Workplace exposure to UV radiation and strategies to minimize cancer risk.

BACKGROUND: Workplace exposure to solar ultraviolet (UV) causes malignant melanoma and non-melanoma skin cancer. The evidence for beneficial effects of solar UV exposure in reducing the risks for other cancers is increasing. The intensity of UV radiation at the Earth's surface is dependent on latitude, but even in northern European countries exposure can be high enough for outdoor work to cause skin cancer. GROWING POINTS: Awareness of the health risks and benefits of occupational solar UV exposure is poor. Actions to reduce the risk of skin cancer have been identified and employers should recognize their responsibility to actively manage these risks. There is evidence for reduced risks for breast, ovarian and colorectal cancer and possibly other cancers linked to solar UV exposure. SOURCES OF DATA: This narrative review draws on published scientific articles and material designed to assist identifying strategies to protect workers from solar UV exposure. AREAS OF AGREEMENT: Solar UV exposure can be harmful. Wavelengths in the UVB range are more effective in causing erythema and DNA damage. Solar UV is the main source of vitamin D for most people. Primary and secondary prevention for skin cancer can potentially eliminate these risks but the evidence for effectiveness is limited. AREAS OF CONTROVERSY: Potential health benefits of UV exposure, particularly for reduced cancer risk. Determining and communicating optimal exposure to maximize health benefits. The risk of non-melanoma skin cancers may be more than doubled for some workers in temperate latitudes. AREAS TIMELY FOR DEVELOPING RESEARCH: Exposure-response epidemiological studies; studies of the health benefits of occupational UV exposure; studies of the effectiveness of intervention strategies to prevent skin cancer. Use of low-cost UV sensors in workplaces.

Ambient particulate matter and biomass burning: an ecological time series study of respiratory and cardiovascular hospital visits in northern Thailand.

BACKGROUND: Exposure to particulate matter (PM) emitted from biomass burning is an increasing concern, particularly in Southeast Asia. It is not yet clear how the source of PM influences the risk of an adverse health outcome. The objective of this study was to quantify and compare health risks of PM from biomass burning and non-biomass burning sources in northern Thailand. METHODS: We collected ambient air pollutant data (PM with a diameter of < 10 µm [PM10], PM2.5, Carbon Monoxide [CO], Ozone [O3], and Nitrogen Dioxide [NO2]) from ground-based monitors and daily outpatient hospital visits in Thailand during 2014-2017. Outpatient data included chronic lower respiratory disease (CLRD), ischaemic heart disease (IHD), and cerebrovascular disease (CBVD). We performed an ecological time series analysis to evaluate the association between daily air pollutants and outpatient visits. We used the 90th and 95th percentiles of PM10 concentrations to determine days of exposure to PM predominantly from biomass burning. RESULTS: There was significant intra annual variation in PM10 levels, with the highest concentrations occurring during March, coinciding with peak biomass burning. Incidence Rate Ratios (IRRs) between daily PM10 and outpatient visits were elevated most on the same day as exposure for CLRD = 1.020 (95% CI: 1.012 to 1.028) and CBVD = 1.020 (95% CI: 1.004 to 1.035), with no association with IHD = 0.994 (95% CI: 0.974 to 1.014). Adjusting for CO tended to increase effect estimates. We did not find evidence of an exposure response relationship with levels of PM10 on days of biomass burning. CONCLUSIONS: We found same-day exposures of PM10 to be associated with certain respiratory and cardiovascular outpatient visits. We advise implementing measures to reduce population exposures to PM wherever possible, and to improve understanding of health effects associated with burning specific types of biomass in areas where such large-scale activities occur.

Vitamin D and UV exposure in construction workers-a randomized control trial using text messaging to promote positive behaviours.

BACKGROUND: The aim of this study was to determine whether a text messaging intervention (supported by a smartphone application) would be effective in the promotion of sun-safe behaviours. Both excessive and insufficient exposure to ultra-violet (UV) radiation were considered. METHODS: A randomized control crossover trial was conducted. 112 participants from nine sites in the United Kingdom contributed to the study. There were three intervention waves, two in winter (Vitamin D-focussed) and one in summer (UV exposure-focussed). Stages of Change, Standard Erythemal (UV) Dose and assayed blood samples (Vitamin D) were employed to evaluate the effectiveness throughout the 21-day data collection periods. RESULTS: The intervention was effective in promoting positive progression in Stages of Change for Vitamin D; and this in turn was predictive of increased Vitamin D levels in participants. More limited positive findings were found with respect to UV exposure. Overall, for those in the Intervention, Vitamin D levels were significantly predicted to increase during both of the winter data collection waves. CONCLUSIONS: Interventions of this type are recommended to promote healthy Vitamin-D levels in construction workers.

Prioritising action on occupational carcinogens in Europe: a socioeconomic and health impact assessment.

BACKGROUND: Work-related cancer is an important public health issue with a large financial impact on society. The key European legislative instrument is the Carcinogens and Mutagens Directive (2004/37/EC). In preparation for updating the Directive, the European Commission commissioned a study to provide a socioeconomic, health and environmental impact assessment. METHODS: The evaluation was undertaken for 25 preselected hazardous substances or mixtures. Estimates were made of the number of cases of cancer attributable to workplace exposure, both currently and in the future, with and without any regulatory interventions, and these data were used to estimate the financial health costs and benefits. RESULTS: It was estimated that if no action is taken there will be >700 000 attributable cancer deaths over the next 60 years for the substances assessed. However, there are only seven substances where the data suggest a clear benefit in terms of avoided cancer cases from introducing a binding limit at the levels considered. Overall, the costs of the proposed interventions were very high (up to [euro ]34 000 million) and the associated monetised health benefits were mostly less than the compliance costs. CONCLUSIONS: The strongest cases for the introduction of a limit value are for: respirable crystalline silica, hexavalent chromium, and hardwood dust.

Measurement of SARS-CoV-2 in air and on surfaces in Scottish hospitals.

BACKGROUND: There are still uncertainties in our knowledge of the amount of SARS-CoV-2 virus present in the environment - where it can be found, and potential exposure determinants - limiting our ability to effectively model and compare interventions for risk management. AIM: This study measured SARS-CoV-2 in three hospitals in Scotland on surfaces and in air, alongside ventilation and patient care activities. METHODS: Air sampling at 200 L/min for 20 min and surface sampling were performed in two wards designated to treat COVID-19-positive patients and two non-COVID-19 wards across three hospitals in November and December 2020. FINDINGS: Detectable samples of SARS-CoV-2 were found in COVID-19 treatment wards but not in non-COVID-19 wards. Most samples were below assay detection limits, but maximum concentrations reached 1.7×103 genomic copies/m3 in air and 1.9×104 copies per surface swab (3.2×102 copies/cm2 for surface loading). The estimated geometric mean air concentration (geometric standard deviation) across all hospitals was 0.41 (71) genomic copies/m3 and the corresponding values for surface contamination were 2.9 (29) copies/swab. SARS-CoV-2 RNA was found in non-patient areas (patient/visitor waiting rooms and personal protective equipment changing areas) associated with COVID-19 treatment wards. CONCLUSION: Non-patient areas of the hospital may pose risks for infection transmission and further attention should be paid to these areas. Standardization of sampling methods will improve understanding of levels of environmental contamination. The pandemic has demonstrated a need to review and act upon the challenges of older hospital buildings meeting current ventilation guidance.

Occupation and cancer in Britain.

BACKGROUND: Prioritising control measures for occupationally related cancers should be evidence based. We estimated the current burden of cancer in Britain attributable to past occupational exposures for International Agency for Research on Cancer (IARC) group 1 (established) and 2A (probable) carcinogens. METHODS: We calculated attributable fractions and numbers for cancer mortality and incidence using risk estimates from the literature and national data sources to estimate proportions exposed. RESULTS: 5.3% (8019) cancer deaths were attributable to occupation in 2005 (men, 8.2% (6362); women, 2.3% (1657)). Attributable incidence estimates are 13 679 (4.0%) cancer registrations (men, 10 063 (5.7%); women, 3616 (2.2%)). Occupational attributable fractions are over 2% for mesothelioma, sinonasal, lung, nasopharynx, breast, non-melanoma skin cancer, bladder, oesophagus, soft tissue sarcoma, larynx and stomach cancers. Asbestos, shift work, mineral oils, solar radiation, silica, diesel engine exhaust, coal tars and pitches, occupation as a painter or welder, dioxins, environmental tobacco smoke, radon, tetrachloroethylene, arsenic and strong inorganic mists each contribute 100 or more registrations. Industries and occupations with high cancer registrations include construction, metal working, personal and household services, mining, land transport, printing/publishing, retail/hotels/restaurants, public administration/defence, farming and several manufacturing sectors. 56% of cancer registrations in men are attributable to work in the construction industry (mainly mesotheliomas, lung, stomach, bladder and non-melanoma skin cancers) and 54% of cancer registrations in women are attributable to shift work (breast cancer). CONCLUSION: This project is the first to quantify in detail the burden of cancer and mortality due to occupation specifically for Britain. It highlights the impact of occupational exposures, together with the occupational circumstances and industrial areas where exposures to carcinogenic agents occurred in the past, on population cancer morbidity and mortality; this can be compared with the impact of other causes of cancer. Risk reduction strategies should focus on those workplaces where such exposures are still occurring.

Development of a Task-Exposure Matrix (TEM) for Pesticide Use (TEMPEST).

INTRODUCTION: Pesticides have been associated with increased risks for a range of conditions including Parkinson's disease, but identifying the agents responsible has proven challenging. Improved pesticide exposure estimates would increase the power of epidemiological studies to detect such an association if one exists. METHODS: Categories of pesticide use were identified from the tasks reported in a previous community-based case-control study in Scotland. Typical pesticides used in each task in each decade were identified from published scientific and grey literature and from expert interviews, with the number of potential agents collapsed into 10 groups of pesticides. A pesticide usage database was then created, using the task list and the typical pesticide groups employed in those tasks across seven decades spanning the period 1945-2005. Information about the method of application and concentration of pesticides used in these tasks was then incorporated into the database. RESULTS: A list was generated of 81 tasks involving pesticide exposure in Scotland covering seven decades producing a total of 846 task per pesticide per decade combinations. A Task-Exposure Matrix for PESTicides (TEMPEST) was produced by two occupational hygienists who quantified the likely probability and intensity of inhalation and dermal exposures for each pesticide group for a given use during each decade. CONCLUSIONS: TEMPEST provides a basis for assessing exposures to specific pesticide groups in Scotland covering the period 1945-2005. The methods used to develop TEMPEST could be used in a retrospective assessment of occupational exposure to pesticides for Scottish epidemiological studies or adapted for use in other countries.

The 2008 ICOH Workshop on Skin Notation.

BACKGROUND: On 29 March 2008 the International Commission on Occupational Health (ICOH) Scientific Committee on Occupational and Environmental Dermatoses organized a Skin Notation Workshop hosted by the 11th International Percutaneous Penetration Perspectives Conference (La Grande Motte, France). Skin notation (S) was chosen as a topic for discussion because this is the only example of existing regulation in the field of dermal risk assessment. The issue was discussed in a previous workshop held in Siena, Italy in 2006 with the objective of focussing on the problems related to S, the different assignment criteria and the attempts to improve the S system made by various international and governmental agencies. A position paper was subsequently published. OBJECTIVES: The workshop in France was a continuation of this activity with the aim of evaluating how the different strategies can improve S. METHODS AND DISCUSSION: The Workshop was divided into two sessions. The first was dedicated to lectures focused on different aspects of S. In the second session participants discussed key issues with the aim of exploring the actions needed to improve international S. systems.

Comparison of information on occupation and lifestyle habits obtained from European man-made vitreous fibre production workers and their relatives.

BACKGROUND: Studies of the aetiology of fatal diseases often rely on data obtained from relatives, which can cause loss of precision and introduce bias. We assessed the quality of such information on demographics, occupation, smoking and alcohol habits. METHODS: We compared contemporary interviews, based on a structured questionnaire, with male workers from the man-made vitreous fibre production industry in four European countries and their relatives. The participation rate was 63% (74 pairs of workers and relatives). RESULTS: Only minor differences in the ability to answer the questions appeared among workers and relatives, except for specific occupational questions. There was moderate to excellent agreement for demographics, residential and work history (kappa or intraclass correlation range: 0.44-0.98). For smoking habits, beer and wine consumption the agreement was good to excellent (range: 0.59-0.99). In particular, number of different residential areas, jobs, industries, and duration of wine drinking were significantly underreported by the relatives. No general determinant for reduced agreement appeared. CONCLUSIONS: In general, the quality of information obtained from relatives appeared good. However, information on specific occupational exposures may be improved by supplementing the information from relatives with details obtained from colleagues, occupational hygiene experts or occupation-exposure matrices.

Organic solvent exposure, genes, and risk of neuropsychological impairment.

BACKGROUND: Subtle cognitive and neurological impairments have been found in some workers exposed to organic solvents. Whether these effects occur at or below current legal limits for occupational exposure is controversial. AIM: To determine whether occupational solvent exposure is associated with neuropsychological impairment and whether such risk is modified by polymorphisms in the genes for enzymes involved in detoxification. DESIGN: Retrospective case-control analysis. METHODS: We studied 78 former dockyard painters and 42 community controls. Individual respiratory and dermal exposures to solvents were estimated. Neuropsychological tests were administered, including paper and pencil tests, tests from the Neurobehavioural Evaluation System (NES2), together with a structured neurological examination and genotyping of polymorphic enzymes involved in detoxification: GSTM1, GSTT1, GSTP1, NAT1, NAT2, SOD1 and CYP1A1. RESULTS: While initial case-control analyses failed to identify any significant differences between symptomatic and asymptomatic painters, in regression analyses increasing solvent exposure was associated with increasing risk of cognitive impairment, after adjustment for IQ (or age, where appropriate), smoking and alcohol. There was also an association between exposure and reduction in grip strength. There was limited evidence of risk modification by some enzyme polymorphisms. DISCUSSION: This association between increasing intensity of solvent exposure and neuropsychological impairment may be important at current exposure levels in the UK.

Is colour vision impairment associated with cognitive impairment in solvent exposed workers?

AIMS: To determine whether acquired colour vision deficits in solvent exposed individuals are associated with cognitive impairment. METHODS: A sample of 82 painters and 38 other subjects were studied. Alcohol, drug, and smoking histories were obtained. Colour vision was tested using the Lanthony D-15-d colour vision test. Cognitive impairment was measured using the Benton visual retention test, Trail making A, and Trail making B tests. Pre-morbid IQ was estimated using the National Adult Reading Test. Solvent exposure in all subjects was estimated using a previously validated, structured subjective assessment methodology. RESULTS: After exclusion of subjects with competing causes of colour vision impairment the final group of men numbered 78. There was a significant association on multiple linear regression between the mean colour confusion index (CCI) and three measures of cognitive impairment, the Benton visual retention test, Trail making A, and Trail making B tests after adjusting for the effects of age (or IQ as appropriate), alcohol, and smoking. CONCLUSION: Acquired colour vision loss is associated with cognitive impairment in solvent exposed workers. However, given the prevalence of acquired colour vision losses in the adult population, colour vision testing is unlikely to be of value as a screening test.

A training exercise in subjectively estimating inhalation exposures.

OBJECTIVES: This study examined whether it is possible to train occupational hygienists to estimate inhalation exposures reliably from limited occupational information using a new method and assessed improvements in the quality of the estimate using the aggregate from multiple assessors. METHODS: Five occupational hygienists estimated inhalation exposure for 40 tasks covering a range of chemical hazards using a recently developed subjective modeling technique supplemented by detailed guidance notes. The measured exposure levels were used to determine the validity of the method. The correlation coefficients of the log-transformed data were used to assess the discriminative power of the method, and the ratio of the mean estimate to measured values was used to measure accuracy. RESULTS: There was good-to-excellent agreement between the assessors' estimates and the measured data, the correlation coefficients ranging from 0.73 to 0.85. There was a tendency for assessors to overestimate the exposure levels by, on the average, two- to fourfold. Aggregating the assessors' estimates helped to improve the correlation coefficient to 0.88, the overestimation being 2.6-fold. Using more than three assessors for aggregate estimates did not improve the reliability of the method. CONCLUSIONS: Overall, the assessors found the method to be useful in generating exposure estimates that correlate well with measured levels. The provision of high-quality guidance information is likely to be important in the generation of reliable exposure estimates. The method is likely to be of use in epidemiologic studies in which limited exposure data are available.

Changes in workplace concentrations of airborne respirable fibres in the European ceramic fibre industry 1987 1996.

As part of a wider epidemiological research programme, an occupational hygiene study was carried out during 1995-1996 to assess workers' current exposures to airborne materials in six European refractory ceramic fibre (RCF) plants. These plants had also participated in a cross-sectional occupational hygiene survey in 1987. The sampling strategy focussed principally on personal shift-average exposures of workers, by occupation, to respirable fibres. Monitoring was undertaken in two integrated phases: a 1-week cross-sectional survey followed by a prospective, and ongoing, programme by the RCF industry. Statistical (analysis of variance) analyses to identify patterns of variability by plant, occupational group (OG) and occupations within group were based on 464 individual shift samples, the greatest amount of data being available for production occupations. Concentrations of respirable fibres showed marked differences between plants and between OGs. Average respirable fibre concentrations among Primary and Secondary Production and Ancillary workers ranged from <0.1 f ml(-1) to up to 0.4 f ml(-1), depending on OG and plant. Individual shift-average measurements were almost invariably <1 f ml(-1). Within Secondary Conversion and Finishing, plant-specific averages ranged from 0.3 f ml(-1) to 1.25 f ml(-1). Respirable fibre concentrations were, in some plants, less than half those found in 1987. In other plants, mainly those where concentrations had been relatively low in 1987, the dust exposure had remained essentially unchanged or increased slightly. An ongoing programme of sampling is being carried out by the participating companies, generating additional information that could assist research in the long term and in improving control.

Development of a biologically relevant dermal sampler.

There are currently no appropriate methods for measuring dermal exposure to volatile agents. To address this we have produced a prototype Institute of Occupational Medicine (IOM) dermal sampler consisting of an adsorbent sandwiched between a permeable membrane and an impervious backing. The concentration of solvent on the membrane surface may be estimated from the mass collected on the adsorbent and the known permeation rate through the membrane. We have developed the prototype IOM dermal sampler for measurement of toluene exposures. Evaluation of the prototype sampler was undertaken in two stages: laboratory performance in controlled exposure situations and two short-field evaluations, which included simultaneous measurement of inhalation exposure. In all cases we compared the prototype IOM dermal sampler with activated charcoal cloth (ACC). Laboratory trials were split into spray, pour and immersion tests. The data from these suggest that the sampler responds to concentration rather than the mass on the surface of the sampler. The field study showed that the prototype sampler was suitable for measuring dermal exposure. However, the mean permeation rate of the best membrane was 78 000 mug cm(-2) h(-1), which is higher than the permeation rate through skin. This high permeation rate created difficulties throughout the study, particularly as it allowed the adsorbent to become rapidly saturated. The prototype IOM dermal sampler is the first practical dermal exposure sampler to mimic uptake through the skin. The sampler gave reproducible results in the laboratory and field trials. Future work is required to identify a less permeable membrane, which has characteristics closer to that of human skin. Additionally, a higher capacity adsorbent would be desirable. We have demonstrated a major difference when calculating the total contribution to body burden via the dermal exposure pathway using the prototype IOM dermal sampler and ACC patches, 1.5% of the total body burden compared with 95%. The prototype IOM dermal sampler provides a more biologically relevant exposure metric than the alternatives.

Lung fibre burden in lung cancer cases employed in the rock and slag wool industry.

OBJECTIVES: To evaluate the relationship between estimated exposure to man-made vitreous fibres (MMVF) and to asbestos fibres and their concentration in the lung tissue of lung cancer cases amongst MMVF production workers. METHODS: Retrospective retrieval of available lung tissue specimens was conducted following a case-control study that assessed estimated occupational exposures of MMVF workers. Fibre recovery and analysis by transmission electron microscopy (TEM) were conducted to determine fibre type, fibre dimension and numbers per gram of dry lung tissue. For cases with detailed exposure data, geometric mean (GM) concentrations were compared across the exposure categories, and regression models were used to investigate the relationship between the lung fibres and the variables of estimated exposure, with and without additional variables that may affect fibre retention. RESULTS: A total of 24 samples from 17 cases of lung cancer were available for analysis: MMVF were detected in all cases. Asbestos fibres were detected in 16. No difference or trend in GM MMVF concentration was observed across the estimated exposure categories. Odds ratio (OR) for MMVF g(-1) dry lung was 0.5 (95% confidence interval: 0.1-2.4) for the second, and 3.5 (0.6-18.9) for the third quartile of index of average exposure to MMVF in industry, compared with the first (lowest exposed) quartile (no cases in the highest quartile). CONCLUSIONS: No observable relationship existed between estimated exposure and directly-measured lung fibres among this sample of cases. Retrospective specimen collection, intra-individual variability in fibre concentration, effect of unknown factors on fibre retention and small sample size militated against this study providing evidence for or against a relationship between estimated exposure and lung fibre concentrations.

Evaluation and further development of EASE model 2.0.

EASE (Estimation and Assessment of Substance Exposure) is a general model that may be used to predict workplace exposure to a wide range of substances hazardous to health. First developed in the early 1990s, it is now in its second Windows version. This paper provides a critical assessment of the utility and performance of the EASE model, and on the basis of this review, recommendations for the structure of a revised model are outlined. Twenty-seven stakeholders were interviewed about their previous use of EASE, perceived advantages and limitations of the model and suggestions for improvement. A subset of stakeholders was contacted on a second occasion to determine their views on the preferred outputs for an ideal exposure assessment model. Overall, stakeholders felt that the model should be updated to provide more accurate and precise exposure assessments. However, users also expressed the view that the simplicity and usability of the software model should not be compromised. Six studies investigating the validity of the inhalation exposure assessment section of EASE were identified. These showed that the model generally either predicted close to the measured exposures or overestimated exposure; though performance was highly variable. Two studies investigated the validity of the dermal exposure assessment and found that EASE produced considerable overestimates of actual dermal exposure (the amount of a substance that actually lands on the skin). A conceptual model of exposure was developed to investigate whether the structure of the EASE model is appropriate. Although EASE has a number of characteristics that describe exposure, it is a greatly simplified model and does not include all the important exposure determinants. More importantly, EASE can produce estimates of exposure that are ambiguous or incomplete. Our conceptual model may provide a rational basis for developing an improved version of EASE but further consultation is needed to decide the purpose and intended use of any successor to EASE.

The effect of room size and general ventilation on the relationship between near and far-field concentrations.

Measurements of personal exposure level are generally greater than or equal to concentrations found at some fixed location in the body of the workroom. This article presents a theoretical analysis of such differences using a simple model of exposure, implemented as a two-compartment mass balance model with a constant emission rate. Simulated exposure levels (termed the near-field) and the concentration at a fixed location (the far-field) were obtained for five room sizes (30 to 3000 m3), each with five general ventilation rates (0.3 to 30 air-changes per hour) and three levels of air movement in the vicinity of the worker (generally 3 to 30 m3/min). The ratio of near- to far-field concentrations from the simulations ranged from unity in small poorly ventilated rooms to 24 in large well ventilated areas, which compares favorably with actual measurement data. The predicted concentrations obtained in small rooms (< 100 m3) with less than one air-change per hour were almost 40 times higher than in larger rooms. The results from these simulations have been used to modify the original exposure model to better reflect the likely effect of general ventilation on workers' exposure.