Direct immobilization of avidin protein on AFM tip functionalized by acrylic acid vapor at RF plasma.

The atomic force microscopy (AFM) has been used as a force sensor to measure unbinding forces of single bound complexes in the nanonewton and piconewton range. Force spectroscopy measurements can be applied to study both intermolecular and intramolecular interactions of complex biological and synthetic macromolecules. Although the AFM has been extensively used as a nano force sensor, the commercially available cantilever is limited to silicon and silicon nitride. Those materials reduce the adhesion sensitivity with specific surface and/or molecule. Here, we functionalized the AFM tip with carboxylic groups by applying acrylic acid (AA) vapor at radio frequency plasma treatment at 100 W for 5 min. This method provides a remarkable sensitivity enhancement on the functional group interaction specificity. The functionalized tip was characterized by scanning electron microscopy. The electron beam high resolution images have not shown significant tip sharpness modification. Silicon wafers (1 0 0)-no treated and functionalized by AA plasma treatment-were characterized by Auger electron spectroscopy to elucidate the silicon surface sputtering and demonstrate functionalization. The Fourier transform-infrared spectroscopy spectrum shows a high absorbance of avidin protein over the silicon surface functionalized by AA plasma treatment.We carried out force spectroscopy assay to measure the unbinding force between the well-established pair biotin-avidin. At pulling speed of 2 µm/s, we measured the unbinding force of 106 ± 23 pN, which is in good agreement with the literature, demonstrating the effectiveness of the tip functionalization by AA plasma treatment in biological studies.

Cidofovir inhibits genome encapsidation and affects morphogenesis during the replication of vaccinia virus.

Cidofovir (CDV) is one of the most effective antiorthopoxvirus drugs, and it is widely accepted that viral DNA replication is the main target of its activity. In the present study, we report a detailed analysis of CDV effects on the replicative cycles of distinct vaccinia virus (VACV) strains: Cantagalo virus, VACV-IOC, and VACV-WR. We show that despite the approximately 90% inhibition of production of virus progeny, virus DNA accumulation was reduced only 30%, and late gene expression and genome resolution were unaltered. The level of proteolytic cleavage of the major core proteins was diminished in CDV-treated cells. Electron microscopic analysis of virus-infected cells in the presence of CDV revealed reductions as great as 3.5-fold in the number of mature forms of virus particles, along with a 3.2-fold increase in the number of spherical immature particles. A detailed analysis of purified virions recovered from CDV-treated cells demonstrated the accumulation of unprocessed p4a and p4b and nearly 67% inhibition of DNA encapsidation. However, these effects of CDV on virus morphogenesis resulted from a primary effect on virus DNA synthesis, which led to later defects in genome encapsidation and virus assembly. Analysis of virus DNA by atomic force microscopy revealed that viral cytoplasmic DNA synthesized in the presence of CDV had an altered structure, forming aggregates with increased strand overlapping not observed in the absence of the drug. These aberrant DNA aggregations were not encapsidated into virus particles.

Dynamic force microscopy imaging of plasmid DNA and viral RNA.

Plasmid DNA and viral RNA were imaged in a liquid environment by dynamic force microscopy (DFM) and fine structures of DNA with heights of 1.82+/-0.66 nm were obtained in topographical images. In simultaneously acquired phase images, DNA could be imaged with better contrast at lower imaging forces. By splitting the cantilever oscillation signal into lower and upper parts, the contribution of the adhesion between tip and sample to the topographical images was eliminated, resulting in better signal-to-noise ratio. DFM of the single stranded RNA genome of a human rhinovirus showed loops protruding from a condensed RNA core, 20-50 nm in height. The mechanical rigidity of the RNA was determined by single molecule pulling experiments. From fitting RNA stretching curves to the Worm-Like-Chain (WLC) model a persistence length of 1.0+/-0.17 nm was obtained.

Chemical treatment of mica for atomic force microscopy can affect biological sample conformation.

An important aspect in the preparation of substrate materials to use in atomic force microscopy lies in the question of interactions introduced by treatments designed to immobilize the sample over the substrate. Here we used a mica substrate that was chemically modified with cationic nickel to immobilize actin filaments (F-actin). Chemical modification could be followed quantitatively by measuring the interaction force between the scanning tip and the mica surface. This approach allowed us to observe polymeric F-actin in a structure that resembles an actin gel. It also improved sample throughput and conferred sample stability as well as repeatability from run to run.

Biomarkers to assess the efficiency of treatment with platinum-based drugs: what can metallomics add?

Since the approval of cisplatin as an antineoplastic drug, the medical and the scientific communities have been concerned about the side effects of platinum-based drugs, and this has been the dose-limiting factor that leads to reduced treatment efficiency. Another important issue is the intrinsic or acquired resistance of some patients to treatment. Identifying proper biomarkers is crucial in evaluating the efficiency of a treatment, assisting physicians in determining, at early stages, whether or not the patient presents resistance to the drug, minimizing severe side effects, and allowing them to redirect the established course of chemotherapy. A great effort is being made to identify biomarkers that can be used to predict the outcome of the treatment of cancer patients with platinum-based drugs. In this context, the metallomic approach has not yet been used to its full potential. Since the basis of these drugs is platinum, the monitoring of biomarkers containing this metal should be the natural approach to evaluate treatment progress. This review intends to show where the research in this field stands and points out some gaps that can be filled by metallomics.

Sugarcane cell wall structure and lignin distribution investigated by confocal and electron microscopy.

Lignocellulosic plant cell wall is considered a potential source for second generation biofuels. The plant cell wall is a highly complex structure mainly composed of cellulose, hemicelluloses, and lignin that form a network of crosslinked fibers. The structural organization of the sugarcane cell wall has not been previously analyzed in detail, and this analysis is a prerequisite for further studies on the recalcitrance and deconstruction of its biomass. In this work, cellulose and lignin localization were investigated by confocal laser scanning microscopy. In addition, the internode sugarcane cell wall structural organization was analyzed by electron microscopy. Internode stem anatomy showed a typical monocot structure consisting of epidermis, hypoderm, and vascular bundles scattered throughout ground parenchyma tissue and surrounded by sclerenchyma fibers. Confocal images of safranin labeled sugarcane showed that lignin distribution was predominant in the vessel elements, cell wall corners (CC), and middle lamella (ML), while cellulose-rich cell walls were randomly distributed in the ML and organized in the other cell wall layers. KMnO4 cytochemistry revealed that lignin was predominantly distributed in secondary cell walls, ML and CC. Cell wall sublayers (S1, S2, and S3) were identified and measured by transmission electron microscopy. Our results provide insights that may help further understanding of sugarcane cell wall organization, which is crucial for the research and technology of plant-based biofuel production.

Growth of crystalline hydroxyapatite thin films at room temperature by tuning the energy of the RF-magnetron sputtering plasma.

Right angle radio frequency magnetron sputtering technique (RAMS) was redesigned to favor the production of high-quality hydroxyapatite (HA) thin coatings for biomedical applications. Stoichiometric HA films with controlled crystallinity, thickness varying from 254 to 540 nm, crystallite mean size of 73 nm, and RMS roughness of 1.7 ± 0.9 nm, were obtained at room temperature by tuning the thermodynamic properties of the plasma sheath energy. The plasma energies were adjusted by using a suitable high magnetic field confinement of 143 mT (1430 G) and a substrate floating potential of 2 V at the substrate-to-magnetron distance of Z = 10 mm and by varying the sputtering geometry, substrate-to-magnetron distance from Z = 5 mm to Z = 18 mm, forwarded RF power and reactive gas pressure. Measurements that were taken with a Langmuir probe showed that the adjusted RAMS geometry generated a plasma with an adequate effective temperature of Teff ≈ 11.8 eV and electron density of 2.0 × 10(15) m(-3) to nucleate nanoclusters and to further crystallize the nanodomains of stoichiometric HA. The deposition mechanism in the RAMS geometry was described by the formation of building units of amorphous calcium phosphate clusters (ACP), the conversion into HA nanodomains and the crystallization of the grain domains with a preferential orientation along the HA [002] direction.

Measuring the strength of interaction between the Ebola fusion peptide and lipid rafts: implications for membrane fusion and virus infection.

The Ebola fusion peptide (EBO16) is a hydrophobic domain that belongs to the GP2 membrane fusion protein of the Ebola virus. It adopts a helical structure in the presence of mimetic membranes that is stabilized by the presence of an aromatic-aromatic interaction established by Trp8 and Phe12. In spite of its infectious cycle becoming better understood recently, several steps still remain unclear, a lacuna that makes it difficult to develop strategies to block infection. In order to gain insight into the mechanism of membrane fusion, we probed the structure, function and energetics of EBO16 and its mutant W8A, in the absence or presence of different lipid membranes, including isolated domain-resistant membranes (DRM), a good experimental model for lipid rafts. The depletion of cholesterol from living mammalian cells reduced the ability of EBO16 to induce lipid mixing. On the other hand, EBO16 was structurally sensitive to interaction with lipid rafts (DRMs), but the same was not observed for W8A mutant. In agreement with these data, W8A showed a poor ability to promote membrane aggregation in comparison to EBO16. Single molecule AFM experiments showed a high affinity force pattern for the interaction of EBO16 and DRM, which seems to be a complex energetic event as observed by the calorimetric profile. Our study is the first to show a strong correlation between the initial step of Ebola virus infection and cholesterol, thus providing a rationale for Ebola virus proteins being co-localized with lipid-raft domains. In all, the results show how small fusion peptide sequences have evolved to adopt highly specific and strong interactions with membrane domains. Such features suggest these processes are excellent targets for therapeutic and vaccine approaches to viral diseases.

Adsorption and bioactivity studies of albumin onto hydroxyapatite surface.

Bovine serum albumin (BSA) may have an inhibitory or promoter effect on hydroxyapatite (HA) nucleation when apatite is precipitated in a medium containing the protein. In this study we evaluated the influence of BSA on the precipitation of calcium phosphate phases (CP) from simulated body fluid (SBF) when the protein was previously bounded to HA surface. The kinetics of BSA immobilization onto hydroxyapatite surface was performed in different buffers and protein concentrations in order to adjust experimental conditions in which BSA was tightly linked to HA surface for long periods in SBF solution. It was shown that for BSA concentration higher than 0.1mg/mL the adsorption to HA surface followed Langmuir-Freundlich mechanisms, which confirmed the existence of cooperative protein-protein interactions on HA surface. Fourier Transformed Infrared Attenuated Total Reflectance Microscopy (FTIRM-ATR) evidenced changes in BSA conformational state in favor of less-ordered structure. Analyses from high resolution grazing incident X-ray diffraction using synchrotron radiation (GIXRD), Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) showed that a poorly crystalline calcium phosphate was precipitated on the surface of HA discs coated with BSA, after the immersion in SBF for 4 days. The new bioactive layer had morphological characteristics similar to the one formed on the HA surface without protein. It was identified as a carbonated apatite with preferential crystal growth along apatite 002 direction. The GIXRD results also revealed that BSA layer bound to the surface inhibited the HA dissolution leading to a reduction on the formation of new calcium phosphate phase.

Spontaneous formation of nucleic acid-based nanoparticles is responsible for high interferon-alpha induction by CpG-A in plasmacytoid dendritic cells.

Plasmacytoid dendritic cells (PDC) represent a highly specialized immune cell subset that produces large quantities of the anti-viral cytokines type I interferons (IFN-alpha and IFN-beta) upon viral infection. PDC employ a member of the family of toll-like receptors, TLR9, to detect CpG motifs (unmethylated CG dinucleotides in certain base context) present in viral DNA. A certain group of CpG motif-containing oligodeoxynucleotides (CpG ODN), CpG-A, was the first synthetic stimulus available that induced large amounts of interferon-alpha (IFN-alpha) in PDC. However, the mechanism responsible for this activity remained elusive. CpG-A is characterized by a central palindrome and poly(G) at the 5' and 3' end. Here we demonstrate that CpG-A self-assembles to higher order tertiary structures via G-tetrad formation of their poly(G) motifs. Spontaneous G-tetrad formation of CpG-A required the palindrome sequence allowing structure formation in a physiological environment. Once formed, G-tetrad-linked structures were stable even under denaturing conditions. Atomic force microscopy revealed that the tertiary structures formed by CpG-A represent nucleic acid-based nanoparticles in the size range of viruses. Similarly sized preformed polystyrene nanoparticles loaded with a CpG ODN that is otherwise weak at inducing IFN-alpha (CpG-B) gained the potency of CpG-A to induce IFN-alpha. Higher ODN uptake in PDC was not responsible for the higher IFN-alpha-inducing activity of CpG-A or of CpG-B-coated nanoparticles as compared with CpG-B. Based on these results we propose a model in which the spatial configuration of CpG motifs as particle is responsible for the virus-like potency of CpG-A to induce IFN-alpha in PDC.

Atomic Force Microscopy as a Tool in Nanobiology Part II: Force Spectroscopy in Genomics and Proteomics.

We present possible applications of Atomic Force Microscopy (AFM) as a force spectroscopy tool in genomics and proteomics. AFM applications in these fields have opened new opportunities for studying the mechanical properties of biomolecules and their interactions in their native environment, as well as in determining the binding affinity of DNA proteins in dependence with the target DNA sequence for further correlative studies on physical affinity and biological relevance of the controlled gene. Furthermore, force spectroscopy is a powerful analytical tool to investigate structural and functional features of biomolecules. Altogether, these tools have revealed useful application in genomics and proteomics.

Fibrillar aggregates of the tumor suppressor p53 core domain.

Alzheimer's disease, Parkinson's disease, cystic fibrosis, prion diseases, and many types of cancer are considered to be protein conformation diseases. Most of them are also known as amyloidogenic diseases due to the occurrence of pathological accumulation of insoluble aggregates with fibrillar conformation. Some neuroblastomas, carcinomas, and myelomas show an abnormal accumulation of the wild-type tumor suppressor protein p53 either in the cytoplasm or in the nucleus of the cell. Here we show that the wild-type p53 core domain (p53C) can form fibrillar aggregates after mild perturbation. Gentle denaturation of p53C by pressure induces fibrillar aggregates, as shown by electron and atomic force microscopies, by binding of thioflavin T, and by circular dichroism. On the other hand, heat denaturation produced granular-shaped aggregates. Annular aggregates similar to those found in the early aggregation stages of alpha-synuclein and amyloid-beta were also observed by atomic force microscopy immediately after pressure treatment. Annular and fibrillar aggregates of p53C were toxic to cells, as shown by MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] reduction assay. Interestingly, the hot-spot mutant R248Q underwent similar aggregation behavior when perturbed by pressure or high temperature. Fibrillar aggregates of p53C contribute to the loss of function of p53 and seed the accumulation of conformationally altered protein in some cancerous cells.