A Mechanogenetic Toolkit for Interrogating Cell Signaling in Space and Time.

Tools capable of imaging and perturbing mechanical signaling pathways with fine spatiotemporal resolution have been elusive, despite their importance in diverse cellular processes. The challenge in developing a mechanogenetic toolkit (i.e., selective and quantitative activation of genetically encoded mechanoreceptors) stems from the fact that many mechanically activated processes are localized in space and time yet additionally require mechanical loading to become activated. To address this challenge, we synthesized magnetoplasmonic nanoparticles that can image, localize, and mechanically load targeted proteins with high spatiotemporal resolution. We demonstrate their utility by investigating the cell-surface activation of two mechanoreceptors: Notch and E-cadherin. By measuring cellular responses to a spectrum of spatial, chemical, temporal, and mechanical inputs at the single-molecule and single-cell levels, we reveal how spatial segregation and mechanical force cooperate to direct receptor activation dynamics. This generalizable technique can be used to control and understand diverse mechanosensitive processes in cell signaling. VIDEO ABSTRACT.

Magneto-acoustic protein nanostructures for non-invasive imaging of tissue mechanics in vivo.

Measuring cellular and tissue mechanics inside intact living organisms is essential for interrogating the roles of force in physiological and disease processes. Current agents for studying the mechanobiology of intact, living organisms are limited by poor light penetration and material stability. Magnetomotive ultrasound is an emerging modality for real-time in vivo imaging of tissue mechanics. Nonetheless, it has poor sensitivity and spatiotemporal resolution. Here we describe magneto-gas vesicles (MGVs), protein nanostructures based on gas vesicles and magnetic nanoparticles that produce differential ultrasound signals in response to varying mechanical properties of surrounding tissues. These hybrid nanomaterials significantly improve signal strength and detection sensitivity. Furthermore, MGVs enable non-invasive, long-term and quantitative measurements of mechanical properties within three-dimensional tissues and in vivo fibrosis models. Using MGVs as novel contrast agents, we demonstrate their potential for non-invasive imaging of tissue elasticity, offering insights into mechanobiology and its application to disease diagnosis and treatment.

Nanoscale Magneto-mechanical-genetics of Deep Brain Neurons Reversing Motor Deficits in Parkinsonian Mice.

Here, we introduce the magneto-mechanical-genetic (MMG)-driven wireless deep brain stimulation (DBS) using magnetic nanostructures for therapeutic benefits in the mouse model of Parkinson's disease (PD). Electrical DBS of the subthalamic nucleus (STN) is an effective therapy for mitigating Parkinson's motor symptoms. However, its broader application is hampered by the requirement for implanted electrodes and the lack of anatomical and cellular specificity. Using the nanoscale magnetic force actuators (m-Torquer), which deliver torque force under rotating magnetic fields to activate pre-encoded Piezo1 ion channels on target neurons, our system enables wireless and STN-specific DBS without implants, addressing key unmet challenges in the DBS field. In both late- and early-stage PD mice, MMG-DBS significantly improved locomotor activity and motor balance by 2-fold compared to untreated PD mice. Moreover, MMG-DBS enabled sustained therapeutic effects. This approach provides a non-invasive and implant-free DBS with cellular targeting capability for the effective treatment of Parkinsonian symptoms.

Electron beam-induced demetallation of Fe, Co, Ni, Cu, Zn, Pd, and Pt metalloporphyrins: insights in e-beam chemistry and metal cluster formations.

Electron beams are versatile tools for nanoscale fabrication processes, however, the underlying e-beam chemistry remains in its infancy. Through operando transmission electron microscopy investigations, we elucidate a redox-driven cargo release of individual metal atoms triggered by electron beams. The chosen organic delivery molecule, tetraphenylporphyrin (TPP), proves highly versatile, forming complexes with nearly all metals from the periodic table and being easily processed in solution. A comprehensive cinematographic analysis of the dynamics of single metal atoms confirms the nearly instantaneous ejection of complexed metal atoms under an 80 kV electron beam, underscoring the system's broad versatility. Providing mechanistic insights, we employ density functional theory to support the proposed reductive demetallation pathway facilitated by secondary electrons, contributing novel perspectives to electron beam-mediated chemical reaction mechanisms. Lastly, our findings demonstrate that all seven metals investigated form nanoclusters once ejected from TPP, highlighting the method's potential for studying and developing sustainable single-atom and nanocluster catalysts.

Hydrogel Magnetomechanical Actuator Nanoparticles for Wireless Remote Control of Mechanosignaling In Vivo.

As a new enabling nanotechnology tool for wireless, target-specific, and long-distance stimulation of mechanoreceptors in vivo, here we present a hydrogel magnetomechanical actuator (h-MMA) nanoparticle. To allow both deep-tissue penetration of input signals and efficient force generation, h-MMA integrates a two-step transduction mechanism that converts magnetic anisotropic energy to thermal energy within its magnetic core (i.e., Zn0.4Fe2.6O4 nanoparticle cluster) and then to mechanical energy to induce the surrounding polymer (i.e., pNiPMAm) shell contraction, finally delivering forces to activate targeted mechanoreceptors. We show that h-MMAs enable on-demand modulation of Notch signaling in both fluorescence reporter cell lines and a xenograft mouse model, demonstrating its utility as a powerful in vivo perturbation approach for mechanobiology interrogation in a minimally invasive and untethered manner.

Magnetogenetics with Piezo1 Mechanosensitive Ion Channel for CRISPR Gene Editing.

Regulation of genetic activity in single cells and tissues is pivotal to determine key cellular functions in current biomedicine, yet the conventional biochemical activators lack spatiotemporal precision due to the diffusion-mediated slow kinetics and nonselectivity. Here, we describe a magnetogenetic method for target-specific activation of a clustered regularly interspaced short palindromic repeats (CRISPR) system for the regulation of intracellular proteins. We used magnetomechanical force generated by the magnetic nanostructure to activate pre-encoded Piezo1, the mechanosensitive ion channel, on the target cell. The activated Piezo1 further triggers the intracellular Ca2+ signaling pathway, inducing the pre-encoded genes to express genes of interest (GOIs), which is Cas9 protein for the CRISPR regulation of the target proteins. We demonstrated that this magnetogenetic CRISPR system successfully edits the target genome for both in vitro and pseudo-in vivo environments, providing a versatile magnetic platform for remote gene editing of animals with various size scales.

Non-contact long-range magnetic stimulation of mechanosensitive ion channels in freely moving animals.

Among physical stimulation modalities, magnetism has clear advantages, such as deep penetration and untethered interventions in biological subjects. However, some of the working principles and effectiveness of existing magnetic neurostimulation approaches have been challenged, leaving questions to be answered. Here we introduce m-Torquer, a magnetic toolkit that mimics magnetoreception in nature. It comprises a nanoscale magnetic torque actuator and a circular magnet array, which deliver piconewton-scale forces to cells over a working range of ~70 cm. With m-Torquer, stimulation of neurons expressing bona fide mechanosensitive ion channel Piezo1 enables consistent and reproducible neuromodulation in freely moving mice. With its long working distance and cellular targeting capability, m-Torquer provides versatility in its use, which can range from single cells to in vivo systems, with the potential application in large animals such as primates.

Chemical Transformations of Anisotropic Platelets and Spherical Nanocrystals.

ConspectusInorganic nanocrystal design has been continuously evolving with a better understanding of the chemical reaction mechanisms between chemical stimuli and nanocrystals. Under certain conditions, molecular compounds can be effective as chemical stimuli to induce transformative reactions of nanocrystals toward new materials that would differ in geometric shape, composition, and crystallographic structure. To explore such evolutionary processes, two-dimensional (2D) layered transition-metal chalcogenide (TMC) nanostructures are an interesting structural platform because they not only exhibit unique transformation pathways due to their structural anisotropy but also present new opportunities for improved material properties for potential applications such as catalysis and energy conversion and storage. The high surface area/volume ratio, interlayer van der Waals (vdW) spacing, and different coordination states between the unsaturated edges and the fully saturated basal planes of the chalcogens are characteristic of 2D layered TMC nanostructures, which subsequently lead to anisotropic chemical processes during chemical transformations, such as regioselective reactions at the interfacial boundaries in the pathways for either porous or solid heteronanostructures. In this Account, we first discuss the chemical reactivity of 2D layered TMC nanostructures. By categorizing the external stimuli in terms of chemical principles, such as Lewis acid-base chemistry, a desirable regioselective chemical reaction can occur with controlled reactivity. In association with the knowledge obtained from the nanoscale chemical reactivity of 2D layered nanocrystals, similar efforts in other important morphologies such as 1D and isotropic 0D nanocrystals are introduced. For instance, for 1D and 0D metal oxide nanocrystals, the effects of molecular stimuli on the atomic-level changes in the crystal lattice are demonstrated, eventually leading to a variety of shape transformations.

Development of Integrated Systems for On-Site Infection Detection.

The modern healthcare system faces an unrelenting threat from microorganisms, as evidenced by global outbreaks of new viral diseases, emerging antimicrobial resistance, and the rising incidence of healthcare-associated infections (HAIs). An effective response to these threats requires rapid and accurate diagnostic tests that can identify causative pathogens at the point of care (POC). Such tests could eliminate diagnostic uncertainties, facilitating patient triaging, minimizing the empiric use of antimicrobial drugs, and enabling targeted treatments. Current standard methods, however, often fail to meet the needs of rapid diagnosis in POC settings. Culture-based assays entail long processing times and require specialized laboratory infrastructure; nucleic acid (NA) tests are often limited to centralized hospitals due to assay complexity and high costs. Here we discuss two new POC tests developed in our groups to enable the rapid diagnosis of infection. The first is nanoPCR that takes advantages of core-shell magnetoplasmonic nanoparticles (MPNs): (i) Au shell significantly accelerates thermocycling via volumetric, plasmonic light-to-heat conversion and (ii) a magnetic core enables sensitive in situ fluorescent detection via magnetic clearing. By adopting a Ferris wheel module, the system expedites multisamples in parallel with a minimal setup. When applied to COVID-19 diagnosis, nanoPCR detected SARS-CoV-2 RNA down to 3.2 copy/µL within 17 min. In particular, nanoPCR diagnostics accurately identified COVID-19 cases in clinical samples (n = 150), validating its clinical applicability. The second is a polarization anisotropy diagnostic (PAD) system that exploits the principle of fluorescence polarization (FP) as a detection modality. Fluorescent probes were designed to alter their molecular weight upon recognizing target NAs. This event modulates the probes' tumbling rate (Brownian motion), which leads to changes in FP. The approach is robust against environmental noise and benefits from the ratiometric nature of the signal readout. We applied PAD to detect clinically relevant HAI bacteria (Escherichia coli, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Staphylococcus aureus). The PAD assay demonstrated detection sensitivity down to the single bacterium level and determined both drug resistance and virulence status. In summary, these new tests have the potential to become powerful tools for rapid diagnosis in the infectious disease space. They do not require highly skilled personnel or labor-intensive analyses, and the assays are quick and cost-effective. These attributes will make nanoPCR and PAD well-aligned with a POC workflow to aid physicians to initiate prompt and informed patient treatment.

Magnetic Effect of Dopants on Bright and Dark Excitons in Strongly Confined Mn-Doped CsPbI3 Quantum Dots.

We investigated the magnetic effect of Mn2+ ions on an exciton of Mn-doped CsPbI3 quantum dots (QDs), where we looked for the signatures of an exciton magnetic polaron known to produce a large effective magnetic field in Mn-doped CdSe QDs. In contrast to Mn-doped CdSe QDs that can produce ∼100 T of magnetic field upon photoexcitation, manifested as a large change in the energy and relaxation dynamics of a bright exciton, Mn-doped CsPbI3 QDs exhibited little influence of a magnetic dopant on the behavior of a bright exciton. However, a µs-lived dark exciton in CsPbI3 QDs showed 40% faster decay in the presence of Mn2+, equivalent to the effect of ∼3 T of an external magnetic field. While further study is necessary to fully understand the origin of the large difference in the magneto-optic property of an exciton in two systems, we consider that the difference in antiferromagnetic coupling of the dopants is an important contributing factor.

Magnetothermally Activated Nanometer-level Modular Functional Group Grafting of Nanoparticles.

Nanoparticles with multifunctionality and high colloidal stability are essential for biomedical applications. However, their use is often hindered by the formation of thick coating shells and/or nanoparticle agglomeration. Herein, we report a single nanoparticle coating strategy to form 1 nm polymeric shells with a variety of chemical functional groups and surface charges. Under exposure to alternating magnetic field, nanosecond thermal energy pulses trigger a polymerization in the region only a few nanometers from the magnetic nanoparticle (MNP) surface. Modular coatings containing functional groups, according to the respective choice of monomers, are possible. In addition, the surface charge can be tuned from negative through neutral to positive. We adopted a coating method for use in biomedical targeting studies where obtaining compact nanoparticles with the desired surface charge is critical. A single MNP with a zwitterionic charge can provide excellent colloidal stability and cell-specific targeting.

Layered Aluminum for Electromagnetic Wave Absorber with Near-Zero Reflection.

Ideal electromagnetic (EM) wave absorbers can absorb all incident EM waves, regardless of the incident direction, polarization, and frequency. Absorptance and reflectance are intrinsic material properties strongly correlated with electrical conductivity; hence, achieving perfect absorptance with zero reflectance is challenging. Herein, we present a design strategy for preparing a nearly ideal EM absorber based on a layered metal that maximizes absorption by utilizing multiple internal reflections and minimizes reflection using a monotonic gradient of intrinsic impedance. This approach was experimentally verified using aluminum nanoflakes prepared via topochemical etching of lithium from Li9Al4, and the impedance-graded structure was obtained through the size-based sorting behavior of aluminum nanoflakes sinking in dispersion. Unlike in traditional shielding materials, strong absorption (26.76 dB) and negligible reflectivity (0.04 dB) with a ratio of >103 can be achieved in a 120 µm thick film. Overall, our findings exhibit potential for developing a novel class of antireflective shielding materials.

Fabrication and Imaging of Monolayer Phosphorene with Preferred Edge Configurations via Graphene-Assisted Layer-by-Layer Thinning.

Phosphorene, a monolayer of black phosphorus (BP), is an elemental two-dimensional material with interesting physical properties, such as high charge carrier mobility and exotic anisotropic in-plane properties. To fundamentally understand these various physical properties, it is critically important to conduct an atomic-scale structural investigation of phosphorene, particularly regarding various defects and preferred edge configurations. However, it has been challenging to investigate mono- and few-layer phosphorene because of technical difficulties arising in the preparation of a high-quality sample and damages induced during the characterization process. Here, we successfully fabricate high-quality monolayer phosphorene using a controlled thinning process with transmission electron microscopy and subsequently perform atomic-resolution imaging. Graphene protection suppresses the e-beam-induced damage to multilayer BP and one-side graphene protection facilitates the layer-by-layer thinning of the samples, rendering high-quality monolayer and bilayer regions. We also observe the formation of atomic-scale crystalline edges predominantly aligned along the zigzag and (101) terminations, which is originated from edge kinetics under e-beam-induced sputtering process. Our study demonstrates a new method to image and precisely manipulate the thickness and edge configurations of air-sensitive two-dimensional materials.

Intense Dark Exciton Emission from Strongly Quantum-Confined CsPbBr3 Nanocrystals.

Dark exciton as the lowest-energy (ground) exciton state in metal halide perovskite nanocrystals is a subject of much interest. This is because the superior performance of perovskites as the photon source combined with long lifetime of dark exciton can be attractive for many applications of exciton. However, the direct observation of the intense and long-lived dark exciton emission, indicating facile access to dark ground exciton state, has remained elusive. Here, we report the intense photoluminescence from dark exciton with microsecond lifetime in strongly confined CsPbBr3 nanocrystals and reveal the crucial role of confinement in accessing the dark ground exciton state. This study establishes the potential of strongly quantum-confined perovskite nanostructures as the excellent platform to harvest the benefits of extremely long-lived dark exciton.

Mechanoluminescent, Air-Dielectric MoS2 Transistors as Active-Matrix Pressure Sensors for Wide Detection Ranges from Footsteps to Cellular Motions.

Tactile pressure sensors as flexible bioelectronic devices have been regarded as the key component for recently emerging applications in electronic skins, health-monitoring devices, or human-machine interfaces. However, their narrow range of sensible pressure and their difficulty in forming high integrations represent major limitations for various potential applications. Herein, we report fully integrated, active-matrix arrays of pressure-sensitive MoS2 transistors with mechanoluminescent layers and air dielectrics for wide detectable range from footsteps to cellular motions. The inclusion of mechanoluminescent materials as well as air spaces can increase the sensitivity significantly over entire pressure regimes. In addition, the high integration capability of these active-matrix sensory circuitries can enhance their spatial resolution to the level sufficient to analyze the pressure distribution in a single cardiomyocyte. We envision that these wide-range pressure sensors will provide a new strategy toward next-generation electronics at biomachine interfaces to monitor various mechanical and biological phenomena at single-cell resolution.

Nanoscale Heat Transfer from Magnetic Nanoparticles and Ferritin in an Alternating Magnetic Field.

Recent suggestions of nanoscale heat confinement on the surface of synthetic and biogenic magnetic nanoparticles during heating by radio frequency-alternating magnetic fields have generated intense interest because of the potential utility of this phenomenon for noninvasive control of biomolecular and cellular function. However, such confinement would represent a significant departure from the classical heat transfer theory. Here, we report an experimental investigation of nanoscale heat confinement on the surface of several types of iron oxide nanoparticles commonly used in biological research, using an all-optical method devoid of the potential artifacts present in previous studies. By simultaneously measuring the fluorescence of distinct thermochromic dyes attached to the particle surface or dissolved in the surrounding fluid during radio frequency magnetic stimulation, we found no measurable difference between the nanoparticle surface temperature and that of the surrounding fluid for three distinct nanoparticle types. Furthermore, the metalloprotein ferritin produced no temperature increase on the protein surface nor in the surrounding fluid. Experiments mimicking the designs of previous studies revealed potential sources of the artifacts. These findings inform the use of magnetic nanoparticle hyperthermia in engineered cellular and molecular systems.

Morphology-Conserving Non-Kirkendall Anion Exchange of Metal Oxide Nanocrystals.

Nanoscale dynamic processes such as the diffusion of ions within solid-state structures are critical for understanding and tuning material properties in a wide range of areas, such as energy storage and conversion, catalysis, and optoelectronics. In the generation of new types of nanocrystals (NCs), diffusion-mediated ion exchange reactions have also been proposed as one of the most effective transformational strategies. However, retaining the original morphology and crystal structure of metal oxide NCs has been challenging because of Kirkendall void formation, and there has been no success, especially for anion exchange. Here we show that with the aid of an oxygen extracting reagent (OER), anion diffusion is dramatically accelerated and morphology-conserving anion exchange without Kirkendall void formation is possible. In the case of the conversion of Fe3O4 to Fe3S4, oxygen extraction and subsequent formation of the amorphous phase facilitate the migration of incoming sulfur anions by approximately 100-fold, which is close to the level of the outgoing cation diffusivity. We also demonstrate that the working principle of the morphology-conserving non-Kirkendall anion exchange is operative for metal oxide NCs with different shapes and crystal structures.

Recent Advances in the Solution-Based Preparation of Two-Dimensional Layered Transition Metal Chalcogenide Nanostructures.

The precise control in size/thickness, composition, crystal phases, doping, defects, and surface properties of two-dimensional (2D) layered transition metal chalcogenide (TMC) is important for the investigation of interwoven relationship between structures, functions, and practical applications. Of the multiple synthetic routes, solution-based top-down and bottom-up chemical methods have been uniquely important for their potential to control the size and composition at the molecular level in addition to their scalability, competitive production cost, and solution processability. Here, we introduce an overview of the recent advances in the solution-based preparation routes of 2D layered TMC nanostructures along with important scientific developments.

Size-dependent dark exciton properties in cesium lead halide perovskite quantum dots.

The fine structure of the band edge exciton and the dark exciton photoluminescence (PL) are topics of significant interest in the research of semiconducting metal halide perovskite nanocrystals, with several conflicting reports on the level ordering of the bright and dark states and the accessibility of the emitting dark states. Recently, we observed the intense dark exciton PL in strongly confined CsPbBr3 nanocrystals at cryogenic temperatures, in contrast to weakly confined nanocrystals lacking dark exciton PL, which was explained by the confinement enhanced bright-dark exciton splitting. In this work, we investigated the size-dependence of the dark exciton photoluminescence properties in CsPbBr3 and CsPbI3 quantum dots in the strongly confined regime, showing the clear role of confinement in determining the bright-dark energy splitting (ΔEBD) and the dark exciton lifetime (τD). We observe the increase in both ΔEBD and τD with increasing quantum confinement in CsPbBr3 and CsPbI3 QDs, consistent with the earlier predictions on the size-dependence of ΔEBD and τD. Our results show that quantum confinement plays a crucial role in determining the accessibility to the dark exciton PL and its characteristics in metal halide perovskite nanocrystals.