Reliability and reproducibility of CBCT assessment of mandibular changes before and after treatment for Class III growing patients - an easy and quick way for evaluation.

The objective of this study was to evaluate intraobserver reliability and inter-observer reproducibility of a 3-dimensional (3D) assessment method for mandibular changes of growing patients after orthodontic treatment for Class III malocclusion.Methods Cone-beam computed tomography (CBCT) scans were performed before and after orthodontic treatment for 27 patients. During the scan, the patient was positioned such that his/her mandibular plane was parallel to floor. Three observers independently worked on the DICOM data, reconstructed the pre- and post-treatment 3D models in software, selected the stable anatomical structures (basal bone area from the lingual surface of the symphysis to the distal aspect of the first molars) to guide the automated superimposition process. Then, each observer registered 14 anatomical landmarks on the virtual models, for three times after suitable interval, to generate 3 sets of coordinates; the mean was taken as the coordinates for that particular landmark. The intraobserver reliability and inter-observer reproducibility of the method were analyzed.Results The ICCs was > 0.90 for 25 (92.6%) of the intraobserver assessments. The precision of the measurement method was < 0.3 mm in 24 (88.9%) cases. The interobserver reproducibility errors were < 0.3 mm in 21 of the 27 cases.Conclusions The intraobserver reliability and inter-observer reproducibility of 3D assessment of mandibular changes using the virtual models were excellent.

Intracellular bacterial eradication using a novel peptide in vitro.

AIM: To determine the effect of a novel antimicrobial peptide (AMP; OP145) and cell-penetrating peptide (Octa-arginine/R8) conjugate on the killing of intracellular Enterococcus faecalis, compared to OP145 and an antibiotic combination recommended for regenerative endodontic procedures. METHODOLOGY: The biocompatible concentrations of OP145 and OP145-R8 were determined by assessing their cytotoxicity against human macrophages and red blood cells. Spatiotemporal internalization of the peptides into macrophages was investigated qualitatively and quantitatively by confocal laser scanning microscopy and flow cytometry respectively. Killing of extracellular and intracellular E. faecalis OG1RF by the peptides was determined by counting the colony-forming units (CFU). Intracellular antibacterial activity of the peptides was compared to a double antibiotic combination. Confocal microscopy was used to confirm the intracellular bacterial eradication. Significant differences between the different test groups were analysed using one-way analysis of variance. p < .05 was considered to be statistically significant. RESULTS: Peptides at a concentration of 7.5 µmol/L were chosen for subsequent experiments based on the results of the alamarBlue™ cell viability assay and haemolytic assay. OP145-R8 selectively internalized into lysosomal compartments and the cytosol of macrophages. Conjugation with R8 improved the internalization of OP145 into macrophages in a temporal manner (70.53% at 1 h to 77.13% at 2 h), while no temporal increase was observed for OP145 alone (60.53% at 1 h with no increase at 2 h). OP145-R8 demonstrated significantly greater extracellular and intracellular antibacterial activity compared to OP145 at all investigated time-points and concentrations (p < .05). OP145-R8 at 7.5 µmol/L eradicated intracellular E. faecalis after 2 h (3.5 log reduction compared to the control; p < .05), while the antibiotics could not reduce more than 0.5 log CFU compared to the control (p > .05). Confocal microscopy showed complete absence of E. faecalis within the OP145-R8 treated macrophages. CONCLUSIONS: The results of this study demonstrated that the conjugation of an AMP OP145 to a cell-penetrating peptide R8 eradicated extracellular and intracellular E. faecalis OG1RF without toxic effects on the host cells.

Biofilms in Endodontics-Current Status and Future Directions.

Microbiota are found in highly organized and complex entities, known as biofilms, the characteristics of which are fundamentally different from microbes in planktonic suspensions. Root canal infections are biofilm mediated. The complexity and variability of the root canal system, together with the multi-species nature of biofilms, make disinfection of this system extremely challenging. Microbial persistence appears to be the most important factor for failure of root canal treatment and this could further have an impact on pain and quality of life. Biofilm removal is accomplished by a chemo-mechanical process, using specific instruments and disinfecting chemicals in the form of irrigants and/or intracanal medicaments. Endodontic research has focused on the characterization of root canal biofilms and the clinical methods to disrupt the biofilms in addition to achieving microbial killing. In this narrative review, we discuss the role of microbial biofilms in endodontics and review the literature on the role of root canal disinfectants and disinfectant-activating methods on biofilm removal.

The remaining dentin thickness investigation of the attempt to remove broken instrument from mesiobuccal canals of maxillary first molars with virtual simulation technique.

BACKGROUND: To investigate differences in the estimated minimum remaining dentin thickness (RDT) between periapical radiographs using the paralleling and parallax technique, after simulated removal of broken instrument from the mesiobuccal (MB) canal of maxillary first molar in virtual simulation model. The 3D measurement was taken as the standard for comparison. METHODS: Thirty-six maxillary first molars were scanned by micro-CT and reconstructed as 3-dimensional (3D) model. A virtual fragment of an instrument was created within the MB canal in software. Removal of the broken instrument was simulated in both the 3D and 2D dataset. Then, the models of all specimens were submitted to 2D and 3D measurements for the lowest (RDT) value in each. Differences in the values between the paralleling and parallax radiographic technique and the 3D-RDT value were analyzed with two-way Analysis of Variance. The Intra-class Correlation Coefficient (ICC) was used to assess consistency of the RDT measurements between the two periapical radiographic and techniques and 3D analysis. RESULTS: There was significant difference between RDT value obtained from the paralleling technique and 3D-RDT. There were no differences between RDT obtained from parallax (angled) technique and 3D-RDT. The ICC of RDT values between paralleling technique and 3D measurement were lower than 0.75. ICC between angled radiographs and 3D technique was close to 0.75. The optimal horizontal angle for the parallax technique was about 21°. CONCLUSIONS: The virtual simulation technique can provide valuable insight into the benefit/risk analysis before removal of a broken instrument. Parallel radiographs overestimate the actual remain dentin thickness in mesiobuccal canals of maxillary first molars, whereas the parallel technique would give a closer estimate to the actual thickness at a projection angle of about 21°.

Penetration of Calcium Silicate and Epoxy Resin Sealers Into the Lateral Canals.

OBJECTIVES: The aim of this research was to compare the penetration ability of calcium silicate-based sealers (iRoot SP and TotalFill BC HiFlow) and an epoxy resin-based sealer (AH Plus) into the lateral canals using the single-cone (SC) or continuous wave compaction (CW) obturation techniques. METHODS: Ninety single-rooted human teeth received canal instrumentation and diaphanisation before artificial lateral canals were created at 3 different root levels. The specimens were randomly allocated into 6 groups based on the combination of obturation technique and sealer used. Radiographic and photographic measurements evaluated the percentage of sealer penetration. Statistical analysis was performed to compare the penetration ability amongst different types of sealers, obturation methods, and root levels. RESULTS: Although TotalFill BC HiFlow sealer combined with the CW technique demonstrated greater sealer penetration at the coronal level (P < .05), the overall penetration ability of iRoot SP, TotalFill BC HiFlow, and AH Plus was not significantly different. The deepest sealer penetration was observed at the apical root level. CONCLUSIONS: All sealers showed similar penetration abilities into the lateral canals using the SC or CW techniques in vitro. Calcium silicate-based sealers have comparable penetration ability into lateral canals compared to epoxy resin-based sealers using SC or CW obturation techniques.

Long-term follow-up of single-visit pulp revascularisation for the dens evaginatus and dens invaginatus: Cases report.

This article documents cases of single-visit pulp revascularisation for dens evaginatus and dens invaginatus, without using intracranial medicaments or antibiotics, aiming to provide a potentially applicable protocol for pulp revascularisation procedure in a single-visit. Two patients with chief complaints of pain and swelling visited a dental hospital. Radiographs revealed that the causative teeth had an open apex and periapical radiolucency, and the teeth were diagnosed as pulp necrosis and acute apical abscess or symptomatic apical periodontitis. For both cases, single-visit revascularisation was completed without intracanal medicaments or antibiotics. The patients were periodically recalled to evaluate periapical healing after treatment. The apical lesion healed, and the root dentin thickening was observed. The single-visit pulp revascularisation procedure without using specific intracanal medicaments can produce clinically favourable results for these dental anomalies.

PROMs Following Root Canal Treatment and Surgical Endodontic Treatment.

The FDI is currently working on developing a tool to encompass patient-reported outcome measures (PROMs) within the overall assessment of outcomes of endodontic treatment. The outcome of endodontic treatment has traditionally been determined by various clinical and radiographic criteria. However, these parameters do not address the impact of treatment on a patient's oral health-related quality of life (OHRQoL). OHRQoL, a crucial PROM, can be used to understand treatment outcome from a patient-centred perspective, thus improving clinician-patient communication whilst guiding decision-making. This focussed review aims to recount the OHRQoL of patients following nonsurgical root canal treatment and surgical endodontic treatment, with a specific focus on the minimal important difference (MID; the minimum score changes of an outcome instrument for a patient to register a clinically significant change in their OHRQoL and/or oral condition) and the methods used to determine it. The current evidence indicates that the OHRQoL of patients requiring root canal treatment is poorer than those without such need. Accordingly, the literature suggests that OHRQoL improves following nonsurgical or surgical endodontic treatment. However, study methodologies vary widely, and conclusions cannot be drawn with high confidence, nor can MID recommendations be provided. Well-designed clinical studies with baseline measurements and appropriate follow-up time frames are therefore needed. Despite that the literature is rife with outcome studies, research on PROMs is an area that deserves greater attention, particularly in relation to the MID. Determining the MID will facilitate the understanding of changes in outcome scores from the patients' perspective, thus allowing for more informed decision-making in clinical practice.

Effect of MMP Inhibitors on the Bond Strength of Fibre Posts After Ageing.

AIM: This in vitro study aimed to evaluate the effect of matrix metalloproteinase (MMP) inhibitors on the bond strength of resin-cemented fibre posts to radicular dentin under an aged-loaded condition. MATERIALS AND METHODS: Radicular dentin was prepared and irrigated by MMP inhibitor solution after root canal obturation in 60 extracted single-rooted teeth based on 6 groups: (1) 2% chlorhexidine (CHX) + loaded; (2) CHX + unloaded; (3) 0.5% benzalkonium chloride (BAC) + loaded; (4) BAC + unloaded; (5) 17% ethylenediaminetetraacetic acid (EDTA) + loaded; and (6) EDTA + unloaded. After final rinsing, all specimens were sliced cross-sectionally and kept in a water bath for 12 months of ageing. Groups 1, 3, and 5 were subjected to cyclic loading. Push-out tests were conducted using a universal testing machine, and failure mode was examined. The data were analysed using 3-way analysis of variance and post hoc tests at α = 0.05. RESULTS: BAC + unloaded demonstrated the highest mean bond strength (3.12 ± 0.18 MPa; P < .001), while the BAC + loaded and CHX + loaded groups showed a significantly lower push-out bond strength than their unloaded counterparts. Mixed adhesive-cohesive failure was the most common failure mode observed. CONCLUSIONS: Without cycling loading, BAC was superior to CHX and EDTA in preserving the bond strength of resin-cemented fibre posts after 12 months of ageing. Loading significantly weakened the effectiveness of BAC and CHX in preserving the bond strength.

Tissue Stabilization, Bacterial Adhesion, and Stem Cell Viability in Trans-cinnamaldehyde-conditioned Dentin.

INTRODUCTION: This laboratory study aimed to evaluate the effect of trans-cinnamaldehyde (TC) conditioning on dentin tissue stabilization, bacterial adhesion, and stem cell toxicity. METHODS: Dentin beams (n = 204) from extracted human molars were demineralized in phosphoric acid and treated with TC (2.5, 5, and 7.5%), 50% ethanol-water mixture (vehicle control) or 2.5% glutaraldehyde (GA) (positive control) for 30 minutes. Demineralized but untreated specimens served as the negative control. After treatment, collagen crosslinking was characterized by measuring the elastic modulus (Er) and hardness (n = 5). Biodegradation resistance was examined by determining the loss of dry mass (n = 8), hydroxyproline release (n = 4) and scanning electron microscopy (n = 2), after exposure to bacterial collagenase. Inhibition of bacterial adhesion was investigated by colony counting assay (n = 12) and scanning electron microscopy (n = 2). Viability of stem cells of the apical papilla on TC-conditioned dentin was determined using the Cell Counting Kit-8 assay (n = 8). Data were statistically analyzed using one-way analysis of variance (ANOVA) test followed by Dunnett's multiple comparisons at a significance level of 5%. RESULTS: TC-conditioned dentin showed a concentration-dependent increase in Er and hardness. The Er and hardness of 5% and 7.5% TC-conditioned dentin were significantly greater than that of the negative control and vehicle control groups (P < .05). There was no significant difference in the biodegradation resistance between GA and 5% TC-conditioned dentin (P > .05). TC-conditioned dentin showed a well-preserved collagen fibril network with clear cross-banding, comparable to GA-conditioned dentin. All concentrations of TC inhibited bacterial adhesion on dentin, significantly greater than the negative control (P < .05). There was no reduction in viability of stem cells of the apical papilla viability on TC-conditioned dentin compared to the negative control (P > .05). CONCLUSIONS: TC conditioning stabilized the dentin and protected it from enzymatic degradation. TC prevented bacterial adhesion on the dentin but maintained stem cell viability.

Enterococcus faecalis Shields Porphyromonas gingivalis in Dual-Species Biofilm in Oxic Condition.

Aim: To develop a reproducible biofilm model consisting of Enterococcus faecalis (E. faecalis) and Porphyromonas gingivalis (P. gingivalis) and to evaluate the interaction between the two bacterial species. Methodology: E. faecalis and P. gingivalis were grown in mono-culture, sequential, and co-culture models for 96 h in a 96-well polystyrene microtiter plate under both aerobic and anaerobic conditions separately. The viability of the two bacterial species in the biofilms was quantified by polymerase chain reaction (qPCR). Biofilm thickness and protein contents were measured using confocal laser scanning microscopy (CLSM). Two-way analysis of variance (ANOVA) was performed to analyze cell viability and biofilm thickness among different culture models cultivated under either aerobic or anaerobic conditions. The level of significance was set at p < 0.05. Results: Different culture models tested did not show any significant difference between the viable cell counts of both E. faecalis and P. gingivalis cultivated under aerobic and anaerobic conditions (p > 0.05). Biofilm was significantly thicker (p < 0.05) in the co-culture models compared to the mono-culture and sequential models. Protein contents in the biofilms were more pronounced when both bacterial species were co-cultured under aerobic conditions. Conclusions: E. faecalis appeared to shield P. gingivalis and support its continued growth in oxic (aerobic) conditions. The co-culture model of E. faecalis and P. gingivalis produced a significantly thicker biofilm irrespective of the presence or absence of oxygen, while increased protein contents were only observed in the presence of oxygen.