Although various structures of TMDC light-emitting devices have been demonstrated, including the transistor configuration and heterostructured diodes, it is still difficult to tune the light-emitting position precisely owing to the structural device complexity. In this study, we fabricated two-terminal light-emitting devices with chemically synthesized WSe2, MoSe2, and WS2 monolayers, and performed direct observations of their electroluminescence, from which we discovered a divergence in their light-emitting positions. Subsequently, we propose a method to associate spatial electroluminescence imaging with transport properties among different samples; consequently, a common rule for determining the locations of recombination zones is revealed. Owing to dynamic carrier accumulations and p-i-n junction formations, the light-emitting positions in electrolyte-based devices can be tuned continuously. The proposed method will expand the device applicability for designing functional optoelectronic applications based on TMDCs.

Hydrophilic modification of neural microelectrode arrays based on multi-walled carbon nanotubes.

To decrease the impedance of microelectrode arrays, for neuroscience applications we have fabricated and tested MEA based on multi-walled carbon nanotubes. With decreasing physical size of a microelectrode, its impedance increases and charge-transfer capability decreases. To decrease the impedance, the effective surface area of the electrode must generally be increased. We explored the effect of plasma treatment on the surface wettability of MWCNT. With a steam-plasma treatment the surface of MWCNT becomes converted from superhydrophobic to superhydrophilic; this hydrophilic property is attributed to -OH bonding on the surface of MWCNT. We reported the synthesis at 400 °C of MWCNT on nickel-titanium multilayered metal catalysts by thermal chemical vapor deposition. Applying plasma with a power less than 25 W for 10 s improved the electrochemical and biological properties, and circumvented the limitation of the surface reverting to a hydrophobic condition; a hydrophilic state is maintained for at least one month. The MEA was used to record neural signals of a lateral giant cell from an American crayfish. The response amplitude of the action potential was about 275 µV with 1 ms period; the recorded data had a ratio of signal to noise up to 40.12 dB. The improved performance of the electrode makes feasible the separation of neural signals and the recognition of their distinct shapes. With further development the rapid treatment will be useful for long-term recording applications.

CVD growth of large-area InS atomic layers and device applications.

Group-III monochalcogenides of two-dimensional (2D) layered materials have attracted widespread attention among scientists due to their unique electronic performance and interesting chemical and physical properties. Indium sulfide (InS) is attracting increasing interest from scientists because it has two distinct crystal structures. However, studies on the synthesis of highly crystalline, large-area, and atomically thin-film InS have not been reported thus far. Here, the chemical vapor deposition (CVD) synthesis method of atomic InS crystals has been reported in this paper. The direct chemical vapour phase reaction of metal oxides with chalcogen precursors produces a large-sized hexagonal crystal structure and atomic-thickness InS flakes or films. The InS atomic films are merged with a plurality of triangular InS crystals that are uniform and entire and have surface areas of 1 cm2 and controllable thicknesses in bilayers or trilayers. The properties of the as-grown highly crystalline samples were characterized by spectroscopic and microscopic measurements. The ion-gel gated InS field-effect transistors (FETs) reveal n-type transport behavior, and have an on-off current ratio of >103 and a room-temperature electron mobility of ∼2 cm2 V-1 s-1. Moreover, our CVD InS can be transferred from mica to any substrates, so various 2D materials can be reassembled into vertically stacked heterostructures, thus facilitating the development of heterojunctions and exploration of the properties and applications of their interactions.

A Versatile and Simple Approach to Generate Light Emission in Semiconductors Mediated by Electric Double Layers.

The light-emitting device is the primary device for current light sources. In principle, conventional light-emitting devices need heterostructures and/or intentional carrier doping to form a p-n junction. This junction formation is, however, very difficult to achieve for most emerging semiconductors, and the fabrication of light-emitting devices is invariably a significant challenge. This study proposes a versatile and simple approach to realize light-emitting devices. This proposed device requires only a semiconducting film with two electrodes that are covered with an electrolyte. This unique structure achieves light emission at a voltage slightly larger than the bandgap energy of materials. This study applies this concept to emerging direct bandgap semiconductors, such as transition metal dichalcogenide monolayers and zinc oxide single crystals. These devices generate obvious light emission and provide sufficient evidence of the formation of a dynamic p-i-n junction or tunneling junction, presenting a versatile technique to develop optoelectronic devices.

Note: A simple multi-channel optical system for modulation spectroscopies.

Photoreflectance-difference (PR/PRD) and reflectance-difference (RD) spectroscopies employ synchronic detection usually with lock-in amplifiers operating at moderate (200-1000 Hz) and high (50-100 KHz) modulation frequencies, respectively. Here, we report a measurement system for these spectroscopies based on a multichannel CCD spectrometer without a lock-in amplifier. In the proposed scheme, a typical PRD or RD spectrum consists of numerical subtractions between a thousand CCD captures recorded, while a photoelastic modulator is either operating or inhibited. This is advantageous and fits the slow response of CCD detectors to high modulation frequencies. The resulting spectra are processed with Savitzky-Golay filtering and compared well with those measured with conventional scanning systems based on lock-in amplifiers.

Highly Flexible and High-Performance Complementary Inverters of Large-Area Transition Metal Dichalcogenide Monolayers.

Complementary inverters constructed from large-area monolayers of WSe2 and MoS2 achieve excellent logic swings and yield an extremely high gain, large total noise margin, low power consumption, and good switching speed. Moreover, the WSe2 complementary-like inverters built on plastic substrates exhibit high mechanical stability. The results provide a path toward large-area flexible electronics.

Optically initialized robust valley-polarized holes in monolayer WSe2.

A robust valley polarization is a key prerequisite for exploiting valley pseudospin to carry information in next-generation electronics and optoelectronics. Although monolayer transition metal dichalcogenides with inherent spin-valley coupling offer a unique platform to develop such valleytronic devices, the anticipated long-lived valley pseudospin has not been observed yet. Here we demonstrate that robust valley-polarized holes in monolayer WSe2 can be initialized by optical pumping. Using time-resolved Kerr rotation spectroscopy, we observe a long-lived valley polarization for positive trion with a lifetime approaching 1 ns at low temperatures, which is much longer than the trion recombination lifetime (∼10-20 ps). The long-lived valley polarization arises from the transfer of valley pseudospin from photocarriers to resident holes in a specific valley. The optically initialized valley pseudospin of holes remains robust even at room temperature, which opens up the possibility to realize room-temperature valleytronics based on transition metal dichalcogenides.

Ultrafast multi-level logic gates with spin-valley coupled polarization anisotropy in monolayer MoS2.

The inherent valley-contrasting optical selection rules for interband transitions at the K and K' valleys in monolayer MoS2 have attracted extensive interest. Carriers in these two valleys can be selectively excited by circularly polarized optical fields. The comprehensive dynamics of spin valley coupled polarization and polarized exciton are completely resolved in this work. Here, we present a systematic study of the ultrafast dynamics of monolayer MoS2 including spin randomization, exciton dissociation, free carrier relaxation, and electron-hole recombination by helicity- and photon energy-resolved transient spectroscopy. The time constants for these processes are 60 fs, 1 ps, 25 ps, and ~300 ps, respectively. The ultrafast dynamics of spin polarization, valley population, and exciton dissociation provides the desired information about the mechanism of radiationless transitions in various applications of 2D transition metal dichalcogenides. For example, spin valley coupled polarization provides a promising way to build optically selective-driven ultrafast valleytronics at room temperature. Therefore, a full understanding of the ultrafast dynamics in MoS2 is expected to provide important fundamental and technological perspectives.

Enhanced thermoelectric performance of PEDOT:PSS flexible bulky papers by treatment with secondary dopants.

For inorganic thermoelectric materials, Seebeck coefficient and electrical conductivity are interdependent, and hence optimization of thermoelectric performance is challenging. In this work we show that thermoelectric performance of PEDOT:PSS can be enhanced by greatly improving its electrical conductivity in contrast to inorganic thermoelectric materials. Free-standing flexible and smooth PEDOT:PSS bulky papers were prepared using vacuum-assisted filtration. The electrical conductivity was enhanced to 640, 800, 1300, and 1900 S cm(-1) by treating PEDOT:PSS with ethylene glycol, polyethylene glycol, methanol, and formic acid, respectively. The Seebeck coefficient did not show significant variation with the tremendous conductivity enhancement being 21.4 and 20.6 µV K(-1) for ethylene glycol- and formic acid-treated papers, respectively. This is because secondary dopants, which increase electrical conductivity, do not change oxidation level of PEDOT. A maximum power factor of 80.6 µW m(-1) K(-2) was shown for formic acid-treated samples, while it was only 29.3 µW m(-1) K(-2) for ethylene glycol treatment. Coupled with intrinsically low thermal conductivity of PEDOT:PSS, ZT ≈ 0.32 was measured at room temperature using Harman method. We investigated the reasons behind the greatly enhanced thermoelectric performance.

Intrinsic homogeneous linewidth and broadening mechanisms of excitons in monolayer transition metal dichalcogenides.

The band-edge optical response of transition metal dichalcogenides, an emerging class of atomically thin semiconductors, is dominated by tightly bound excitons localized at the corners of the Brillouin zone (valley excitons). A fundamental yet unknown property of valley excitons in these materials is the intrinsic homogeneous linewidth, which reflects irreversible quantum dissipation arising from system (exciton) and bath (vacuum and other quasiparticles) interactions and determines the timescale during which excitons can be coherently manipulated. Here we use optical two-dimensional Fourier transform spectroscopy to measure the exciton homogeneous linewidth in monolayer tungsten diselenide (WSe2). The homogeneous linewidth is found to be nearly two orders of magnitude narrower than the inhomogeneous width at low temperatures. We evaluate quantitatively the role of exciton-exciton and exciton-phonon interactions and population relaxation as linewidth broadening mechanisms. The key insights reported here­strong many-body effects and intrinsically rapid radiative recombination­are expected to be ubiquitous in atomically thin semiconductors.

Determination of band alignment in the single-layer MoS2/WSe2 heterojunction.

The emergence of two-dimensional electronic materials has stimulated proposals of novel electronic and photonic devices based on the heterostructures of transition metal dichalcogenides. Here we report the determination of band offsets in the heterostructures of transition metal dichalcogenides by using microbeam X-ray photoelectron spectroscopy and scanning tunnelling microscopy/spectroscopy. We determine a type-II alignment between MoS2 and WSe2 with a valence band offset value of 0.83 eV and a conduction band offset of 0.76 eV. First-principles calculations show that in this heterostructure with dissimilar chalcogen atoms, the electronic structures of WSe2 and MoS2 are well retained in their respective layers due to a weak interlayer coupling. Moreover, a valence band offset of 0.94 eV is obtained from density functional theory, consistent with the experimental determination.

Bandgap tunability at single-layer molybdenum disulphide grain boundaries.

Two-dimensional transition metal dichalcogenides have emerged as a new class of semiconductor materials with novel electronic and optical properties of interest to future nanoelectronics technology. Single-layer molybdenum disulphide, which represents a prototype two-dimensional transition metal dichalcogenide, has an electronic bandgap that increases with decreasing layer thickness. Using high-resolution scanning tunnelling microscopy and spectroscopy, we measure the apparent quasiparticle energy gap to be 2.40 ± 0.05 eV for single-layer, 2.10 ± 0.05 eV for bilayer and 1.75 ± 0.05 eV for trilayer molybdenum disulphide, which were directly grown on a graphite substrate by chemical vapour deposition method. More interestingly, we report an unexpected bandgap tunability (as large as 0.85 ± 0.05 eV) with distance from the grain boundary in single-layer molybdenum disulphide, which also depends on the grain misorientation angle. This work opens up new possibilities for flexible electronic and optoelectronic devices with tunable bandgaps that utilize both the control of two-dimensional layer thickness and the grain boundary engineering.

Second harmonic generation from artificially stacked transition metal dichalcogenide twisted bilayers.

Optical second harmonic generation (SHG) is known as a sensitive probe to the crystalline symmetry of few-layer transition metal dichalcogenides (TMDs). Layer-number dependent and polarization resolved SHG have been observed for the special case of Bernal stacked few-layer TMDs, but it remains largely unexplored for structures deviated from this ideal stacking order. Here we report on the SHG from homo- and heterostructural TMD bilayers formed by artificial stacking with an arbitrary stacking angle. The SHG from the twisted bilayers is a coherent superposition of the SH fields from the individual layers, with a phase difference depending on the stacking angle. Such an interference effect is insensitive to the constituent layered materials and thus applicable to hetero-stacked bilayers. A proof-of-concept demonstration of using the SHG to probe the domain boundary and crystal polarity of mirror twins formed in chemically grown TMDs is also presented. We show here that the SHG is an efficient, sensitive, and nondestructive characterization for the stacking orientation, crystal polarity, and domain boundary of van der Waals heterostructures made of noncentrosymmetric layered materials.

Role of metal contacts in high-performance phototransistors based on WSe2 monolayers.

Phototransistors based on monolayer transition metal dichalcogenides (TMD) have high photosensitivity due to their direct band gap transition. However, there is a lack of understanding of the effect of metal contacts on the performance of atomically thin TMD phototransistors. Here, we fabricate phototransistors based on large-area chemical vapor deposition (CVD) tungsten diselenide (WSe2) monolayers contacted with the metals of different work function values. We found that the low Schottky-contact WSe2 phototransistors exhibit a very high photo gain (10(5)) and specific detectivity (10(14)Jones), values higher than commercial Si- and InGaAs-based photodetectors; however, the response speed is longer than 5 s in ambient air. In contrast, the high Schottky-contact phototransistors display a fast response time shorter than 23 ms, but the photo gain and specific detectivity decrease by several orders of magnitude. Moreover, the fast response speed of the high Schottky-contact devices is maintained for a few months in ambient air. This study demonstrates that the contact plays an important role in TMD phototransistors, and barrier height tuning is critical for optimizing the photoresponse and photoresponsivity.