Fluoroether Double-Chain Phosphate Surfactants: An Exploration of Alternatives to Fluorotelomer Surfactants.

While legacy fluorosurfactants have already been categorized as persistent organic pollutants, there appeared to be many strategies to develop alternatives. In this work, fluoroether double-chain phosphate surfactants (C72 diPAP-Na and C72 diPAP-NH4) were designed and synthesized with the initial intention of exploring the creation of new fluorosurfactants containing oxygen heteroatoms in the fluorocarbon chain segments to provide an alternative to the legacy long-chain fluorosurfactants. Furthermore, it was expected that they would even exceed the existing 6:2 fluorotelomer surfactants (6:2 diPAP-Na and 6:2 diPAP-NH4). Compared with characterizations of surface activity, foam performance, and wettability, the results showed that each of them has its own distinctive performance. Although the C72 series as new fluoroether surfactants cannot fully replace the 6:2 series of fluorosurfactants in terms of performance, there is a possibility of substitution in some aspects, which is of positive significance for further exploration to improve alternatives to legacy fluorosurfactants.

Fabrication of Two-Dimensional Homo-Bimetallic Porphyrin Framework Thin Films for Optimizing Nonlinear Optical Limiting.

Developing efficient metal-organic framework (MOF) optical devices with tunable third-order nonlinear optical (NLO) properties is an important challenge for scientific research and practical application. Herein, 2D monometallic and hetero/homo-bimetallic porphyrin MOF thin films (ZnTCPP(M) M = H2, Fe, Zn) were fabricated using the liquid-phase epitaxial (LPE) layer-by-layer (LBL) method to investigate the metal substitution dependent third-order NLO behavior. The prepared homo-bimetallic ZnTCPP(Zn) thin film exhibited enhanced third-order NLO performance with a higher third-order nonlinear susceptibility of ∼4.21 × 10-7 esu compared to monometallic and hetero-bimetallic counterparts. Additionally, theoretical calculations were performed to complement the experimental findings and revealed that the enhanced NLO effect of the ZnTCPP(Zn) thin film is mainly attributed to the enhanced local excitation. These findings not only provide a comprehensive understanding of the relationship between metal types and the NLO behavior of porphyrin MOF thin films but also offer valuable insights into the design and optimization of NLO devices.

Synthesis, Surface Activity, and Foamability of Two Short-Chain Fluorinated Sulfonate Surfactants with Ether Bonds.

Fluorinated surfactants are widely used in many fields because of their excellent surface active properties, but their high stability has caused many environmental problems. With the ban and restriction of classical long-chain fluorinated surfactants such as perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) worldwide, the development and replacement of their alternatives is now a major challenge. How to reduce environmental persistence, bioaccumulation, and biotoxicity while maintaining high surface activity has become an important issue in the development of fluorinated surfactants. Using short-chain fluorinated surfactants is one of the important solutions to resolve the pollution of organic fluorinated compounds. In this article, we synthesized two short-chain fluorinated surfactants with ether bonds. One of them 6:2 FTESNa (2) used the perfluoroalkyl chain (n-C6F13-) and the other C72 FEESNa (4) used the fluoroether segment with six fluorinated carbons and two oxygens (CF3OCF(CF3)CF2OCF(CF3)). The surface activity, foam performance, and wettability of the two molecules were measured. The surface tensions at critical micelle concentration (γcmc) and the critical micelle concentration (cmc) of 2 and 4 were 17.6 mN/m (2.2 g/L) and 20.2 mN/m (4.6 g/L), respectively. Both of them were significantly superior to the surface activity of 6:2 FTSNa (7) which is one of the current alternatives for PFOS. Additionally, the foamability and foam stability of both 2 and 4 were better than that of 7. In the aspect of wettability on PTFE, that of 4 was greater than those of 2 and 7. In summary, this work provided a new choice for alternatives of PFOS and PFOA.

Deoxygenation of ClSO2CF2COOMe with Triphenylphosphine for the Metal-Free Direct Electrophilic Difluoroalkylthiolation of Various Heterocycles.

A direct electrophilic difluoroalkylthiolation reaction of indole derivatives and other electron-rich heterocycles using methyl 2,2-difluoro-2-(chlorsulfonyl)acetate (ClSO2CF2COOMe) derived from Chen's reagent (FSO2CF2COOMe) is described. The ester group in the product can be further utilized in subsequent versatile transformations. The reactions provide good yields of the corresponding difluoroalkylthiolation products and exhibit high functional group compatibility. It is expected to serve as an alternative and practical protocol for difluoroalkylthiolation of various heterocycles.

Copper-catalyzed three-component reaction of arylhydrazine hydrochloride, DABSO, and NFSI for the synthesis of arenesulfonyl fluorides.

This paper reports a convenient copper-catalyzed three-component conversion of arylhydrazine hydrochlorides to arenesulfonyl fluorides in good yields under mild conditions, using 1,4-diazabicyclo [2.2.2]octane bis(sulfur dioxide) (DABSO) as a sulfonyl source and N-fluorobenzenesulfonimide (NFSI) as a fluorine source based on a radical sulfur dioxide insertion and fluorination strategy. Notably, arylhydrazine hydrochloride is used as a safe precursor of aryl radicals.

DNase1L3 suppresses hepatocellular carcinoma growth via inhibiting complement autocrine effect.

Hepatocellular carcinoma (HCC) is one of the most aggressive types of cancer and currently lacks effective treatment strategies. The present study revealed that deoxyribonuclease 1 like 3 (DNase1L3) expression levels were significantly downregulated in numerous types of gastrointestinal cancer, and especially in HCC. Tissue microarrays were further used to illustrate that DNase1L3 expression levels were frequently downregulated in HCC tissues compared with normal liver tissues. In addition, DNase1L3 expression levels were identified to be significantly associated with tumor size (p=0.0028), tumor thrombus formation (p<0.01), and a poorer overall survival (p=0.005) and disease-free survival (p=0.006) of HCC. Gene Ontology functional term enrichment analysis of biological processes discovered that DNase1L3 was significantly associated with complement activation. Further studies demonstrated that the ectopic expression of DNase1L3 suppressed cell growth and inhibited the PI3K/AKT signaling pathway activation following C3a receptor agonist treatment. In conclusion, the findings of the present study suggested, for the first time, that DNase1L3 may serve as a biomarker for the prognosis of patients with HCC, and may suppress HCC growth via inhibiting the PI3K/AKT signaling pathway.

In situ synthesis of polypyrrole on graphite felt as bio-anode to enhance the start-up performance of microbial fuel cells.

This study introduces an effective method to deposit polypyrrole (PPy) on graphite felt (GF) as anode to improve the start-up performance of microbial fuel cells (MFCs). The results of scanning electron microscope (SEM) and electrochemical testing reveal that polypyrrole is able to improve the electrical conductivity and surface roughness, which is beneficial to the microorganism attachment and growth. It shows that microorganisms grow faster on polypyrrole-modified anode than on unmodified anode. It takes ca. 5 days for polypyrrole-modified anode to reach a reproducible voltage platform, while it takes 11 days for unmodified anode. Moreover, the maximum power density of microbial fuel cells with polypyrrole-modified anode was 919 mW m-2, which were 2.3 times of that with unmodified anode. This research revealed that polypyrrole modification can improve the start-up performance of microbial fuel cells. It is considered as a feasible, economical and sustainable anode.

Insights into Charge Transfer at an Atomically Precise Nanocluster/Semiconductor Interface.

The deposition of an atomically precise nanocluster, for example, Ag44 (SR)30 , onto a large-band-gap semiconductor such as TiO2 allows a clear interface to be obtained to study charge transfer at the interface. Changing the light source from visible light to simulated sunlight led to a three orders of magnitude enhancement in the photocatalytic H2 generation, with the H2 production rate reaching 7.4 mmol h-1 gcatalyst -1 . This is five times higher than that of TiO2 modified with Ag nanoparticles and even comparable to that of TiO2 modified with Pt nanoparticles under similar conditions. Energy band alignment and transient absorption spectroscopy reveal that the role of the metal clusters is different from that of both organometallic complexes and plasmonic nanoparticles: A type II heterojunction charge-transfer route is achieved under UV/Vis irradiation, with the cluster serving as a small-band-gap semiconductor. This results in the clusters acting as co-catalysts rather than merely photosensitizers.

Zinc-Mediated Intermolecular Reductive Radical Fluoroalkylsulfination of Unsaturated Carbon-Carbon Bonds with Fluoroalkyl Bromides and Sulfur Dioxide.

A versatile and general zinc-mediated intermolecular reductive radical fluoroalkylsulfination of unsaturated C-C bonds has been developed using readily available fluoroalkyl bromides and 1,4-diazabicyclo[2.2.2]octane-bis(sulfur dioxide) adduct (DABSO) with wide substrate scope and excellent functional group tolerance. Sulfur dioxide anion radical generated in situ from the reduction of sulfur dioxide with zinc may be involved in the reaction mechanism.

Atomically Precise Bimetallic Nanoclusters as Photosensitizers in Photoelectrochemical Cells.

The atomically precise bimetallic nanocluster (NC), Au24 Ag20 (PhCC)20 (SPy)4 Cl2 (1) (Py=pyridine), was employed for the first time as a stable photosensitizer for photoelectrochemical applications. The sensitization of TiO2 nanotube arrays (TNA) with 1 greatly enhances the light-harvesting ability of the composite because 1 shows a high molar extinction coefficient (ϵ) in the UV/Vis region. Compared to a more standard Au25 (SG)18 -TNA (2-TNA; SG=glutathione) composite, 1-TNA shows a much better stability under illumination in both neutral and basic conditions. The precise composition of the photosensitizers enables a direct comparison of the sensitization ability between 1 and 2. With the same cluster loading, the photocurrent produced by 1-TNA is 15 times larger than that of 2-TNA. The superior performance of 1-TNA over 2-TNA is attributed not only to the higher light absorption ability of 1 but also to the higher charge-separation efficiency. Besides, a ligand effect on the stability of the photoelectrode and charge-transfer between the NCs and the semiconductor is revealed. This work paves the way to study the role of metal nanoclusters as photosensitizers at the atomic level, which is essential for the design of better material for light energy conversion.

Visible Light-Induced Radical Cyclization of Tertiary Bromides with Isonitriles To Construct Trifluoromethylated Quaternary Carbon Center.

The reaction of trifluoromethylated tertiary bromides with isonitriles induced by visible light is reported. Defluorination was avoided in a radical process. This method provides an efficient approach to compounds containing a trifluoromethylated quaternary carbon center, most of which show excellent potential to be agrochemicals. In addition, the bromides were prepared from perfluoroisobutylene, which is a waste from industry, after several steps. This reaction shows a feasible transfer of harmful waste into useful compounds.

Oxidative Radical Intermolecular Trifluoromethylthioarylation of Styrenes by Arenediazonium Salts and Copper(I) Trifluoromethylthiolate.

An efficient oxidative radical intermolecular trifluoromethylthioarylation of styrenes with arenediazonium salts and copper(I) trifluoromethylthiolate under mild conditions is described for the first time. The reactions provide good yields of the corresponding trifluoromethylthioarylation products with broad substrate scope and excellent functional group compatibility.

Molecule mechanism for regulating stomatal development in plants.

Stomata are small adjustable pores on the surface (epidermis) of land plants that act as a main conduit for gas exchange. They not only play an essential role in photosynthesis of green plants but also exert an important influence on the global carbon and water cycle. There are great differences between monocots and dicots in distribution and morphological structure of the stomata, affecting the species-specific regulation of stomatal development. In this review, we summarize the molecular regulation networks associated with stomatal precursor cell fate determination and the epigenetic mechanisms on regulation of polar cell division. We also outline the stomatal development processes mediated by crosstalk between exogenous and intrinsic signals, and propose a model of multilevel regulation of stomatal development.

Trifluoromethylfluorosulfonylation of Unactivated Alkenes Using Readily Available Ag(O2 CCF2 SO2 F) and N-Fluorobenzenesulfonimide.

Presented is a novel intermolecular radical trifluoromethylfluorosulfonylation of unactivated alkenes under mild reaction conditions with good functional-group tolerance in the most atom-economic manner by using readily available Ag(O2 CCF2 SO2 F) and N-fluorobenzenesulfonimide (NFSI). Both the trifluoromethyl and sulfonyl groups in the products originate from Ag(O2 CCF2 SO2 F).

Visible Light-Induced Photoredox Construction of Trifluoromethylated Quaternary Carbon Centers from Trifluoromethylated Tertiary Bromides.

A mild, operationally simple, visible light-induced photoredox method for constructing novel trifluoromethylated quaternary carbon centers from trifluoromethylated tertiary bromides has been developed. Using this method, a wide range of alkenes were successfully bifunctionalized to γ-butyrolactams. As for electron-rich alkenes, reactions catalyzed by Ir(dF(CF3)ppy)2(dtbbpy)(PF6) were kinetic processes with high yields and short times. For styrenes, reactions catalyzed by Ir(ppy)2(dtbbpy)(PF6) were thermodynamic processes with moderate yields and prolonged reaction times. For aliphatic alkenes, the reactions were neither thermodynamic nor kinetic and fac-Ir(ppy)3 was used as catalyst. Thus, reactions were not as efficient as electron-rich alkenes. The atom-transfer radical addition reactions of trifluoromethylated tertiary bromides with alkynes were also achieved. The configuration of products we separated was E type only. Some of the products exhibited bactericidal activity.

Direct trifluoromethylthiolation of unactivated C(sp(3))-H using silver(I) trifluoromethanethiolate and potassium persulfate.

A practical and efficient method for the direct trifluoromethylthiolation of unactivated C(sp(3) )H bonds by AgSCF3 /K2 S2 O8 under mild conditions is described. The reaction has a good functional-group tolerance and good selectivity. Initial mechanistic investigations indicate that the reaction may involve a radical process in which K2 S2 O8 plays key roles in both the activation of the C(sp(3) )H bond and the oxidation of AgSCF3 .

Synthesis of α-trifluoromethyl ketones via the Cu-catalyzed trifluoromethylation of silyl enol ethers using an electrophilic trifluoromethylating agent.

A method has been developed for the synthesis of α-trifluoromethyl ketones via the Cu-catalyzed trifluoromethylation of silyl enol ethers with an electrophilic trifluoromethylating agent, which produces a trifluoromethyl radical.

Enantioselective Pd-catalyzed allylation of acyclic α-fluorinated ketones.

Significant synthetic challenges remain for the asymmetric synthesis of tertiary α-fluoro ketones, which are potentially useful molecules for the development of drugs, agrochemicals, and functional materials. Herein, we describe the development of a method for the catalytic enantioselective synthesis of tertiary α-fluoro ketones via the Tsuji-Trost reaction of racemic acyclic α-fluorinated ketones. Enantioenriched acyclic α-cabonyl tertiary fluorides can be produced with the aid of a palladium/phosphinooxazoline catalyst.

Oxidative coupling of benzylamines to imines by molecular oxygen catalyzed by cobalt(II) ß-tetrakis(trifluoromethyl)-meso-tetraphenylporphyrin.

Oxidative coupling of benzylamines to imines by molecular oxygen is efficiently realized in the presence of very low catalyst loadings of Co(II) ß-tetrakis(trifluoromethyl)-meso-tetraphenylporphyrin. Due to the effect of four ß-CF3 groups, the catalyst shows good selectivity and very high turnover number. The reaction is easily scaled up and may provide a convenient way to prepare many imines in large scale.

Organocatalytic reactions of α-trifluoromethylated esters with terminal alkenes at room temperature.

CF3-containing esters smoothly reacted with electron-deficient alkenes in the presence of a phosphine (2-dicyclohexylphosphino-2',4',6'-triisopropylbiphenyl) organocatalyst at room temperature in an aerobic atmosphere. These Michael reactions efficiently provided products with a CF3 quaternary carbon center.