RESUMEN
A high level of PD-L1 in cancer cells promotes tumor immune escape and inhibits tumor immunotherapy. Although PD-L1 gene expression is upregulated by multiple pathways, its gene transcriptional repression is still unclear. Here we found that loss of PPARα, one of the peroxisome-proliferator-activated receptors (PPARs) family members, promoted colorectal tumor immune escape. Mechanistically, PPARα directly bound to the PD-L1 promoter resulting in its gene transcriptional repression, which in turn increased T cell activity, and PPARα agonist enhanced this event. However, ERK induced PPARα-S12 phosphorylation leading to blockade of PPARα-mediated PD-L1 transcriptional repression, and the combination of ERK inhibitor with PPARα agonist significantly inhibited tumor immune escape. These findings suggest that the ERK-PPARα pathway inhibited PD-L1 gene transcriptional repression and promoted colorectal tumor immune escape.
Asunto(s)
Antígeno B7-H1 , Neoplasias Colorrectales , PPAR alfa , Escape del Tumor , PPAR alfa/metabolismo , PPAR alfa/genética , Neoplasias Colorrectales/metabolismo , Neoplasias Colorrectales/genética , Neoplasias Colorrectales/inmunología , Neoplasias Colorrectales/patología , Antígeno B7-H1/metabolismo , Antígeno B7-H1/genética , Antígeno B7-H1/inmunología , Humanos , Fosforilación , Animales , Ratones , Regulación Neoplásica de la Expresión Génica , Línea Celular Tumoral , Sistema de Señalización de MAP QuinasasRESUMEN
CuInS2 (CIS) quantum dots (QDs) represent an important class of colloidal materials with broad application potential, owing to their low toxicity and unique optical properties. Although coating with a ZnS shell has been identified as a crucial method to enhance optical performance, the occurrence of cation exchange has historically resulted in the unintended formation of Cu-In-Zn-S alloyed QDs, causing detrimental blueshifts in both absorption and photoluminescence (PL) spectral profiles. In this study, we present a facile one-pot synthetic strategy aimed at impeding the cation exchange process and promoting ZnS shell growth on CIS core QDs. The suppression of both electron-phonon interaction and Auger recombination by the rigid ZnS shell results in CIS/ZnS core/shell QDs that exhibit a wide near-infrared (NIR) emission coverage and a remarkable PL quantum yield of 92.1%. This effect boosts the fabrication of high-performance, QD-based NIR light-emitting diodes with the best stability of such materials so far.
RESUMEN
Since carbon dots (CDs) with good water solubility are preferred by researchers and biological applications, a hydrothermal method was used to synthesize green fluorescent CDs with an excitation-independent peak at 526â nm using deionized water as the solvent and neutral red as the carbon source. To achieve spectral modulation, the pH of the solvent was adjusted with KOH to obtain orange CDs (O-CDs) in an alkaline environment, with the emission peak red-shifted to 630â nm. The water-soluble CDs were prepared for multidimension sensing as Fe3+ sensing (on/off). Carbon dots dispersed into a silica gel matrix can be used for fingerprint detection of various materials.
RESUMEN
Many advanced materials are designed for the removal of heavy metal ions from water. However, materials for eliminating trace heavy metal ions from wastewater to meet drinking water standards remain a major challenge. Herein, epoxy group-functionalized open-cellular beads are synthesized by UV polymerization of a water-in-oil-in-water system. The epoxy groups are further transformed into diethylenetriaminepentaacetic acid (DTPA) with hexamethylene diamine as a bridging agent. The resulting material (DTPA@polyHIPE beads) can eliminate trace Cu(II), Cr(III), Pb(II), Fe(III), or Cd(II) from water. When 0.15 g of DTPA@polyHIPE beads are used to adsorb metal ions of 20 mg in 100 mL of water, the residue concentrations of Cu(II), Cr(III), Pb(II), Fe(III), and Cd(II) are reduced to 0.08, 0.06, 0.02, 0.09, and 0.07 mg/L, respectively. The adsorption efficiencies of the beads for these ions are all higher than 99.55%. The adsorbent is durable and exhibits good recyclability by retaining an adsorption capacity of ≥91% after 5 cycles. The negative values of ΔG in the adsorption process indicate that the adsorption is feasible and spontaneous. The chemical adsorption follows the Freundlich adsorption model, indicating a multilayer heterogeneous adsorption. The DTPA@polyHIPE beads have a great potential application in dealing with trace heavy metal ion polluted water.
RESUMEN
Durable functionalization on polypropylene (PP) surfaces is always a key problem to besolved. Coatings with low surface energy peel off easily especially under extreme conditions, owing to their weak adhesion. In this paper, side groups of both polyhedral oligomeric silsesquioxane (POSS) and alkane are grafted to polypentafluorophenyl methacrylate (PFP), and then PP blends with these side-group modified PFP are obtained through a melt-blending process. It is found that POSS can result in surface segregation and provide hydrophobicity in blends. Microfibers are formed because of the orientation effect during the tensile testing, which furtherly promotes mechanical strength. Significantly, alkaneside-groups can be entangled with PP segments, which brings about cross linking. Therefore, with crosslinking and synchronous orientation of POSS, the elongation at the break of blends is greatly increased up to 974%. The final blend demonstrates quite durable hydrophobicity under many extreme conditions, such as repeated tape peeling, ultrasonic washing, strong friction, and soaking in strong acid (pH = 1), strong alkali (pH = 14) and alcohol. The heat and UV resistance of the blend are also obviously improved. This study will develop anovel and facile strategy to endow PP with durable hydrophobicity as well as greatly enhanced mechanical properties.
RESUMEN
Three-dimensional flexible piezoresistive porous sensors are of interest in health diagnosis and wearable devices. In this study, conductive porous sensors with complex triply periodic minimal surface (TPMS) structures were fabricated using the 3D printed sacrificial mold and enhancement of MWCNTs. A new curing routine by the self-resistance electric heating was implemented. The porous sensors were designed with different pore sizes and unit cell types of the TPMS (Diamond (D), Gyroid (G), and I-WP (I)). The impact of pore characteristics and the hybrid fabrication technique on the compressive properties and piezoresistive response of the developed porous sensors was studied. The results indicate that the porous sensors cured by the self-resistance electric heating could render a uniform temperature distribution in the composites and reduce the voids in the walls, exhibiting a higher elastic modulus and a better piezoresistive response. Among these specimens, the specimen with the D-based structure cured by self-resistance electric heating showed the highest responsive strain (61%), with a corresponding resistance response value of 0.97, which increased by 10.26% compared to the specimen heated by the external heat sources. This study provides a new perspective on design and fabrication of porous materials with piezoresistive functionalities, particularly in the realm of flexible and portable piezoresistive sensors.
RESUMEN
Blockade of the programmed death 1 (PD-1)/ programmed death ligand 1 (PD-L1) immune checkpoint could increase antitumor immunotherapy for multiple types of cancer, but the response rate of patients is about 10%-40%. Peroxisome proliferator activated receptor γ (PPARγ) plays an important role in regulating cell metabolism, inflammation, immunity, and cancer progression, while the mechanism of PPARγ on cancer cell immune escape is still unclear. Here we found that PPARγ expression exhibits a positive correlation with activation of T cells in non-small-cell lung cancer (NSCLC) by clinical analysis. Deficiency of PPARγ promoted immune escape of NSCLC by inhibiting T-cell activity, which was associated with increased PD-L1 protein level. Further analysis showed that PPARγ reduced PD-L1 expression independent of its transcriptional activity. PPARγ contains the microtubule-associated protein 1A/1B-light chain 3 (LC3) interacting region motif, which acts as an autophagy receptor for PPARγ binding to LC3, leading to degradation of PD-L1 in lysosomes, which in turn suppresses NSCLC tumor growth by increasing T-cell activity. These findings suggest that PPARγ inhibits the tumor immune escape of NSCLC by inducing PD-L1 autophagic degradation.
Asunto(s)
Carcinoma de Pulmón de Células no Pequeñas , Neoplasias Pulmonares , Humanos , Carcinoma de Pulmón de Células no Pequeñas/patología , Neoplasias Pulmonares/patología , Antígeno B7-H1 , PPAR gamma , Escape del TumorRESUMEN
Point defects with different species are concentrated on most mechanically machined fused silica optical surfaces with surface defects, which would sharply decrease the laser damage resistance under intense laser irradiation. Various point defects have distinct roles in affecting the laser damage resistance. Especially, the proportions of various point defects have not been identified, posing the challenge in relating the intrinsic quantitative relationship among various point defects. To fully reveal the comprehensive effect of various point defects, it is necessary to systematically explore the origins, evolution laws and especially the quantitative relationship among point defects. Herein, seven types of point defects are determined. The unbonded electrons in point defects are found to tend to be ionized to induce laser damage and there is a definite quantitative relationship between the proportions of oxygen-deficient point defects and that of peroxide point defects. The conclusions are further verified based on the photoluminescence (PL) emission spectra and the properties (e.g., reaction rule and structural feature) of the point defects. On basis of the fitted Gaussian components and electronic-transition theory, the quantitative relationship between PL and the proportions of various point defects is constructed for the first time. E'-Center accounts for the highest proportion among them. This work is beneficial for fully revealing the comprehensive action mechanisms of various point defects and providing new insights in elucidating the defect-induced laser damage mechanisms of optical components under intense laser irradiation from the atomic scale.
RESUMEN
Recently and interestingly, experiments show that the CO2 laser conditioning can significantly increase the laser-induced damage threshold (LIDT) of fused silica optics, but its underlying mechanism has not been clearly revealed. This Letter reports the experimental studies on the evolution of the intrinsic point defects and intrinsic ring structures on the surface of fused silica optics under the CO2 laser irradiation. The laser conditioning can effectively reduce the intrinsic defect contents in the surface layer of mechanically processed fused silica. However, the suppression effect of defects can be affected by the initial surface state. If there are micro-cracks on the component surface, the effect of the laser conditioning would be limited. The evolution of the intrinsic ring structures indicate that most of the intrinsic defects tend to recombine as short (Si-O)n ring structures during the laser healing of the micro-fractures. The observed recombination behavior and suppression of the intrinsic defects can help find out the reason for the increase of the LIDT of the fused silica optics.
RESUMEN
KDP (KH2PO4) crystal optics are the key elements for megajoule laser facilities. Nanoscale surface defects would cause laser-induced damage when the optics are irradiated by a high-fluence laser (over 10 J/cm2). Dip-pen nanolithography (DPN) could be used to repair the nanoscale surface defects in the KDP optics by the water meniscus. The high humidity required for high-efficiency and soft KDP surfaces penetrated by the AFM probe brings challenges for accurately predicting the water meniscus shape to evaluate the effectiveness of the DPN water-dissolution repairing. The multisolutions of the Young-Laplace and Kelvin equations also lead to the wrong water meniscus shape. A theoretical model that takes the high humidity and the penetration of the AFM probes into account is developed. The parametrization Young-Laplace equations are adopted for the zero contact angle of the water films, and the AFM probe is treated as the combination of the cone and sphere for the water meniscus whose size is larger than the AFM tip radius under high humidity. The penetration of the AFM probe is modeled by Hertz theory. Both the water films (3.3 nm thickness at 99% relative humidity) and indentations (1.46 nm depth at 300 nN contact force) are non-negligible for the nanoscale water meniscus between the KDP surface and the AFM probe. Moreover, the rough-fine two-step method is proposed to lock the correct solution of the Young-Laplace and Kelvin equations. The effectiveness of the proposed model is verified by comparison with reported ESEM images and pull-off forces. In addition, the overgrowth dots on the KDP surface are compared with the water meniscus. The linear growth of the water meniscus would cause the linear growth of the overgrowth dot, which proves the proposed model could be used to guide the DPN water-dissolution repairing for the nanoscale surface defects in the KDP optics.
RESUMEN
BACKGROUND: To develop a new modality of colorectal cancer screening based on chronic disease management (CDM) to improve the participation rate of screening, and maximize the benefits of limited resources. METHODS: Patients under CDM were assigned to screening intervention group (SI) and screening control group1 (SC1), residents from natural community were assigned to screening control group2 (SC2). A parallel controlled community intervention study was performed. Only SI would achieve "one-to-one" intervention services. Meanwhile, 200 subjects were selected from each of the three groups for the Knowledge-Attitude-Practice (KAP) questionnaire before and after intervention, named questionnaire intervention group(QI), questionnaire control group1(QC1) and questionnaire control group2(QC2). The outcome of the intervention was evaluated using the difference-in-differences method and multiple regression analysis. RESULTS: The preliminary screening participation rate was 43.63%(473/1084) in SI, 14.32%(132/922) in SCI, and 5.87%(105/1789) in SC2. The baseline questionnaire showed low knowledge scores in the three questionnaire groups with no statistically significant differences, while attitude scores in QI and QC1 were significantly higher than QC2. The differences between baseline and terminal showed QI increased larger in knowledge and attitude scores than QC1 and QC2, while no difference was detected between QC1 and QC2. CONCLUSION: The colorectal cancer screening model based on chronic disease management effectively improved the screening participation rate, and the "one-to-one" intervention and the inherent characteristics of the patient population under CDM were the core elements of the new modality.
Asunto(s)
Neoplasias Colorrectales , Detección Precoz del Cáncer , Humanos , Detección Precoz del Cáncer/métodos , Neoplasias Colorrectales/epidemiología , Conocimientos, Actitudes y Práctica en Salud , Análisis Multivariante , Manejo de la Enfermedad , Tamizaje MasivoRESUMEN
OBJECTIVE: Our present study utilized case-control research to explore the relationship between specific circRNAs and pediatric obesity through a literature review and bioinformatics and to predict their possible biological functions, providing ideas for epigenetic mechanism studies of pediatric obesity. METHODS: CircRNAs related to pediatric obesity were preliminarily screened by a literature review and qRT-PCR. CircRNA expression in children with obesity (n = 75) and control individuals (n = 75) was confirmed with qRT-PCR in a case-control study. This was followed by bioinformatics analyses, such as GO analysis, KEGG pathway analysis, and ceRNA network construction. Multivariate logistic regression was utilized to analyze the effects of circRNAs on obesity. A receiver operating characteristic (ROC) curve was also drawn to explore the clinical application value of circRNAs in pediatric obesity. RESULTS: Has_circ_0046367 and hsa_circ_0000284 were separately validated to be statistically downregulated and upregulated, respectively, in the peripheral blood mononuclear cells of children with obesity and revealed as independent indicators of increased CHD risk [hsa_circ_0046367 (OR = 0.681, 95% CI: 0.480 ~ 0.967) and hsa_circ_0000284 (OR = 1.218, 95% CI: 1.041 ~ 1.424)]. The area under the ROC curve in the combined analysis of hsa_circ_0046367 and hsa_circ_0000284 was 0.706 (95% CI: 0.623 ~ 0.789). Enrichment analyses revealed that these circRNAs were actively involved in neural plasticity mechanisms, cell secretion and signal regulation. CONCLUSION: The present research revealed that low expression of hsa_circ_0046367 and high expression of hsa_circ_0000284 are risk factors for pediatric obesity and that neural plasticity mechanisms are closely related to obesity.
Asunto(s)
Obesidad Infantil , ARN Circular , Niño , Humanos , ARN Circular/genética , Obesidad Infantil/genética , Estudios de Casos y Controles , Leucocitos Mononucleares , Biología ComputacionalRESUMEN
BACKGROUND: Residential surrounding greenness may be protective of dyslipidemia are often theorized but remain poorly quantified. In particular, the underlying biological mechanisms of blood lipid changes with green spaces remain unclear. METHODS: Our observational epidemiology study included a residentially stable sample of 1035 coronary heart disease patients, and proteomics study included 16 participants. Normalized Difference Vegetation Index (NDVI) was used to evaluate residential greenness exposures. Proteomics technology was used to identify plasma greenness-related proteome disturbance, and the pathway analysis was employed to evaluate the potential biological mechanisms of greenness decreasing dyslipidemia risk. RESULT: Higher residential surrounding greenness in the 500-m area was associated with lower risks of dyslipidemia (odds ratio (OR) = 0.871, 95% confidence interval (CI): 0.763, 0.994 for per one-quartile NDVI increase). Lymphocytes mediated 18.7% of the association between greenness and dyslipidemia. Greenness related proteins (including PLXDC1, IGFBP2 and LY6D) may regulate the biological functions of lipid metabolism and transport-related proteins (including ADIPOQ and CES1) through a series of biological processes. CONCLUSION: People in greener surroundings have a lower risk of dyslipidemia, which may be due to their lower inflammation, stronger lipid transporter activity, and normal cholesterol metabolism.
Asunto(s)
Enfermedad Coronaria , Dislipidemias , Dislipidemias/epidemiología , Humanos , Lípidos , Proteínas de Neoplasias , Parques Recreativos , Proteómica , Receptores de Superficie CelularRESUMEN
The machining-induced cracks and other defects on the surface of fused silica would incur damage when irradiated by intense lasers, which greatly shortens the service life of the fused silica optical components. The high absorption coefficient of fused silica for far-infrared lasers makes it possible to use low-energy CO2 lasers to melt and heal micro defects on the surface, and hence improve its damage threshold under the service conditions of extremely intense laser. However, the air in the cracks may evolve into bubbles during the laser healing process, but the law of crack morphology evolution and the bubble formation mechanism have not been clearly revealed. In this work, a simulation model of the healing process of fused silica surface cracks under the effect of low-energy CO2 laser is established. Three bubble formation mechanisms (i.e., the uneven fluidity caused by temperature gradient, the collapse effect caused by inclined cracks, and the internal cracks) are identified based on the simulation results of cracks with various original morphologies and characteristic structural parameters. The simulated fused silica morphology is consistent with the results of the laser healing experiment. This work can provide theoretical guidance for the optimization of optical manufacturing parameters of fused silica, as well as the CO2 laser healing and polishing strategies.
RESUMEN
BACKGROUND: Internet hospitals in China are being rapidly developed as an innovative approach to providing health services. The ongoing COVID-19 pandemic has triggered the development of internet hospitals that promote outpatient service delivery to the public via internet technologies. To date, no studies have assessed China's internet hospitals during the COVID-19 pandemic. OBJECTIVE: This study aimed to elucidate the characteristics of China's internet hospitals and assess the health service capacity of these hospitals. METHODS: Data on 711 internet hospitals were collected from official websites, the WeChat (Tencent Inc) platform, smartphone apps, and the Baidu search engine until July 16, 2020. RESULTS: As of July 16, 2020, 711 internet hospitals were developed in mainland China. More than half of these internet hospitals (421/711, 59.2%) were established during 2019 (206/711, 29%) and 2020 (215/711, 30.2%). Furthermore, about one-third (215/711, 30.2%) of internet hospitals were established at the beginning of 2020 as an emergency response to the COVID-19 epidemic. The 711 internet hospitals consisted of the following 3 types of hospitals: government-oriented (42/711, 5.91%), hospital-oriented (143/711, 20.11%), and enterprise-oriented internet hospitals (526/711, 73.98%). The vast majority of internet hospitals were traditional hospitals (526/711, 74%). Nearly 46.1% (221/711) of internet hospitals requested doctors to provide health services at a specific web clinic. Most patients (224/639, 35.1%) accessed outpatient services via WeChat. Internet hospitals' consulting methods included SMS text messaging consultations involving the use of graphics (552/570, 96.8%), video consultations (248/570, 43.5%), and telephone consultations (238/570, 41.8%). The median number of available web-based doctors was 43, and the median consultation fees of fever clinics and other outpatient clinics were ¥0 (US $0) per consultation and ¥6 (US $0.93) per consultation, respectively. Internet hospitals have provided various services during the COVID-19 pandemic, including medical prescription, drug delivery, and medical insurance services. CONCLUSIONS: The dramatic increase of internet hospitals in China has played an important role in the prevention and control of COVID-19. Internet hospitals provide different and convenient medical services for people in need.
Asunto(s)
COVID-19/epidemiología , SARS-CoV-2/patogenicidad , Telemedicina/métodos , COVID-19/terapia , China/epidemiología , Estudios Transversales , Análisis de Datos , Femenino , Hospitales , Humanos , Internet , Masculino , PandemiasRESUMEN
Diosgenin is widely distributed in many plants, such as Polygonatum sibiricum, Paris polyphylla, Dioscorea oppositifolia, Trigonella foenum-graecum, Costus speciosus, Tacca chantrieri, which has good anti-tumor activity and preferable effects on preventing atherosclerosis, protecting the heart, treating diabetes, etc. This review combed through the anti-tumor mechanisms of diosgenin encompassing lung, breast, gallbladder, liver, oral cavity, stomach, bladder, bone marrow, etc. Besides, it was discovered that diosgenin mainly exerts its effect by inhibiting tumor cell migration, suppressing tumor cell proliferation and growth, and inducing cell apoptosis. However, problems like low yield and bioavailability frequently exist in natural diosgenin. This review introduced methods such as structural modification, dosage form optimization and combination medication to improve the yield and anti-tumor activity of diosgenin. Via the summary of this paper, it is expected to provide theoretical basis for the rational exploitation and utilization of diosgenin.
Asunto(s)
Productos Biológicos , Diosgenina , Trigonella , Apoptosis , Proliferación Celular , Diosgenina/farmacologíaRESUMEN
Manufacturing-induced surface defects are deemed as a potential source, leading the laser-induced damage threshold (LIDT) of the actual KDP crystal optics to be much lower than the intrinsic one. However, the underlying mechanisms have not been fully recognized. We explore the combined modulation of incident laser light by multiple scratches and their effects on laser damage performance of KDP optics by modeling the light intensifications and performing a laser damage test. Under the combined modulation of multiple scratches, enhanced hot spots are generated due to the focusing effects of convex lens profiles surrounded by the neighboring scratches. The combined modulation actions are much stronger than that of a single scratch. The relative light intensities (IRs) caused by multiple scratches can reach up to two times, and the number of hot spots (IPs) are four times as large as those by a single scratch. The IRs exhibit a general, increasing tendency as the scratch density increases. But for the case of double total reflections of rear-surface scratches, the totally reflected lights are transmitted through neighboring scratches, resulting in decreasing tendency of IRs. The tested LIDTs and optical transmittances of multiple scratches present a gradual, decreasing tendency with the increase of scratch density, which agrees with the simulation results. Besides, the simulated light intensifications could well explain the locations of laser damage, which further verify the role of multiple scratches in lowering the laser damage resistance.
RESUMEN
Micro-milling has been proved to be the most effective method to mitigate the growth of laser-induced surface damage on potassium dihydrogen phosphate (KDP) crystals used in high power laser systems. However, the secondary peak of downstream light field modulation caused by Gaussian mitigation pits on the rear KDP surface would cause potential risk to damage downstream optics. In order to explore the effect of the mitigation pits on the secondary peak, we numerically calculated the downstream light field modulations caused by Gaussian mitigation pits on the rear KDP surface based on the angular spectrum diffraction theory. The results suggest that the secondary peaks are dependent on the parameters of the width, depth, depth error and title error. Among them, the tilt error and depth have greater influence on the mitigation effect. To reduce the laser damage risk caused by the secondary peak, the depth of the pre-designed mitigated contour should be optimized according to the actual operating conditions. The tilt error and depth error are proposed to be controlled within 1' and 2 µm, respectively, during the micro-milling. Also, the experiments verified the calculation results of downstream modulations and the effects of these parameters on the secondary peak. This work can not only provide available models for evaluating the laser damage risk of secondary peak caused by mitigation pits on the KDP surface but also contribute to the development of optimal micro-milling parameters for laser damage mitigation as well as the installation strategy of optical components employed in the high power laser systems.
RESUMEN
Paraquat (PQ), a broad-spectrum contact herbicide, has been used in many countries for controlling weed growth in agriculture because of its quick-acting and nonselective contact with green plant tissue. PQ is also toxic to humans, and even contributes to the development of neurodegenerative diseases. However, PQ is generally excluded from pesticide residue monitoring programs due to the lack of suitable determination methods. Thus, this study developed a detection method combined with simple extraction and surface-enhanced Raman spectroscopy (SERS) to rapidly determine and quantify the PQ residue on legumes without destructive procedures and high-cost instruments. Following the extraction procedure of the QuPPe-method, however, we took whole adzuki beans (Vigna angularis) extracted via a mixture of methanol and 1% formic acid at room temperature and followed by a 1 min cleanup by SPE. The PQ values for adzuki beans determined by LC/MSMS showed that regardless of whether extraction was followed by the QuPPe-method or the method we proposed, a consistent and low relative standard deviation (RSD) below <22% was found. In this study, we proposed to extract PQ on the surface of the beans by shaking briefly with solvent, and then the PQ molecules were detected and quantified by depositing Ag nanoparticles (AgNPs) and performing SERS within 10 min. Using a coating of deposited Ag nanoparticles, SERS can achieve a limit of detection (LOD) for PQ on the order of 1 µg L-1 (â¼4 × 10-9 M) and a method detection limit (MDL) for adzuki beans of 0.8 µg kg-1 (â¼3.3 × 10-9 M). This sensitivity at the ppb level absolutely met the maximum residue limit (MRL) for PQ in dried beans as declared by most countries, including the US (0.3 mg kg-1), Australia (1.0 mg kg-1) and Taiwan (0.2 mg kg-1). Taiwan will ban the use of PQ as a defoliating agent for harvest in adzuki bean fields in 2019; therefore, developing a method for detecting PQ residues in the field or in import markets is necessary for consumer health and for authorities. This study provided an opportunity to utilize SERS in the field of on-site pesticide residue screening.
RESUMEN
In high power laser systems, precision micro-machining is an effective method to mitigate the laser-induced surface damage growth on potassium dihydrogen phosphate (KDP) crystal. Repaired surfaces with smooth spherical and Gaussian contours can alleviate the light field modulation caused by damage site. To obtain the optimal repairing structure parameters, finite element method (FEM) models for simulating the light intensification caused by the mitigation pits on rear KDP surface were established. The light intensity modulation of these repairing profiles was compared by changing the structure parameters. The results indicate the modulation is mainly caused by the mutual interference between the reflected and incident lights on the rear surface. Owing to the total reflection, the light intensity enhancement factors (LIEFs) of the spherical and Gaussian mitigation pits sharply increase when the width-depth ratios are near 5.28 and 3.88, respectively. To achieve the optimal mitigation effect, the width-depth ratios greater than 5.3 and 4.3 should be applied to the spherical and Gaussian repaired contours. Particularly, for the cases of width-depth ratios greater than 5.3, the spherical repaired contour is preferred to achieve lower light intensification. The laser damage test shows that when the width-depth ratios are larger than 5.3, the spherical repaired contour presents higher laser damage resistance than that of Gaussian repaired contour, which agrees well with the simulation results.