Quantifying the narrative flow of imagined versus autobiographical stories.

Lifelong experiences and learned knowledge lead to shared expectations about how common situations tend to unfold. Such knowledge of narrative event flow enables people to weave together a story. However, comparable computational tools to evaluate the flow of events in narratives are limited. We quantify the differences between autobiographical and imagined stories by introducing sequentiality, a measure of narrative flow of events, drawing probabilistic inferences from a cutting-edge large language model (GPT-3). Sequentiality captures the flow of a narrative by comparing the probability of a sentence with and without its preceding story context. We applied our measure to study thousands of diary-like stories, collected from crowdworkers, about either a recent remembered experience or an imagined story on the same topic. The results show that imagined stories have higher sequentiality than autobiographical stories and that the sequentiality of autobiographical stories increases when the memories are retold several months later. In pursuit of deeper understandings of how sequentiality measures the flow of narratives, we explore proportions of major and minor events in story sentences, as annotated by crowdworkers. We find that lower sequentiality is associated with higher proportions of major events. The methods and results highlight opportunities to use cutting-edge computational analyses, such as sequentiality, on large corpora of matched imagined and autobiographical stories to investigate the influences of memory and reasoning on language generation processes.

High production of ectoine from methane in genetically engineered Methylomicrobium alcaliphilum 20Z by preventing ectoine degradation.

BACKGROUND: Methane is a greenhouse gas with a significant potential to contribute to global warming. The biological conversion of methane to ectoine using methanotrophs represents an environmentally and economically beneficial technology, combining the reduction of methane that would otherwise be combusted and released into the atmosphere with the production of value-added products. RESULTS: In this study, high ectoine production was achieved using genetically engineered Methylomicrobium alcaliphilum 20Z, a methanotrophic ectoine-producing bacterium, by knocking out doeA, which encodes a putative ectoine hydrolase, resulting in complete inhibition of ectoine degradation. Ectoine was confirmed to be degraded by doeA to N-α-acetyl-L-2,4-diaminobutyrate under nitrogen depletion conditions. Optimal copper and nitrogen concentrations enhanced biomass and ectoine production, respectively. Under optimal fed-batch fermentation conditions, ectoine production proportionate with biomass production was achieved, resulting in 1.0 g/L of ectoine with 16 g/L of biomass. Upon applying a hyperosmotic shock after high-cell-density culture, 1.5 g/L of ectoine was obtained without further cell growth from methane. CONCLUSIONS: This study suggests the optimization of a method for the high production of ectoine from methane by preventing ectoine degradation. To our knowledge, the final titer of ectoine obtained by M. alcaliphilum 20ZDP3 was the highest in the ectoine production from methane to date. This is the first study to propose ectoine production from methane applying high cell density culture by preventing ectoine degradation.

Correction: Digital Device Exposure and Cognition Levels of Children in Low- and Middle-Income Countries: Cross-sectional Study in Cambodia.

[This corrects the article DOI: .].

Digital Device Exposure and Cognition Levels of Children in Low- and Middle-Income Countries: Cross-sectional Study in Cambodia.

BACKGROUND: Policy makers and practitioners in low- and middle-income countries (LMICs) are increasingly focusing on the effectiveness of digital devices in the delivery of medical and educational services to children under resource constraints. It is widely known that digital literacy can be fostered through exposure to and education regarding digital devices, which can improve children's academic performance as well as their search and communication skills in the digital era. However, the correlation between the cognitive function of children and exposure and intensity of the exposure to digital devices has rarely been studied, and the association between digital device exposure and the socioeconomic characteristics and cognitive development of children in LMICs is unknown. OBJECTIVE: This study examines the association among exposure to digital devices, socioeconomic status, and cognitive function in children aged 3 to 9 years in Cambodia. METHODS: We used a survey of 232 children that gathered data on familiarity with digital devices, demographic characteristics, and socioeconomic status, as well as a Cambridge Neuropsychological Test Automated Battery test for cognitive function, to examine the association between possible barriers and factors that may influence the cognitive function of children in 2 Cambodian schools from April 22, 2019, to May 4, 2019. A comparative analysis was performed with and without digital exposure, and an association analysis was performed among the variables from the survey and cognitive function. RESULTS: Significant differences were observed in demographic and socioeconomic characteristics such as school location, family type, and family income according to digital device exposure. The results of the Cambridge Neuropsychological Test Automated Battery tests, except for 1 test related to executive function, indicated no significant differences (P>.05) between group A and group B or among the 4 subgroups. Pretest digital device experience and amount of time spent using digital devices during the test had no significant impacts on the cognitive development of the children. Conversely, the multivariate analyses showed that cognitive function was associated with educational expenses per child, school (location), family type, and family income. CONCLUSIONS: These results provide evidence to policy makers and practitioners on the importance of improving socioeconomic conditions, leading to investment in education by implementing programs for children's cognitive development through digital devices in LMICs.

Improving Printability of Digital-Light-Processing 3D Bioprinting via Photoabsorber Pigment Adjustment.

Digital-light-processing (DLP) three-dimensional (3D) bioprinting, which has a rapid printing speed and high precision, requires optimized biomaterial ink to ensure photocrosslinking for successful printing. However, optimization studies on DLP bioprinting have yet to sufficiently explore the measurement of light exposure energy and biomaterial ink absorbance controls to improve the printability. In this study, we synchronized the light wavelength of the projection base printer with the absorption wavelength of the biomaterial ink. In this paper, we provide a stepwise explanation of the challenges associated with unsynchronized absorption wavelengths and provide appropriate examples. In addition to biomaterial ink wavelength synchronization, we introduce photorheological measurements, which can provide optimized light exposure conditions. The photorheological measurements provide precise numerical data on light exposure time and, therefore, are an effective alternative to the expendable and inaccurate conventional measurement methods for light exposure energy. Using both photorheological measurements and bioink wavelength synchronization, we identified essential printability optimization conditions for DLP bioprinting that can be applied to various fields of biological sciences.

Temporally Resolved Electrochemical Interrogation for Stochastic Collision Dynamics of Electrogenerated Single Polybromide Droplets.

In this article, we present electrochemical interrogation for collision dynamics of electrogenerated individual polybromide ionic liquid (PBIL) droplets through chronoamperometry combined with fast scan cyclic voltammetry (CA-FSCV). In the CA mode of CA-FSCV, a Pt ultramicroelectrode (UME) acts as the electrochemical generator for PBIL droplets by holding the oxidation potential for Br- in a given time, while FSCV is repetitively performed at a certain frequency. In the FSCV mode of CA-FSCV, a Pt UME serves as the probe to electrochemically monitor Br3- reduction for an adsorbed PBIL droplet during collision with a high temporal resolution. Based on the newly introduced CA-FSCV, we can estimate the dynamic changes in the following parameters for a short collision time: the contact radius of a PBIL droplet on a Pt UME, the concentration of Br- in the droplet, and the apparent charge transfer rate constant for electro-reduction of Br3- to Br- in the droplet, koapp. Moreover, a computational calculation using molecular dynamics is presented that can explain the change in koapp as a function of time for Br- electrolysis in a PBIL droplet. Based on the quantitative estimation of the above parameters, we suggest a more advanced mechanism for the stochastic electrochemical collision process of a PBIL droplet. These findings are important for understanding QBr2n+1/QBr half redox reactions in aqueous energy storage systems, such as Zn-Br redox flow batteries and Br-related redox enhanced electrochemical capacitors.

Time Transient Electrochemical Monitoring of Tetraalkylammonium Polybromide Solid Particle Formation: Observation of Ionic Liquid-to-Solid Transitions.

Energy storage systems (ESSs) using a Br-/Br2 redox reaction such as a Zn/Br redox flow battery (RFB) or a redox-enhanced electrochemical capacitor (Redox-EC) suffer from self-discharge reactions resulting in significant Coulombic loss. To inhibit the self-discharge, quaternary ammonium (Q+) and tetraalkylammonium (T+) bromide are added to form ionic liquid (QBr2 n+1) and solid (TBr3) polybromides during the ESS charging process. The electrochemical formation of liquid QBr2 n+1 and its electrochemical properties have been examined. The detailed mechanisms of ionic solid TBr3 formation, however, have not yet been explored. In this article, we analyzed the ionic liquid-to-solid phase transition of TBr3 particles using a time transient electrochemical method. We suggest the formation of ionic solid TBr3 particles via hydrated TBr3 droplets as an intermediate phase, which are generated by electro-oxidation of Br- in an aqueous TBr solution. We found the phase transition time of TBr3 particles is strongly dependent on the chemical structure of T+ and the concentration of TBr in an aqueous solution.

Porosity Properties of the Conformers of Sodalite-like Zeolitic Imidazolate Frameworks.

The conformational isomers of zeolitic imidazolate frameworks (ZIFs) can have their own unique porosity and structural stability. We report that a new sodalite-like ZIF (termed ß-ZIF-65(Zn)) is polymorphous with as the existing ZIF-65(Zn) (Zn(nIm)2, nIm = 2-nitroimidazolate) but has a different linker conformation in the six-membered rings of sodalite cages. This conformational isomerism leads to distinctive permanent porosity for each conformer, which has been verified by gas adsorption measurements. In addition, variable-temperature X-ray diffraction analyses indicate that ß-ZIF-65(Zn) is more resistant to displacive phase transitions than ZIF-65(Zn). The activated ß-ZIF-65(Zn) conformer adsorbs 2.8 times more benzene than the activated ZIF-65(Zn) at P/ P0 = 0.3 and 298 K. This work suggests that other types of ZIF conformers can be discovered.

Activation of Periodate by Freezing for the Degradation of Aqueous Organic Pollutants.

A new strategy (i.e., freezing) for the activation of IO4- for the degradation of aqueous organic pollutants was developed and investigated. Although the degradation of furfuryl alcohol (FFA) by IO4- was negligible in water at 25 °C, it proceeded rapidly during freezing at -20 °C. The rapid degradation of FFA during freezing should be ascribed to the freeze concentration effect that provides a favorable site (i.e., liquid brine) for the proton-coupled degradation process by concentrating IO4-, FFA, and protons. The maximum absorption wavelength of cresol red (CR) was changed from 434 nm (monoprotonated CR) to 518 nm (diprotonated CR) after freezing, which confirms that the pH of the aqueous IO4- solution decreases by freezing. The degradation experiments with varying experimental parameters demonstrate that the degradation rate increases with increasing IO4- concentration and decreasing pH and freezing temperature. The application of the IO4-/freezing system is not restricted to FFA. The degradation of four other organic pollutants (i.e., tryptophan, phenol, 4-chlorophenol, and bisphenol A) by IO4-, which was negligible in water, proceeded during freezing. In addition, freezing significantly enhanced the IO4--mediated degradation of cimetidine. The outdoor experiments performed on a cold winter night show that the IO4-/freezing system for water treatment can be operated without external electrical energy.

Effect of interferential current therapy on forward head posture.

[Purpose] The purpose of this study was to examine the effects of interferential current therapy on the shoulder muscles of subjects with forward head posture. [Subjects and Methods] Thirty volunteers (15 forward head posture, 15 control) participated in this study. Interferential current therapy treatment was conducted for 10 min, three times per week, for 3 weeks on both the upper trapezius and levator scapulae. Subjects were measured anterior both acromion distance and posterior both acromial distance using a ruler, and the forward head posture angle using an electronic application. [Results] Both groups showed significant increases in anterior acromial distance, and decreases in posterior acromial distance and forward head posture angle. [Conclusion] Subjects were concluded that electrical therapy could improve structural alignment; therefore, the implementation of interferential current therapy is expected to be effective for the treatment of forward head posture.

Analysis of the proficiency of single radial immunodiffusion assays for quality control of influenza vaccines in Korea.

Influenza vaccine potency, which is determined by quantitatively measuring the content of Hemagglutinin (HA), is an essential index representing the efficacy of the vaccine. Standardization of the single radial immunodiffusion (SRID) assay, a method for measuring HA content, and proficiency of the testing institutions are crucial for influenza vaccine quality control. Herein, we assessed the proficiency of SRID assays at the National Control Laboratory (NCL) of Korea and several vaccine manufacturers. Eight laboratories participated in this study, and the proficiencies of all laboratories yielded satisfactory results in overall SRID assays. In contrast, there were some unsatisfactory results in measuring with different types of agarose gel plates produced by other laboratories. Overall, our findings demonstrated that the proficiency of SRID assay in the tested laboratories is acceptable for quality control of influenza vaccines and that detailed review on the validation reports regarding the test methods will be helpful for better control.

Application of recombinant hemagglutinin proteins as alternative antigen standards for pandemic influenza vaccines.

OBJECTIVES: The single radial immunodiffusion (SRID) assay, used to quantify hemagglutinin (HA) in influenza vaccines, requires reference reagents; however, because centralized production of reference reagents may slow the emergency deployment of vaccines, alternatives are needed. RESULTS: We investigated the production of HA proteins using recombinant DNA technology, rather than a traditional egg-based production process. The HA proteins were then used in an SRID assay as a reference antigen. We found that HA can be quantified in both egg-based and cell-based influenza vaccines when recombinant HAs (rHAs) are used as the reference antigen. Furthermore, we confirmed that rHAs obtained from strains with pandemic potential, such as H5N1, H7N3, H7N9, and H9N2 strains, can be utilized in the SRID assay. The rHA production process takes just one month, in contrast to the traditional process that takes three to four months. CONCLUSIONS: The use of rHAs may reduce the time required to produce reference reagents and facilitate timely introduction of vaccines during emergencies.

Funisitis is more common in cervical insufficiency than in preterm labor and preterm premature rupture of membranes.

OBJECTIVE: To compare the frequency of histologic chorioamnionitis and funisitis among women experiencing preterm labor, preterm premature rupture of membranes (PROM) and cervical insufficiency. METHODS: This retrospective cohort study included singleton pregnant women who delivered at ≤36 weeks of gestation. The patients with preterm birth were subdivided into preterm labor (n=117), preterm PROM (n=153), and cervical insufficiency (n=20). All placentas were examined for pathology, according to the criteria of Salafia with minor modification. Frequencies of histologic chorioamnionitis and funisitis were evaluated according to the causes of preterm birth. RESULTS: 1) Histologic chorioamnionitis was diagnosed in 48.7% (57/117) of cases with preterm labor, 47.4% (73/153) with preterm PROM, and 75.0% (15/20) with cervical insufficiency. Funisitis was detected in 11.1% (13/117) of cases with preterm labor, 15.7% (24/153) with preterm PROM, and 40.0% (8/20) with cervical insufficiency. 2) Frequency of histologic chorioamnionitis was higher in cases with cervical insufficiency compared to preterm PROM. Frequency of funisitis was higher in cases with cervical insufficiency compared to both preterm labor and preterm PROM (P<0.05). The difference in frequency of funisitis remained significant after adjustment for gestational age at delivery and cervical dilatation at diagnosis. 3) Frequency of grade 2 funisitis was higher in cases with cervical insufficiency (35.0%, 7/20) compared to both preterm labor (6.8%, 8/117) and preterm PROM (9.8%, 15/153) (P=0.001). And the difference remained significant after adjustment for gestational age at delivery and cervical dilatation at diagnosis. CONCLUSION: The highest frequency of funisitis was observed in cervical insufficiency among cases with spontaneous preterm birth.

Evaluation of Fluid Behaviors in a Pushbutton-Activated Microfluidic Device for User-Independent Flow Control.

Although numerous studies have been conducted to realize ideal point-of-care testing (POCT), the development of a user-friendly and user-independent power-free microfluidic platform is still a challenge. Among various methods, the finger-actuation method shows a promising technique that provides a user-friendly and equipment-free way of delivering fluid in a designated manner. However, the design criteria and elaborate evaluation of the fluid behavior of a pushbutton-activated microfluidic device (PAMD) remain a critical bottleneck to be widely adopted in various applications. In this study, we have evaluated the fluid behavior of the PAMD based on various parameters, such as pressing velocity and depth assisted by a press machine. We have further developed a user-friendly and portable pressing block that reduces user variation in fluid behavior based on the evaluation.

Reconfigurable Hanging Drop Microarray Platform for On-Demand Preparation and Analysis of Spheroid Array.

In response to the increasing demand for spheroid-based cancer research, the importance of developing integrated platforms that can simultaneously facilitate high-throughput spheroid production and multiplexed analysis is emphasized. In addition, the understanding of how the size and cellular composition of tumors directly influence their internal structures and functionalities underlines the critical need to produce spheroids of diverse sizes and compositions on a large scale. To address this rising demand, this work presents a configurable and linkable in vitro three-dimensional (3D) cell culture kit (CLiCK) for spheroids, termed CLiCK-Spheroid. This platform consists of three primary components: a hanging drop microarray (HDMA), a concave pillar microarray (CPMA), and gradient blocks. The HDMA alone produces a homogeneous spheroid array, while its combination with the gradient block enables one-step generation of a size-gradient spheroid array. Using the size-gradient spheroid arrays, the occurrence of necrotic cores based on spheroid size is demonstrated. Additionally, spheroids in a single batch can be conveniently compartmentalized and regrouped using a CPMA, enhancing the versatility of spheroid arrays and enabling multiplexed drug treatments. By combining the different assembly methods, this work has achieved high-throughput production of cell composition-gradient spheroid arrays, with noticeable variations in morphology and vascularization based on cell compositions.

Understanding the Diversity and Roles of the Ruminal Microbiome.

The importance of ruminal microbiota in ruminants is emphasized, not only as a special symbiotic relationship with ruminants but also as an interactive and dynamic ecosystem established by the metabolites of various rumen microorganisms. Rumen microbial community is essential for life maintenance and production as they help decompose and utilize fiber that is difficult to digest, supplying about 70% of the energy needed by the host and 60-85% of the amino acids that reach the small intestine. Bacteria are the most abundant in the rumen, but protozoa, which are relatively large, account for 40-50% of the total microorganisms. However, the composition of these ruminal microbiota is not conserved or constant throughout life and is greatly influenced by the host. It is known that the initial colonization of calves immediately after birth is mainly influenced by the mother, and later changes depending on various factors such as diet, age, gender and breed. The initial rumen microbial community contains aerobic and facultative anaerobic bacteria due to the presence of oxygen, but as age increases, a hypoxic environment is created inside the rumen, and anaerobic bacteria become dominant in the rumen microbial community. As calves grow, taxonomic diversity increases, especially as they begin to consume solid food. Understanding the factors affecting the rumen microbial community and their effects and changes can lead to the early development and stabilization of the microbial community through the control of rumen microorganisms, and is expected to ultimately help improve host productivity and efficiency.

Antibiotic resistance in livestock, environment and humans: One Health perspective.

Antibiotic resistance (AR) is a complex, multifaceted global health issue that poses a serious threat to livestock, humans, and the surrounding environment. It entails several elements and numerous potential transmission routes and vehicles that contribute to its development and spread, making it a challenging issue to address. AR is regarded as an One Health issue, as it has been found that livestock, human, and environmental components, all three domains are interconnected, opening up channels for transmission of antibiotic resistant bacteria (ARB). AR has turned out to be a critical problem mainly because of the overuse and misuse of antibiotics, with the anticipation of 10 million annual AR-associated deaths by 2050. The fact that infectious diseases induced by ARB are no longer treatable with antibiotics foreshadows an uncertain future in the context of health care. Hence, the One Health approach should be emphasized to reduce the impact of AR on livestock, humans, and the environment, ensuring the longevity of the efficacy of both current and prospective antibiotics.

Complete genome sequence of Enterococcus faecium strain AK_C_05 with potential characteristics applicable in livestock industry.

The Enterococcus faecium (E. faecium) strain AK_C_05 was isolated from cheonggukjang, the Korean traditional food, collected from a local market in South Korea. In this report, we presented the complete genome sequence of E. faecium strain AK_C_05. The genome of E. faecium strain AK_C_05 genome consisted of one circular chromosome (2,691,319 bp) with a guanine + cytosine (GC) content of 38.3% and one circular plasmid (177,732 bp) with a GC content of 35.48%. The Annotation results revealed 2,827 protein-coding sequences (CDSs), 18 rRNAs, and 68 tRNA genes. It possesses genes, which encodes enzymes such as alpha-galactosidase (EC 3.2.1.22), beta-glucosidase (EC 3.2.1.21) and alpha-L-arabinofuranosidase (EC 3.2.1.55) enabling efficient utilization of carbohydrates. Based on Clusters of Orthologous Groups analysis, E. faecium strain AK_C_05 showed specialization in carbohydrate transport and metabolism indicating the ability to generate energy using a variety of carbohydrates.

Swine gut microbiome associated with non-digestible carbohydrate utilization.

Non-digestible carbohydrates are an unavoidable component in a pig's diet, as all plant-based feeds contain different kinds of non-digestible carbohydrates. The major types of non-digestible carbohydrates include non-starch polysaccharides (such as cellulose, pectin, and hemicellulose), resistant starch, and non-digestible oligosaccharides (such as fructo-oligosaccharide and xylo-oligosaccharide). Non-digestible carbohydrates play a significant role in balancing the gut microbial ecology and overall health of the swine by promoting the production of short chain fatty acids. Although non-digestible carbohydrates are rich in energy, swine cannot extract this energy on their own due to the absence of enzymes required for their degradation. Instead, they rely on gut microbes to utilize these carbohydrates for energy production. Despite the importance of non-digestible carbohydrate degradation, limited studies have been conducted on the swine gut microbes involved in this process. While next-generation high-throughput sequencing has aided in understanding the microbial compositions of the swine gut, specific information regarding the bacteria involved in non-digestible carbohydrate degradation remains limited. Therefore, it is crucial to investigate and comprehend the bacteria responsible for the breakdown of non-digestible carbohydrates in the gut. In this mini review, we have discussed the major bacteria involved in the fermentation of different types of non-digestible carbohydrates in the large intestine of swine, shedding light on their potential roles and contributions to swine nutrition and health.

Development of the standard mouse model for human bacterial vaginosis induced by Gardnerella vaginalis.

Bacterial vaginosis (BV) is a polymicrobial syndrome characterized by a diminished number of protective bacteria in the vaginal flora. Instead, it is accompanied by a significant increase in facultative and strict anaerobes, including Gardnerella vaginalis (G. vaginalis). BV is one of the most common gynecological problems experienced by reproductive age-women. Because an ideal and standard animal model for human BV induced by G. vaginalis is still underdeveloped, the main objective of this study was to develop a mouse model for human BV induced by G. vaginalis to demonstrate the clinical attributes observed in BV patients. A total of 80 female ICR mice were randomly assigned to 4 groups and intravaginally inoculated with different doses of G. vaginalis: NC (uninfected negative control), PC1 (inoculated with 1 × 105 CFU of G. vaginalis), PC2 (inoculated with 1 × 106 CFU of G. vaginalis) and PC3 (inoculated with 1 × 107 CFU of G. vaginalis). The myeloperoxidase (MPO) activity and serum concentrations of cytokines (IL-1ß, IL-10) in mice administered with G. vaginalis were significantly higher than those of the control group. Gross lesion and histopathological analysis of reproductive tract of mice inoculated with G. vaginalis showed inflammation and higher epithelial cell exfoliation compared to the control group. In addition, vaginal swabs from the mice inoculated with G. vaginalis showed the presence of clue cells, which are a characteristic feature of human BV. Altogether, our results suggested that G. vaginalis is sufficient to generate comparable clinical attributes seen in patients with BV.