RESUMEN
In laser-driven inertial confinement fusion (ICF) facilities, nonuniform laser irradiation can cause significant challenges, such as hydrodynamics instability and laser plasma instability, which hinder the success of fusion. This article presents a new idea for improving the uniformity of far-field laser irradiation through a method of single-beam polarization smoothing. The method involves modulating full Poincaré beams using stress-engineered optics made from fused silica. We designed a stress birefringence system and conducted opto-mechanical modeling and analysis on it. The article elaborates on the mechanism and principles of generating large-aperture full Poincaré beams by stress birefringence, as well as the mechanism of polarization smoothing by full Poincaré beams. Near-field polarization measurements were conducted to verify these mechanisms, and the effectiveness of this method in improving the uniformity of laser irradiation in the target area was evaluated through far-field optical tests.
RESUMEN
In this paper, we investigate the theory of energy distribution when divergent light undergoes harmonic conversion in KDP crystals, and based on this theory, we design and construct a precision measuring instrument for the detuning angle of (KDP) Crystals (MIDC). The device can obtain the detuning angle of the crystal by a single measurement with an average measurement error of 72.78 urad. At the same time, it also has the function of scanning the full aperture of the crystals. Using the MIDC, it is possible to quickly measure the KDP crystal at a single point and quickly scan the crystal detuning angle at full aperture. In addition, we conduct a theoretical study on the variation of detuning angle caused by gravity-influencing factors under online conditions, propose an optimization formula for the offline measurement results of detuning angle, and calculate the optimized values of detuning angle for two kinds of crystals under 45° online conditions. We finally study the error source of the MIDC device, analyze the trend of the influence of positioning errors of the crystal and optical elements on the detuning angle measurement results, and provide theoretical support for the error monitoring and correction of MIDC.
RESUMEN
We propose a method to obtain the detuning angles of a frequency converter by tripling the frequency of a divergent Gaussian beam. The frequency tripling process of the divergent beam was first simulated. It is found that the detuning angles of the frequency converter are linearly related to the position of the maximum light intensity point of the third harmonic laser. The corresponding experiment was conducted, and the results agreed well with the theoretical analysis. This method measures the detuning angles of the frequency converter in only one measurement and within 1 min. The detuning angle measurement errors of KDP and KD*P crystals are less than 10 µrad and 36.5-61.9 µrad, respectively.
RESUMEN
Low-frequency conversion efficiency severely limits the 3ω ultraviolet energy density at the target of inertial confinement fusion facilities. Here, we present a bio-inspired surface aberration mitigation (SAM) technique that could significantly reduce the crystal surface aberration and realize high frequency conversion efficiency over a clear aperture of 400 mm × 400 mm. Numerical models are utilized to optimize and verify the mechanical properties and physical performance of the SAM technique. In addition, the influences of various operation conditions on surface aberration, angle-detuning magnitude, and frequency conversion efficiency are illustrated. Finally, the process stability and online feasibility of this new approach are validated by the established offline characterization system and in situ imaging system.